replace words in text with other words from a word list

[vin1]

i need a script that can replace words in text with other words from a words list

it has to have 2 edit boxes input/output and a button "run"

from word_list.txt it choses which word to replace with. words are separated with commas for multiple choice

 

 

 

 

 

expandcollapse popup

; AutoIt GUI Example
; Created: 17/01/2005 - CyberSlug
; Modifed: 05/12/2011 - guinness
; Modifed: 09/06/2014 - mLipok

#Region INCLUDE
#include <AVIConstants.au3>
#include <GuiConstantsEx.au3>
#include <TreeViewConstants.au3>
#EndRegion INCLUDE

#Region GUI
GUICreate("Sample GUI", 400, 420)
GUISetIcon(@SystemDir & "\mspaint.exe", 0)
#EndRegion GUI



#Region EDIT
GUICtrlCreateEdit(@CRLF & "  Sample Edit Control", 10, 10, 380, 175)
GUICtrlSetTip(-1, '#Region EDIT')
#EndRegion EDIT

#Region EDIT2
GUICtrlCreateEdit(@CRLF & "  Sample Edit Control", 10, 185, 380, 175)
GUICtrlSetTip(-1, '#Region EDIT')
#EndRegion EDIT2

#Region BUTTON
GUICtrlCreateButton("Sample Button", 10, 360, 100, 30)
GUICtrlSetTip(-1, '#Region BUTTON')
#EndRegion BUTTON

#Region GUI MESSAGE LOOP
GUISetState(@SW_SHOW)
While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            ExitLoop

    EndSwitch
WEnd

GUIDelete()
#EndRegion GUI MESSAGE LOOP

 

Edited April 20, 2018 by vin1

[Earthshine]

well, you had better get busy with that 

where is the code that does the selection and such that you have tried?  

I think a Moderator already has this covered....

This code is taken directly from that post--Written by Moderator @Melba23, for your convenience, and it works, I just tested it. You could the adapt the algorithm for your needs. but you would need an appropriate  array to store your data (or use a database, each word could have multiple records associated with it and do it that way).

 

expandcollapse popup

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <EditConstants.au3>
#include <Array.au3>
#Include <GuiListBox.au3>

Global $hGUI, $cInput, $cList, $sPartialData, $asKeyWords[100]

; Create list full of random 5 character "words"
Keywords()

$hGUI = GUICreate("Example", 200, 400)

$cInput = GUICtrlCreateInput("", 5, 5, 190, 20)
$cList = GUICtrlCreateList("", 5, 30, 190, 325, BitOR(0x00100000, 0x00200000))
$cButton = GUICtrlCreateButton("Read", 60, 360, 80, 30)
$cUP = GUICtrlCreateDummy()
$cDOWN = GUICtrlCreateDummy()
$cENTER = GUICtrlCreateDummy()
GUISetState(@SW_SHOW, $hGUI)

; Set accelerators for Cursor up/down and Enter
Dim $AccelKeys[3][2]=[["{UP}", $cUP], ["{DOWN}", $cDOWN], ["{ENTER}", $cENTER]]
GUISetAccelerators($AccelKeys)

$iCurrIndex = -1

GUIRegisterMsg($WM_COMMAND, "_WM_COMMAND")

While 1

    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $cList
            $sChosen = GUICtrlRead($cList)
            If $sChosen <> "" Then GUICtrlSetData($cInput, $sChosen)
        Case $cButton
            If $sPartialData <> "" Then
                $sFinal = GUICtrlRead($cInput)
                If _ArraySearch($asKeyWords, $sFinal) > 0 Then
                    MsgBox(0, "Chosen", $sFinal)
                EndIf
            EndIf
        Case $cUP
            If $sPartialData <> "" Then
                $iCurrIndex -= 1
                If $iCurrIndex < 0 Then $iCurrIndex = 0
                _GUICtrlListBox_SetCurSel($cList, $iCurrIndex)
            EndIf
        Case $cDOWN
            If $sPartialData <> "" Then
                $iTotal = _GUICtrlListBox_GetCount($cList)
                $iCurrIndex += 1
                If $iCurrIndex > $iTotal - 1 Then $iCurrIndex = $iTotal - 1
                _GUICtrlListBox_SetCurSel($cList, $iCurrIndex)
            EndIf
        Case $cENTER
            If $iCurrIndex <> -1 Then
                $sText = _GUICtrlListBox_GetText($cList, $iCurrIndex)
                GUICtrlSetData($cInput, $sText)
                $iCurrIndex = -1
                _GUICtrlListBox_SetCurSel($cList, $iCurrIndex)
            EndIf
    EndSwitch

WEnd

Func CheckInputText()

    $sPartialData = "|" ; Start with delimiter so new data always replaces old
    Local $sInput = GUICtrlRead($cInput)
    If $sInput <> "" Then
        For $i = 0 To 99
            If StringInStr($asKeyWords[$i], $sInput) <> 0 Then $sPartialData &= $asKeyWords[$i] & "|"
        Next
        GUICtrlSetData($cList, $sPartialData)
    EndIf
EndFunc   ;==>CheckInputText

Func Keywords()

    Local $sData
    For $i = 0 To 99
        $asKeyWords[$i] = Chr(Random(65, 90, 1)) & Chr(Random(65, 90, 1)) & Chr(Random(65, 90, 1)) & Chr(Random(65, 90, 1))
        $sData &= $asKeyWords[$i] & "|"
    Next
    GUICtrlSetData($cList, $sData)
    $iCurrIndex = -1
    _GUICtrlListBox_SetCurSel($cList, $iCurrIndex)

EndFunc   ;==>Keywords

Func _WM_COMMAND($hWnd, $iMsg, $wParam, $lParam)

     ; If it was an update message from our input
    If _WinAPI_HiWord($wParam) = $EN_CHANGE And _WinAPI_LoWord($wParam) = $cInput Then
       CheckInputText()
    EndIf

EndFunc

 

 

 

Edited April 20, 2018 by Earthshine

[Earthshine]

also, sounds like you need a Dictionary (in your case a Thesaurus). check this thread

Code from sample that I tested. Works as Dictionary

expandcollapse popup

#Include <GUIListBox.au3>

Global $Ini = @ScriptDir & "\Dictionary.ini"
Global $Found
Global $WordCount
IniWrite($Ini, "Dictionary", "", "")

$GUI = GUICreate("Dictionary", 474, 336)
GUICtrlCreateLabel("Search:", 0, 0, 48, 17)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
$SearchInput = GUICtrlCreateInput("", 0, 16, 121, 21)
$Search = GUICtrlCreateButton("Search", 120, 16, 43, 21, 0)
GUICtrlCreateLabel("Dictionary Entries:", 0, 40, 89, 17)
$DictionaryEntries = GUICtrlCreateList("", 0, 56, 121, 279)
$AddEntry = GUICtrlCreateButton("Add Entry", 120, 56, 75, 25, 0)
$DeleteEntry = GUICtrlCreateButton("Delete Entry", 120, 88, 75, 25, 0)
$EditEntry = GUICtrlCreateButton("Edit Entry", 120, 120, 75, 25, 0)
$PronounceEntryName = GUICtrlCreateButton("Pronounce Entry Name", 200, 56, 123, 25, 0)
$PronounceEntryDefinition = GUICtrlCreateButton("Pronouce Entry Definition", 200, 88, 123, 25, 0)
GUICtrlCreateLabel("Entry Definition:", 120, 152, 78, 17)
$EntryDefinition = GUICtrlCreateEdit("", 120, 169, 353, 163, 0x0004)
$About = GUICtrlCreateButton("About", 398, 0, 75, 25, 0)
_PopulateDictionaryList()
GUISetState(@SW_SHOW)

While 1
    WinSetTitle($GUI, "", "Dictionary - "&$WordCount&" words present.")
    Switch GUIGetMsg()
        Case - 3
            Exit
        Case $DictionaryEntries
            _GetDefinition()
        Case $Search
            _Search()
        Case $AddEntry
            _NewEntry()
        Case $DeleteEntry
            _DeleteEntry()
        Case $EditEntry
            _EditEntry()
        Case $PronounceEntryName
            $Speak = ObjCreate("Sapi.SPVoice")
            $Speak.Speak(GUICtrlRead($DictionaryEntries))
        Case $PronounceEntryDefinition
            $Speak = ObjCreate("Sapi.SPVoice")
            $Speak.Speak(GUICtrlRead($EntryDefinition))
        Case $About
            MsgBox(64, "About", "Dictionary copyright Justin Reno 2008.")
    EndSwitch
WEnd

Func _PopulateDictionaryList()
    If FileExists($Ini) Then
        If $WordCount <> "" Then $WordCount = ""
        $GetEntries = IniReadSection($Ini, "Dictionary")
        GUICtrlSetData($DictionaryEntries, "")
        For $A = 1 To $GetEntries[0][0]
            $WordCount += 1
            _GUICtrlListBox_AddString ($DictionaryEntries, $GetEntries[$A][0])
        Next
    EndIf
EndFunc   ;==>_PopulateDictionaryList

Func _GetDefinition()
    If FileExists($Ini) Then
        $GetEntries = IniReadSection($Ini, "Dictionary")
        For $B = 1 To $GetEntries[0][0]
            If $GetEntries[$B][0] = GUICtrlRead($DictionaryEntries) Then GUICtrlSetData($EntryDefinition, $GetEntries[$B][1])
        Next
    EndIf
EndFunc

Func _Search()
    If FileExists($Ini) Then
        $GetEntries = IniReadSection($Ini, "Dictionary")
        For $C = 1 To $GetEntries[0][0]
            If GUICtrlRead($SearchInput) = $GetEntries[$C][0] Then $Found = $GetEntries[$C][0]
        Next
        If $Found <> "" Then _GUICtrlListBox_SetCurSel ($DictionaryEntries, _GUICtrlListBox_SelectString ($DictionaryEntries, $Found))
    EndIf
EndFunc   ;==>_Search

Func _NewEntry()
    $GUI = GUICreate("New Entry", 122, 106, -1, -1, -1, 0x80)
    GUICtrlCreateLabel("Entry Word:", 0, 0, 60, 17)
    $EntryWord = GUICtrlCreateInput("", 0, 16, 121, 21)
    GUICtrlCreateLabel("Entry Definition:", 0, 40, 78, 17)
    $EntryDefinition = GUICtrlCreateInput("", 0, 56, 121, 21)
    $AddEntry = GUICtrlCreateButton("Add Entry", 0, 80, 121, 25, 0)
    GUISetState(@SW_SHOW)
    While 1
        Switch GUIGetMsg()
            Case - 3
                GUIDelete($GUI)
                ExitLoop
            Case $AddEntry
                If FileExists($Ini) Then
                    $GetEntries = IniReadSection($Ini, "Dictionary")
                    For $D = 1 To $GetEntries[0][0]
                        If $GetEntries[$D][0] = GUICtrlRead($EntryWord) Then
                            MsgBox(16, "Error", "Word to be added already exists!")
                            GUIDelete($GUI)
                            ExitLoop
                        EndIf
                    Next
                EndIf
                IniWrite($Ini, "Dictionary", GUICtrlRead($EntryWord), GUICtrlRead($EntryDefinition))
                If @Compiled = 0 Then Run(@AutoItExe & " " & FileGetShortName(@ScriptFullPath))
                If @Compiled = 1 Then Run (@ScriptFullPath)
                Exit
        EndSwitch
    WEnd
EndFunc   ;==>_NewEntry

Func _DeleteEntry()
    If GUICtrlRead($DictionaryEntries) <> "" Then IniDelete($Ini, "Dictionary", GUICtrlRead($DictionaryEntries))
    _PopulateDictionaryList()
EndFunc

Func _EditEntry()
    $GUI = GUICreate("Edit Entry", 123, 106, -1, -1, -1, 0x80)
    GUICtrlCreateLabel("Entry Word:", 0, 0, 60, 17)
    $EntryWord = GUICtrlCreateInput(GUICtrlRead($DictionaryEntries), 0, 16, 121, 21)
    GUICtrlCreateLabel("Entry Definition:", 0, 40, 78, 17)
    $EntryDefinition = GUICtrlCreateInput("", 0, 56, 121, 21)
    $SaveEntry = GUICtrlCreateButton("Save Entry", 0, 80, 121, 25, 0)
    GUISetState(@SW_SHOW)
    While 1
        Switch GUIGetMsg()
            Case - 3
                GUIDelete($GUI)
                ExitLoop
            Case $SaveEntry
                IniWrite($Ini, "Dictionary", GUICtrlRead($EntryWord), GUICtrlRead($EntryDefinition))
                _PopulateDictionaryList()
                GUIDelete($GUI)
                If @Compiled = 0 Then Run(@AutoItExe & " " & FileGetShortName(@ScriptFullPath))
                If @Compiled = 1 Then Run (@ScriptFullPath)
                Exit
        EndSwitch
    WEnd
EndFunc   ;==>_EditEntry

You can bend Dictionary.ini to your will look at it's structure and replace with your words and values.

Dictionary.ini

Edited April 20, 2018 by Earthshine

[BrewManNH]

If someone types a multi-word sentence in the first box, do you want to replace EVERY word in the sentence, some of the words, highlighted words, specific words? You're not giving us any help here. We'd need the word list, plus a lot of before and after examples of what you're looking to do.

Looking at your screenshot of the word list, I'd turn it into an INI file and work with that instead.

[Melba23]

vin1,

This looks like a basic plagiarism tool. Before we go any further, just exactly why do you want to do this?

M23

[vin1]

I'll use it to rewrite articles from online websites. I'll try to create a rephrase version that rearranges text differently than the source text

 

please help if possible

Edited April 20, 2018 by vin1

[Melba23]

vin1,

So my guess was right. No help for you - write your own material. Thread locked.

M23