Jump to content

Auto IT Read Value from windows Pop UP - (Moved)


Recommended Posts

Hello,

i am new to AUTO IT development , I would like one help to read value from a POP up.

i am able to read below values using inspect tool , information given below, I tried to create a script to read value but that does not help. any help is appreciated.

Available Controls

POPUP window Controls

Auto Id = "UpdateNow_Btn"
Name = Update Now
Invoke - Button Control

Below Controls i get when i move inspector tool to the text which i need to read. i need to read the text Name . Currently with my code i get only blank text 

Auto Id = timeOutLb
ClassName = TextBlock
LegacyIAccess = GetName
Name  = Read Value for Name
 

My code.

Quote

 

#include <ScreenCapture.au3>
#include<_XMLDomWrapper.au3>
#include <Array.au3>
#include <Inet.au3>
#include <GUIConstantsEx.au3>
#include <GUIConstantsEx.au3>
#include <GuiButton.au3>
#include <WindowsConstants.au3>
#include <GUISlider.au3>
#include <GuiConstants.au3>
#include <GuiTab.au3>


$name=@ComputerName
$result="Pass"
$String=""

$WinTitle=WinGetTitle("[Class:TextBlock]")
winwait($WinTitle,"",5)
WinWaitActive($WinTitle)
Sleep(1000)

$timezone=ControlGetText("timeOutLb","","Name")
$clockname=ControlGetText("TextBlock","","ClassName")
$val="timezone="&$timezone&"~"&"clockname="&$clockname&"~"&"checked="
Sleep(3000)
writeResult("Default","Clock1",$name&"~"&$result&"~"&$val)
ConsoleWrite($val)


 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By WilliamasKumeliukas
      2021.07.15 News: Project is NOT dead! I am still very devoted into accomplishing this project, I am spending my every bit of energy that is left at end of the day (when there is any) for this project and it really does challenge my knowledge in AutoIt language but I won't give up  
      Hi,
      I started this project alone in May 2020 as project in my spare time at work, I'm working for a IT company that started opening their services to residential customers few months ago and now my position in the company kind of drifted in the doom and gloom world of repetitive tasks like: Reinstallation + Configuration of Windows 10.
      The procedure is very repetitive and I started feeling like being a robot which is the main reason I started this project.
       
      ==============================FAQ==================================
      1. Q: Do you want this project to be accomplished with the usage of AutoIt ONLY or 3rd party tools / Scripts (BATCH / POWERSHELL / VB) ? A: No, if I cannot find a way using AutoIt to accomplish a task I will move to my Plan B which consist of automating an 3rd party tool to accomplish the affected task until a solution is found. 2. Q: What do I get from helping/collaborating in this project? A: I will personally take the responsibility to mention you in the credits of this project. 3. Q: If I have more questions, can I ask? A: Certainly! feel free to ask any questions related to this project! 4. Q: What is the main goal of this project? A: Automating Windows 10 configuration without user interaction needed (as much as possible) ______________________________________________________________________________________________________________________________
      Current progression of the project (more will be added in future)
      « Blue = Info || Yellow = Unfinished/Untested || Purple = Could be better || Green = Done ||Red = Not Yet Started »
      ***Very early Stage ***
      Connect Network Attached Storage(NAS) (Work but missing configuration in GUI - AutoIt only)
      Download & Install up to 600+ softwares (Tested & Working - using 3rd party tool + 50/50 Powershell/AutoIt)
       Auto prediction of Apps name of text typed inside input (Tested & Working - AutoIt Only)
      Change OEM Informations (Tested & Working -  AutoIt)
      Disable hibernation (Tested & Working - AutoIt only)
      Change Computer Name (Work but require testing - AutoIt only) 
      Show Computer Information and Smart status on GUI (Tested & Working - AutoIt Only)
      Change .pdf / .pdfxml from Edge to Adobe Reader DC (Tested & Working - using 3rd party tool)
      Change Edge to Google Chrome as Default Browser (Tested & Working - using 3rd party tool)
      Windows Updater (Seems to work but require further testing - AutoIt only)
      Install Office 365 / 2013 + Activation (To Do)
      Add L2TP VPN Configuration in Windows Built-in VPN (To Do)
      Save / Load tasks configuration profile in (.ini file) to avoid repeating same configuration twice (In progress - AutoIt Only)
      (EXPERIMENTAL) Install Apps from Microsoft Store with UIAutomation UDF made by: @junkew(Work if you know what your doing)
         P.S: Installing Apps from Microsoft Store will require usage of  UIA spy tool made by @LarsJ which you can download & learn how to use it on UIA Spy Tool thread.
      ***  If this project interest you, Reply here This will greatly help me to see if you'd like this project to become real  ***
       
      Download: W10-Configurator.zip  (2021-07-19) 
      Project Website: W10-Configurator on GitHub 
      ______________________________________________________________________________________________________________________________
      Best Regards,
      ~WilliamasKumeliukas
    • By beautifulsoup
      Hi All,
      I'm not sure if its possible that I'm trying to achieve, I've looked into https://www.autoitscript.com/autoit3/scite/docs/SciTE4AutoIt3/AutoIt3Wrapper.html and such resources for help, but I cant really find the answer to my question.
      So upon compiling the script in SciTE, the exe file is given a Description under file Properties>Details. I understand, that  one can enter info manually there and it can even implement the version automatically with each compilation.
       
      What I'm trying to achieve is to somehow include the "@ScriptName" in the Details>File Description Field. But as I see no variable can be taken after "#" in this case.
       
      Do You think its achievable? (Win 10)
       
      Much obliged for taking time on reading this.
       
      Kind Regards,
      Brave


    • By DJ143
      I have a autoit exe file which is used in upload/browse file functionality.  This has been integrated with selenium framework and I am invoking the autoit exe using Java process and runtime. 
      Now the issue is when I run the scripts and invoke the autoit exe in local it works perfectly.  But when I use selenium grid or jenkins to run the scripts in another windows server it is not working.
      Can anyone please suggest any solution for this?
    • By Hermes
      Hello, the script below will read column A from an excel file - and if a value matches in the browser, it will click the corresponding link and click on a specific button to paste the data, then writes "Completed" in Column B. It will continue to read from the excel file and do the same thing for all the remaining rows.
      #Include "Chrome.au3" #Include "wd_core.au3" #Include "wd_helper.au3" #Include "WinHttp.au3" #include <MsgBoxConstants.au3> #include <File.au3> #include <IE.au3> #include <Array.au3> #include <INet.au3> #include <AutoItConstants.au3> #include <WinAPIFiles.au3> #include <GDIPlus.au3> #include <Excel.au3> #Include "WinHttp.au3" #Include "_HtmlTable2Array.au3" Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "table1.html") _WD_LoadWait($sSession) _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") Local $sElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") ;ConsoleWrite ("mat-table " & $sElement & @CRLF) Local $aArray1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//td[contains(@class,'data')]", $sElement, True) sleep(1000) For $i = 0 to UBound($aArray1) - 1 $aArray1[$i] = _WD_ElementAction($sSession, $aArray1[$i], 'text') Next ;_ArrayDisplay($aArray1) ;Email variables $SmtpServer = "" ; address for the smtp-server to use - REQUIRED $FromName = "Hermes" ; name from who the email was sent $FromAddress = "sender@gmail.com" ; address from where the mail should come $ToAddress = "recipient@gmail.com" ; destination address of the email - REQUIRED, use commas (,) to add more email addresses $Subject = "File not found" ; subject from the email - can be anything you want it to be $Body = "File not found!" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed $CcAddress = "" ; address for cc - leave blank if not needed $BccAddress = "" ; address for bcc - leave blank if not needed $Importance = "High" ; Send message priority: "High", "Normal", "Low" $Username = "" ; username for the account used from where the mail gets sent - REQUIRED $Password = "" ; password for the account used from where the mail gets sent - REQUIRED $IPPort = 25 ; port used for sending the mail $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS $tls = 0 ; enables/disables TLS when required Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters If FileExists($sWorkbook) Then ;Check if the file exist. Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters Local $aArray2 = _Excel_RangeRead($oWorkbook,Default,$oWorkbook.ActiveSheet.Usedrange.Columns("A:A")) Local $iIdx Local $Skipline = 0 ;0==> first line Do Local $temprf For $i = 0 To UBound($aArray2) - 1 $temprf &= $aArray2[$i] _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]") Local $aElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]", $sElement, True) $iIdx = _ArraySearch($aArray1, $aArray2[$i]) If @error Then ContinueLoop _WD_ElementAction($sSession, $aElement[$iIdx], 'click') If $i < $Skipline Then ContinueLoop $oRange = $oWorkbook.ActiveSheet.Range("B" & $i + 1 & ":XFD" & $i + 1) _Excel_RangeCopyPaste($oWorkbook.Activesheet, $oRange) ;Paste Local $oTest4 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "pastebutton") _WD_ElementAction($sSession, $oTest4, 'click') Sleep(1000) ;Save Button Local $save3 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "button.button") _WD_ElementAction($sSession, $save3, 'click') _Excel_RangeWrite($oWorkbook, $oWorkbook.Activesheet, "Completed", "B" & $i+1) sleep(1000) Next Until (Not @error) _Excel_Close($oWorkbook) Else _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) Exit EndIf _WD_LoadWait($sSession) ;Attaching files to emails Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ;Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send $objEmail="" EndFunc ;==>_INetSmtpMailCom Local $aDir = _FileListToArrayRec(@TempDir, "scoped_dir*;chrome_*", $FLTAR_FOLDERS, $FLTAR_NORECUR, $FLTAR_NOSORT, $FLTAR_FULLPATH) Sleep(2000) For $i = 1 To $aDir[0] DirRemove($aDir[$i], $DIR_REMOVE) Next _WD_LoadWait($sSession) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome If the excel file doesn't exists in the folder, it will send an email to a specific recipient.
      What i am trying figure out now is if the excel crashes while the script/loop is running, I want to relaunch the excel file continue to the last row before the excel crashed. So if the value of column B is not marked as "completed", it should continue from that row
      Appreciate any help that I can get to achieve this.
      table1.html test.xlsx
    • By adityaparakh
      Hello ,
      I am trying to use Websockets in AutoIt.
      It is to fetch live stock market prices , API is provided and documentation available for python language.
      The link for the code snippet is :
      https://symphonyfintech.com/xts-market-data-front-end-api-v2/#tag/Introduction
      https://symphonyfintech.com/xts-market-data-front-end-api-v2/#tag/Instruments/paths/~1instruments~1subscription/post
       
      https://github.com/symphonyfintech/xts-pythonclient-api-sdk
       
      Second Link is to subscribe to a list of ExchangeInstruments.
      Now I would like to get live stock ltp (LastTradedPrice) for a few stocks whose "ExchangeInstrumentID" I know.
      I am able to use the WinHttp object to perform actions using simple codes like below :
      I have the secretKey and appkey and can generate the needed token. And get the unique ExchangeInstrumentID.

      Below code is just for example of how I am using WinHttp. Unrelated to socket part.
      Global $InteractiveAPItoken = IniRead(@ScriptDir & "\Config.ini", "token", "InteractiveAPItoken", "NA") $baseurl = "https://brokerlink.com/interactive/" $functionurl = "orders" $oHTTP = ObjCreate("winhttp.winhttprequest.5.1") $oHTTP.Open("POST", $baseurl & $functionurl, False) $oHTTP.SetRequestHeader("Content-Type", "application/json;charset=UTF-8") $oHTTP.SetRequestHeader("authorization", $InteractiveAPItoken) $pD = '{ "exchangeSegment": "NSEFO", "exchangeInstrumentID": ' & $exchangeInstrumentID & ', "productType": "' & $producttype & '", "orderType": "MARKET", "orderSide": "' & $orderside & '", "timeInForce": "DAY", "disclosedQuantity": 0, "orderQuantity": ' & $qty & ', "limitPrice": 0, "stopPrice": 0, "orderUniqueIdentifier": "' & $orderidentifier & '"}' $oHTTP.Send($pD) $oReceived = $oHTTP.ResponseText $oStatusCode = $oHTTP.Status
          
          
      But am struggling to understand and use socket.
      Would be of great help if you can have a look at the link mentioned above and help with the code sample for AutoIt.
      To connect and listen to a socket.
      Thanks a lot
       
×
×
  • Create New...