how to get the control class name
-
Similar Content
-
By Skyrimfus
How can i determine wich button was pressed when I use more than one button, without delcaring the button in a variable.
happylukeKhác với các nhà cái trong top 10 nhà cái mà BettingTop10 đã giới thiệu, là các nhà cái chuyên về cá cược thể thao nói chung và cá cược bóng đá nói riêng, HappyLuke là một nhà cái Casino, chuyên về các trò chơi như Baccarat, Xì Dách, Rồng Hổ, Roulette, Sicbo và nhiều trò chơi khác … và không cung cấp dịch vụ cá cược thể thao, cược bóng đá ở thời điểm hiện tại. HappyLuke được cấp phép hoạt động tại Philippines thông qua Tổ Chức Cá Cược Quốc Tế PAGCOR và chấp thuận nghiêm ngặt các quy tắc riêng của mỗi thị trường mà mình tham gia hoạt động.https://top1betting.net/wp-content/uploads/2019/05/choi-bai-truc-tuyen-tai-nha-cai-HappyLuke.png[/img]
Example:
#include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 600, 600, 192, 124) GUISetState(@SW_SHOW) For $i=0 to 5 GUICtrlCreateButton("Button"&$i,0,$i*50,60,30) Next #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case 3 to 8 MsgBox(0,0,"You pressed button:") EndSwitch WEnd
-
By nacerbaaziz
hello sirs, i've created a tool to the blind users, this tool helps the blind to listen to a audio effect when moving between the GUIs controls on they computers
where this tool can get the class for the current focus control and play a sound from a folder
i've added all the knowne classes, but i found some problems i hope any one can help me.
this is the code that i created
#include <WinAPISys.au3> Global $h_CurrentHWNDFocus = "", $h_CurrentControlHWNDFocus = "" AdlibRegister("WindowAudioFocus", 50) Func WindowAudioFocus() Local $h_NewHWNDFocus = WinGetHandle("[active]", "") Local $h_NewControlHWNDFocus = ControlGetFocus($h_NewHWNDFocus, "") If ($h_NewHWNDFocus = $h_CurrentHWNDFocus) And ($h_NewControlHWNDFocus = $h_CurrentControlHWNDFocus) Then Return 0 AdlibUnRegister("WindowAudioFocus") If Not ($h_NewHWNDFocus = $h_CurrentHWNDFocus) Then SoundPlay(@ScriptDir & "\focus_Audio\WindowChanged.wav") Else Switch _WinAPI_GetClassName(ControlGetHandle($h_NewHWNDFocus, "", $h_NewControlHWNDFocus)) Case "Button", "Start", "TrayButton", "TrayShowDesktopButtonWClass", "sbutton", "CirrussButton", "ODbcButton", "ThunderRTCommandButton", "ThunderSSOption", "ThunderSSCommand", "ThunderCommandButton", "ThunderRT6CommandButton", "ThunderRT5CommandButton", "TButton", "TBitBtn", "TAdvGlowButton", "ButtonWndClass", "afx:0:376:baa946", "_AOL_Button" If _IsCheckBox(ControlGetHandle($h_NewHWNDFocus, "", $h_NewControlHWNDFocus)) Then SoundPlay(@ScriptDir & "\focus_Audio\checkBox.wav") ElseIf _IsRadio(ControlGetHandle($h_NewHWNDFocus, "", $h_NewControlHWNDFocus)) Then SoundPlay(@ScriptDir & "\focus_Audio\radio.wav") Else SoundPlay(@ScriptDir & "\focus_Audio\button.wav") EndIf Case "ComboBox", "ComboBoxEx32", "MSOBALLOONREComboBox20W", "REComboBox20W", "ThunderComboBox", "ThunderDriveListBox", "ThunderRT6ComboBox", "TORComboEdit", "TCombobox", "TComboBoxEx", "TORComboBox", "TColorBox", "TNFComboBox", "Internet Explorer_TridentCmbobx", "ComboWndClass", "_AOL_ComboBox", "ThunderRT5ComboBox", "ComboLBox" SoundPlay(@ScriptDir & "\focus_Audio\list.wav") Case "Edit", "SearchBox", "TChatRichEdit", "_WwN", "_WwO", "RichEdit20A", "RichEdit20WPT", "RICHEDIT60W", "OKttbx", "RichEditA", "ThunderTextBox", "ThunderRT6TextBox", "ThunderRT5TextBox", "TEdit", "TRichEdit", "TRichEditViewer", "TMemo", "TInplaceEditList", "TLabeledEdit", "TMaskEdit", "TDateTimePicker", "TRichEdit", "TCaptionMemo", "TAddictRichEdit", "TCaptionEdit", "RichTextWndClass", "TextWndClass", "PasswordWndClass", "TextAreaWndClass", "MSWorksDoc", "_AOL_Edit", "SysDateTimePick32" SoundPlay(@ScriptDir & "\focus_Audio\edit.wav") Case "ListBox", "ComboLBox", "REListBox20W", "SUPERGRID", "OUTEXVLB", "WMSUIVLB", "SchdmapiVLB", "VLBClass", "ThunderDirListBox", "ThunderFileListBox", "ThunderListBox", "ThunderRT6ListBox", "ThunderRT5ListBox", "TListbox", "TValueListEditor", "TORCalendar", "TColorListBox", "TCheckListBox", "Internet Explorer_TridentLstBox", "ListBoxWndClass", "ListWndClass", "hh_kwd_vlist", "afx:8:376:0:946", "_AOL_ListBox", "_AOL_Tree", "" SoundPlay(@ScriptDir & "\focus_Audio\List.wav") Case "SysListView32", "OpenListView", "wuDuiListView", "ListView20WndClass", "TcxGridSite", "TListView", "TSystemListView", "ListViewWndClass", "" SoundPlay(@ScriptDir & "\focus_Audio\ListView.wav") Case "SysTreeView32", "SearchTreeList", "FeatureTree", "TreeView20WndClass", "TSystemTreeView", "TTreeView", "" SoundPlay(@ScriptDir & "\focus_Audio\TreeView.wav") Case Else SoundPlay(@ScriptDir & "\focus_Audio\focus.wav") EndSwitch EndIf $h_CurrentHWNDFocus = $h_NewHWNDFocus $h_CurrentControlHWNDFocus = $h_NewControlHWNDFocus AdlibRegister("WindowAudioFocus", 50) Return 1 EndFunc ;==>WindowAudioFocus Func _IsCheckBox($ctrl_hwnd) $Style = _WinAPI_GetWindowLong($ctrl_hwnd, $GWL_STYLE) Return BitAND($Style, $BS_CHECKBOX) = $BS_CHECKBOX EndFunc ;==>_IsCheckBox Func _IsRadio($ctrl_hwnd) $Style = _WinAPI_GetWindowLong($ctrl_hwnd, $GWL_STYLE) Return BitAND($Style, $BS_AUTORADIOBUTTON) = $BS_AUTORADIOBUTTON EndFunc ;==>_IsRadio
what i need from you is :
play a sound when a menu item focus, that sound named menu.wav
play a sound named items.wav when the users move on list box items or list view or treeview items or a combobox items
please if can any one help me i'll very happy
thanks on advance
-
By CarlD
Update: Download the latest version here.
As my first stab at GUI scripting, I'm trying to write a simple graphical interface for Grep for Windows. I have a basic GUI, but I'm stuck on one point and nothing I've tried so far works. The sticking point is that while the Tab key works to move focus from one input control to the next, clicking the mouse on any but the first input does nothing. This seems like a basic feature of GUI functionality that should work out of the box (like Tab), but clearly I'm missing something. I tried (among many other things) Melba23's technique in the post below, but this doesn't do what I'm after -- getting the left click to set the insertion point for user input. Would greatly appreciate a pointer or two. 😉
Here's my code so far:
; Grep for Windows -- GUI [CLD] #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WinAPI.au3> #include <WindowsConstants.au3> Opt("WinTitleMatchMode", -2) #cs FileInstall("X:\nix\search1.ico", @TempDir & "\search1.ico") FileInstall("X:\nix\grep.exe", @TempDir & "\grep.exe") FileInstall("X:\nix\sed.exe", @TempDir & "\sed.exe") FileInstall("X:\nix\libiconv2.dll", @TempDir & "\libiconv2.dll") FileInstall("X:\nix\libintl3.dll", @TempDir & "\libintl3.dll") FileInstall("X:\nix\pcre3.dll", @TempDir & "\pcre3.dll") FileInstall("X:\nix\regex2.dll", @TempDir & "\regex2.dll") #ce ; $sDefFs = @ScriptDir & "\.txt" $sOut = "" $iX = 20 $iY = 20 $hgGGrep = GUICreate("Grep for Windows: Simple TeXT search", 600, 600) GUISetState(@SW_SHOW, $hgGGrep) ; Obtain value of control: GUICtrlRead() ; left, top, width, height ; $iX, $iY, $iX + n, $iY + m ; $hgIco = GUICtrlCreateIcon(@ScriptDir & "\search1.ico", $iX, $iY, 10) $hgGL0 = GUICtrlCreateLabel("Enter a string or regular expression" & @CRLF & "(space between words means ""OR"")", $iX + 50, $iY, 250, 30) $hgSch = GUICtrlCreateInput("", $iX + 50, $iY + 40, 325, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgXyZ = GUICtrlCreateCheckbox("cAsE-sEnSiTiVe", $iX + 50, $iY + 65, -1, -1) $hgExe = GUICtrlCreateButton("Search", 400, $iY + 40, -1, -1) $hgFL1 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 100, 250, 20) $hgFs1 = GUICtrlCreateInput("d:\path\*.txt", $iX + 110, $iY + 100, 250, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgFL2 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 120, 250, 20) $hgFs2 = GUICtrlCreateInput("", $iX + 110, $iY + 120, 250, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgFL3 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 140, 250, 20) $hgFs3 = GUICtrlCreateInput("", $iX + 110, $iY + 140, 250, 20, $GUI_SS_DEFAULT_INPUT,-1) $hgOut = GUICtrlCreateEdit($sOut, 25, 190, 550, 400, $ES_LEFT, -1) GUICtrlSetState($hgSch, $GUI_FOCUS) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd ; #cs _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgSch)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs1)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs2)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs3)) #ce Thanks in advance.
-
By Elizabeth
Buttons on GUI to perform different tasks. SETUP is a task that involves displaying another GUI, doing calculations, writing lines to 2 external files, displaying information on GUI labels. The info from the displayed GUI (quantity made and job completed YES or NO) must be included on the written lines. I cannot get the script to run synchronously (waterfall execution 1st one ends before 2nd one starts.) That means lines written to the files do not contain the required data. I have read through FORUM and thought by inserting a boolean value and changing TRUE FALSE that I could solve this issue. I would have to set/reset the boolean before every function call to make it work. I've tried using Sleep but that just slows everything down and makes main GUI look unresponsive
Is there a trick or tip someone can provide that forces synchronous execution?
I am using OPT GUIOnEventMode
Thank you for any insight into this issue.
-
By TheDcoder
Hello everyone,
I encountered this strange issue while working on a freelance project, I cannot give you the webpage/website on which this is happening because it is an internal site which is inaccessible externally. I am attempting to create a GUI with an IE control embedded in it, but when I navigate to the desired address, it shows a blank white page.
The webpage does load if I use a different browser or normal (non-embedded) IE instance.
I managed to get my hands on the source of the blank page:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <link rel="stylesheet" type="text/css" href="res://ieframe.dll/ErrorPageTemplate.css" /> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title>Navigationen blev annulleret</title> <script src="res://ieframe.dll/errorPageStrings.js" language="javascript" type="text/javascript"> </script> <script src="res://ieframe.dll/httpErrorPagesScripts.js" language="javascript" type="text/javascript"> </script> </head> <body onLoad="javascript:navCancelInit(); "> <table width="730" cellpadding="0" cellspacing="0" border="0"> <!-- Error title --> <tr> <td id="infoIconAlign" width="60" align="left" valign="top" rowspan="2"> <img src="res://ieframe.dll/info_48.png" id="infoIcon" alt="Oplysningsikon"> </td> <td id="mainTitleAlign" valign="middle" align="left" width="*"> <h1 id="mainTitle">Navigationen til websiden blev annulleret</h1> </td> </tr> <tr> <!-- This row is for HTTP status code, as well as the divider--> <td id="errorCodeAlign" class="errorCodeAndDivider" align="right"> <div class="divider"></div> </td> </tr> <!-- Error Body --> <!-- What you can do --> <tr> <td> </td> <td id="whatToTryAlign" valign="top" align="left"> <h2 id="whatToTry">Prøv at:</h2> </td> </tr> <!-- refresh page --> <tr> <td > </td> <td id="refreshPageAlign" align="left" valign="middle"> <h4> <table> <tr> <td valign="top"> <img src="res://ieframe.dll/bullet.png" border="0" alt="" class="actionIcon"> </td> <td valign="top"> <span id="navCancelContainer"></span><noscript id="refreshPage">Opdatere siden.</noscript> </td> </tr> </table> </h4> </td> </tr> </table> </body> </html> The ieframe.dll resources are a point of interest. I am not sure how the server is able to detect the embedded instance of IE ...
Any suggestions? Here is a basic outline of the script:
#include <IE.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> Main() While True Sleep(1000) WEnd Func Main() ; Create GUI $hGUI = GUICreate("", $GUI_WIDTH, $GUI_HEIGHT, $iLeft, $iTop, $WS_POPUP) $oIE = _IECreateEmbedded() ;$oIE = _IECreate() ; This works, but it is not embedded in the GUI GUICtrlCreateObj($oIE, 0, 0, $GUI_WIDTH, $GUI_HEIGHT) GUISetState() ; Navigate to the URL and authenticate _IENavigate($oIE, $URL) EndFunc Thank you for the advice in advance!
-
