Jump to content

Recommended Posts

Trying to figure out how to do CallByName on AutoIt COM objects due to the lack of being able to set properties within an Execute() statement

Several Ideas were Tried https://www.autoitscript.com/forum/topic/200129-set-object-properties-with-propertyname-and-value-taken-from-an-array/

I think this is the best; Patching the vtable of IDispatch so we can intercept a Fake function call ($obj.Au3_CallByName)

use it like this

Local $oDictionary = ObjCreate("Scripting.Dictionary") ; EXAMPLE

Au3_CallByname_Init() ; (you can optionally provide a classname here but we patch the main Idispatch interface so really no need)
$Au3_CallByName = "Add" ; Method we want to call
$oDictionary.Au3_CallByName("Test", "Value")

Au3_CallByname_Init(False) ; (Not Strictly Needed unhooked on exit)

NOTE:  Au3_CallByname_Init() doesn't have to be called at the top of the script, just call it before you need to call by name...

Code + Example

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_AU3Check_Parameters=-d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****

;Au3CallByName, Bilgus
Global $Au3_CallByName = 0
Local $hKernel32 = DllOpen("Kernel32.dll")

Func __CallByNameCleanup()
    Au3_CallByName_Init(False) ;Unload
EndFunc   ;==>__CallByNameCleanup

; Takes a pointer to the v-table in a class and replaces specified member Id in it to a new one.
Func __HookVTableEntry($pVtable, $iVtableOffset, $pHook, ByRef $pOldRet)
    Local Const $PAGE_READWRITE = 0x04
    Local $tpVtable = DllStructCreate("ptr", $pVtable)
    Local $szPtr = DllStructGetSize($tpVtable)
    Local $pFirstEntry, $pEntry, $tEntry, $aCall, $flOldProtect, $bStatus

    ; Dereference the vtable pointer
    $pFirstEntry = DllStructGetData($tpVtable, 1)
    $pEntry = $pFirstEntry + ($iVtableOffset * $szPtr)

    ; Make the memory free for all. Yay!
    $aCall = DllCall($hKernel32, "int", "VirtualProtect", "ptr", $pEntry, "long", $szPtr, "dword", $PAGE_READWRITE, "dword*", 0)

    If @error Or Not $aCall[0] Then
        ConsoleWriteError("Error: Failed To hook vTable" & @CRLF)
        Return False
    $flOldProtect = $aCall[4]

    $tEntry = DllStructCreate("ptr", $pEntry)
    $pOldRet = DllStructGetData($tEntry, 1)
    If $pOldRet <> $pHook Then
        DllStructSetData($tEntry, 1, $pHook)
        $bStatus = True
    Else ;Already Hooked
        ConsoleWriteError("Error: vTable is already hooked" & @CRLF)
        $bStatus = False

    ;put the memory protect back how we found it
    DllCall($hKernel32, "int", "VirtualProtect", "ptr", $pEntry, "long", $szPtr, "dword", $flOldProtect, "dword*", 0)
    Return $bStatus
EndFunc   ;==>__HookVTableEntry

; Everytime autoit wants to call a method, get or set a property in a object it needs to go to
; IDispatch::GetIDsFromNames. This is our version of that function, note that by defining this ourselves
; we can fool autoit to believe that the object supports a lot of different properties/methods.
Func __IDispatch_GetIDsFromNames($pSelf, $riid, $rgszNames, $cNames, $lcid, $rgDispId)
    Local Const $CSTR_EQUAL = 0x02
    Local Const $LOCALE_SYSTEM_DEFAULT = 0x800
    Local Const $DISP_E_UNKNOWNNAME = 0x80020006
    Local Static $pGIFN = __Pointer_GetIDsFromNames()
    Local Static $tpMember = DllStructCreate("ptr")

    If $Au3_CallByName Then
        Local $hRes, $aCall, $tMember
        ;autoit only asks for one member
        $aCall = DllCall($hKernel32, 'int', 'CompareStringW', 'dword', $LOCALE_SYSTEM_DEFAULT, 'dword', 0, 'wstr', "Au3_CallByName", 'int', -1, _
                'struct*', DllStructGetData(DllStructCreate("ptr[" & $cNames & "]", $rgszNames), 1, 1), 'int', -1)

        If Not @error And $aCall[0] = $CSTR_EQUAL Then
            ;ConsoleWrite("CallByName: " & $Au3_CallByName & @CRLF)
            $tMember = DllStructCreate("wchar[" & StringLen($Au3_CallByName) + 1 & "]")
            DllStructSetData($tMember, 1, $Au3_CallByName)
            DllStructSetData($tpMember, 1, DllStructGetPtr($tMember))
            $rgszNames = $tpMember
            $Au3_CallByName = 0
    ;Call the original GetIDsFromNames
    $hRes = DllCallAddress("LRESULT", $pGIFN, "ptr", $pSelf, "ptr", $riid, _
            "struct*", $rgszNames, "dword", $cNames, "dword", $lcid, "ptr", $rgDispId)

    If @error Then
        ConsoleWrite("Error: GetIDsFromNames: " & @error & @CRLF)
        Return $DISP_E_UNKNOWNNAME
    Return $hRes[0]
EndFunc   ;==>__IDispatch_GetIDsFromNames

Func __Pointer_GetIDsFromNames($ptr = 0)
    Local Static $pOldGIFN = $ptr
    If $ptr <> 0 Then $pOldGIFN = $ptr
    Return $pOldGIFN
EndFunc   ;==>__Pointer_GetIDsFromNames

Func Au3_CallByName_Init($bHook = True, $classname = "shell.application")
    Local Const $iOffset_GetIDsFromNames = 5
    Local Static $IDispatch_GetIDsFromNames_Callback = 0
    Local $oObject, $pObject, $pHook, $pOldGIFN

    If $bHook Then
        If $IDispatch_GetIDsFromNames_Callback = 0 Then
            $IDispatch_GetIDsFromNames_Callback = DllCallbackRegister("__IDispatch_GetIDsFromNames", "LRESULT", "ptr;ptr;ptr;dword;dword;ptr")
        $pHook = DllCallbackGetPtr($IDispatch_GetIDsFromNames_Callback)
        $pHook = __Pointer_GetIDsFromNames()
        If $pHook <= 0 Then Return ;Already Unloaded

    $oObject = ObjCreate($classname)
    $pObject = DllStructSetData(DllStructCreate("ptr"), 1, $oObject)

    If __HookVTableEntry($pObject, $iOffset_GetIDsFromNames, $pHook, $pOldGIFN) Then
        __Pointer_GetIDsFromNames($pOldGIFN) ;Save the original pointer to GetIDsFromNames
        If Not $bHook Then
            $IDispatch_GetIDsFromNames_Callback = 0

    $oObject = 0
EndFunc   ;==>Au3_CallByName_Init

#include <ie.au3>
Global $oRegistrationInfo = _IECreate()

Global $aRegistrationInfo[] = ['Left=10', 'Top= 10', 'Width=450', 'Height=600']
Global $oObject = $oRegistrationInfo

Local $oDictionary = ObjCreate("Scripting.Dictionary")

Local $oDictionary2 = ObjCreate("Scripting.Dictionary")

__TS_TaskPropertiesSet($oObject, $aRegistrationInfo)

MsgBox(0, "Info", "Press OK to exit")

$oRegistrationInfo = 0
$oObject = 0

For $i = 1 To 10
    $Au3_CallByName = "Add"
    $oDictionary.Au3_CallByName("test1:" & $i, "Dictionary Item: " & $i)

$Au3_CallByName = "keys"
For $sKey In $oDictionary.Au3_CallByName()
    For $j = 0 To 1
        $Au3_CallByName = ($j = 0) ? "Item" : "Exists"
        ConsoleWrite($sKey & " -> " & $oDictionary.Au3_CallByName($sKey) & @CRLF)

Au3_CallByName_Init(False) ;Unload

Local $aRegistrationInfo[] = ['Left=1000', 'Width=450']
ConsoleWrite(@CRLF & "NEW IE" & @CRLF & @CRLF)
$oRegistrationInfo = _IECreate()

__TS_TaskPropertiesSet($oRegistrationInfo, $aRegistrationInfo)

MsgBox(0, "Info", "Press OK to exit")


For $i = 1 To 10
    $Au3_CallByName = "Add"
    $oDictionary2.Au3_CallByName("test2:" & $i, "Dictionary Item: " & $i)

$Au3_CallByName = "keys"
For $sKey In $oDictionary2.Au3_CallByName()
    For $j = 0 To 1
        $Au3_CallByName = ($j = 0) ? "Item" : "Exists"
        ConsoleWrite($sKey & " -> " & $oDictionary2.Au3_CallByName($sKey) & @CRLF)

Au3_CallByName_Init(False) ;Unload (Not Strictly Needed, Done on Script Close)

Func __TS_TaskPropertiesSet(ByRef $oObject, $aProperties)
    Local $aTemp
    If IsArray($aProperties) Then

        For $i = 0 To UBound($aProperties) - 1
            $aTemp = StringSplit($aProperties[$i], "=", 2) ; 2 -> $STR_NOCOUNT)
            If @error Then ContinueLoop

            ConsoleWrite("Command: $oObject." & $aTemp[0] & " = " & $aTemp[1] & @CRLF)
            $Au3_CallByName = $aTemp[0]
            $oObject.Au3_CallByName = $aTemp[1]
            ConsoleWrite("Result : " & Hex(@error) & @CRLF)
            ; If @error Then Return SetError(1, @error, 0)
EndFunc   ;==>__TS_TaskPropertiesSet


Edited by Bilgus

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Colduction
      Hello again, i have a code that changes username to favorite, my problem is how to use ObjEvent() function to catch errors, i've red Help File and Forum's Topics but i can't understand too much😐

      Here is a code (I've copied this codes from a user of AutoIt Forum):
      $sOldUser = "Administrator" $sNewUser = "Admin" $oUser = ObjGet("WinNT://" & @ComputerName & "/" & $sOldUser & ",user") $oComputer = ObjGet("WinNT://" & @ComputerName) $oNewUser = $oComputer.MoveHere($oUser.ADsPath, $sNewUser) Thanks for your care, I'm new to AutoIt and days should be passed with my coding and practicing to don't bother you :)❤
    • By mLipok
      Today, in the end as well, worked out using the Acrobat Reader ActiveX COM Object "AcroPDF.PDF.1"
      #include-once #include <Constants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <Misc.au3> #include <MenuConstants.au3> #include <WinAPI.au3> ;~ Thanks to BrewManNH ;~ http://www.autoitscript.com/forum/topic/134878-guiregistermsg-replacement-for-guictrlsetonevent-and-guigetmsg/ ;~ Thanks to mikell ;~ http://www.autoitscript.com/forum/topic/161985-how-to-close-gui-with-guiregistermsg/ ; Install a custom error handler Global $oMyError = ObjEvent("AutoIt.Error", "_ComErrFunc") Global $__hExampleGUI Global $__idOPEN Global $_fExit Global $__hACROBAT_GUI = '' Global $__idACROBAT_GUI_CTRL_AX = '' Global $__oACROBAT_READER = '' #include <GUIConstantsEx.au3> ;~ GUIRegisterMsg($WM_ERASEBKGND, "_WM_EXTRACTOR") ;~ GUIRegisterMsg($WM_PAINT, "_WM_EXTRACTOR") ;~ GUIRegisterMsg($WM_ACTIVATE, "_WM_EXTRACTOR") ;~ GUIRegisterMsg($WM_CAPTURECHANGED, "_WM_EXTRACTOR") ;~ GUIRegisterMsg($WM_DEVICECHANGE, "_WM_EXTRACTOR") GUIRegisterMsg($WM_EXITSIZEMOVE, "_WM_EXTRACTOR") GUIRegisterMsg($WM_COMMAND, "_WM_EXTRACTOR") GUIRegisterMsg($WM_SYSCOMMAND, "_WM_EXTRACTOR") GUIRegisterMsg($WM_HSCROLL, "_WM_EXTRACTOR") _ExampleProgram_Gui() While 1 Sleep(10) If $_fExit Then _ACROBAT_GUI_DELETE() DeleteGui() Exit EndIf WEnd Func DeleteGui() GUIDelete($__hExampleGUI) EndFunc ;==>DeleteGui Func _ExampleProgram_Gui() ; Create a GUI with various controls. $__hExampleGUI = GUICreate("Example") $__idOPEN = GUICtrlCreateButton("&Open", 310, 370, 85, 25) ; Display the GUI. GUISetState(@SW_SHOW, $__hExampleGUI) EndFunc ;==>_ExampleProgram_Gui #Region ACROBAT FUNCTION Func _AcrobatInit() $__oACROBAT_READER = ObjCreate("AcroPDF.PDF.1"); Return $__oACROBAT_READER.GetVersions EndFunc ;==>_AcrobatInit Func _Acrobat_Events(ByRef $aMSG) If $aMSG[1] = $__hACROBAT_GUI Then Switch $aMSG[0] Case $GUI_EVENT_CLOSE _ACROBAT_GUI_DELETE() EndSwitch EndIf EndFunc ;==>_Acrobat_Events Func _ACROBAT_Destroy() $__oACROBAT_READER = "" ;~ MsgBox(1,'test','destroyed') EndFunc ;==>_ACROBAT_Destroy Func _AcrobatShow($sFile, $sTitle = "PDF ", $iLeft = 50, $iTop = 0, $iWidth = 1000, $iHeight = 700) If FileExists($sFile) Then _AcrobatInit() ; Set option $__oACROBAT_READER.src = $sFile $__oACROBAT_READER.SetLayoutMode(4) $__oACROBAT_READER.SetPageMode(1) $__oACROBAT_READER.SetShowToolbar(0) $__oACROBAT_READER.SetView(1) ; Create GUI $__hACROBAT_GUI = GUICreate($sTitle, $iWidth, $iHeight, $iLeft, $iTop, BitOR($GUI_SS_DEFAULT_GUI, $WS_SIZEBOX, $WS_MAXIMIZEBOX)) $__idACROBAT_GUI_CTRL_AX = GUICtrlCreateObj($__oACROBAT_READER, 5, 5, $iWidth - 20, $iHeight - 10) GUICtrlSetStyle($__idACROBAT_GUI_CTRL_AX, $WS_VISIBLE) GUISetState() EndIf EndFunc ;==>_AcrobatShow Func _ACROBAT_Refresh() If IsObj($__oACROBAT_READER) Then Local $hPreviouslyGui = GUISwitch($__hACROBAT_GUI) GUISetState(@SW_LOCK) Local $iGUI_PDFWidth = WinGetPos($__hACROBAT_GUI)[2] - 20 Local $iGUI_PDFHeight = WinGetPos($__hACROBAT_GUI)[3] - 40 Local $sFile = $__oACROBAT_READER.src ; this below line do not works with Acro Reader ; Local $iCurrentPage = $__oACROBAT_READER.GetNumber Local $iCurrentPage = 0 _ACROBAT_Destroy() GUICtrlDelete($__idACROBAT_GUI_CTRL_AX) _AcrobatInit() $__idACROBAT_GUI_CTRL_AX = GUICtrlCreateObj($__oACROBAT_READER, 5, 5, $iGUI_PDFWidth, $iGUI_PDFHeight) $__oACROBAT_READER.src = $sFile ;~ $__oACROBAT_READER.SetCurrentPage($iCurrentPage) GUISetState(@SW_UNLOCK) GUISwitch($hPreviouslyGui) EndIf EndFunc ;==>_ACROBAT_Refresh Func _ACROBAT_GUI_DELETE() _ACROBAT_Destroy() if IsHWnd($__hACROBAT_GUI) then GUIDelete($__hACROBAT_GUI) EndFunc ;==>_ACROBAT_GUI_DELETE #EndRegion ACROBAT FUNCTION #Region MSG and ERROR HANDLER Func _WM_EXTRACTOR($hWnd, $iMsg, $wParam, $lParam) ;~ ConsoleWrite('! $hWnd = ' & $hWnd & ' $iMsg = ' & $iMsg & '('&HEX($iMsg)&')'& ' $wParam = ' & $wParam & ' $lParam = ' & $lParam & @CRLF) If $hWnd = ControlGetHandle($__hACROBAT_GUI, '', $__idACROBAT_GUI_CTRL_AX) Then ConsoleWrite('! -------------- $hWnd = ' & $hWnd & ' $iMsg = ' & $iMsg & '(' & Hex($iMsg) & ')' & ' $wParam = ' & $wParam & ' $lParam = ' & $lParam & @CRLF) EndIf If $hWnd = $__hACROBAT_GUI Then Switch $iMsg Case $WM_COMMAND #cs Case $WM_ACTIVATE Local $test = BitAND($wParam, 0x00000004) if $test <> 0 then MsgBox(1,'$WM_ACTIVATE','test') _ACROBAT_Refresh() EndIf Case $WM_ERASEBKGND WinGetHandle("[ACTIVE]") if $__hACROBAT_GUI <> _WinAPI_GetWindow ( $__hACROBAT_GUI, $GW_HWNDPREV ) then ConsoleWrite('! Case $WM_ERASEBKGND' & @CRLF) _ACROBAT_Refresh() _WinAPI_RedrawWindow($__hACROBAT_GUI,0,0,$RDW_NOERASE) EndIf Case $WM_PAINT _WinAPI_RedrawWindow($__hACROBAT_GUI,0,0,$RDW_NOERASE) Case $WM_CAPTURECHANGED _ACROBAT_Refresh() Case $WM_DEVICECHANGE _ACROBAT_Refresh() #ce Case $WM_EXITSIZEMOVE _ACROBAT_Refresh() Case $WM_SYSCOMMAND ;~ Local $test = BitAND($wParam, 0xFFF0) Local $test = BitAND($wParam, 0x0000FFFF) Switch $test Case $SC_CLOSE _ACROBAT_GUI_DELETE() Case $SC_CONTEXTHELP Case $SC_DEFAULT Case $SC_HOTKEY Case $SC_HSCROLL Case $SC_KEYMENU Case $SC_MAXIMIZE _ACROBAT_Refresh() Case $SC_MINIMIZE Case $SC_MONITORPOWER Case $SC_MOUSEMENU Case $SC_MOVE ;~ _ACROBAT_Refresh() Case $SC_NEXTWINDOW ;~ _ACROBAT_Refresh() Case $SC_PREVWINDOW ;~ _ACROBAT_Refresh() Case $SC_RESTORE _ACROBAT_Refresh() Case $SC_SCREENSAVE Case $SC_SIZE Case $SC_TASKLIST Case $SC_VSCROLL EndSwitch EndSwitch EndIf If $hWnd = $__hExampleGUI Then Switch $iMsg Case $WM_COMMAND Local $nID = BitAND($wParam, 0x0000FFFF) Local $hCtrl = $lParam Switch $nID Case $__idOPEN if not IsObj($__oACROBAT_READER) then _AcrobatShow(FileOpenDialog("Choose PDF", "C:\Temp", "PDF Files(*.pdf)", 3)) ; put your own start folder here) EndIf EndSwitch Case $WM_SYSCOMMAND Local $test = BitAND($wParam, 0xFFF0) Switch $test Case $SC_CLOSE $_fExit = True Case $SC_CONTEXTHELP Case $SC_DEFAULT Case $SC_HOTKEY Case $SC_HSCROLL Case $SC_KEYMENU Case $SC_MAXIMIZE Case $SC_MINIMIZE Case $SC_MONITORPOWER Case $SC_MOUSEMENU Case $SC_MOVE Case $SC_NEXTWINDOW Case $SC_PREVWINDOW Case $SC_RESTORE Case $SC_SCREENSAVE Case $SC_SIZE Case $SC_TASKLIST Case $SC_VSCROLL EndSwitch EndSwitch EndIf Return $GUI_RUNDEFMSG EndFunc ;==>_WM_EXTRACTOR Func _ComErrFunc() Local $HexNumber = Hex($oMyError.number, 8) MsgBox(0, "AutoItCOM Test", _ "We intercepted a COM Error !" & @CRLF & @CRLF & _ "err.description is: " & @TAB & $oMyError.description & @CRLF & _ "err.windescription:" & @TAB & $oMyError.windescription & @CRLF & _ "err.number is: " & @TAB & $HexNumber & @CRLF & _ "err.lastdllerror is: " & @TAB & $oMyError.lastdllerror & @CRLF & _ "err.scriptline is: " & @TAB & $oMyError.scriptline & @CRLF & _ "err.source is: " & @TAB & $oMyError.source & @CRLF & _ "err.helpfile is: " & @TAB & $oMyError.helpfile & @CRLF & _ "err.helpcontext is: " & @TAB & $oMyError.helpcontext _ ) SetError(1) EndFunc ;==>_ComErrFunc #EndRegion MSG and ERROR HANDLER Any comments are welcome.
    • By jantograaf
      Hi all,
      I'm trying to write a script that connects with a VBA/COM API to get the status of a connected phone. I've been looking up and down this forum for tips or other user's experiences, but I can't seem to find anything (even remotely) similar. It shouldn't be so hard to do, however.
      Software I'm trying to connect to
      I'm trying to integrate CallCenter by using their API, which is documented over here : JustRemotePhone API Reference
      Things I've tried
      I've tried using ObjCreate but I don't get any result, it always returns the same (negative) error.
      #Version 1 tried ObjCreate("JustRemotePhone.RemotePhoneService") #Version 2 tried ObjCreate("JustRemotePhoneCOM.RemotePhoneService") #Version 3 tried ObjCreate("JustRemotePhoneCOM.RemotePhoneService.Application") None of the three versions I tried seem to deliver any result other than a negative error value which basically says that the given class is not valid.
      I am starting to get the hang of AutoIt by now, but unmanaged programming languages and object-oriented stuff is still quite a grey zone for me. If anyone could help me 'talk' to this application, I'd be immensely grateful!
      Thanks in advance and kind regards from Belgium!
    • By Rhidlor
      So I'm trying to do some as400 automation and hit a wall when trying to get a COM object. The code on line 8 is failing, the as400.ws file opens with PCSWS.exe so I tried using that as the file path too but that didn't work either. Any and all help is greatly appreciated! 
      $file = "C:\Users\Rhidlor\Desktop\as400.ws" If Not FileExists($file) Then MsgBox(0, "Error", "Error finding file") Exit EndIf $object = ObjGet($file) If @error Then MsgBox(0, "Error", "Error getting object") Exit EndIf $object.SendKeys("05")  
    • By Bilgus
      ; NetFirewallPolicy2 COM UDF Library for AutoIt3
      ; AutoIt Version :
      ; Description ...: Windows Firewall Policy2 Interface, Provides access to the firewall policy for Windows Vista+
      Including Test Script 
      _NetFw_Get_CurrentProfileTypes                           Retrieves the currently active firewall profile(s) _NetFw_Get_FirewallEnabled                               Indicates whether a firewall is enabled locally _NetFw_Put_FirewallEnabled                               Specifies whether a firewall is enabled locally _NetFw_Get_ExcludedInterfaces                            Indicates a list of interfaces on which firewall settings are excluded _NetFw_Put_ExcludedInterfaces                            Specifies a list of interfaces on which firewall settings are excluded _NetFw_Get_BlockAllInboundTraffic                        Indicates whether the firewall should not allow inbound traffic _NetFw_Put_BlockAllInboundTraffic                        Specifies whether the firewall should not allow inbound traffic _NetFw_Get_NotificationsDisabled                         Indicates whether interactive firewall notifications are disabled _NetFw_Put_NotificationsDisabled                         Specifies whether interactive firewall notifications are disabled _NetFw_Get_UnicastResponsesToMulticastBroadcastDisabled  Indicates whether the firewall should not allow unicast responses to multicast and broadcast traffic _NetFw_Put_UnicastResponsesToMulticastBroadcastDisabled  Specifies whether the firewall should not allow unicast responses to multicast and broadcast traffic _NetFw_Get_Rules                                         Retrieves the interface to collection of firewall rules _NetFw_Get_ServiceRestriction                            Retrieves the interface used to access the Windows Service Hardening store _NetFw_EnableRuleGroup                                   Enables or disables a specified group of firewall rules _NetFw_IsRuleGroupEnabled                                Determines whether a specified group of firewall rules are enabled or disabled for the current profile _NetFw_RestoreLocalFirewallDefaults                      Restores the local firewall configuration to its default state _NetFw_Get_DefaultInboundAction                          Indicates the default action for inbound traffic _NetFw_Put_DefaultInboundAction                          Specifies the default action for inbound traffic _NetFw_Get_DefaultOutboundAction                         Indicates the default action for outbound traffic _NetFw_Put_DefaultOutboundAction                         Specifies the default action for outbound traffic _NetFw_Get_IsRuleGroupCurrentlyEnabled                   Determines whether a specified group of firewall rules are enabled or disabled for the current profile _NetFw_Get_LocalPolicyModifyState                        Determines if adding or setting a rule or group of rules will take effect in the current firewall profile  
      Test Script:
  • Create New...