Jump to content
Sign in to follow this  
antonioj84

Powershell and autoit command line - (Moved)

Recommended Posts

I need some help with the powershell code below

#include <AutoItConstants.au3>
#include <Array.au3>
#RequireAdmin

$PS='Get-NetConnectionProfile | Where-Object { $_.NetworkCategory -match "$Public" } | Set-NetConnectionProfile -NetworkCategory Private'

$sCommands = "powershell -Command " & $PS &""
$iPID = Run(@ComSpec & " /k " & $sCommands, "", @SW_SHOW , $stdout_child)

 

Share this post


Link to post
Share on other sites

Moved to the appropriate forum.

Moderation Team


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

im assuming that when you run...

Get-NetConnectionProfile | Where-Object { $_.NetworkCategory -match "$Public" } | Set-NetConnectionProfile -NetworkCategory Private

directly into PS it performs correctly, so you probably dont need help with your powershell code.

 

put some message boxes in between each line with new variables.

so if you msgbox $sCommands does it show $PS mixing in with the proper syntax?

since you are doing stdout then msgbox $iPID to see what is getting returned.


If @error Then
    MsgBox(262192, "", @ComputerName & " slaps " & @UserName & " around a bit with a large trout!")
    EndIf

"Yeah yeah patience, how long will that take?"  -Ed Gruberman

REAL search results

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DannyJ
      $sCommands1 = 'powershell.exe Get-ChildItem' $iPid = run($sCommands1   , @WorkingDir , @SW_SHOW , 0x2) $sOutput = ""  While 1     $sOutput &= StdoutRead($iPID)         If @error Then             ExitLoop         EndIf  WEnd ;~ msgbox(0, '' , $sOutput) ConsoleWrite("$sOutput") ConsoleWrite($sOutput) ConsoleWrite(@CRLF) $aOutput = stringsplit($sOutput ,@LF , 2) For $i=0 To  UBound($aOutput) - 1 Step 1     ConsoleWrite($aOutput[$i]) Next The script above reads the whole directory into a one dimensional array, but I need to work with the array, so I need to split the array into multiple dimensions.
      I have already read some forum answers here, and I have already tried these commands:
       
      Are there any way to use the $aOutput variable like in PowerShell:
      PowerShell:
      $a = Get-ChildItem $a.Mode I imagine this in AutoIt  $aOutput
      ConsoleWrite($aOutput[i].Mode) Or if I split this command into 2 dimension like:
      For $i To UBound($aOutput)-1 Step 1 ConsoleWrite($aOutput[$i][1]) ConsoleWrite($aOutput[$i][2]) Next  
    • By DannyJ
      If I try to run this script with   Get-ChildItem which means dir this script works perfectly, but If I try to run this command Get-RDUserSession, my script has the following error message:
      This command runs perfectly in PowerShell admin and I get back the values
      Get-RDUserSession -ConnectionBroker  broker.local | sort Username Or you can try this command as well
      Get-Command Get-RDUserSession If I run the above mentioned command this runs perfectly in PowerShell but not with AutoIt.
      Here is my script you can test the commands:
      #include<array.au3> $iPid = run('powershell Get-Command Get-RDUserSession'  , @WindowsDir , @SW_HIDE , 0x2) ;; This command not works in AutoIT you can test it in PowerShell but it won't work in Autoit ;$iPid = run('powershell Get-RDUserSession -ConnectionBroker  broker.local | sort Username'  , @WindowsDir , @SW_MAXIMIZE , 0x2) ; This command not works in AutoIT ;$iPid = run('powershell Get-ChildItem | sort Name'  , @WindowsDir , @SW_HIDE , 0x2) ; This runs perfectly $sOutput = ""  While 1     $sOutput &= StdoutRead($iPID)         If @error Then             ExitLoop         EndIf  WEnd ;~ msgbox(0, '' , $sOutput) $aOutput = stringsplit($sOutput , @LF , 2) _ArrayDisplay($aOutput)  
      That could be the solution of the problem if I could run, directly this PowerShell command window and Write to it and save it's values.
    • By DrLarch
      I'm trying to run this powershell command from Autoit and can't figure out how to pull it off:
      Get-ProvisionedAppxPackage -Online | Where-Object { $_.PackageName -match "xbox" } | ForEach-Object { Remove-ProvisionedAppxPackage -Online -AllUsers -PackageName $_.PackageName } I've been trying to run it many different ways including:
      $sCMD = 'Get-ProvisionedAppxPackage -Online | Where-Object { $_.PackageName -match "xbox" } | ForEach-Object { Remove-ProvisionedAppxPackage -Online -AllUsers -PackageName $_.PackageName }' RunWait(@comspec & ' /c powershell.exe -nologo -executionpolicy bypass -noprofile -Command "&' & $sCMD & '"') The problem is that it seems I'm missing something in how to escape or double the quotes. I've tried doubling the quotes in many different ways, but the end result always produces a syntax error in powershell. I could just run powershell first, then paste and run the command, then close the powershell window, but that's clunky. I'm trying to do it either via parameter (as above) or in one line like this:
      RunWait(@comspec & ' /c powershell.exe -nologo -executionpolicy bypass -noprofile -Command "&Get-ProvisionedAppxPackage -Online | Where-Object { $_.PackageName -match "xbox" } | ForEach-Object { Remove-ProvisionedAppxPackage -Online -AllUsers -PackageName $_.PackageName }"')  
    • By antonioj84
      any assistance how to incorporate this powershell command within autoit
       
      powershell.exe -nologo -executionpolicy bypass -WindowStyle hidden -noprofile -command "&Set-WinUserLanguageList -LanguageList fr-CA, en-CA -Force"
    • By Exit
      For my next project I would like to send files with "alternate data streams" by email in ZIP format.
      I can not use any external program like 7-Zip or WinRAR. (They would fit😥)
      Who knows how to create a ZIP file with "alternate data streams" included with the Powershell command "Compress-Archive"? 
      Here a test script:  (save as "ADSTester.cmd")
      @rem Try to create a zip file with alternate data streams (ADS) included @rem Housekeeping @cls @del ADSTester.zip >nul: @RD /S /Q Extracted >nul: @del ADSTester.txt >nul: @rem End of Housekeeping echo This is the ADSTester.txt file >ADSTester.txt echo This is the ADSTester.txt:Part1 file >ADSTester.txt:Part1 echo This is the ADSTester.txt:Part2 file >ADSTester.txt:Part2 dir /r ADSTester.txt @rem See the 3 files @rem **************************************************************** @rem **************************************************************** @rem Please alter the next lines to include the alternate data streams. powershell Compress-Archive -Path .\ADSTester.txt -Update -DestinationPath ADSTester.zip powershell Expand-Archive -Path ADSTester.zip -DestinationPath .\Extracted\ dir /r Extracted\ADSTester.txt @rem Only one file left :-( pause  
×
×
  • Create New...