Jump to content

Recommended Posts

Why can I not click on either of my input fields?

#Region ### START Koda GUI section ### Form=
    Global $Form1 = GUICreate("Form1", 730, 437, 192, 124)
    ;GUISetFont(14, 800, 0, "MS Sans Serif")
    GUISetBkColor(0xC0DCC0)
    Global $Label1 = GUICtrlCreateLabel("Enter your Password. UserName is auto filled", 62, 40, 604, 41, $SS_CENTER)
    GUICtrlSetFont(-1, 26, 800, 0, "MS Sans Serif")

    Global $Label2 = GUICtrlCreateLabel("User Name:", 120, 130, 604, 31, $SS_LEFT)
    GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif")
    Global $Label3 = GUICtrlCreateLabel("Password:", 135, 210, 604, 31, $SS_LEFT)
    GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif")

    Global $Input1 = GUICtrlCreateInput(@UserName, 274, 130, 185, 32)
    GUICtrlSetFont(-1, 14, 800, 1, "MS Sans Serif")
    Global $Input2 = GUICtrlCreateInput("Password", 274, 210, 185, 32, $ES_PASSWORD)
    GUICtrlSetFont(-1, 14, 800, 0, "MS Sans Serif")
    
    Global $OK     = GUICtrlCreateButton("OK", 274, 270, 185, 57)
    GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif")
    GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
    
    While 1
        $nMsg = GUIGetMsg()
        Switch $nMsg
            Case $GUI_EVENT_CLOSE
                Exit

            Case $OK
                Global $UserName = GUICtrlRead($Input1)
                Global $PassWord = GUICtrlRead($Input2)
                ExitLoop
        EndSwitch
    WEnd

    ; Delete the GUI window
    GUIDelete()

 

Edited by nooneclose
Link to post
Share on other sites
  • Developers

Your label is much to long and overlapping the input field!
The 640 should be around 135.

Edited by Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to post
Share on other sites
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <EditConstants.au3>

Global $UserName = @UserName, $PassWord = "Password"

; Scaling :
Global $g_fDPIBase     = 0.96, $g_fDPI = 1 ; scale factor
Global $g_iAppliedDPI = RegRead("HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics", "AppliedDPI")
If Not @error Then
    $g_fDPIBase = $g_iAppliedDPI/100
    $g_fDPI     = Round($g_fDPIBase/$g_iAppliedDPI*100, 2)
EndIf

#Region ### START Koda GUI section ### Form=
Global $Form1 = GUICreate("Form1", 730, 437, 192, 124)
;GUISetFont(14 * $g_fDPI, 800, 0, "MS Sans Serif")
GUISetBkColor(0xC0DCC0)
Global $Label1 = GUICtrlCreateLabel("Enter your Password. UserName is auto filled", 62, 40, 604, 41, $SS_CENTER)
GUICtrlSetFont(-1, 16 * $g_fDPI, 800, 0, "MS Sans Serif")

Global $Label2 = GUICtrlCreateLabel("Username:", 120, 130, 170, 31, $SS_LEFT)
GUICtrlSetFont(-1, 20 * $g_fDPI, 800, 0, "MS Sans Serif")
Global $Label3 = GUICtrlCreateLabel("Password:", 120, 210, 170, 31, $SS_LEFT)
GUICtrlSetFont(-1, 20 * $g_fDPI, 800, 0, "MS Sans Serif")

Global $Input1 = GUICtrlCreateInput($UserName, 300, 130, 185, 32)
GUICtrlSetFont(-1, 14 * $g_fDPI, 800, 1, "MS Sans Serif")
Global $Input2 = GUICtrlCreateInput($PassWord, 300, 210, 185, 32, $ES_PASSWORD)
GUICtrlSetFont(-1, 14 * $g_fDPI, 800, 0, "MS Sans Serif")

Global $OK = GUICtrlCreateButton("OK", 274, 270, 185, 57)
GUICtrlSetFont(-1, 20 * $g_fDPI, 800, 0, "MS Sans Serif")
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While True
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

        Case $OK
            $UserName = GUICtrlRead($Input1)
            $PassWord = GUICtrlRead($Input2)
            MsgBox(0, "Values", "Username = " & $UserName & @CRLF & "Password = " & $PassWord)
            ExitLoop

    EndSwitch
WEnd

; Delete the GUI window
GUIDelete()

 

Edited by Musashi

Musashi-C64.png

"In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move."

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By XGamerGuide
      I'm trying to assign a faint text in the background to an input field that disappears after the input has started. This should have a certain color such as gray.
    • By DJ143
      I have a autoit exe file which is used in upload/browse file functionality.  This has been integrated with selenium framework and I am invoking the autoit exe using Java process and runtime. 
      Now the issue is when I run the scripts and invoke the autoit exe in local it works perfectly.  But when I use selenium grid or jenkins to run the scripts in another windows server it is not working.
      Can anyone please suggest any solution for this?
    • By Bruceway
      Hi All, 
      I am trying to mark out the middle square of this Magnify Routine "window on right" (stolen from M23 - Thanks) - I assume the DllCall is overwriting the boxes. But wherever I try and redraw, they won't stay on the Magnify Window. Can anyone advise, bet way to keep boxes around the middle square.
      Please be kind with my code, it is ripped from a MUCH bigger exe.
      The "half" transparent window, is for dragging to where you want it, and the buttons are for more precise placement.
      #include <WindowsConstants.au3> #include <StaticConstants.au3> #include <GUIConstantsEx.au3> #include <WinAPI.au3> Global $hMag_GUI, $hMagDC, $hDeskDC, $hPen, $oObj, $aWinPos[2], $iLast_Mouse_X = 0, $iLast_Mouse_Y = 0 Global $pWindowCaptureX, $pWindowCaptureY Global $pWindowMagWinX, $pWindowMagWinY #Region - GUI3 ; *** Grabber/Picker Window Global $hGUI3 = GUICreate("Capture", 150, 150, $pWindowCaptureX, $pWindowCaptureY, $WS_EX_TOOLWINDOW) Global $Pic1 = GUICtrlCreatePic("", 70, 40, 10, 10, BitOR($GUI_SS_DEFAULT_PIC,$WS_BORDER)) Global $hButtonUp = GUICtrlCreateButton("U", 65, 60, 20, 20) Global $hButtonDown = GUICtrlCreateButton("D", 65, 100, 20, 20) Global $hButtonLeft = GUICtrlCreateButton("L", 40, 80, 20, 20) Global $hButtonRight = GUICtrlCreateButton("R", 90, 80, 20, 20) Global $hButtonOK = GUICtrlCreateButton("OK", 60, 80, 30, 20) #EndRegion - GUI3 #Region - GUI4 Global $hGUI4 = GUICreate("MagWin", 250, 250, 325, 195) Global $hButtonMOK = GUICtrlCreateButton("OK", 45, 140, 30, 20) Global $hButtonMUp = GUICtrlCreateButton("U", 50, 120, 20, 20) Global $hButtonMDown = GUICtrlCreateButton("D", 50, 160, 20, 20) Global $hButtonMLeft = GUICtrlCreateButton("L", 25, 140, 20, 20) Global $hButtonMRight = GUICtrlCreateButton("R", 75, 140, 20, 20) Global $hLabelWindow = GUICtrlCreateLabel("Window", 5, 185, 44, 15) Global $hLabelWindowText = GUICtrlCreateLabel("", 60, 185, 176, 15) Global $hLabelCheck = GUICtrlCreateLabel("Check", 5, 205, 44, 15) Global $hLabelCheckText = GUICtrlCreateLabel("", 60, 205, 176, 15) Global $hLabelScreen = GUICtrlCreateLabel("Screen", 5, 225, 44, 15) Global $hLabelScreenText = GUICtrlCreateLabel("", 60, 225, 176, 15) #EndRegion - GUI4 ;GUISetState(@SW_HIDE, $hGUI1) GUISetState(@SW_SHOW, $hGUI3) GUISetState(@SW_SHOW, $hGUI4) WinSetTrans($hGUI3, "", 100) $hMag_GUI = WinGetHandle("MagWin") ; Get device context for Mag GUI $hMagDC = _WinAPI_GetDC($hMag_GUI) If @error Then Exit ; Get device context for desktop $hDeskDC = _WinAPI_GetDC(0) If @error Then _WinAPI_ReleaseDC($hMag_GUI, $hMagDC) Exit EndIf ; Create pen $hPen = _WinAPI_CreatePen($PS_SOLID, 5, 0x7E7E7E) $oObj = _WinAPI_SelectObject($hMagDC, $hPen) ; Loop until the user exits. ; *** Static Window While 1 ; Reset position Local $aWinPos = WinGetPos("Capture") If $aWinPos[0] <> $iLast_Mouse_X Or $aWinPos[1] <> $iLast_Mouse_Y Then ; Redraw Mag GUI _FOEA_Loupe($aWinPos) ;~ Local $TWPx = $aWinPos[0]+81 ;+81 Top Left Corner; +85 Middle ;~ Local $TWPy = $aWinPos[1]+75 ;+75 Top Left Corner; +80 Middle ;~ ;*** WINDOW COORDS = x+81 & y+75 (top left of picker square) GUISetState(@SW_HIDE, $hGUI3) Local $output1 = PixelCheckSum($aWinPos[0]+81, $aWinPos[1]+75, $aWinPos[0]+91, $aWinPos[1]+85) Local $output2 = PixelCheckSum($aWinPos[0]+73, $aWinPos[1]+66, $aWinPos[0]+83, $aWinPos[1]+76) If $aWinPos[0] < 1440 Then GUICtrlSetData($hLabelWindowText, $aWinPos[0]+81 & "(" & $aWinPos[0]+81+1440 &")," & $aWinPos[1]+75 & " : " & $output1) GUICtrlSetData($hLabelCheckText, $aWinPos[0]+73 & "(" & $aWinPos[0]+73+1440 & ")," & $aWinPos[1]+66 & " : " & $output2) GUICtrlSetData($hLabelScreenText, "W: " & $aWinPos[0]+73 & "(" & $aWinPos[0]+73+1440 &")," & $aWinPos[1]+66 & " C: " & $aWinPos[0]+81 & "," & $aWinPos[1]+75) Else GUICtrlSetData($hLabelWindowText, $aWinPos[0]+81-1440 & "(" & $aWinPos[0]+81 &")," & $aWinPos[1]+75 & " : " & $output1) GUICtrlSetData($hLabelCheckText, $aWinPos[0]+89-1440 & "(" & $aWinPos[0]+89 &")," & $aWinPos[1]+84 & " : " & $output2) GUICtrlSetData($hLabelScreenText, "W: " & $aWinPos[0]+73-1440 & "(" & $aWinPos[0]+73 & ")," & $aWinPos[1]+66 & " C: " & $aWinPos[0]+81 & "," & $aWinPos[1]+75) ;GUICtrlSetData($hLabel2, $aWinPos[1]+75) EndIf GUISetState(@SW_SHOW, $hGUI3) $iLast_Mouse_X = $aWinPos[0] $iLast_Mouse_Y = $aWinPos[1] $pWindowCaptureX = $aWinPos[0] $pWindowCaptureY = $aWinPos[1] ; *** Box ; Tried it here - doesn't work ;~ Global $Graphic = GUICtrlCreateGraphic(176, 55, 2, 20) ;~ Global $Graphic = GUICtrlCreateGraphic(194, 55, 2, 20) ;~ Global $Graphic = GUICtrlCreateGraphic(176, 55, 20, 2) ;~ Global $Graphic = GUICtrlCreateGraphic(176, 73, 20, 2) ;~ Global $Graphic = GUICtrlCreateGraphic(0, 0, 1, 1) EndIf Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Local $aWinPos = WinGetPos("MagWin") $pWindowMagWinX = $aWinPos[0] $pWindowMagWinY = $aWinPos[1] ;GUISetState(@SW_HIDE, $hGUI3) GUIDelete($hGUI3) ; Clear up Mag GUI _WinAPI_SelectObject($hMagDC, $oObj) _WinAPI_DeleteObject($hPen) _WinAPI_ReleaseDC(0, $hDeskDC) _WinAPI_ReleaseDC($hMag_GUI, $hMagDC) ;GUISetState(@SW_HIDE, $hMag_G GUIDelete($hGUI4) GUIDelete($hMag_GUI) ExitLoop Case $hButtonMOK GUISetState(@SW_HIDE, $hGUI3) Local $aWinPos = WinGetPos("Capture") Local $TWPx = $aWinPos[0]+81 ;+81 Top Left Corner; +85 Middle Local $TWPy = $aWinPos[1]+75 ;+75 Top Left Corner; +80 Middle ;*** WINDOW COORDS = x+81 & y+75 (top left of picker square) If $aWinPos[0] > 1440 Then $aWinPos[0] = $aWinPos[0]-1440 $TWPx = $TWPx-1440 EndIf Local $output0 = PixelCheckSum($TWPx-8, $TWPy-9, $TWPx-8+10, $TWPy+1) ;_FOEA_WinAPI_DrawRect(LRChecksum($TWPx-8), $TWPy-9, LRChecksum($TWPx-8)+10, $TWPy+1, 0xFFFFFF, 50) MsgBox($MB_SYSTEMMODAL, "Results ", _ "Window Coords" & @CRLF & _ $TWPx & "(" & $TWPx+1440 & "), " & $TWPy & @CRLF & _ "Checksum0: " & $output0 & @CRLF) GUISetState(@SW_SHOW, $hGUI3) WinActivate($hGUI3, "Capture") Case $hButtonMUp _FOEA_ButtonMUp() Case $hButtonMDown _FOEA_ButtonMDown() Case $hButtonMRight _FOEA_ButtonMRight() Case $hButtonMLeft _FOEA_ButtonMLeft() EndSwitch WEnd Func _FOEA_Loupe($aWinPos) Local $iX, $iY DllCall("gdi32.dll", "int", "StretchBlt", _ "int", $hMagDC, "int", 10, "int", 10, "int", 110, "int", 110, _ "int", $hDeskDC, "int", $aWinPos[0]+68, "int", $aWinPos[1]+61, "int", 20, "int", 20, _ "long", $SRCCOPY) DllCall("gdi32.dll", "int", "StretchBlt", _ "int", $hMagDC, "int", 130, "int", 10, "int", 110, "int", 110, _ "int", $hDeskDC, "int", $aWinPos[0]+70, "int", $aWinPos[1]+63, "int", 7, "int", 7, _ "long", $SRCCOPY) ; Appears initially - then disappears... Global $Graph1 = GUICtrlCreateGraphic(170, 57, 8, 16, $SS_WHITERECT) Global $Graph2 = GUICtrlCreateGraphic(170, 73, 31, 8, $SS_WHITERECT) Global $Graph3 = GUICtrlCreateGraphic(193, 57, 8, 16, $SS_WHITERECT) Global $Graph4 = GUICtrlCreateGraphic(170, 49, 31, 8, $SS_WHITERECT) ; This apears to be needed to stop the Magnify window moving Global $Graph5 = GUICtrlCreateGraphic(0, 0, 1, 1) ;Tried this too - no difference GUISetState(@SW_SHOW, $Graph1) GUISetState(@SW_SHOW, $Graph2) GUISetState(@SW_SHOW, $Graph3) GUISetState(@SW_SHOW, $Graph4) EndFunc ;==>Loupe Func _FOEA_ButtonMUp() Local $aWinPos = WinGetPos("Capture") WinMove($hGUI3, "Capture", $aWinPos[0], $aWinPos[1]-1) EndFunc Func _FOEA_ButtonMDown() Local $aWinPos = WinGetPos("Capture") WinMove($hGUI3, "Capture", $aWinPos[0], $aWinPos[1]+1) EndFunc Func _FOEA_ButtonMRight() Local $aWinPos = WinGetPos("Capture") WinMove($hGUI3, "Capture", $aWinPos[0]+1, $aWinPos[1]) EndFunc Func _FOEA_ButtonMLeft() Local $aWinPos = WinGetPos("Capture") WinMove($hGUI3, "Capture", $aWinPos[0]-1, $aWinPos[1]) EndFunc  
    • By XGamerGuide
      I'm trying to display a GIF. However, the GUI should not be visible. Here is an attempt that doesn't work:
      $sGIF = "MyGIF.gif" #Include <IE.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <WINAPI.au3> #include <SendMessage.au3> Global Const $SC_DRAGMOVE = 0xF012 HotKeySet("{ESC}", "_Exit") $hGui = GUICreate("Test", 400, 300, -1, -1, $WS_POPUP, $WS_EX_LAYERED) GUISetBkColor(0xABCDEF) $oIE = _IECreateEmbedded() GUICtrlCreateObj($oIE, 10, 10, 380, 280) _WinAPI_SetLayeredWindowAttributes($hGUI, 0xABCDEF, 250) _IENavigate($oIE, $sGIF) GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_PRIMARYDOWN _SendMessage($hGUI, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndSwitch WEnd Func _Exit() Exit  
    • By Hermes
      Hello, the script below will read column A from an excel file - and if a value matches in the browser, it will click the corresponding link and click on a specific button to paste the data, then writes "Completed" in Column B. It will continue to read from the excel file and do the same thing for all the remaining rows.
      #Include "Chrome.au3" #Include "wd_core.au3" #Include "wd_helper.au3" #Include "WinHttp.au3" #include <MsgBoxConstants.au3> #include <File.au3> #include <IE.au3> #include <Array.au3> #include <INet.au3> #include <AutoItConstants.au3> #include <WinAPIFiles.au3> #include <GDIPlus.au3> #include <Excel.au3> #Include "WinHttp.au3" #Include "_HtmlTable2Array.au3" Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "table1.html") _WD_LoadWait($sSession) _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") Local $sElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") ;ConsoleWrite ("mat-table " & $sElement & @CRLF) Local $aArray1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//td[contains(@class,'data')]", $sElement, True) sleep(1000) For $i = 0 to UBound($aArray1) - 1 $aArray1[$i] = _WD_ElementAction($sSession, $aArray1[$i], 'text') Next ;_ArrayDisplay($aArray1) ;Email variables $SmtpServer = "" ; address for the smtp-server to use - REQUIRED $FromName = "Hermes" ; name from who the email was sent $FromAddress = "sender@gmail.com" ; address from where the mail should come $ToAddress = "recipient@gmail.com" ; destination address of the email - REQUIRED, use commas (,) to add more email addresses $Subject = "File not found" ; subject from the email - can be anything you want it to be $Body = "File not found!" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed $CcAddress = "" ; address for cc - leave blank if not needed $BccAddress = "" ; address for bcc - leave blank if not needed $Importance = "High" ; Send message priority: "High", "Normal", "Low" $Username = "" ; username for the account used from where the mail gets sent - REQUIRED $Password = "" ; password for the account used from where the mail gets sent - REQUIRED $IPPort = 25 ; port used for sending the mail $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS $tls = 0 ; enables/disables TLS when required Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters If FileExists($sWorkbook) Then ;Check if the file exist. Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters Local $aArray2 = _Excel_RangeRead($oWorkbook,Default,$oWorkbook.ActiveSheet.Usedrange.Columns("A:A")) Local $iIdx Local $Skipline = 0 ;0==> first line Do Local $temprf For $i = 0 To UBound($aArray2) - 1 $temprf &= $aArray2[$i] _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]") Local $aElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]", $sElement, True) $iIdx = _ArraySearch($aArray1, $aArray2[$i]) If @error Then ContinueLoop _WD_ElementAction($sSession, $aElement[$iIdx], 'click') If $i < $Skipline Then ContinueLoop $oRange = $oWorkbook.ActiveSheet.Range("B" & $i + 1 & ":XFD" & $i + 1) _Excel_RangeCopyPaste($oWorkbook.Activesheet, $oRange) ;Paste Local $oTest4 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "pastebutton") _WD_ElementAction($sSession, $oTest4, 'click') Sleep(1000) ;Save Button Local $save3 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "button.button") _WD_ElementAction($sSession, $save3, 'click') _Excel_RangeWrite($oWorkbook, $oWorkbook.Activesheet, "Completed", "B" & $i+1) sleep(1000) Next Until (Not @error) _Excel_Close($oWorkbook) Else _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) Exit EndIf _WD_LoadWait($sSession) ;Attaching files to emails Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ;Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send $objEmail="" EndFunc ;==>_INetSmtpMailCom Local $aDir = _FileListToArrayRec(@TempDir, "scoped_dir*;chrome_*", $FLTAR_FOLDERS, $FLTAR_NORECUR, $FLTAR_NOSORT, $FLTAR_FULLPATH) Sleep(2000) For $i = 1 To $aDir[0] DirRemove($aDir[$i], $DIR_REMOVE) Next _WD_LoadWait($sSession) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome If the excel file doesn't exists in the folder, it will send an email to a specific recipient.
      What i am trying figure out now is if the excel crashes while the script/loop is running, I want to relaunch the excel file continue to the last row before the excel crashed. So if the value of column B is not marked as "completed", it should continue from that row
      Appreciate any help that I can get to achieve this.
      table1.html test.xlsx
×
×
  • Create New...