Sign in to follow this  
Followers 0
colafrysen

Colour each pixel individually

6 posts in this topic

#1 ·  Posted (edited)

Hi i am making a script to create a Sirpenski triangle by using the chaos method.

i got as far a creating the triangle (i know its upside down, but it seems the graphic control has its origo in the top left corner)

but it is very black&White and thus boring. i would like to make it hippie-neon-color-style by colouring each pixel depending on its X and Y coordinates.

so is there a way to colour each pixel individually?

#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

$HEIGHT = @DesktopHeight
$WIDTH  = @DesktopWidth
$QUALITY= InputBox ("Quality","This equals the tries made to create a point" & @CRLF & "The higher the number the better the picture" & @CRLF & "It is recomended to use a value of at least 10000." & @CRLF & "For best result on large screen use a value of 50000",10000,"",400,200)
If @error <> 0 then Exit

$GUI = GUICreate("Sierpins Fractal", $WIDTH, $HEIGHT, 0, 0, BitOR($WS_BORDER, $WS_POPUP), $WS_EX_WINDOWEDGE)
$GRAPH = GUICtrlCreateGraphic(0, 0, $WIDTH, $HEIGHT);BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))
GUISetState(@SW_SHOW)
GUICtrlSetBkColor(-1, 0xffffff)
GUICtrlSetColor(-1, 0)

_GO()
While 1
    $Gui_action = GUIGetMsg()
    Switch $Gui_action
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd

Func _GO()
    GUICtrlSetColor(-1, 0)
$Y = Random(0,1)
$X = Random(0,1)
For $k=0 To $QUALITY Step 1
$N = Random(0,1)
If $N<=1/3 Then
$x *= 0.5
$y *= 0.5
EndIf
If 1/3<$N and $N<=2/3 Then
$X = 0.5*(0.5+$X)
$y = 0.5*(1+$Y)
EndIf
If 2/3<$N Then
$X = 0.5*(1+$X)
$Y = 0.5*($Y)
EndIf
$SET_X = ($X * $WIDTH)
$SET_Y = ($Y * $HEIGHT)
GUICtrlSetGraphic($GRAPH, $GUI_GR_PIXEL, $SET_X, $SET_Y)
;~ GUICtrlSetColor(-1, 0)
ToolTip ($k & @CRLF & ($k/$QUALITY)*100 & "%" )
Next
GUICtrlSetColor(-1, 0)
EndFunc
Edited by colafrysen

[font="Impact"]Use the helpfile, It´s one of the best exlusive features of Autoit.[/font]http://support.microsoft.com/kb/q555375ALIBI Run - a replacement for the windows run promptPC Controller - an application for controlling other PCs[size="1"]Science flies us to the moon. Religion flies us into buildings.[/size][size="1"]http://bit.ly/cAMPZV[/size]

Share this post


Link to post
Share on other sites



Use GUICtrlSetGraphic(-1, $GUI_GR_COLOR, 0x000000)

.. where 0x000000 is of course the color.

However you will get a great speed boost if you do it in GDI+ instead.


Broken link? PM me and I'll send you the file!

Share this post


Link to post
Share on other sites

colafrysen,

Look at the Help file for GUICtrlSetGraphic and the $GUI_GR_COLOR type. It lets you set the drawing colour for the next $GUI_GR_* write operation.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

#4 ·  Posted (edited)

Thanks guys :) , I'll take a look at those

And GDI+ isn't that very difficult? (I haven't looked into it, but the name sounds dangerous)

Edited by colafrysen

[font="Impact"]Use the helpfile, It´s one of the best exlusive features of Autoit.[/font]http://support.microsoft.com/kb/q555375ALIBI Run - a replacement for the windows run promptPC Controller - an application for controlling other PCs[size="1"]Science flies us to the moon. Religion flies us into buildings.[/size][size="1"]http://bit.ly/cAMPZV[/size]

Share this post


Link to post
Share on other sites

And GDI+ isn't that very difficult? (I haven't looked into it, but the name sounds dangerous)

Nah, the examples in the help file should give you enough info to get you started and there are like ten thousand examples posted all around the forums how to use it.


Broken link? PM me and I'll send you the file!

Share this post


Link to post
Share on other sites

Well i got this far, and i like the result it gives me onscreen... But i am never satesfied. now i want to able to write the output to a file and create a picture that way. so i guess that GDI+ is the only way... or is there a function to write to file without GDI? i couldnt find one...

#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <ListBoxConstants.au3>

$HEIGHT = @DesktopHeight
$WIDTH = @DesktopWidth
;~ $QUALITY = InputBox("Quality", "This equals the tries made to create a point" & @CRLF & "The higher the number the better the picture" & @CRLF & "It is recomended to use a value of at least 10000." & @CRLF & "For best result on large screen use a value of 50000", 10000, "", 400, 200)
If @error <> 0 Then Exit
Global $Hex_Func, $QUALITY

$GUI = GUICreate("Preferences", 250, 232, 193, 125)
$Acurracy = GUICtrlCreateInput("10000", 56, 8, 185, 21)
$Label1 = GUICtrlCreateLabel("Acurracy", 8, 8, 46, 17)
$Style = GUICtrlCreateList("", 8, 104, 233, 110, $WS_BORDER + $WS_VSCROLL)
GUICtrlSetData($Style, "Black on White|White on Black|Blue and Green|Blue and Green 2|Spectrum|RGB|Red and Blue|Random Colors", "Blue and Green")

$Inp_Width = GUICtrlCreateInput(@DesktopWidth, 56, 32, 121, 21)
$Inp_Height = GUICtrlCreateInput(@DesktopHeight, 56, 56, 121, 21)
$Label2 = GUICtrlCreateLabel("Width", 8, 32, 32, 17)
$HEIGHT = GUICtrlCreateLabel("Height", 8, 56, 35, 17)
$Label3 = GUICtrlCreateLabel("Color Style", 8, 80, 54, 17)
$GO = GUICtrlCreateButton("Triangiulize", 180, 32, 62, 46, 0)
GUISetState(@SW_SHOW)

Func _Getdata()
    Global $QUALITY = GUICtrlRead($Acurracy)
    Global $HEIGHT = GUICtrlRead($Inp_Height)
    Global $WIDTH = GUICtrlRead($Inp_Width)
    Global $Color_scheme = GUICtrlRead($Style)

    Switch $Color_scheme
        Case "Black on White"
            Global $Hex_Func = "_HEX_Black_White"
        Case "White on Black"
            Global $Hex_Func = "_HEX_White_Black"
        Case "Blue and Green"
            Global $Hex_Func = "_HEX_Blue_Green"
        Case "Blue and Green 2"
            Global $Hex_Func = "_HEX_Blue_Green_2"
        Case "Random Colors"
            Global $Hex_Func = "_HEX_Random"
        Case "Spectrum"
            Global $Hex_Func = "_HEX_Spectrum"
        Case "RGB"
            Global $Hex_Func = "_HEX_RGB"
        Case "Red and Blue"
            Global $Hex_Func = "_HEX_Red_Blue"
    EndSwitch
EndFunc   ;==>_Getdata

While 1
    $Gui_action = GUIGetMsg()
    Switch $Gui_action
        Case $GUI_EVENT_CLOSE
            Exit
        Case $GO
            _Getdata()
            _go()
    EndSwitch
WEnd

Func _GO()
    $Triangle = GUICreate("Sierpins Fractal", $WIDTH, $HEIGHT, 0, 0, BitOR($WS_BORDER, $WS_POPUP), $WS_EX_WINDOWEDGE, $GUI)
    $GRAPH = GUICtrlCreateGraphic(0, 0, $WIDTH, $HEIGHT);BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))
    GUISetState(@SW_SHOW)
    
    Switch $Hex_Func
        Case "_HEX_Black_White"
            GUICtrlSetBkColor($GRAPH, 0xFFFFFF)
            GUICtrlSetColor(-1, 0)
        Case Else
            GUICtrlSetBkColor($GRAPH, 0x000000)
            GUICtrlSetColor(-1, 0)
    EndSwitch
    
    GUICtrlSetColor(-1, 0)
    $Y = Random(0, 1)
    $X = Random(0, 1)

    GUISetState(@SW_MINIMIZE, $Triangle)

    For $k = 0 To $QUALITY Step 1
        $N = Random(0, 1)
        If $N <= 1 / 3 Then
            $X *= 0.5
            $Y *= 0.5
        EndIf
        If 1 / 3 < $N And $N <= 2 / 3 Then
            $X = 0.5 * (0.5 + $X)
            $Y = 0.5 * (1 + $Y)
        EndIf
        If 2 / 3 < $N Then
            $X = 0.5 * (1 + $X)
            $Y = 0.5 * ($Y)
        EndIf
        $SET_X = ($X * $WIDTH)
        $SET_Y = ($Y * $HEIGHT)

        $PIX = GUICtrlSetGraphic($GRAPH, $GUI_GR_PIXEL, $SET_X, $SET_Y)
        $HEX = Call($Hex_Func, $X, $Y)
;~      $HEX = Call("_hex_dev" ,$X,$Y)
        GUICtrlSetGraphic(-1, $GUI_GR_COLOR, $HEX)
;~ GUICtrlSetColor(-1, 0)
        ToolTip($k & @CRLF & ($k / $QUALITY) * 100 & "%")
    Next
    GUICtrlSetColor(-1, 0)
    ToolTip("")
    GUISetState(@SW_MAXIMIZE, $Triangle)
EndFunc   ;==>_GO

Func _HEX_Black_White($X, $Y)
    $HEX = 0x000000
    Return $HEX
EndFunc   ;==>_HEX_Black_White

Func _HEX_White_Black($X, $Y)
    $HEX = 0xFFFFFF
    Return $HEX
EndFunc   ;==>_HEX_White_Black

Func _HEX_Random($X, $Y)
    $HEX = "0x" & Hex(Random(0, 255), 2) & Hex(Random(0, 255), 2) & Hex(Random(0, 255), 2)
    Return $HEX
EndFunc   ;==>_HEX_Random

Func _HEX_Red_Blue($X, $Y)
    $HEX_X = Round($X * 255, 0)
    $HEX_Y = Round($Y * 255, 0)
    $HEX_Z = Round(($X * 255 * $Y) / 2, 0)
;~ $HEX = Random (0,255*255*255)
    $HEX = "0x" & StringLeft(Hex($HEX_X * $HEX_Y, 4), 2) & "00" & StringRight(Hex($HEX_X * $HEX_Y, 4), 2) ;$HEX_Z,6)
;~  MsgBox(0,"",$hex)
    Return $HEX
EndFunc   ;==>_HEX_Red_Blue

Func _HEX_Blue_Green($X, $Y)
    $HEX_X = Round($X * 255, 0)
    $HEX_Y = Round($Y * 255, 0)
    $HEX_Z = Round(($X * 255 * $Y) / 2, 0)
    $HEX = "0x00" & Hex($HEX_X * $HEX_Y, 4)
    Return $HEX
EndFunc   ;==>_HEX_Blue_Green

Func _HEX_Blue_Green_2($X, $Y)
    $HEX_X = Round($X * 255, 0)
    $HEX_Y = Round($Y * 255, 0)
    $HEX_Z = Round(($X * 255 * $Y) / 2, 0)
;~ $HEX = Random (0,255*255*255)
    $HEX = "0x" & StringLeft(Hex($HEX_X * $HEX_Y, 4), 2) & Hex( $Y*255,2) & StringRight(Hex($HEX_X * $HEX_Y, 4), 2) ;$HEX_Z,6)
;~  MsgBox(0,"",$hex)
    Return $HEX
EndFunc   ;==>_HEX_DEV

Func _HEX_Spectrum($X, $Y)
    $HEX_X = Round($X * 255, 0)
    $HEX_Y = Round($Y * 255, 0)
    $HEX_Z = Round(($X * 255 * $Y) / 2, 0)
;~ $HEX = Random (0,255*255*255)
    $HEX = "0x" & Hex($x*255,2) & Hex( $Y*255,2) & StringRight(Hex($HEX_X * $HEX_Y, 4), 2) ;$HEX_Z,6)
;~  MsgBox(0,"",$hex)
    Return $HEX
EndFunc   ;==>_HEX_DEV

Func _HEX_RGB($X, $Y)
    $HEX_X = Round($X * 255, 0)
    $HEX_Y = Round($Y * 255, 0)
    $HEX_Z = Round(($X * 255 * $Y) / 2, 0)
;~ $HEX = Random (0,255*255*255)
    $HEX = "0x" & Hex($x*255,2) & Hex( $Y*255,2) & Hex(-Abs($x*255),2) ;$HEX_Z,6)
;~  MsgBox(0,"",$hex)
    Return $HEX
EndFunc   ;==>_HEX_DEV

Func _HEX_DEV($X, $Y)
    $HEX_X = Round($X * 255, 0)
    $HEX_Y = Round($Y * 255, 0)
    $HEX_Z = Round(($X * 255 * $Y) / 2, 0)
;~ $HEX = Random (0,255*255*255)
    $HEX = "0x" & Hex($x*255,2) & Hex( $Y*255,2) & Hex(-Abs($x*255),2) ;$HEX_Z,6)
;~  MsgBox(0,"",$hex)
    Return $HEX
EndFunc   ;==>_HEX_DEV

PS. i know that some functions contains things that do not fill a function, like "-Abs($x*255)", but i experimented so much with them so i left them there for easy editing later on.


[font="Impact"]Use the helpfile, It´s one of the best exlusive features of Autoit.[/font]http://support.microsoft.com/kb/q555375ALIBI Run - a replacement for the windows run promptPC Controller - an application for controlling other PCs[size="1"]Science flies us to the moon. Religion flies us into buildings.[/size][size="1"]http://bit.ly/cAMPZV[/size]

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0