Jump to content
Sign in to follow this  
hazed

$WM_COMMAND and multiple comboboxes

Recommended Posts

hazed

I'm trying to use $WM_command to do some creative Auto_complete in a combobox, This works when i Force

$hWndCombo = GUICtrlGetHandle($input[$x][62])

where $input[$x][62] is the handle of the combo.

What I would like is to reuse this code, for multple combo boxes, I can get windows id of the other windows using GUIGetCursorInfo, but not any of the combo boxes, they are always returned as 0.

So How can get the ID of a the Combobox that my cursor is at?

Share this post


Link to post
Share on other sites
Melba23

hazed,

_WinAPI_GetFocus returns the control that currently has keyboard input - sounds like just the job. :oops:

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
hazed

consolewrite(_WinAPI_GetFocus()&@tab& GUICtrlGetHandle($input[$x][62])& @tab&$ilParam&@lf)

returns when I'm sitting on the control.

0x0012106E 0x00120ACE 0x00120ACE - which to me means that I ilParam = GUICtrlGetHandle($input[$x][62]) and not _WinAPI_GetFocus().

This isn't helping much. to put things into perpective. $input[$x][62] is the handle of the combo in tab($x) which tab is created only if needed and it's an exact duplicate of the previous Tab. (sort of like do you have more, here is page 2,3,4,5...etc)

I guess when I create the comboboxes, I can create an array which maps the what the GUICtrlGetHandle() of each comboboxes in each tab when I create the tab. And then do an arraysearch or something similar to find which combobox I'm dealing with and use different WM_edit_changed() based upon the index.

So

comboarray[$x][1] = GUICtrlGetHandle($input[$x][60])

comboarray[$x][2] = GUICtrlGetHandle($input[$x][62])

comboarray[$x][3] = GUICtrlGetHandle($input[$x][72]).

Since I know the $X,

for $i=1 to 3

if comboarray[$x][$i] = ilparam then exitloop

next

....

Switch $iCode

Case $CBN_CLOSEUP

Case $CBN_KILLFOCUS

WM_validate()

Case $CBN_EDITCHANGE

switch $i

case 1

WM_edit_changed_combo1()

case 2

WM_edit_changed_combo2()

case 3

WM_edit_changed_combo3()

endswitch

EndSwitch

or something like that.... wish I could find a better way.

Share this post


Link to post
Share on other sites
Melba23

hazed,

This code distinguishes between the 2 combos using their ControlIDs - why are you looking for handles? :oops:

#include <GuiConstantsEx.au3>
#include <WindowsConstants.au3>
#include <GuiComboBox.au3>

Dim $sString = "Hello|world|AutoIt|rules|and|more|some|data"

$hGUI = GUICreate("Test", 500, 500)

$cCombo_1 = GUICtrlCreateCombo("", 10, 10, 200, 20)
GUICtrlSetData(-1, $sString, "Hello")

$cCombo_2 = GUICtrlCreateCombo("", 10, 100, 200, 20)
GUICtrlSetData(-1, $sString, "Hello")

GUIRegisterMsg($WM_COMMAND, "WM_COMMAND")

GUISetState()

Do
Until GUIGetMsg() = $GUI_EVENT_CLOSE

Func WM_COMMAND($hWnd, $Msg, $wParam, $lParam)
    Local $iIDFrom = BitAND($wParam, 0x0000FFFF)
    Local $iCode = BitShift($wParam, 16)

    Switch $iCode
        Case $CBN_EDITCHANGE
            Switch $iIDFrom
                Case $cCombo_1
                    _GUICtrlComboBox_AutoComplete($cCombo_1)
                Case $cCombo_2
                    _GUICtrlComboBox_AutoComplete($cCombo_2)
            EndSwitch
    EndSwitch

    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_COMMAND

If you are still having difficulty identifying your combos, please post some code which shows the problem - then we can get a better idea of what is happening. :bye:

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • odaylton
      By odaylton
      Hello everyone ,
      Text translated from Portuguese by google - please apologize for any errors

      Once again I need a light from the gurus of this wonderful website
      I am fanatic by combobox for its usability but I am not able to uncertain images within lists ...
      I know uncertain icons, and cursors but I am not able to insert gif or jpg images.
      1) How to solve this ...
      2) will the path is to convert gif into bmp and then uncertain ... how to do that?
      #include <GUIConstantsEx.au3> #include <GuiImageList.au3> #include <GuiListView.au3> #include <WinAPI.au3> #include <WindowsConstants.au3> ;dados de mouse #include <WinAPIRes.au3> ;COMBO #include <GuiComboBoxEx.au3> ;Fonts #include <FontConstants.au3> ;obter imagem de arquivo #include <GDIPlus.au3> #include <WinAPIGdi.au3> Example() Func Example() Local $hGUI, $hImage, $hCombo, $hFont Local $idListview, $hImage Local $sWow64 = "" Local $Pasta = "C:\WINDOWS\Cursors\3dgarro.cur" Local $PastaROMs = @MyDocumentsDir & "\Stella\ROMs\" ;com barra no final $hGUI = GUICreate("ImageList", 500, 310) GUISetFont(14, 400, 0, "Arial") ;<<<<<<<<<<this does not work for _GUICtrlComboBoxEx_Create $hCombo = _GUICtrlComboBoxEx_Create($hGUI, "", 2, 2, 494, 200) ;GUICtrlSetFont($hCombo, 14, 400, 0, "Arial");<<<<<<<<<<It does not work ; ;Create a handle to a font object $hFont = _WinAPI_CreateFont(30, 0, 0, 0, 400, False, False, False, $DEFAULT_CHARSET, $OUT_DEFAULT_PRECIS, $CLIP_DEFAULT_PRECIS, $DEFAULT_QUALITY, 0, 'Arial') ;Pass the handle to _WinAPI_SetFont _WinAPI_SetFont($hCombo, $hFont) $idListview = GUICtrlCreateListView("", 2, 50, 494, 250, BitOR($LVS_SHOWSELALWAYS, $LVS_NOSORTHEADER, $LVS_REPORT)) _GUICtrlListView_SetExtendedListViewStyle($idListview, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_GRIDLINES, $LVS_EX_DOUBLEBUFFER)) GUISetState(@SW_SHOW) ; Initialize GDI+ library _GDIPlus_Startup() ; Load images $hImage = _GUIImageList_Create(120, 70, 6, 2) ;32,32,5,5) ; $DadosCombo = "Escolha|" & _GUIImageList_Add($hImage, _GUICtrlComboBoxEx_CreateSolidBitMap($hCombo, 0x0000FF, 120, 70)) ;Local $aCursors[] = [32650, 32512, 32515, 32649, 32651, 32513, 32648, 32646, 32643, 32645, 32642, 32644, 32516, 32514] For $i = 1 To 10 $sFile = FileOpenDialog("Please select an image", $PastaROMs, "Image (*.jpg;*.png;*.bmp;*.gif;*.tif)", BitOR($FD_PATHMUSTEXIST, $FD_FILEMUSTEXIST)) If @error Then Exit MsgBox(BitOR($MB_TOPMOST, $MB_ICONERROR), "Error", "No image file has been selected", 30) $a = _GDIPlus_BitmapCreateFromFile ($sFile);<<<<< ok If @error Or Not $hImage Then MsgBox(BitOR($MB_TOPMOST, $MB_ICONERROR), "Error", "This file isn't supported by GDIPlus!") Else $b=_GUIImageList_Add($hImage, $a);<<<<<< Return -1 $DadosCombo &= "|" & $i & "_img_princ.gif""|" & $b EndIf Next _GUICtrlListView_SetImageList($idListview, $hImage, 1) _GUICtrlComboBoxEx_SetImageList($hCombo, $hImage) ; Add columns _GUICtrlListView_AddColumn($idListview, "Icons - Mouses", 350) ; Add items $a = StringSplit($DadosCombo, "|") For $i = 1 To $a[0] Step 2 _GUICtrlListView_AddItem($idListview, $a[$i], $a[$i + 1]) _GUICtrlComboBoxEx_AddString($hCombo, $a[$i], $a[$i + 1], $a[$i + 1]) Next ;AutoIt_Debugger_Command:Disable_Debug ; Loop until the user exits. Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() ;AutoIt_Debugger_Command:Enable_Debug EndFunc ;==>Example tks
    • aiter
      By aiter
      I  possibly misunderstood the value of combo boxes, but I thought you could type a value, press enter and the combo box would store that value.
      The reason for wanting this is to store a history of typed commands into the combo box (accepted by pressing enter).
       
      After hours of trying to trap enter on a combobox I realized that the enter event was not registering.
      I had code like this (which used to work on a input box), but it does not for a combobox (because it does not accept enter)
      unc WM_COMMAND($hWnd, $Msg, $wParam, $lParam) Local $nNotifyCode = BitShift($wParam, 16) Local $nID = BitAND($wParam, 0x0000FFFF) If $hWnd = $CmdForm Then If $nID = $ComboInput Then ; useed to work on a normal input box If _IsPressed('0D') Then ; enter was pressed, respond DoCmd() Anyone able to help?
    • Grasoft
      By Grasoft
      Greetings everyone,
      I'm writing a software that edit an ini file section by section with adding/renaming abilities
      but whenever I manually change the combobox to value other than constducted previously, I cannot get this value.
      THIS is a clean version of the code:
      #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <GuiStatusBar.au3> #include <GuiEdit.au3> #include <MsgBoxConstants.au3> #Region ### START Koda GUI section ### Form=C:\Program Files (x86)\AutoIt3\SciTE\Koda\Forms\QuickRepEditList7.kxf $SecMgr = GUICreate("Sections Manager", 1159, 690) GUISetFont(12, 800, 0, "MS Sans Serif") $EditSec = GUICtrlCreateEdit("", 45, 45, 1090, 644, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_WANTRETURN, $WS_HSCROLL, $ES_NOHIDESEL)) $Edit2 = GUICtrlCreateEdit("", 11, 45, 33, 617, BitOR($ES_RIGHT, $ES_READONLY, $ES_WANTRETURN)) GUICtrlSetData(-1, StringFormat(" 1:\r\n 2:\r\n 3:\r\n 4:\r\n 5:\r\n 6:\r\n 7:\r\n 8:\r\n 9:\r\n10:\r\n11:\r\n12:\r\n13:\r\n14:\r\n15:\r\n16:\r\n17:\r\n18:\r\n19:\r\n20:\r\n21:\r\n22:\r\n23:\r\n24:\r\n25:\r\n26:\r\n27:\r\n28:\r\n29:\r\n30:")) $Label1 = GUICtrlCreateLabel("Select Section:", 7, 13, 126, 24) GUICtrlSetFont(-1, 11, 800, 0, "MS Sans Serif") $Savesec = GUICtrlCreateButton("Save Changes", 375, 7, 129, 33) $NewSec = GUICtrlCreateButton("New Section", 700, 7, 121, 33) $SecDwn = GUICtrlCreateButton("Section Down", 830, 7, 137, 33) $SecUp = GUICtrlCreateButton("Section Up", 980, 7, 129, 33) $copystrs = GUICtrlCreateButton("*******", 507, 7, 73, 33) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") $HeavySep = GUICtrlCreateButton("====", 581, 7, 73, 33) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") Global $SecSel Global $secno Global $secn = "NULLz" Global $sFilePathtemp Global $aArray Global $SecNames Global $secnnew Global $ssecn $SecSel = GUICtrlCreateCombo("", 110, 10, 257, 25, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL)) queysecs() Filledit() GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### $secno=GUICtrlRead($SecSel) $changed=0 While 1 $secn = GUICtrlRead($SecSel) $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE saveeditedmsg() Exit Case $SecSel $secno=GUICtrlRead($SecSel) queysecs() Filledit() Case $Savesec saveeditedmsg() queysecs() Case $NewSec Case $SecDwn Case $SecUp Case $copystrs ClipPut("**************************************************************************************************************************************************************") Case $HeavySep ClipPut("==============================================================================================================================================================") EndSwitch WEnd Func queysecs();query section names $sFilePath = @ScriptDir & "\" & "Txt_Reps.ini" $aArray = IniReadSectionNames($sFilePath) $SecNames = $aArray[1] If $secn = "NULLz" Then $secn = $aArray[1] EndIf If Not @error Then For $i = 2 To $aArray[0] $SecNames = $SecNames & "|" & $aArray[$i] Next GUICtrlSetData($SecSel, "", "") GUICtrlSetData($SecSel, $SecNames, $secn) $secno = $secn EndIf EndFunc ;==>queysecs Func Filledit(); transfer section values on the edit box GUICtrlSetData($EditSec, "") $sFilePath = @ScriptDir & "\" & "Txt_Reps.ini" For $i = 1 To 30 $sRead = IniRead($sFilePath, $secn, $i, "") GUICtrlSetData($EditSec, $sRead & @CRLF, 1) Next GUISetState(@SW_SHOW) EndFunc ;==>Filledit Func saveeditedmsg(); save or rename modified section If $secn <> $secno Then $iMsgBoxAnswer = MsgBox(3, "NEW/RENAME", "Press YES to Add this as NEW section" & @CRLF & "Press NO to rename and save this section from " & $secno & "To" & $secn) Select Case $iMsgBoxAnswer = 6 ;YES $secn = $secno save($secn) $secn = GUICtrlRead($SecSel) $secno = $secn Case 7 ;NO $sFilePath = @ScriptDir & "\" & "Txt_Reps.ini" IniRenameSection($sFilePath, $secno, $secn) save($secn) $secn = GUICtrlRead($SecSel) $secno = $secn EndSelect Else $iMsgBoxAnswer = MsgBox(4, "Do you want to save changes to this section", "Save Section: " & $secn) Select Case $iMsgBoxAnswer = 6 ;yes save($secn) EndSelect EndIf EndFunc ;==>saveeditedmsg ;MsgBox(4, "Do you want to add this to Database?",$secn) Func save($ssecn); save edit control to a file and then rewrite modified values by line order. $sFilePathtemp = FileOpen(@ScriptDir & "\" & "tempo.quickrep", $FO_READ + $FO_OVERWRITE + $FO_CREATEPATH + $FO_UTF8) $sFilePath = @ScriptDir & "\" & "Txt_Reps.ini" FileWrite($sFilePathtemp, GUICtrlRead($EditSec)) $sFilePathtemp = FileOpen(@ScriptDir & "\" & "tempo.quickrep", $FO_READ + $FO_UTF8) For $i = 1 To 30 $sRead = FileReadLine($sFilePathtemp, $i) IniWrite($sFilePath, $ssecn, $i, $sRead) Next GUISetState(@SW_SHOW) EndFunc ;==>save And this is with som test msg boxes to know how to get it
      #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <GuiStatusBar.au3> #include <GuiEdit.au3> #include <MsgBoxConstants.au3> #Region ### START Koda GUI section ### Form=C:\Program Files (x86)\AutoIt3\SciTE\Koda\Forms\QuickRepEditList7.kxf $SecMgr = GUICreate("Sections Manager", 1159, 690) GUISetFont(12, 800, 0, "MS Sans Serif") $EditSec = GUICtrlCreateEdit("", 45, 45, 1090, 644, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_WANTRETURN, $WS_HSCROLL, $ES_NOHIDESEL)) $Edit2 = GUICtrlCreateEdit("", 11, 45, 33, 617, BitOR($ES_RIGHT, $ES_READONLY, $ES_WANTRETURN)) GUICtrlSetData(-1, StringFormat(" 1:\r\n 2:\r\n 3:\r\n 4:\r\n 5:\r\n 6:\r\n 7:\r\n 8:\r\n 9:\r\n10:\r\n11:\r\n12:\r\n13:\r\n14:\r\n15:\r\n16:\r\n17:\r\n18:\r\n19:\r\n20:\r\n21:\r\n22:\r\n23:\r\n24:\r\n25:\r\n26:\r\n27:\r\n28:\r\n29:\r\n30:")) $Label1 = GUICtrlCreateLabel("Select Section:", 7, 13, 126, 24) GUICtrlSetFont(-1, 11, 800, 0, "MS Sans Serif") $Savesec = GUICtrlCreateButton("Save Changes", 375, 7, 129, 33) $NewSec = GUICtrlCreateButton("New Section", 700, 7, 121, 33) $SecDwn = GUICtrlCreateButton("Section Down", 830, 7, 137, 33) $SecUp = GUICtrlCreateButton("Section Up", 980, 7, 129, 33) ;$LineNo = GUICtrlCreateInput("LineNo", 664, 7, 65, 28) $copystrs = GUICtrlCreateButton("*******", 507, 7, 73, 33) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") $HeavySep = GUICtrlCreateButton("====", 581, 7, 73, 33) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") Global $SecSel Global $secno Global $secn = "NULLz" Global $sFilePathtemp Global $aArray Global $SecNames Global $secnnew Global $ssecn $SecSel = GUICtrlCreateCombo("", 110, 10, 257, 25, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL)) queysecs() Filledit() GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### $secno=GUICtrlRead($SecSel) $changed=0 While 1 $secn = GUICtrlRead($SecSel) ;If $secn <> $secno and $changed=0 Then ; $secns = $secn ; $changed=1 ;EndIf $nMsg = GUIGetMsg() ;MsgBox(4, "TEST1?", $secn) Switch $nMsg Case $GUI_EVENT_CLOSE saveeditedmsg() Exit Case $SecSel ;MsgBox(4, "TEST?", GUICtrlRead($SecSel)) ;MsgBox(4, "TEST1?", $secns) ;MsgBox(4, "TEST2?", $secn) $secno=GUICtrlRead($SecSel) ;saveeditedmsg() queysecs() Filledit() ;$changed=0 Case $Savesec saveeditedmsg() queysecs() Case $NewSec Case $SecDwn Case $SecUp Case $copystrs ClipPut("**************************************************************************************************************************************************************") Case $HeavySep ClipPut("==============================================================================================================================================================") EndSwitch ; MsgBox(4, "TEST2?", $secn) WEnd Func queysecs();query section names $sFilePath = @ScriptDir & "\" & "Txt_Reps.ini" $aArray = IniReadSectionNames($sFilePath) $SecNames = $aArray[1] ; MsgBox(4, "test3?", $secn) If $secn = "NULLz" Then $secn = $aArray[1] EndIf If Not @error Then For $i = 2 To $aArray[0] $SecNames = $SecNames & "|" & $aArray[$i] Next GUICtrlSetData($SecSel, "", "") GUICtrlSetData($SecSel, $SecNames, $secn) $secno = $secn ;MsgBox(4, "test4?", $secn) EndIf EndFunc ;==>queysecs Func Filledit(); transfer section values on the edit box GUICtrlSetData($EditSec, "") $sFilePath = @ScriptDir & "\" & "Txt_Reps.ini" For $i = 1 To 30 $sRead = IniRead($sFilePath, $secn, $i, "") GUICtrlSetData($EditSec, $sRead & @CRLF, 1) Next GUISetState(@SW_SHOW) EndFunc ;==>Filledit Func saveeditedmsg(); save or rename modified section If $secn <> $secno Then $iMsgBoxAnswer = MsgBox(3, "NEW/RENAME", "Press YES to Add this as NEW section" & @CRLF & "Press NO to rename and save this section from " & $secno & "To" & $secn) Select Case $iMsgBoxAnswer = 6 ;YES $secn = $secno save($secn) $secn = GUICtrlRead($SecSel) $secno = $secn Case 7 ;NO $sFilePath = @ScriptDir & "\" & "Txt_Reps.ini" IniRenameSection($sFilePath, $secno, $secn) save($secn) $secn = GUICtrlRead($SecSel) $secno = $secn EndSelect Else $iMsgBoxAnswer = MsgBox(4, "Do you want to save changes to this section", "Save Section: " & $secn) Select Case $iMsgBoxAnswer = 6 ;yes save($secn) EndSelect EndIf EndFunc ;==>saveeditedmsg ;MsgBox(4, "Do you want to add this to Database?",$secn) Func save($ssecn); save edit control to a file and then rewrite modified values by line order. $sFilePathtemp = FileOpen(@ScriptDir & "\" & "tempo.quickrep", $FO_READ + $FO_OVERWRITE + $FO_CREATEPATH + $FO_UTF8) $sFilePath = @ScriptDir & "\" & "Txt_Reps.ini" FileWrite($sFilePathtemp, GUICtrlRead($EditSec)) $sFilePathtemp = FileOpen(@ScriptDir & "\" & "tempo.quickrep", $FO_READ + $FO_UTF8) For $i = 1 To 30 $sRead = FileReadLine($sFilePathtemp, $i) IniWrite($sFilePath, $ssecn, $i, $sRead) Next GUISetState(@SW_SHOW) EndFunc ;==>save The ini file withthe au3 attached
      This is how I want: when the user changes the combo, the script will check the text combo. In case of changed text it will ask user if I should rename or add it as a new section and then save. If not changed the text of combo it will ask to save only.
      IF NOT possible, Will it possible with _GUICtrlComboBox__GUICtrlComboBoxEx_Create or _GUICtrlComboBoxEx_Create or not
       
      THANK you very much in advance
      QuickSecEdit.zip
    • Xandy
      By Xandy
      I have a bunch of SDL_Surfaces loaded into memory.  I want to list them in a ComboBox.
      Using this code, I can load images to the combobox from file but not from existing SDL_Surface memory
      CODE ISN"T MEANT TO RUN
      ; Create combobox pic list example $aControl[$iControl_id][$eControl_data] = _GUICtrlComboBoxEx_Create($gui, $data_value, $data_x, $data_y, $data_w, $data_h, $CBS_DROPDOWNLIST) ; Image List for ComboboxEx Local $hImage = _GUIImageList_Create($gTile_w, $gTile_h, 6) ; Fill hImage with SDL_Surfaces stored in memory: aNPC_surf[scale][type][way][frame] For $i = 0 To 1 ; This works but only from file: ;_GUIImageList_AddBitmap($hImage, $gFolder_graphics & $gaWorld_info[$player.iWorld_cur][$eWi_filename] & "Tiles\" & $i & ".bmp") ; I've broken up a sprite sheet and want to insert into combobox from memory ;_GUIImageList_Add($hImage, $aNPC_surf[1][1][1][$i]) _GUIImageList_Add($hImage, _GDIPlus_BitmapCreateFromMemory($aNPC_surf[1][1][1][$i]), True) ;_GDIPlus_BitmapCreateFromMemory($aNPC_surf[1][1][1][$i]) ; Add the index number to combobox item _GUICtrlComboBoxEx_AddString($aControl[$eNPC_iPic_type][$eControl_data], $i, $i, $i) Next ; Set hImage list to combobox control _GUICtrlComboBoxEx_SetImageList($aControl[$eNPC_iPic_type][$eControl_data], $hImage) Anyone know if I can convert from SDL_Surface to hBitmap?  Maybe I'm doing something else wrong.
       
      I've seen hBitmap converted to SDL_Surface but I don't really understand it yet: 
       
      My full script can be found here:
       
    • odaylton
      By odaylton
      I even understand that the Handle generated by _WinAPI_LoadCursor is not an Icon but how to display the image in the Combobox
      Here is the listing and please tell me how to make the current user current cursor image uncertainty
      #include <GUIConstantsEx.au3> #include <GuiImageList.au3> #include <GuiListView.au3> #include <WinAPI.au3> #include <WindowsConstants.au3> ;dados de mouse #include <WinAPIRes.au3> ;COMBO #include <GuiComboBoxEx.au3> Example() Func Example() Local $hGUI, $hImage, $hCombo Local $idListview, $hImage Local $sWow64 = "" Local $Pasta="C:\WINDOWS\Cursors\3dgarro.cur" $hGUI = GUICreate("ImageList Mouse Icons", 400, 300) $hCombo = _GUICtrlComboBoxEx_Create($hGUI, "", 2, 2, 394, 100) $idListview = GUICtrlCreateListView("", 2, 104, 394, 200, BitOR($LVS_SHOWSELALWAYS, $LVS_NOSORTHEADER, $LVS_REPORT)) _GUICtrlListView_SetExtendedListViewStyle($idListview, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_GRIDLINES, $LVS_EX_DOUBLEBUFFER)) GUISetState(@SW_SHOW) ; Load images $hImage = _GUIImageList_Create(16, 16) ;teste _GUIImageList_AddIcon($hImage, $Pasta) ;<<<<<<<<<<<<<<<<<<<<<this $hIcon= _WinAPI_CopyCursor(_WinAPI_LoadCursor(0,$IDC_HAND));32649 ; Hand cursor _GUIImageList_AddIcon($hImage, $hIcon);<<<<<<<<<<<<<<<<<< erro for $i=1 to 15 $hIcon= _WinAPI_CopyCursor(_WinAPI_LoadCursor(0, $i));<<<<<<<<<<<<<<<<< _GUIImageList_AddIcon($hImage, $hIcon);<<<<<<<<<<<< Next _GUIImageList_AddIcon($hImage, $Pasta) _GUICtrlListView_SetImageList($idListview, $hImage, 1) _GUICtrlComboBoxEx_SetImageList($hCombo, $hImage) ; Add columns _GUICtrlListView_AddColumn($idListview, "Items", 120) ; Add items $a=StringSplit("testeIcone|HAND|APPSTARTING|ARROW|CROSS|HELP|IBEAM|ICON|NO|SIZE|SIZEALL|SIZENESW|SIZENS|SIZENWSE|SIZEWE|UPARROW|WAIT|testefim","|") For $i=1 to $a[0] _GUICtrlListView_AddItem($idListview, $a[$i], $i-1) _GUICtrlComboBoxEx_AddString($hCombo, $a[$i], $i-1) Next ; Loop until the user exits. Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() EndFunc ;==>Example Note that only the initial image is uncertain because it comes from a file
      And the one that would be the last enters as the second
      And the background is black how to transform into transparent
      imagem de cursor.bmp
×