Jump to content
Sign in to follow this  
MrVietA2

Slider control problem

Recommended Posts

Hello !

I tried to create 2 slider to set the state of video in my script :

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <SliderConstants.au3>
#include <DSEngine.au3>

Global $MovieGUI, $VideoPlay, $VideoStop, $VideoOpen, $VideoPos, $VideoVol, $ViewerVideo, $VideoPos2
Global $mVol, $mLength, $mVideoPlaying

$MovieGUI = GUICreate("Movie Player", 740, 590, -1, -1, -1)
$VideoPlay = GUICtrlCreateButton("PLAY", 20, 520, 100, 50)
$VideoStop = GUICtrlCreateButton("STOP", 140, 520, 100, 50)
$VideoOpen = GUICtrlCreateButton("OPEN", 260, 520, 100, 50)
$VideoSlow = GUICtrlCreateButton("SLOW", 380, 520, 100, 50)
$VideoSpeed = GUICtrlCreateButton("SPEED", 500, 520, 100, 50)
$VideoPos = GUICtrlCreateSlider(20, 490, 660, 25, $TBS_ENABLESELRANGE)
$ViewerVideo = GUICreate("", 660, 400, 20, 70, $WS_POPUP, BitOR($WS_EX_TOOLWINDOW, $WS_DISABLED, $WS_EX_MDICHILD), $MovieGUI)
$VideoPos2 = GUICtrlCreateSlider(0, 380, 660, 25, $TBS_ENABLESELRANGE)
GUICtrlSetBkColor(-1, 0x0)
GUISetBkColor(0, $ViewerVideo)
WinSetTrans($ViewerVideo, "", 220)
GUISetState(@SW_SHOW, $ViewerVideo)
GUISetState(@SW_SHOW, $MovieGUI)

While 1
$MSG = GUIGetMsg()
Switch $MSG
Case $GUI_EVENT_CLOSE
Exit
Case $VideoOpen
$PathVideo = FileOpenDialog("Open Video", "", "All Video(*.Avi;*.Wmp;*.Mkv;*.Flv;*.Mp4;*.Mpg;*.Ts)|All File(*.*)|Video(*.Avi; *.Wmp)", 1 + 4)
PlayVideo($PathVideo)
EndSwitch

If $mVideoPlaying = True Then
;~ GUICtrlSetState($VideoPos2, $GUI_ONTOP)
;
Switch $MSG
Case $VideoStop
Engine_StopPlayback()
GUICtrlSetData($VideoPos, Engine_GetLength())
GUISetBkColor(0x00000, $ViewerVideo)
WinSetTrans($ViewerVideo, "", 220)
Case $VideoPlay
Switch GUICtrlRead($VideoPlay)
Case "PLAY"
Engine_PausePlayback()
GUICtrlSetData($VideoPlay, "PAUSE")
Case "PAUSE"
Engine_StartPlayback()
GUICtrlSetData($VideoPlay, "PLAY")
EndSwitch
Case $VideoSpeed
;
Case $VideoSlow
;
EndSwitch
;
$mGGCI = GUIGetCursorInfo($MovieGUI)
If IsArray($mGGCI) And $mGGCI[4] = $VideoPos And $mGGCI[2] = 1 Then
While $mGGCI[2]
$mGGCI = GUIGetCursorInfo($MovieGUI)
$mPos = GUICtrlRead($VideoPos)
Sleep(1)
WEnd
Engine_SetPosition($mPos)
EndIf

GUICtrlSetData($VideoPos, Engine_GetPosition())

GUICtrlSetData($VideoPos2, Engine_GetPosition())EndIf
WEnd

Func PlayVideo($SavePath)
If $SavePath <> "" Then
Global $mVol = GUICtrlRead($VideoVol)
Engine_LoadFile($SavePath, $ViewerVideo)
Engine_StartPlayback()
$mLength = Engine_GetLength()
GUICtrlSetLimit($VideoPos, $mLength, 0)

GUICtrlSetLimit($VideoPos2, $mLength, 0)$mVideoPlaying = True
EndIf
EndFunc ;==>PlayVideo

The slider 2 ($VideoPos2) is hidden while the film is screened, but I want it to be shown. Could you tell me how to do this ?

All answers are welcome.

DSEngine.zip

Edited by MrVietA2

Share this post


Link to post
Share on other sites

First thing I would try is giving that control $WS_EX_TOPMOST extended style.

EDIT:or

perhaps

GUICtrlSetState($VideoPos2, $GUI_ONTOP)

Edited by JohnOne

AutoIt Absolute Beginners    Require a serial    Pause Script    Video Tutorials by Morthawt   ipify 

Monkey's are, like, natures humans.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DigiBox
      Hello!
      Please help me with this small problem I've encountered while learning to make GUI.
      I'm not able to get the set slider values out of sliders and I can't figure out why.
      The slider value in the example is preset to 1, but whatever I set the slider to, it returns the value 3 when I click Apply and I havn't set any value to 3.
      Where is that 3 coming from?
       
      #include <SliderConstants.au3> #include <MsgBoxConstants.au3> #include <GUIConstantsEx.au3> Global $LRSlider Opt("GUIOnEventMode", 1) Global $Form1 = GUICreate("test slider", 200, 200, -1, -1) Global $LRSlider = GUICtrlCreateSlider(50, 50, 100, 20, $TBS_TOOLTIPS) GUICtrlSetLimit($LRSlider, 50, 1) GUICtrlSetData($LRSlider, 1) GUISetOnEvent($GUI_EVENT_CLOSE, "Exit1") Global $ApplyButton = GUICtrlCreateButton("APPLY", 100, 150, 89, 17) GUICtrlSetOnEvent($ApplyButton, "Apply") GUISetState(@SW_SHOW) Func Apply() GUICtrlRead($LRSlider) MsgBox(0, 0, $LRSlider) GUICtrlSetData($LRSlider, $LRSlider) EndFunc ;==>Apply Func Exit1() Exit EndFunc ;==>Exit1 While 1 Sleep(200) WEnd  
    • By AndyS01
      I want to create a slider that has values representing colors, like the slider on the _ChooseColor() GUI in the Misc.au3 UDF, but the max value for a slider is 32767.  
      Here is my test code:
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <SliderConstants.au3> #include <Misc.au3> $hGUI = GUICreate("Test", 100, 560) $BtnID = GUICtrlCreateButton("Choose", 10, 10, 50, 25) ;~ GUICtrlSetOnEvent($BtnID, "handle_choose_btn") $flags = BitOR($TBS_AUTOTICKS, $TBS_VERT) $iSliderID = GUICtrlCreateSlider(10, 50, 40, 420, $flags) $hSlider_hWnd = GUICtrlGetHandle($iSliderID) $iMaxVal = 32767 GUICtrlSetLimit($iSliderID, $iMaxVal, 0) ; change min/max value GUISetState() GUIRegisterMsg($WM_VSCROLL, "WM_V_Slider") While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit Case $GUI_EVENT_PRIMARYUP ToolTip("") case $BtnID handle_choose_btn() EndSwitch WEnd ; React to a slider movement Func WM_V_Slider($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam If $lParam = $hSlider_hWnd Then $iValue = GUICtrlRead($iSliderID) ConsoleWrite("+++: $iValue = " & $iValue & @CRLF) ToolTip(getRGB($iValue)) EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_V_Slider ; Extract the RGB components from the color value Func getRGB($iColorVal) Local $hexstr, $b, $g, $r, $rgb $hexstr = StringFormat("%06X", $iColorVal) $r = StringMid($hexstr, 1, 2) $g = StringMid($hexstr, 3, 2) $b = StringMid($hexstr, 5, 2) $rgb = StringFormat("" & $iColorVal & " - rgb: %02s %02s %02s", $r, $g, $b) Return ($rgb) EndFunc ;==>getRGB Func handle_choose_btn() $color = _ChooseColor(2, 255, 0, $hGUI) ConsoleWrite("+++: $color = " & Hex($color, 8) & @CRLF) EndFunc ;==>handle_choose_btn  
    • By nacerbaaziz
      Hi guys
      I have a question about the slider  controle
      There is a problem with screen readers, wen we Using a screen reader We usually move between GUI controls using the tab key.
      But when you create a slider , beside to it there are  buttons and check boxes or any other controls, When I move between the GUI controls using the tab key I can not find the slider.
      But if it were alone in the window, I would find it normally.
      Is there a solution to Solve this problem please?
      This is the code i tried
      #include <GUIConstantsEx.au3>
      #include <WindowsConstants.au3>
      #include <MsgBoxConstants.au3>
      #include <SliderConstants.au3>
      main()
      Func main()
          GUICreate("slider", 200, 200, -1, -1)
      GUICtrlCreateGroup("slider", 10, 10, 240, 50)
          Local $idSlider1 = GUICtrlCreateSlider(50, 30, 200, 20, BitOr($TBS_DOWNISLEFT, $TBS_BOTH))
          GUICtrlSetLimit(-1, 100, 0)
      ;GUIStartGroup("")
          Local $idButton = GUICtrlCreatebutton("Value?", 75, 70, 70, 20)
          GUISetState(@SW_SHOW)
          GUICtrlSetData($idSlider1, 10)
      while 1
      switch GUIGetMsg()
      case $GUI_EVENT_CLOSE
      exit
      case $idButton
                  MsgBox($MB_SYSTEMMODAL, "slider1", GUICtrlRead($idSlider1))
      endSwitch
      Wend
      EndFunc
      [Click and drag to move]
       
       
    • By b9k
      Hi, I am stuck on a GUI problem and would like your help to solve it.
      I am trying to automate the SoundWire Server app to match my current system volume level while it is minimized to the notification area (so no clicking or stealing focus),
      I can already get the handle and alter the tracker position by sending a WM_SETPOS message, but somehow the actual volume is not changed: I think I need to do something else to trigger the event handler for the value change and propagate it correctly.
      This is the control summary from Au3 info:
      >>>> Window <<<< Title: SoundWire Server Class: #32770 Position: 441, 218 Size: 566, 429 Style: 0x94CA00C4 ExStyle: 0x00050101 Handle: 0x0000000000510E12 >>>> Control <<<< Class: msctls_trackbar32 Instance: 4 ClassnameNN: msctls_trackbar324 Name: Advanced (Class): [CLASS:msctls_trackbar32; INSTANCE:4] ID: 6002 Text: Position: 51, 222 Size: 47, 126 ControlClick Coords: 1, 101 Style: 0x5001000A ExStyle: 0x00000000 Handle: 0x00000000001234C8 >>>> Mouse <<<< Position: 496, 567 Cursor ID: 2 Color: 0xF0F0F0 >>>> StatusBar <<<< >>>> ToolsBar <<<< >>>> Visible Text <<<< Default multimedia device Tray on Start Static Server Address: 192.168.1.8 Status: Connected to B9K~OP3 Audio Output Audio Input Level Record to File Input Select: 44.1 kHz Minimize to Master Volume Mute >>>> Hidden Text <<<< Slider2 Mute OK Cancel Label Balance Slider1 Volume Front L/R Fr C/LFE Side L/R Back L/R
      I am attaching the program in question so you don't have to install it (i don't know if it is portable enough, tough): 

      SoundWire Server_files.zip

      Thanks in advance and I hope I didn't post in the wrong section
    • By Elzie
      Hi I am trying to make a gui that uses a slide to change pictures and uses internet-read from  guinness function.
      Thanks for your help.
      Ok found the issue
      #include <GUIConstantsEx.au3> #include <SliderConstants.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <WinAPI.au3> #include <WinAPIRes.au3> #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 229, 165, 2392, 436) $Slider = GUICtrlCreateSlider(32, 128, 150, 29) GUICtrlSetLimit($Slider, 2, 1) GUICtrlSetData($Slider, 1) GUICtrlSetBkColor($Slider, 0x0099FF) GUICtrlSetColor(-1, 0xA6CAF0) $hSlider_Handle = GUICtrlGetHandle(-1) $sFile1 = _GetURLImage("http://www.pendriveapps.com/wp-content/uploads/autoit.jpg ", @TempDir) $sFile2 = _GetURLImage("http://domoticx.com/wp-content/uploads/autoit-logo-200x154.jpg ", @TempDir) $Hpic1 = GUICtrlCreatePic($sFile1, 56, 8, 108, 108, BitOR($SS_NOTIFY, $WS_GROUP, $WS_CLIPSIBLINGS)) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Slider $a = GUICtrlRead($Slider) If $a = 2 Then GUICtrlDeleteImage($Hpic1) $Hpic2 = GUICtrlCreatePic($sFile2, 56, 8, 108, 108, BitOR($SS_NOTIFY, $WS_GROUP, $WS_CLIPSIBLINGS)) ElseIf $a = 1 Then GUICtrlDeleteImage($hpic2) $Hpic1 = GUICtrlCreatePic($sFile1, 56, 8, 108, 108, BitOR($SS_NOTIFY, $WS_GROUP, $WS_CLIPSIBLINGS)) EndIf EndSwitch WEnd Func _GetURLImage($sURL, $sDirectory = @ScriptDir) ; Author ........: guinness Local $hDownload, $sFile $sFile = StringRegExpReplace($sURL, "^.*/", "") If @error Then Return SetError(1, 0, $sFile) EndIf If StringRight($sDirectory, 1) <> "\" Then $sDirectory = $sDirectory & "\" EndIf $sDirectory = $sDirectory & $sFile If FileExists($sDirectory) Then Return $sDirectory EndIf $hDownload = InetGet($sURL, $sDirectory, 17, 1) While InetGetInfo($hDownload, 2) = 0 If InetGetInfo($hDownload, 4) <> 0 Then InetClose($hDownload) Return SetError(1, 0, $sDirectory) EndIf Sleep(105) WEnd InetClose($hDownload) Return $sDirectory EndFunc ;==>_GetURLImage Func GUICtrlDeleteImage($iCtrlID) ; Author ........: guinness Local Const $STM_SETIMAGE = 0x0172 Local $aSetImage = 0, _ $bReturn = True, _ $iMsg = 0 Switch _WinAPI_GetClassName($iCtrlID) Case 'Button' ; button, checkbox, groupbox, radiobutton. Local $aButton = [$IMAGE_BITMAP, $IMAGE_ICON] $aSetImage = $aButton $aButton = 0 Case 'Static' ; icon, label, picture. Local $aStatic = [$IMAGE_BITMAP, $IMAGE_CURSOR, $IMAGE_ICON] $aSetImage = $aStatic $aStatic = 0 $iMsg = $STM_SETIMAGE Case Else $bReturn = False EndSwitch If $bReturn Then $bReturn = False Local $hImage = 0 For $i = 0 To UBound($aSetImage) - 1 $hImage = GUICtrlSendMsg($iCtrlID, $iMsg, $aSetImage[$i], 0) If $hImage <> 0 Then Switch $aSetImage[$i] Case $IMAGE_BITMAP $bReturn = _WinAPI_DeleteObject($hImage) Case $IMAGE_CURSOR $bReturn = _WinAPI_DeleteObject($hImage) If Not $bReturn Then $bReturn = _WinAPI_DestroyCursor($hImage) > 0 EndIf Case $IMAGE_ICON $bReturn = _WinAPI_DeleteObject($hImage) If Not $bReturn Then $bReturn = _WinAPI_DestroyIcon($hImage) > 0 EndIf EndSwitch ExitLoop EndIf Next If Not $bReturn Then $bReturn = GUICtrlSetImage($iCtrlID, 'shell32.dll', -50) > 0 EndIf EndIf Return $bReturn EndFunc ;==>GUICtrlDeleteImage  
×
×
  • Create New...