Jump to content
Sign in to follow this  
tes5884

Task Scheduler semi-working

Recommended Posts

tes5884

Hi Guys,

The attached script collects logs from various servers on my network, prints them into logs.txt, and emails them to me, daily. When I run the compiled script by clicking on the EXE it works beautifully.

However, when it's run through the scheduler, I get an email with a blank txt file. This happens when I run the scheduled task manually and when it runs automatically.

The SMTP part is from Jos, Thank you Jos.

#region Logs retriever
$log = "log.txt"

If FileExists($log) Then
FileDelete($log)
EndIf
RunWait(@ComSpec & " /c " & "psloglist.exe @servers.txt -d 1 -f we -r > " & $log, "", @SW_HIDE)
#endregion

;
;##################################
; Include
;##################################
#Include #region Logs retriever
$log = "log.txt"

If FileExists($log) Then
FileDelete($log)
EndIf
RunWait(@ComSpec & " /c " & "psloglist.exe @servers.txt -d 1 -f we -r > " & $log, "", @SW_HIDE)
#endregion

;
;##################################
; Include
;##################################
#Include <file.au3>
;##################################
; Variables
;##################################
$SmtpServer = "smtp.emailsrvr.com"              ; address for the smtp-server to use - REQUIRED
$FromName = "Logs"                      ; name from who the email was sent
$FromAddress = "server@respondpower.com" ; address from where the mail should come
$ToAddress = "tspitz@majorenergy.com"   ; destination address of the email - REQUIRED
$Subject = "Daily Server Logs"                   ; subject from the email - can be anything you want it to be
$Body = "Warning and Error logs."                              ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = $log                       ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = ""       ; address for cc - leave blank if not needed
$BccAddress = ""     ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "server@respondpower.com"                    ; username for the account used from where the mail gets sent - REQUIRED
$Password = "ab12cd34"                  ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25                            ; port used for sending the mail
$ssl = 0                                ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465                          ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

;##################################
; Script
;##################################
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
    MsgBox(0, "Error sending message", "Error code:" & @error & "  Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
    Local $objEmail = ObjCreate("CDO.Message")
    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress
    Local $i_Error = 0
    Local $i_Error_desciption = ""
    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject
    If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
        $objEmail.HTMLBody = $as_Body
    Else
        $objEmail.Textbody = $as_Body & @CRLF
    EndIf
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~          ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                SetError(1)
                Return 0
            EndIf
        Next
    EndIf
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 then $IPPort = 25
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    If $ssl Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
    EndIf
    ;Update settings
    $objEmail.Configuration.Fields.Update
    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch
    $objEmail.Fields.Update
    ; Sent the Message
    $objEmail.Send
    If @error Then
        SetError(2)
        Return $oMyRet[1]
    EndIf
    $objEmail=""
EndFunc   ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
    $HexNumber = Hex($oMyError.number, 8)
    $oMyRet[0] = $HexNumber
    $oMyRet[1] = StringStripWS($oMyError.description, 3)
    ConsoleWrite("### COM Error !  Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet[1] & @LF)
    SetError(1); something to check for when this function returns
    Return
EndFunc   ;==>MyErrFunc
;##################################
; Variables
;##################################
$SmtpServer = "smtp.myserver.com" ; address for the smtp-server to use - REQUIRED
$FromName = "Logs" ; name from who the email was sent
$FromAddress = "server@myserver.com" ; address from where the mail should come
$ToAddress = "tspitz@myserver.com" ; destination address of the email - REQUIRED
$Subject = "Daily Server Logs" ; subject from the email - can be anything you want it to be
$Body = "Warning and Error logs." ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = $log ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = "" ; address for cc - leave blank if not needed
$BccAddress = "" ; address for bcc - leave blank if not needed
$Importance = "Normal" ; Send message priority: "High", "Normal", "Low"
$Username = "server@myserver.com" ; username for the account used from where the mail gets sent - REQUIRED
$Password = "mypassword" ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25 ; port used for sending the mail
$ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465 ; GMAIL port used for sending the mail
;~ $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

;##################################
; Script
;##################################
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
Local $objEmail = ObjCreate("CDO.Message")
$objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
$objEmail.To = $s_ToAddress
Local $i_Error = 0
Local $i_Error_desciption = ""
If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
$objEmail.Subject = $s_Subject
If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
$objEmail.HTMLBody = $as_Body
Else
$objEmail.Textbody = $as_Body & @CRLF
EndIf
If $s_AttachFiles <> "" Then
Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
For $x = 1 To $S_Files2Attach[0]
$S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
If FileExists($S_Files2Attach[$x]) Then
ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
$objEmail.AddAttachment($S_Files2Attach[$x])
Else
ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
SetError(1)
Return 0
EndIf
Next
EndIf
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
If Number($IPPort) = 0 then $IPPort = 25
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
;Authenticated SMTP
If $s_Username <> "" Then
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
EndIf
If $ssl Then
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
EndIf
;Update settings
$objEmail.Configuration.Fields.Update
; Set Email Importance
Switch $s_Importance
Case "High"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
Case "Normal"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
Case "Low"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
EndSwitch
$objEmail.Fields.Update
; Sent the Message
$objEmail.Send
If @error Then
SetError(2)
Return $oMyRet[1]
EndIf
$objEmail=""
EndFunc ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
$HexNumber = Hex($oMyError.number, 8)
$oMyRet[0] = $HexNumber
$oMyRet[1] = StringStripWS($oMyError.description, 3)
ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF)
SetError(1); something to check for when this function returns
Return
EndFunc ;==>MyErrFunc

Any ideas are greatly appreciated!

Thanks in advance.

Edited by tes5884

Share this post


Link to post
Share on other sites
JLogan3o13

What credentials are you running it under when you run it through Task Scheduler?


√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites
tes5884

Same credentials. Administrator..That was the first thing that came to mind :-(

Edited by tes5884

Share this post


Link to post
Share on other sites
BrewManNH

You need the full path to the files you're accessing in the first part of the script. When you're not logged in, or the task scheduler is running the script, it can't find the files because you don't have a path pointing to them.

Also, move your #include lines to the top of the script, you have them stuck in there after the first part of the script. It's probably not going to be a problem with this script because of the way it's written, but believe me if you start writing bigger scripts and start putting them in the middle like that, it's going to cause all sorts of problems.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
tes5884

Still not working. This is the edited version:

#Include
#RequireAdmin

TraySetState(2)

#region Logs retriever
$log = "C:UserstspitzDropboxCodingLogMailerlog.txt"

If FileExists("C:UserstspitzDropboxCodingLogMailerlog.txt") Then
FileDelete("C:UserstspitzDropboxCodingLogMailerlog.txt")
EndIf
RunWait(@ComSpec & " /k C:UserstspitzDropboxCodingLogMailerpsloglist.exe @C:UserstspitzDropboxCodingLogMailerservers.txt -d 1 -f we -r > C:UserstspitzDropboxCodingLogMailerlog.txt", "", @SW_SHOW)
#endregion

$SmtpServer = "smtp.myserver.com" ; address for the smtp-server to use - REQUIRED
$FromName = "Logs" ; name from who the email was sent
$FromAddress = "server@myserver.com" ; address from where the mail should come
$ToAddress = "tspitz@myemail.com" ; destination address of the email - REQUIRED
$Subject = "Daily Server Logs" ; subject from the email - can be anything you want it to be
$Body = "Warning and Error logs." ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "C:UserstspitzDropboxCodingLogMailerlog.txt" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = "" ; address for cc - leave blank if not needed
$BccAddress = "" ; address for bcc - leave blank if not needed
$Importance = "Normal" ; Send message priority: "High", "Normal", "Low"
$Username = "server@myserver.com" ; username for the account used from where the mail gets sent - REQUIRED
$Password = "mypassword" ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25 ; port used for sending the mail
$ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465 ; GMAIL port used for sending the mail
;~ $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS


Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
Local $objEmail = ObjCreate("CDO.Message")
$objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
$objEmail.To = $s_ToAddress
Local $i_Error = 0
Local $i_Error_desciption = ""
If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
$objEmail.Subject = $s_Subject
If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
$objEmail.HTMLBody = $as_Body
Else
$objEmail.Textbody = $as_Body & @CRLF
EndIf
If $s_AttachFiles <> "" Then
Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
For $x = 1 To $S_Files2Attach[0]
$S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
If FileExists($S_Files2Attach[$x]) Then
ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
$objEmail.AddAttachment($S_Files2Attach[$x])
Else
ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
SetError(1)
Return 0
EndIf
Next
EndIf
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
If Number($IPPort) = 0 then $IPPort = 25
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
;Authenticated SMTP
If $s_Username <> "" Then
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
EndIf
If $ssl Then
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
EndIf
;Update settings
$objEmail.Configuration.Fields.Update
; Set Email Importance
Switch $s_Importance
Case "High"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
Case "Normal"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
Case "Low"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
EndSwitch
$objEmail.Fields.Update
; Sent the Message
$objEmail.Send
If @error Then
SetError(2)
Return $oMyRet[1]
EndIf
$objEmail=""
EndFunc ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
$HexNumber = Hex($oMyError.number, 8)
$oMyRet[0] = $HexNumber
$oMyRet[1] = StringStripWS($oMyError.description, 3)
ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF)
SetError(1); something to check for when this function returns
Return
EndFunc ;==>MyErrFunc

Thanks

Share this post


Link to post
Share on other sites
BrewManNH

What's not working? "Not working" should be outlawed.

  • Like 1

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
tes5884

Sorry. email is being sent, but I'm getting a blank log.txt file.

Just noticed, the log.txt file isn't being created... But the email is being sent.

Thanks

Edited by tes5884

Share this post


Link to post
Share on other sites
BrewManNH

I would move the files in question to a non-protected area of the hard drive and try it again. It's quite possible that it's a permissions issue when running it as a task, especially if it's being run on a server or Windows Vista/7.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
tes5884

I would move the files in question to a non-protected area of the hard drive and try it again. It's quite possible that it's a permissions issue when running it as a task, especially if it's being run on a server or Windows Vista/7.

Can you please expand on

non-protected area of the hard drive

Thanks

Share this post


Link to post
Share on other sites
BrewManNH

Some place that doesn't require authentication to access, like a folder off of the C: root folder, but not in Program Files.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
tes5884

Some place that doesn't require authentication to access, like a folder off of the C: root folder, but not in Program Files.

BrewManNH, it worked. I placed it in a folder off the root. It works now.

Thanks for the help.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • t0nZ
      By t0nZ
      Today I want to share this little project made to check and  notify the expiration of domain users password, in a Microsoft domain.
      Briefly, the script check users domain password expiration and takes actions.
      The script can work on multiple domain groups, taking different actions for every group, there is an .ini file with some options.
      Groups to be checked are defined in the .ini, and the groups must contain only users no other groups.
      The list of users of every group is obtained and if the password expiration in (remaining) days is matched (two possibilities) an email is sent.
      It can be a mail sent directly to the user (ini file : tomail=user) or it can be a mail sent to only one address (ini file : tomail=the@mail.it) (like domain admins...) and in this case the mail contains a report with the users approaching expiration.
      An operation log is always generated.
      In the ini (also the posted one) you can set to have no mail sent (for testing) and/or to have a GUI, but also the GUI is intended only for test, this script is scheduled on a server not logged in, so normally no GUI .
      Update 2018/03/16 : added switch to reset the password expiration, useful if you have for example an user (or 500) with psw expiration withing 3 days and you want to restore expiration within 90 days WITHOUT changing password.
      Used the way as advised by Microsoft  (see the link), but with sth AD.au3 , the fantastic Active Directory UDF
      # First change the pwdlastset to 0 because Microsoft wants it this way $todouser.pwdLastSet = 0 Set-ADUser -Instance $todouser # Change the pwdlastset to the current date/time of the associate DC $todouser.pwdLastSet = -1 Set-ADUser -Instance $todouser Why you should act this way ? Big companies have strange policies listen to me ...
      The code:
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Icon=Icone\Faenza\117.ico #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** ; PEG ; Password Expiration Guardian ; (C) NSC 2018 ; check user domain password expiration and takes actions ; the script can work on multiple domain groups, taking differente actions for every group. ; the groups must contains only users no other groups ; the list of users of every group is obtained and if the password expiration in day is matched (two possibilities) an email is sent. ; It can be a mail sent directly to the user (ini file : tomail=user) ; or it can be a mail sent to only one address (ini file : tomail=the@mail.it) ; and in this case the mail contains a report with the users approaching expiration ; V.0.5 check based on one domain group ; V.1.0 ini file and check based on multiple domain groups ; V.1.5 ini file with general section to activate "test" GUI, and to enable disable mail send ; V.1.6 march 2018 italian "home made" translation of days and months in date ; V.1.7 added flag pwdLastSet to reset pass expiration - intended to use like a one time on/off switch to reset psw expiration #include <AD.au3> #include <File.au3> #include <GuiEdit.au3> #include <_zip.au3> #include <Date.au3> #include <Inet.au3> #include <GUIConstantsEx.au3> #include <GuiEdit.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <Debug.au3> Global $appname = "PEG", $appver = "V.1.7" Global $inifile = @ScriptDir & "\" & $appname & ".ini" Global $geleft = 5, $getop = 5, $gewidth = 790, $geheight = 540 Global $gollogcount = 0, $lastlog = "sicrlf", $cachelog = "", $guititle = "PEG " & $appver, $Gollogedit, $logfile = @ScriptDir & "\" & $appname & "_LOG_", $months2NOTzip = 3 Global $INIgroup, $INItomail, $INImailsubject, $INIsmpt, $INIfromname, $INIfromaddress, $INIdays1, $INIdays2, $INItosend, $arrayINIsections, $guiactive, $flagITA, $flagpwdLastSet ; START program GOLLOG(">>>>>> " & $appname & " " & $appver & " START >>>>>>") CFGctrl() If $guiactive = 1 Then GUI() $groupnumber = 0 While $groupnumber < $arrayINIsections[0] $groupnumber += 1 If $arrayINIsections[$groupnumber] <> "general" Then CFGload($arrayINIsections[$groupnumber]) loaduserS() EndIf WEnd If $guiactive = 1 Then While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE GOLLOG("<<<< STOP <<<<") Exit EndSwitch WEnd EndIf GOLLOG("<<<<<< PEG STOP <<<<<<<") Exit ;STOP program Func GUI() GUICreate($guititle, 800, 560, 100, 200, -1) GUISetBkColor(0x693F54) ; will change background color $Gollogedit = GUICtrlCreateEdit("", $geleft, $getop, $gewidth, $geheight, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_WANTRETURN, $WS_BORDER, $WS_VSCROLL)) GUICtrlSetBkColor(-1, 0xC7BBC1) GUICtrlSetData(-1, "" & @CRLF) GUICtrlSetFont(-1, 9, 800, 0, "consolas") GUICtrlSetColor(-1, 0x090608) GUISetState(@SW_SHOW) GOLLOG("PEG " & $appver & " gui STARTED") EndFunc ;==>GUI Func loaduserS() GOLLOG("workin on group: " & $INIgroup) Local $Nscad = 0 Dim $report[1] = ["Report:"] Local $singlereport = "" Local $usermail = "" Local $username = "" Local $datediff = "" Local $arrayuserpsw Local $iErr _AD_Open() $search1 = _AD_GetGroupMembers($INIgroup) ;$search1 = _AD_RecursiveGetGroupMembers($INIgroup); testing recursive .. in the future maybe If @error = 0 Then Local $conta1 = 0 While $search1[0] > $conta1 $conta1 += 1 $arrayuserpsw = _AD_GetPasswordInfo($search1[$conta1]) $datediff = _DateDiff("D", _NowCalc(), $arrayuserpsw[9]) GOLLOG("USER: " & $search1[$conta1]) GOLLOG("Password expires on: " & $arrayuserpsw[9] & " in " & $datediff & " days") If $datediff = $INIdays1 Or $datediff = $INIdays2 Then GOLLOG("expiration match !") If $INItomail = "user" Then ; this IF is relative to .ini file parameter TOSEND $usermail = _AD_GetObjectAttribute($search1[$conta1], "mail") GOLLOG("sending mail to: " & $usermail) If $flagITA = 1 Then $dataITA = dataITA($arrayuserpsw[9]) Else $dataITA = _DateTimeFormat($arrayuserpsw[9], 1) EndIf Dim $report[1] = ["La tua password scadra' " & $dataITA & ", entro " & $datediff & " giorni."] _ArrayAdd($report, "Modificala per tempo !") If $INItosend = 0 Then GOLLOG("Not sent mail " & $Nscad & ": ") GOLLOG("from :" & $INIfromname & " | " & $INIfromaddress) GOLLOG("to :" & $usermail & " | subject: " & $INImailsubject) Local $reporttext = _ArrayToString($report) GOLLOG("text :" & $reporttext) Else Local $iResponse = _INetSmtpMail($INIsmpt, $INIfromname, $INIfromaddress, $usermail, $INImailsubject, $report, "EHLO " & @ComputerName, "-1") ; perla pearl mail send HS smtp (ehlo required) $iErr = @error If $iResponse = 1 Then GOLLOG("Success! " & "Mail to user sent") Else GOLLOG("Error! " & "Mail failed with error code " & $iErr) EndIf EndIf Else $username = _AD_GetObjectAttribute($search1[$conta1], "displayname") _ArrayAdd($report, "USER: " & $username) _ArrayAdd($report, "Password expires on: " & $arrayuserpsw[9] & " in " & $datediff & " days") $Nscad += 1 If $flagpwdLastSet = 1 Then ; warning : auto pass set GOLLOG("Re-set password expiration for " & $search1[$conta1]) If _AD_ModifyAttribute($search1[$conta1], "pwdLastSet", "0") Then GOLLOG("pwdLastSet to 0 - OK") Else GOLLOG("pwdLastSet to 0 - ERROR " & @error) EndIf If _AD_ModifyAttribute($search1[$conta1], "pwdLastSet", "-1") Then GOLLOG("pwdLastSet to -1 - OK") Else GOLLOG("pwdLastSet to -1 - ERROR " & @error) EndIf EndIf EndIf EndIf WEnd If $Nscad > 0 And $INItomail <> "user" Then _ArrayAdd($report, $Nscad & " user passwords near expiration") If $INItosend = 0 Then GOLLOG("Not sent mail " & $Nscad & ": ") GOLLOG("from :" & $INIfromname & " | " & $INIfromaddress) GOLLOG("to :" & $INItomail & " | subject: " & $INImailsubject) Local $reporttext = _ArrayToString($report) GOLLOG("text :" & $reporttext) Else Local $iResponse = _INetSmtpMail($INIsmpt, $INIfromname, $INIfromaddress, $INItomail, $INImailsubject, $report, "EHLO " & @ComputerName, "-1") ; perla pearl mail send HS smtp (ehlo required) Local $iErr = @error If $iResponse = 1 Then GOLLOG("Success! " & "Mail sent") Else GOLLOG("Error! " & "Mail failed with error code " & $iErr) EndIf EndIf EndIf GOLLOG("checked n° " & $conta1 & " users") Else GOLLOG("error in user search " & @error) EndIf _AD_Close() EndFunc ;==>loaduserS Func dataITA($inputdate) ; Input date in the format "YYYY/MM/DD[ HH:MM:SS]", and translates Tuesday 8 May 2018 -> Martedì 8 maggio 2018 - perla pearl Local $stringaDATAita = _DateTimeFormat($inputdate, 1) Select Case StringInStr($stringaDATAita, "Monday") $stringaDATAita = StringReplace($stringaDATAita, "Monday", "lunedi'") Case StringInStr($stringaDATAita, "Tuesday") $stringaDATAita = StringReplace($stringaDATAita, "Tuesday", "martedi'") Case StringInStr($stringaDATAita, "Wednesday") $stringaDATAita = StringReplace($stringaDATAita, "Wednesday", "mercoledi'") Case StringInStr($stringaDATAita, "Thursday") $stringaDATAita = StringReplace($stringaDATAita, "Thursday", "giovedi'") Case StringInStr($stringaDATAita, "Friday") $stringaDATAita = StringReplace($stringaDATAita, "Friday", "venerdi'") Case StringInStr($stringaDATAita, "Saturday") $stringaDATAita = StringReplace($stringaDATAita, "Saturday", "sabato") Case StringInStr($stringaDATAita, "Sunday") $stringaDATAita = StringReplace($stringaDATAita, "Sunday", "Domenica") EndSelect Select Case StringInStr($stringaDATAita, "January") $stringaDATAita = StringReplace($stringaDATAita, "January", "gennaio") Case StringInStr($stringaDATAita, "February") $stringaDATAita = StringReplace($stringaDATAita, "February", "febbraio") Case StringInStr($stringaDATAita, "March") $stringaDATAita = StringReplace($stringaDATAita, "March", "marzo") Case StringInStr($stringaDATAita, "April") $stringaDATAita = StringReplace($stringaDATAita, "April", "aprile") Case StringInStr($stringaDATAita, "May") $stringaDATAita = StringReplace($stringaDATAita, "May", "maggio") Case StringInStr($stringaDATAita, "June") $stringaDATAita = StringReplace($stringaDATAita, "June", "giugno") Case StringInStr($stringaDATAita, "July") $stringaDATAita = StringReplace($stringaDATAita, "July", "luglio") Case StringInStr($stringaDATAita, "August") $stringaDATAita = StringReplace($stringaDATAita, "August", "agosto") Case StringInStr($stringaDATAita, "September") $stringaDATAita = StringReplace($stringaDATAita, "September", "settembre") Case StringInStr($stringaDATAita, "October") $stringaDATAita = StringReplace($stringaDATAita, "October", "ottobre") Case StringInStr($stringaDATAita, "November") $stringaDATAita = StringReplace($stringaDATAita, "November", "novembre") Case StringInStr($stringaDATAita, "December") $stringaDATAita = StringReplace($stringaDATAita, "December", "dicembre") EndSelect Return ($stringaDATAita) EndFunc ;==>dataITA Func GOLLOG($logtext) ; Gollog V.2.3 gestione CRLF si o no ; gestione a capo automatico oltre i xx caratteri; gestione pulitura ogni totmila char Perla pearl ; basta aggiungere |nocrlf50 a fine stringa, dove 50 sono gli xx caratteri, conta la prima riga dove si supera quel limite. ; to declare $gollogcount = 0,$lastlog="sicrlf",$cachelog="",$guititle = "nomegui",$Gollogedit,$logfile = @ScriptDir & "\GOLLOG_LOG_", $months2NOTzip = 3 ; e anche le misure dell'edit: $geleft = 32, $getop = 32, $gewidth = 553, $geheight = 377 ; #include <File.au3> #include <GuiEdit.au3> #include <_zip.au3> ; to insert FUNCs: GOLLOG CLEANEDIT GOLzipZIP $gollogcount += StringLen($logtext) ;Local $logfile = @ScriptDir & "\GOLLOG_LOG_" ; now global Local $logfiletimerange = @YEAR & @MON Local $linelimit = StringRight($logtext, 2) If StringRight($logtext, 9) = "|nocrlf" & $linelimit Then $logtext = StringTrimRight($logtext, 9) Local $acapo = "no" Else Local $acapo = "si" $gollogcount += 4 If $gollogcount > 13000 Then Sleep(3000) cleanedit() ; MsgBox(64, "debug", $conta) $gollogcount = 0 EndIf EndIf If $acapo = "no" And (StringLen($cachelog) <= $linelimit) Then ;pearl perla non a capo se If $lastlog = "nocrlf" Then If WinExists($guititle) Then ; per non scrivere in gui se questa non esiste _GUICtrlEdit_AppendText($Gollogedit, $logtext) EndIf Else If WinExists($guititle) Then ; per non scrivere in gui se questa non esiste _GUICtrlEdit_AppendText($Gollogedit, @MDAY & "/" & @MON & "_" & @HOUR & ":" & @MIN & " " & $logtext) EndIf EndIf $cachelog = $cachelog & $logtext $lastlog = "nocrlf" Else If $lastlog = "nocrlf" Then If WinExists($guititle) Then ; per non scrivere in gui se questa non esiste _GUICtrlEdit_AppendText($Gollogedit, $logtext & @CRLF) EndIf $cachelog = $cachelog & $logtext _FileWriteLog($logfile & $logfiletimerange & ".txt", $cachelog) $cachelog = "" Else If WinExists($guititle) Then ; per non scrivere in gui se questa non esiste _GUICtrlEdit_AppendText($Gollogedit, @MDAY & "/" & @MON & "_" & @HOUR & ":" & @MIN & " " & $logtext & @CRLF) EndIf _FileWriteLog($logfile & $logfiletimerange & ".txt", $logtext) EndIf $lastlog = "sicrlf" EndIf EndFunc ;==>GOLLOG Func cleanedit() ; cleaning of edit every n° lines (in program put if $nlines > xlines then this function) GUICtrlDelete($Gollogedit) $Gollogedit = GUICtrlCreateEdit("", $geleft, $getop, $gewidth, $geheight) ;, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_WANTRETURN, $WS_BORDER)) GUICtrlSetData(-1, "" & @CRLF) GUICtrlSetFont(-1, 9, 800, 0, "consolas") GUICtrlSetColor(-1, 0090608) GUICtrlSetBkColor(-1, 0xF0DAE5) GUICtrlSetCursor(-1, 3) EndFunc ;==>cleanedit Func GOLzipLOG($months2NOTzip) ; zipping old log leaving unzipped only n months GOLLOG("Starting old logs zipping..") ; path extraction zone Local $logfiletimerange = @YEAR & @MON Local $sDrive = "", $sDir = "", $sFileName = "", $sExtension = "" Local $arraylogpath = _PathSplit($logfile & $logfiletimerange & ".txt", $sDrive, $sDir, $sFileName, $sExtension) Local $logpath = $arraylogpath[1] & $arraylogpath[2] Local $hSearch = FileFindFirstFile($logfile & "*.txt") ; searching for logs Local $logconta = 0 While 1 ; single file processing cycle Local $sFileName = FileFindNextFile($hSearch) ; If there is no more file matching the search. If @error Then ExitLoop Local $stringtime = StringTrimRight(StringRight($sFileName, 10), 4) ;obtaining year-month like 201609 If $logfiletimerange - $stringtime > $months2NOTzip Then ;zipping If Not FileExists($logfile & ".zip") Then If Not _Zip_Create($logfile & ".zip", 1) Then GOLLOG("Error " & @error & " creating " & $logfile & ".zip") Else GOLLOG("Created new log archive: " & $logfile & ".zip") EndIf Else GOLLOG("adding to archive: " & $logfile & ".zip") EndIf If Not _zip_additem($logfile & ".zip", $logpath & $sFileName) Then GOLLOG("Error " & @error & " zipping: " & $logpath & $sFileName) Else GOLLOG("Added: " & $logpath & $sFileName) $logconta += 1 If Not FileDelete($logpath & $sFileName) Then GOLLOG("ERROR - Unable to DELETE log file " & $logpath & $sFileName) EndIf EndIf EndIf WEnd GOLLOG("Finished = " & $logconta & " log files zipped") EndFunc ;==>GOLzipLOG Func CFGctrl() ; check ini files and load section names GOLLOG("checkin' INI file..|nocrlf50") If FileExists($inifile) Then $guiactive = IniRead($inifile, "general", "GUI", "?") If $guiactive = "?" Then GOLLOG("INI incomplete, missing section 'general', value GUI") ExitwithError() EndIf $flagITA = IniRead($inifile, "general", "dataITA", "?") If $flagITA = "?" Then GOLLOG("INI incomplete, missing section 'general', value dataITA") ExitwithError() EndIf $flagpwdLastSet = IniRead($inifile, "general", "pwdLastSet", "?") If $flagpwdLastSet = "?" Then GOLLOG("INI incomplete, missing section 'general', value pwdLastSet") ExitwithError() EndIf GOLLOG("reading section names...|nocrlf50") $arrayINIsections = IniReadSectionNames($inifile) GOLLOG("N°" & $arrayINIsections[0] - 1 & " groups to process") Else $message1 = "error: no saved settings !?" GOLLOG($message1) ExitwithError() EndIf GOLLOG("..completed") EndFunc ;==>CFGctrl Func CFGload($section) ; load single ini file section values $INIgroup = IniRead($inifile, $section, "group", "?") $INItomail = IniRead($inifile, $section, "tomail", "?") $INItosend = IniRead($inifile, $section, "tosend", "?") $INIdays1 = IniRead($inifile, $section, "days1", "?") $INIdays2 = IniRead($inifile, $section, "days2", "?") $INImailsubject = IniRead($inifile, $section, "mailsubject", "?") $INIsmpt = IniRead($inifile, $section, "smtp", "?") $INIfromname = IniRead($inifile, $section, "fromname", "?") $INIfromaddress = IniRead($inifile, $section, "fromaddress", "?") EndFunc ;==>CFGload Func ExitwithError() GOLLOG("**********ERROR and STOP****************") Exit EndFunc ;==>ExitwithError The example .ini:
       
      [group1] group=G_IT_PASSWORD_MONITORED days1=5 days2=2 tomail=yourgroup@yourdomain.it ;tosend=user; send mails to the domain user mail address, otherwise send to specified address tosend=0 ;tosend ;1 send mails, 0 disable mails for testing mailsubject=Domain users going to expire passwords smtp=smtp.your.own.server fromname=Password Expiration Guardian fromaddress=PEG@NSC.it [group2] group=G_IT_PASSWORD_NOTIFIED days1=5 days2=2 tomail=user ;tosend=user; send mails to the domain user mail address, otherwise send to specified address tosend=0 ;tosend ;1 send mails, 0 disable mails for testing mailsubject=Password is expiring ! smtp=smtp.your.own.server fromname=Password Expiration Guardian fromaddress=PEG@NSC.it [general] GUI=1 ;1 gui ON for testing, 0 gui disabled dataITA = 1 ;1 translates datetime in italian, 0 for ENG pwdLastSet = 0 ;1 tries to reset the 'pwdLastSet' attribute (you must have permissions), 0 do nothing  
       
    • legend
      By legend
      Hello
      I'm using the code below to send mails using our internal relay server. 
      We got a Helpdesk system named Remedy. Our users can send us a mails using outlook 2010, and we'll get a ticket.
      The problem is if I send a mail using the above script our ticket system can't display unicode characters, like ex: Æ Ø Å. It will display them as: questionmarks: "? ? ?" inside our ticket system. In the outlook inbox it looks fine showing unicode symbols, but in our ticket system the unicode characters will be replaced by questionmarks.
      The thing is, if they send a mail using outlook, it works fine, but using the script above it doesen't.
      I tried to save my script with encoding: UTF-8 with BOM, but it didn't fix it.
       
      All suggestions are very welcome
       
       
       
       
    • mLipok
      By mLipok
      I very long time was using
       

       
       
      In the end, I found that at present my needs I need to modify it. And here it is:
      #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 ;~ #AutoIt3Wrapper_Run_Debug_Mode=Y ;(Y/N) Run Script with console debugging. Default=N #Region INCLUDE ;################################## ; Include ;################################## #include <file.au3> #EndRegion INCLUDE #Region Variables ;################################## ; Variables ;################################## Global Enum _ $g__INetSmtpMailCom_ERROR_FileNotFound = 1, _ $g__INetSmtpMailCom_ERROR_Send, _ $g__INetSmtpMailCom_ERROR_ObjectCreation, _ $g__INetSmtpMailCom_ERROR_COUNTER Global Const $g__cdoSendUsingPickup = 1 ; Send message using the local SMTP service pickup directory. Global Const $g__cdoSendUsingPort = 2 ; Send the message using the network (SMTP over the network). Must use this to use Delivery Notification Global Const $g__cdoAnonymous = 0 ; Do not authenticate Global Const $g__cdoBasic = 1 ; basic (clear-text) authentication Global Const $g__cdoNTLM = 2 ; NTLM ; Delivery Status Notifications Global Const $g__cdoDSNDefault = 0 ; None Global Const $g__cdoDSNNever = 1 ; None Global Const $g__cdoDSNFailure = 2 ; Failure Global Const $g__cdoDSNSuccess = 4 ; Success Global Const $g__cdoDSNDelay = 8 ; Delay Global Const $g__cdoDSNSuccessFailOrDelay = 14 ; Success, failure or delay #EndRegion Variables #Region Example Script ;################################## ; Example Script ;################################## ;~ _Example() Func _Example() Local $sSmtpServer = "MailServer" ; address for the smtp-server to use - REQUIRED Local $sFromName = "Name" ; name from who the email was sent Local $sFromAddress = "your@Email.Address.com" ; address from where the mail should come Local $sToAddress = "your@Email.Address.com" ; destination address of the email - REQUIRED Local $sSubject = "Userinfo" ; subject from the email - can be anything you want it to be Local $sBody = "" ; the messagebody from the mail - can be left blank but then you get a blank mail Local $sAttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed Local $sCcAddress = "CCadress1@test.com" ; address for cc - leave blank if not needed Local $sBccAddress = "BCCadress1@test.com" ; address for bcc - leave blank if not needed Local $sImportance = "Normal" ; Send message priority: "High", "Normal", "Low" Local $sUsername = "******" ; username for the account used from where the mail gets sent - REQUIRED Local $sPassword = "********" ; password for the account used from where the mail gets sent - REQUIRED Local $iIPPort = 25 ; port used for sending the mail Local $bSSL = False ; enables/disables secure socket layer sending - set to True if using httpS ; Local $iIPPort = 465 ; GMAIL port used for sending the mail ; Local $bSSL = True ; GMAIL enables/disables secure socket layer sending - set to True if using httpS Local $bIsHTMLBody = False Local $iDSNOptions = $g__cdoDSNDefault Local $rc = _INetSmtpMailCom($sSmtpServer, $sFromName, $sFromAddress, $sToAddress, $sSubject, $sBody, $sAttachFiles, $sCcAddress, $sBccAddress, $sImportance, $sUsername, $sPassword, $iIPPort, $bSSL, $bIsHTMLBody, $iDSNOptions) If @error Then MsgBox(0, "_INetSmtpMailCom(): Error sending message", _ "Error code: " & @error & @CRLF & @CRLF & _ "Error Hex Number: " & _INetSmtpMailCom_ErrHexNumber() & @CRLF & @CRLF & _ "Description: " & _INetSmtpMailCom_ErrDescription() & @CRLF & @CRLF & _ "Description (rc): " & $rc & @CRLF & @CRLF & _ "ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() _ ) ConsoleWrite("### COM Error ! Number: " & _INetSmtpMailCom_ErrHexNumber() & " ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() & " Description:" & _INetSmtpMailCom_ErrDescription() & @LF) EndIf EndFunc ;==>_Example #EndRegion Example Script #Region UDF Functions ; The UDF ; #FUNCTION# ==================================================================================================================== ; Name ..........: _INetSmtpMailCom ; Description ...: ; Syntax ........: _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress[, $s_Subject = ""[, $as_Body = ""[, ; $s_AttachFiles = ""[, $s_CcAddress = ""[, $s_BccAddress = ""[, $s_Importance = "Normal"[, $s_Username = ""[, ; $s_Password = ""[, $IPPort = 25[, $bSSL = False[, $bIsHTMLBody = False[, $iDSNOptions = $g__cdoDSNDefault]]]]]]]]]]]]) ; Parameters ....: $s_SmtpServer - A string value. ; $s_FromName - A string value. ; $s_FromAddress - A string value. ; $s_ToAddress - A string value. ; $s_Subject - [optional] A string value. Default is "". ; $s_Body - [optional] A string value. Default is "". ; $s_AttachFiles - [optional] A string value. Default is "". ; $s_CcAddress - [optional] A string value. Default is "". ; $s_BccAddress - [optional] A string value. Default is "". ; $s_Importance - [optional] A string value. Default is "Normal". ; $s_Username - [optional] A string value. Default is "". ; $s_Password - [optional] A string value. Default is "". ; $IPPort - [optional] An integer value. Default is 25. ; $bSSL - [optional] A binary value. Default is False. ; $bIsHTMLBody - [optional] A binary value. Default is False. ; $iDSNOptions - [optional] An integer value. Default is $g__cdoDSNDefault. ; Return values .: None ; Author ........: Jos ; Modified ......: mLipok ; Remarks .......: ; Related .......: http://www.autoitscript.com/forum/topic/23860-smtp-mailer-that-supports-html-and-attachments/ ; Link ..........: http://www.autoitscript.com/forum/topic/167292-smtp-mailer-udf/ ; Example .......: Yes ; =============================================================================================================================== Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $s_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $bSSL = False, $bIsHTMLBody = False, $iDSNOptions = $g__cdoDSNDefault) ; init Error Handler _INetSmtpMailCom_ErrObjInit() Local $objEmail = ObjCreate("CDO.Message") If Not IsObj($objEmail) Then Return SetError($g__INetSmtpMailCom_ERROR_ObjectCreation, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription()) ; Clear previous Err information _INetSmtpMailCom_ErrHexNumber(0) _INetSmtpMailCom_ErrDescription('') _INetSmtpMailCom_ErrScriptLine('') $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject ; Select whether or not the content is sent as plain text or HTM If $bIsHTMLBody Then $objEmail.Textbody = $s_Body & @CRLF Else $objEmail.HTMLBody = $s_Body EndIf ; Add Attachments If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) If FileExists($S_Files2Attach[$x]) Then ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF) $objEmail.AddAttachment($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) Return SetError($g__INetSmtpMailCom_ERROR_FileNotFound, 0, 0) EndIf Next EndIf ; Set Email Configuration $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = $g__cdoSendUsingPort $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 Then $IPPort = 25 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = $g__cdoBasic $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = $bSSL ;Update Configuration Settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low" EndSwitch ; Set DSN options If $iDSNOptions <> $g__cdoDSNDefault And $iDSNOptions <> $g__cdoDSNNever Then $objEmail.DSNOptions = $iDSNOptions $objEmail.Fields.Item("urn:schemas:mailheader:disposition-notification-to") = $s_FromAddress ;~ $objEmail.Fields.Item("urn:schemas:mailheader:return-receipt-to") = $s_FromAddress EndIf ; Update Importance and Options fields $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then _INetSmtpMailCom_ErrObjCleanUp() Return SetError($g__INetSmtpMailCom_ERROR_Send, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription()) EndIf ; CleanUp $objEmail = "" _INetSmtpMailCom_ErrObjCleanUp() EndFunc ;==>_INetSmtpMailCom ; ; Com Error Handler Func _INetSmtpMailCom_ErrObjInit($bParam = Default) Local Static $oINetSmtpMailCom_Error = Default If $bParam == 'CleanUp' And $oINetSmtpMailCom_Error <> Default Then $oINetSmtpMailCom_Error = '' Return $oINetSmtpMailCom_Error EndIf If $oINetSmtpMailCom_Error = Default Then $oINetSmtpMailCom_Error = ObjEvent("AutoIt.Error", "_INetSmtpMailCom_ErrFunc") EndIf Return $oINetSmtpMailCom_Error EndFunc ;==>_INetSmtpMailCom_ErrObjInit Func _INetSmtpMailCom_ErrObjCleanUp() _INetSmtpMailCom_ErrObjInit('CleanUp') EndFunc ;==>_INetSmtpMailCom_ErrObjCleanUp Func _INetSmtpMailCom_ErrHexNumber($vData = Default) Local Static $vReturn = 0 If $vData <> Default Then $vReturn = $vData Return $vReturn EndFunc ;==>_INetSmtpMailCom_ErrHexNumber Func _INetSmtpMailCom_ErrDescription($sData = Default) Local Static $sReturn = '' If $sData <> Default Then $sReturn = $sData Return $sReturn EndFunc ;==>_INetSmtpMailCom_ErrDescription Func _INetSmtpMailCom_ErrScriptLine($iData = Default) Local Static $iReturn = '' If $iData <> Default Then $iReturn = $iData Return $iReturn EndFunc ;==>_INetSmtpMailCom_ErrScriptLine Func _INetSmtpMailCom_ErrFunc() _INetSmtpMailCom_ErrObjInit() _INetSmtpMailCom_ErrHexNumber(Hex(_INetSmtpMailCom_ErrObjInit().number, 8)) _INetSmtpMailCom_ErrDescription(StringStripWS(_INetSmtpMailCom_ErrObjInit().description, 3)) _INetSmtpMailCom_ErrScriptLine(_INetSmtpMailCom_ErrObjInit().ScriptLine) SetError(1); something to check for when this function returns Return EndFunc ;==>_INetSmtpMailCom_ErrFunc #EndRegion UDF Functions Creating this modification, I had to:
      1. Object Error Handler used only for the duration of the function of Use,
      2. Automatic ErrorHandler CleanUp so that previous ErrorHandler took the job.
      3. Ability to get ErrorNumber and ErrorDescription ErrorScriptLine information even after the end of the function
      4. Elimination of most global variables
       
      mLipok
       
      EDIT: attached SmtpMailer_UDF.au3 file
      EDIT 2: Any comments are welcome.
      EDIT 3: Script CleanUp
      EDIT 4: Download moved to "Download Section" (previously downloaded 379 times)

      EDIT 5: at 2016/01/31 there was many script breaking changes
       
    • mLipok
      By mLipok
      This is modified version of Jos "Smtp Mailer That Supports Html And Attachments"
       
      Support topic is here:
       

       
    • AmarokStudios
      By AmarokStudios
      Hello AutoIt community!
      I have a script that sends and email with attachments when I run the script. This script works perfectly. When I call that script from another script, it sends the email but does not include the attachment. Any idea why this would be happening? Thanks in advance!
×