15 posts in this topic
I'm attempting to create a checklist app that performs other functions. For performance, I would like to check the box, then have the button to the right enabled. After that button is pressed, the second checkbox is enabled, and ready to be checked, allowing the second button to be pressed. After the second button is pressed, the completion/exit button is enabled/shown. I have my code that currently creates the GUI, creates the checkbox, but when you check it it enables the button and the next checkbox. Can't seem to figure out a Case for GUISetOnEvent. Any assistance would be appreciated!
#include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <StaticConstants.au3> #include <EditConstants.au3> #include <MsgBoxConstants.au3> ; Below is the GUI interface _DeploymentProcess() Func _DeploymentProcess() $aStep1 = GUICreate("Deployment Process", 475, 345, 500, 175) $CBcStep1 = GUICtrlCreateCheckbox("1. Step 01.", 15, 25, 300, 25) $BTNS1 = GUICtrlCreateButton("Email 01", 365, 25, 90, 20) $CBcStep2 = GUICtrlCreateCheckbox("2. Step 02.", 15, 50, 300, 25) $BTNS2 = GUICtrlCreateButton("Email 02", 365, 50, 90, 20) GUICtrlSetState($CBcStep2, $GUI_DISABLE) GUICtrlSetState($BTNS1, $GUI_DISABLE) $CBcStep3 = GUICtrlCreateButton("Hurray! You're Complete!", 85, 276, 300, 60) GUICtrlSetState($CBcStep3, $GUI_SHOW) ; Below are the button and checkbox enables/disables. GUISetState(@SW_SHOW) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE GUIDelete($aStep1) Return ; Step 1 Case $CBcStep1 If GUICtrlRead($CBcStep1) = $GUI_CHECKED Then GUICtrlSetState($BTNS1, $GUI_ENABLE) GUICtrlSetState($CBcStep2, $GUI_ENABLE) Else GUICtrlSetState($BTNS1, $GUI_DISABLE) GUICtrlSetState($CBcStep2, $GUI_DISABLE) EndIf ; Step 2 Case $CBcStep2 If GUICtrlRead($CBcStep2) = $GUI_CHECKED Then GUICtrlSetState($BTNS2, $GUI_ENABLE) GUICtrlSetState($CBcStep3, $GUI_ENABLE) Else GUICtrlSetState($BTNS2, $GUI_DISABLE) GUICtrlSetState($CBcStep3, $GUI_DISABLE) EndIf Case $CBcStep3 If GUICtrlRead($CBcStep2) = $GUI_CHECKED Then GUICtrlSetState($BTNS10, $GUI_ENABLE) GUICtrlSetState($CBcStep3, $GUI_SHOW) Else GUICtrlSetState($CBcStep3, $GUI_EVENT_CLOSE) EndIf Case $GUI_EVENT_CLOSE, $CBcStep3 #comments-end Exit EndSwitch WEnd EndFunc
Hello all ~
I am running an autoit script on Windows 10 inside VMware Workstation 12 Pro version 12.5.2. Technically I am remoting into ESXi which has a Domain Controller (DC), WebServer, FilServer, Windows 10, etc. Using the GUI (i.e. running explorer.exe) I am able to open several different folders successfully. The desktop, documents, USB external all open without issue. The network share opening gives me issues. Whenever I attempt to open \\filserver\users\user\sharedfolder I get the documents folder instead. I understand that the documents folder is the default for explorer. I have also attempted to use the letter drive mapped to the network share (Z:) and receive the same result. When I run this script on Windows 10 alone without the VM or the ESXi I am able to open the network share without problems. I have tried to use the net use command to designate a letter M: to the network share folder prior to running the script. This did not work for me.
One additional avenue I think might work is to use the systreeview321 and _GUICtrlTreeView_FindItem to step through the tree looking for the network share. Once found, double click on it and see if that opens the shared network folder. I can click inside the VM with my mouse on the network share and it opens just fine. Not sure if running up against GUI issues, or permission issues, or what?
Thanks in advance,
This script is a subset of a much larger program, but it illustrates what I am dealing with.
GUICtrlSetState Function example ，i found $GUI_DROPACCEPTED isn't working in windows10 x64（windows_10_enterprise_2016_ltsb_x64）.
if the example put to windows10 x86 or windows xp, the $GUI_DROPACCEPTED is effective，
the AutoIt Edition is v184.108.40.206.
any ideas? thanks you.
#include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> Example() Func Example() ; Create a GUI with various controls. Local $hGUI = GUICreate("Example", 420, 200, -1, -1, -1, $WS_EX_ACCEPTFILES) ; Create a label and set the state as drop accepted. Local $idLabel = GUICtrlCreateLabel("Drop a file on this label.", 10, 10, 400, 40, $WS_BORDER) GUICtrlSetState($idLabel, $GUI_DROPACCEPTED) ; Create an input and set the state as drop accepted. Local $idInput = GUICtrlCreateInput("", 10, 60, 400, 22) GUICtrlSetState($idInput, $GUI_DROPACCEPTED) Local $idOK = GUICtrlCreateButton("OK", 310, 170, 85, 25) ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE, $idOK ExitLoop Case $GUI_EVENT_DROPPED ; If the value of @GUI_DropId is $idLabel, then set the label of the dragged file. If @GUI_DropId = $idLabel Then GUICtrlSetData($idLabel, @GUI_DragFile) EndSwitch WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc ;==>Example
So, the functions work, where primarygui() accurately determines the evaluation of the status of the checkboxes - the msgbox picks this up.
However, later on, when we re-enter a 'for $i = 0 to ubound($checkbox)' loop, then in the 'batchinitial' function it doesn't picked up that the status&$i = 1, so it jumps out, then within the While 1 loop, it exits the loop in the first row, again because the status& $i= 0
The "assign" line within the primarygui funtion, is this only a local assignment? if so, how can I make it cross function?
Thank in adv for your help
Func excelsheetlist() $i = 0 Global $aWorkSheets = _Excel_SheetList($oWorkbook1) If @error Then Exit MsgBox($MB_SYSTEMMODAL, "Excel UDF: _Excel_SheetList Example 1", "Error listing Worksheets." & @CRLF & "@error = " & @error & ", @extended = " & @extended) ;_ArrayDisplay($aWorkSheets, "Excel UDF: _Excel_SheetList Example 1") ;_ArrayDisplay($aWorkSheets, "Array") Global $iRows = UBound($aWorkSheets, $UBOUND_ROWS) ; Total number of rows. In this example it will be 10. Global $iCols = UBound($aWorkSheets, $UBOUND_COLUMNS) ; Total number of columns. In this example it will be 20. Global $iDimension = UBound($aWorkSheets, $UBOUND_DIMENSIONS) ; The dimension of the array e.g. 1/2/3 dimensional. MsgBox($MB_SYSTEMMODAL, "", "The array is a " & $iDimension & " dimensional array with " & _ $iRows & " row(s) & " & $iCols & " column(s).") Dim $checkbox[$iRows] EndFunc ;==>excelsheetlist Func primarygui() ; Create a GUI with various controls. Local $hGUI = GUICreate("Script Controller", 300, ($iRows * 24)) ; Create a checkbox control. ;Local $idCheckbox = GUICtrlCreateCheckbox("Standard Checkbox", 10, 10, 185, 25) Local $Button2 = GUICtrlCreateButton("Close", 210, 200, 85, 25) Local $Button3 = GUICtrlCreateButton("Run", 210, 170, 85, 25) Local $Button1 = GUICtrlCreateButton("Discharge", 210, 140, 85, 25) For $i = 0 To UBound($checkbox) - 1 $checkbox[$i] = GUICtrlCreateCheckbox($aWorkSheets[$i], 8, 0 + ($i * 24)) ;, 81, 17) Next ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) ; Loop until the user exits. While 1 $nMsg = GUIGetMsg() Select Case $nMsg = $GUI_EVENT_CLOSE Exit Case $nMsg = $Button2 ;Close Exit Case $nMsg = $Button1 MsgBox(0, "Discharge Button not configured", "Now Exiting") Exit Case $nMsg = $Button3 ;Run $fSelection = False For $i = 0 To UBound($checkbox) - 1 If BitAND(GUICtrlRead($checkbox[$i]), $GUI_CHECKED) Then $fSelection = True ExitLoop EndIf Next If $fSelection Then For $i = 0 To UBound($checkbox) - 1 Assign("status" & $i, GUICtrlRead($checkbox[$i])) Next $batchcount = 0 For $i = 0 To UBound($checkbox) - 1 If Eval("status" & $i) = 1 Then $batchcount = $batchcount + 1 ;Call ("o" & $i & "copy") ; if you want to call the functions directly, remove ; before the call and comment or delete the following DirCopy statement MsgBox(0, "Checking", "Checking that: " & $checkbox[$i] & " no, with title: " & $aWorkSheets[$i] & " was selected, Batch count: " & $batchcount) ; if you need only the DirCopy EndIf Next ExitLoop Else MsgBox(48, 'No Items Selected', 'You have not selected any Patients to Load, Please select from the list') EndIf EndSelect WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc ;==>primarygui Func _IsChecked($idControlID) Return BitAND(GUICtrlRead($idControlID), $GUI_CHECKED) = $GUI_CHECKED EndFunc ;==>_IsChecked Func batchinitial() If Eval("status" & $i) = 1 Then debugbox() $oWorkbook1.Sheets(1).Activate $bigloop = $bigloop + 1 $sheet = $aWorkSheets[$i] $oWorkbook1.Sheets($sheet).Activate debugbox() EndIf EndFunc ;==>batchinitial OpenExcel() excelsheetlist() primarygui() For $i = 0 To UBound($checkbox) - 1 batchinitial() While 1 If Eval("status" & $i) = 0 Then ExitLoop ;all the rest of my script loops etc WEnd Next
Hello everyone !
While writing a sample of code to test ping to my internet box, I got stuck..
While the code is Pinging with let say.. 5000ms of timeout, I need to update a progress bar from 0 to 5000 ms at the same time but I don't know how could I do this..
Is there a way or something that could get around the pause of the ping like in InetGet -> InetGetInfo?