Jump to content
Sign in to follow this  
meows

XSkin_Fully_Loaded error: missing separator

Recommended Posts

meows

I just dnloaded the new version 03:39:08 unziped Xskin and went to make some buttons and message boxes, and was very supprised by all the errors I got,

>Running AU3Check (3.3.12.0)  from:C:\Program Files\AutoIt3  input:C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3
"C:\Program Files\AutoIt3\Include\XSkin.au3"(144,58) : error: missing separator character before keyword.
                If IsArray($XS_msg) And $XS_msg[4] == $CtrlIDA[$XS_x]Then
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\Include\XSkin.au3"(164,38) : error: missing separator character before keyword.
                    If $XSkinID[$XS_s] == $XS_msg[4]Then
                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\Include\XSkin.au3"(168,40) : error: missing separator character before keyword.
                            If $XS_msg[4] <> $XSkinID[$XS_s]Then
                            ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\Include\XSkin.au3"(324,58) : error: missing separator character before keyword.
            If IsArray($XS_msg) And $XS_msg[4] == $CtrlIDMA[$XS_x]Then
            ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\Include\XSkin.au3"(376,15) : error: missing separator character before keyword.
    If $XS_ret[0]Then
    ~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3"(17,11) : error: Statement cannot be just an expression.
    XSkin MsgBox
~~~~~~~~~~^
"C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3"(17,46) : error: MsgBox() [built-in] called with wrong number of args.
    XSkin MsgBox( "Ok Cancel Dialog", "Hello")
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3"(17,11) : error: XSkin(): undefined function.
    XSkin MsgBox
~~~~~~~~~~^
C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3 - 8 error(s), 0 warning(s)
!>03:39:08 AU3Check ended. Press F4 to jump to next error.rc:2
+>03:39:08 AutoIt3Wrapper Finished.
>Exit code: 2    Time: 0.3946

I do not know where to start to get XSkin to work and play with this version of AutoIt. Or is there another tool I should be using?

Share this post


Link to post
Share on other sites
BrewManNH

Run Tidy on the source script for Xskin.au3. It appears to be missing several  spaces that are needed.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
meows

Run Tidy on the source script for Xskin.au3. It appears to be missing several  spaces that are needed.

That did the trick. Many thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • UEZ
      By UEZ
      Following script shows a parent GUI with a child GUI initialized as MDICHILD.
      #include <Constants.au3> #include <GUIConstantsEx.au3> #include <GuiReBar.au3> #include <GuiScrollBars.au3> #include <GuiToolbar.au3> #include <ScreenCapture.au3> #include <ScrollBarConstants.au3> #include <WindowsConstants.au3> _GDIPlus_Startup() Global Enum $idNew = 1000, $idOpen, $idSave, $idHelper Global Const $iImageW = @DesktopWidth, $iImageH = @DesktopHeight Global Const $hBMP_ScreenCapture = _ScreenCapture_Capture("", 0, 0, $iImageW, $iImageH, False) Global Const $hBitmap = _GDIPlus_BitmapCreateFromHBITMAP($hBMP_ScreenCapture) Sleep(50) Global Const $iW = 1500, $iH = 700, $SC_DRAGMOVE = 0xF012 Global Const $hGUI = GUICreate("Move child GUI within GUI", $iW, $iH) Global Const $hToolbar = _GUICtrlToolbar_Create($hGUI) Global Const $hReBar = _GUICtrlRebar_Create($hGUI, BitOR($CCS_TOP, $RBS_VARHEIGHT, $RBS_AUTOSIZE, $RBS_BANDBORDERS)) Global Const $height_delta = 37 Global Const $idPic = GUICtrlCreatePic("", 0, $height_delta + 2, $iW, $iH) Global $hBitmap_tmp, $hHBitmap_tmp $hBitmap_tmp = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Global $hGfx_Context = _GDIPlus_ImageGetGraphicsContext($hBitmap_tmp) _GUICtrlToolbar_AddBitmap($hToolbar, 1, -1, $IDB_STD_LARGE_COLOR) _GUICtrlToolbar_AddButton($hToolbar, $idNew, $STD_FILENEW) _GUICtrlToolbar_AddButton($hToolbar, $idOpen, $STD_FILEOPEN) _GUICtrlToolbar_AddButton($hToolbar, $idSave, $STD_FILESAVE) _GUICtrlToolbar_AddButtonSep($hToolbar) _GUICtrlToolbar_AddButton($hToolbar, $idHelper, $STD_HELP) _GUICtrlRebar_AddToolBarBand($hReBar, $hToolbar, "", 0) Global Const $iVSscroll = _WinAPI_GetSystemMetrics(2) Global Const $iHSscroll = _WinAPI_GetSystemMetrics(3) Global Const $iYCaption = _WinAPI_GetSystemMetrics(4) Global Const $iYFixedFrame = _WinAPI_GetSystemMetrics(8) Global Const $iXFixedFrame = _WinAPI_GetSystemMetrics(7) Global Const $iMetricsSumX = $iVSscroll + $iXFixedFrame * 2 Global Const $iMetricsSumY = $iHSscroll + $iYCaption + $iYFixedFrame _GUIScrollBars_Init($hGUI) _GUIScrollBars_SetScrollInfoMin($hGUI, $SB_HORZ, 0) _GUIScrollBars_SetScrollInfoMax($hGUI, $SB_HORZ, $iImageW - $iW + 61 + $iMetricsSumX) _GUIScrollBars_SetScrollInfoMin($hGUI, $SB_VERT, 0) _GUIScrollBars_SetScrollInfoMax($hGUI, $SB_VERT, $iImageH - $iH + $iMetricsSumY + $height_delta - 1) GUISetState(@SW_SHOW, $hGUI) Global Const $STM_SETIMAGE = 0x0172 _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hBMP_ScreenCapture)) Global $IE_offset_x = 0, $IE_offset_y = 0 DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) GUIRegisterMsg($WM_HSCROLL, "WM_HSCROLL_IE") GUIRegisterMsg($WM_VSCROLL, "WM_VSCROLL_IE") Global $iPosX_Crop = 0, $iPosY_Crop = 0, $iW_crop = 200, $iH_crop = 200, $bMove_Crop = True Global $hGUI_IE_Crop = GUICreate("", $iW_crop, $iH_crop, $iPosX_Crop, $iPosY_Crop) GUISetStyle(BitOR($WS_BORDER, $WS_POPUP), $WS_EX_MDICHILD) _WinAPI_SetParent($hGUI_IE_Crop, $hGUI) WinSetTrans($hGUI_IE_Crop, "", 0xA0) Global $iLable_CropMove = GUICtrlCreateLabel("", 0, 0, $iW_crop, $iH_crop, -1, $GUI_WS_EX_PARENTDRAG) GUISetState(@SW_SHOW, $hGUI_IE_Crop) GUIRegisterMsg($WM_MOVE, "WM_MOVE_IE_GUI_Crop") ;~ GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN") Do Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch Until False GUIRegisterMsg($WM_HSCROLL, "") GUIRegisterMsg($WM_VSCROLL, "") GUIRegisterMsg($WM_MOVE, "") GUIRegisterMsg($WM_LBUTTONDOWN, "") _WinAPI_DeleteObject($hBMP_ScreenCapture) _GDIPlus_BitmapDispose($hBitmap_tmp) _GDIPlus_BitmapDispose($hBitmap) _GDIPlus_GraphicsDispose($hGfx_Context) _GDIPlus_Shutdown() Exit Func WM_HSCROLL_IE($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $Min, $Max, $Page, $TrackPos ; Get all the horizontal scroll bar information Local $tSCROLLINFO_X = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_HORZ) $Min = DllStructGetData($tSCROLLINFO_X, "nMin") $Max = DllStructGetData($tSCROLLINFO_X, "nMax") $Page = DllStructGetData($tSCROLLINFO_X, "nPage") ; Save the position for comparison later on $IE_offset_x = DllStructGetData($tSCROLLINFO_X, "nPos") $TrackPos = DllStructGetData($tSCROLLINFO_X, "nTrackPos") #forceref $Min, $Max Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Switch $nScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x - $Page) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $TrackPos) EndSwitch DllStructSetData($tSCROLLINFO_X, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO_X) $IE_offset_x = DllStructGetData($tSCROLLINFO_X, "nPos") DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) $hHBitmap_tmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap_tmp) _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap_tmp)) _WinAPI_DeleteObject($hHBitmap_tmp) $bMove_Crop = False ConsoleWrite($iPosX_Crop & ", " & $iPosY_Crop & " / " & $IE_offset_x & ", " & $IE_offset_y & @CRLF) WinMove($hGUI_IE_Crop, "", -$IE_offset_x + $iPosX_Crop, -$IE_offset_y + $iPosY_Crop) ;~ DllCall("user32.dll", "bool", "MoveWindow", "hwnd", $hGUI_IE_Crop, "int", -$IE_offset_x + $iPosX_Crop, "int", -$IE_offset_y + $iPosY_Crop, "int", $iW_crop, "int", $iH_crop, "bool", True) $bMove_Crop = True Return "GUI_RUNDEFMSG" EndFunc ;==>WM_HSCROLL_IE Func WM_VSCROLL_IE($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $Min, $Max, $Page, $TrackPos ;~ ; Get all the horizontal scroll bar information Local $tSCROLLINFO_Y = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO_Y, "nMin") $Max = DllStructGetData($tSCROLLINFO_Y, "nMax") $Page = DllStructGetData($tSCROLLINFO_Y, "nPage") ; Save the position for comparison later on $IE_offset_y = DllStructGetData($tSCROLLINFO_Y, "nPos") $TrackPos = DllStructGetData($tSCROLLINFO_Y, "nTrackPos") #forceref $Min, $Max Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Switch $nScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y - $Page) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $TrackPos) EndSwitch DllStructSetData($tSCROLLINFO_Y, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO_Y) $IE_offset_y = DllStructGetData($tSCROLLINFO_Y, "nPos") DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) $bMove_Crop = False ConsoleWrite($iPosX_Crop & ", " & $iPosY_Crop & " / " & $IE_offset_x & ", " & $IE_offset_y & @CRLF) WinMove($hGUI_IE_Crop, "", -$IE_offset_x + $iPosX_Crop, -$IE_offset_y + $iPosY_Crop) ;~ DllCall("user32.dll", "bool", "MoveWindow", "hwnd", $hGUI_IE_Crop, "int", -$IE_offset_x + $iPosX_Crop, "int", -$IE_offset_y + $iPosY_Crop, "int", $iW_crop, "int", $iH_crop, "bool", True) $bMove_Crop = True Return "GUI_RUNDEFMSG" EndFunc ;==>WM_VSCROLL_IE Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam) _SendMessage($hGUI_IE_Crop, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndFunc ;==>_WM_LBUTTONDOWN Func WM_MOVE_IE_GUI_Crop($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam If $hWnd = $hGUI_IE_Crop And $bMove_Crop Then $iPosX_Crop = _WinAPI_LoWord($lParam) $iPosY_Crop = _WinAPI_HiWord($lParam) EndIf Return "GUI_RUNDEFMSG" EndFunc ;==>WM_MOVE_IE_GUI_Crop Func WM_SIZE_IE_GUI_Crop($hWnd, $iMsg, $wParam, $lParam) Return $GUI_RUNDEFMSG EndFunc ;==>WM_SIZE_IE_GUI_Crop Func DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) _GDIPlus_GraphicsDrawImageRectRect($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH, 0, 0, $iW, $iH) $hHBitmap_tmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap_tmp) _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap_tmp)) _WinAPI_DeleteObject($hHBitmap_tmp) EndFunc  
      My problem: if you move the child window at left upper corner to another place and move either H or V scrollbar the child GUI will be moved properly. BUT if you have scrolled the scrollbars to the right bottom of the image and move the child GUI to that corner, too then the child GUI jumps if you click on one of the scrollbars.
      Is there something that I didn't consider?
    • Ackerz
      By Ackerz
      Hi guys,
      So I am trying to automate a task and this task has an input box with an already set character "9". 
      I have just decided that I don't really need the input as an option but it's good to leave however for this instance I would like it to run past this point automatically. I've tried numerous ways to try and automate the use of the "OK" button using ControlClick and various other options. I just can't seem to see where this point in the script is. Scoured the forums for anything similar but didn't have any luck finding anything. Sorry to be a pain and I hope someone can help, if I haven't explained in enough detail please don't hesitate to ask for more.
      Many thanks,
      Ackerz
       
      Local $len Local $n Local $buff Local $aMyDate $Len = InputBox("Test",$msgPrompt,"9") $len = StringStripWS($len,$STR_STRIPALL) ;Check that user has entered a vaild password length if not StringIsDigit($len) or $len = 0 Then MsgBox(48,"Error","Invaild Integer was entered" & @CRLF & "Program will now exit.") Exit EndIf ;This creates the random password. for $i = 1 to $Len ;Pick a random char between 1 and the pwsMask Length $n = int(random(1,StringLen($pwsMask))) ;Concat each char that has been picked out of pwsMask to $buff $buff = $Buff & StringMid($pwsmask,$n,1) Next  
    • Emmhor1
      By Emmhor1
      Hi All,

      MAIN QUESTION:
      Is it possible to Call specific function within a GUI

      So I have a script with multiple functions although I don't want to use every function every time.
      My Idea is to create a simple GUI which allows me to select what functions I want to use then run the funtions by clicking a button.
      I have already made a GUI which allows me to select specific .exe's I would like to run after selection it runs the .exe one by one.
      This script is on my work laptops and cannot access it right now.
       
      Who can help me with this?
      GUIcreate
      Func1 
      Func2
      Func3
      Then have a boxes which allows me to select the specif Func.(I used GUIChecked and Unchecked in my other script)
      Then a button which executes/calls the selected functions
    • Blois
      By Blois
      Hi Guis,
       
      I need to create keyboard shortcut to navigate the tabs and activate them, but I could not use the code below:
      #include <TabConstants.au3> #include <WindowsConstants.au3> #include <GuiTab.au3> #include <GUIConstantsEx.au3> HotKeySet("^{TAB}", "_TabRight") HotKeySet("^+{TAB}", "_TabLeft") $gui = GUICreate("test",450, 300) $Tab1 = GUICtrlCreateTab(20, 24, 425, 201) $TabSheet1 = GUICtrlCreateTabItem("Tabsheet 1") $lbContagemGrupos2 = GUICtrlCreateLabel("aaaa", 50, 50) GUICtrlSetColor(-1, 0x0000FF) GUICtrlCreateTabItem("") $TabSheet2 = GUICtrlCreateTabItem(" ") $TabSheet3 = GUICtrlCreateTabItem(" ") GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd Func _TabRight() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos + 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Func _TabLeft() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos - 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Exit  
      can you help me?
    • Pricehacker
      By Pricehacker
      Hello again!
      I have tried searching for quite some time now but couldn´t find a single working way to change the class of your GUI that doesn´t include changing it manually after its compilation.
      First or "AutoIt v3 GUI" is a pretty boring name tbh and i would like to spice it up a bit, also, and more importantly, I would like to identify my windows by something other than its title as it will change depending on some factors and im using two different programs independently as multi threading isn't supported.
      Any help is appreciated! Thank you!
×