Jump to content
IDU

Shift key stuck plz help me!

Recommended Posts

IDU

I’m using autoit3 for make keyrep software, it look like if “s” key pressed after “a” then Unicode send 0241.

I’m done everything ok, but only one thing gone error the shift key. In holding down the shift key first send uppercase but secondly it send lower case. Can anyone fix this? I already done

Send("{SHIFTDOWN}{SHIFTUP}") but it doesn’t work for me. My code is (limited edition)

Opt("SendCapslockMode", 0)
Global $hotkeynum
SelectKey();firstly runing func
Func SelectKey()
   While True
      HotKeySet("{a}","sima")
      HotKeySet("{A}","capA")
      HotKeySet("{s}","sims")
      HotKeySet("{S}","capS")
      Sleep(50)
   WEnd
EndFunc
;~ DesableFunction//////////////
Func desableallkey()
   HotKeySet("{a}")
   HotKeySet("{A}")
   HotKeySet("{s}")
   HotKeySet("{S}")
EndFunc
;~ End Main Function//////////////////////////////////////////////////////
;~ Main Function Calling Functions////////////////////////////////////////
func sima()
      $hotkeynum = 1
      desableallkey()
      Send("a")
      SelectKey()
EndFunc
func capA()
      $hotkeynum = 1
      desableallkey()
      Send("A")
      SelectKey()
EndFunc
func sims()
   If $hotkeynum = 0  Then
      desableallkey()
      Send("{BS}{ASC 0241}"); 0241 =ñ ,0242=ò
   Else
      desableallkey()
      Send("{BS}{ASC 0242}")
      EndIf
      SelectKey()
EndFunc
func capS()
   If $hotkeynum = 0  Then
      desableallkey()
      Send("{BS}{ASC 0242}")
   Else
      desableallkey()
      Send("{BS}{ASC 0241}")
      EndIf
      SelectKey()
EndFunc

 

 

test - key.au3

Edited by IDU
text missing

Share this post


Link to post
Share on other sites
reb

check the help file for send.

especially this part

"To hold a key down
    Send("{a down}") ;Holds the A key down
    Send("{a up}") ;Releases the A key"

send(" {ENTER up}") might do.

your link test - Copy - Copy.au3

is not working for me so this is just a guess.

good luck

 

Edited by reb
  • Like 1

MEASURE TWICE - CUT ONCE

Share this post


Link to post
Share on other sites
IDU

thanks reb for reply me.

but its not what i looking for. now my link is work, you can check it for revise my code.

Share this post


Link to post
Share on other sites
Jos

You code is flawed as it never returns from any functions and your while loop is setting the hotkeys constandly.

As this remark from the Helpfile is important:

It is recommended to use lower-case keys/characters (e.g. "b" and not "B") when setting hotkeys to avoid errors as with some keyboard layouts upper and lower case keys may be mapped differently.

Jos

 

ps: Posting in this support forum implies you need help so no need to put that in the title!

Edited by Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
IDU

You code is flawed as it never returns from any functions and your while loop is setting the hotkeys constandly.

As this remark from the Helpfile is important:

Jos

 

ps: Posting in this support forum implies you need help so no need to put that in the title!

Thanks jos for replying.

Firstly I’ll remove “plz help me!” from my next topic.

Secondly you said that hot keys are constandly, but they aren’t constandly. 

There is a function to disable hot keys (desableallkey()). 

But it is true that never return from function. 

But it not necessary to return from loops and there was a code to detect upper and lower case.

( Opt"SendCapslockMode", 0)

 

Edited by IDU

Share this post


Link to post
Share on other sites
jchd

You need to carefully reread what Jos told you.


This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • ufukreis1212
      By ufukreis1212
      Hello, I am new members. Help me please. I want vbs convert to au3 .
      This vbs code : 
      'deneme Set SystemSet = GetObject("winmgmts:").InstancesOf ("Win32_OperatingSystem") strOSArch = GetObject("winmgmts:root\cimv2:Win32_OperatingSystem=@").OSArchitecture Set objNetwork = CreateObject("Wscript.Network") Set wshShell = CreateObject( "WScript.Shell" ) strComputerName = wshShell.ExpandEnvironmentStrings( "%COMPUTERNAME%" ) Set oShell = WScript.CreateObject("WScript.Shell") proc_arch = oShell.ExpandEnvironmentStrings("%PROCESSOR_ARCHITECTURE%") Set oEnv = oShell.Environment("SYSTEM") strComputer = "." Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2") Set colMB = objWMIService.ExecQuery("Select * from Win32_BaseBoard") Set colCSes = objWMIService.ExecQuery("SELECT * FROM Win32_ComputerSystem") Set colProcessors = objWMIService.ExecQuery("Select * from Win32_Processor") Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2") Set colItemsx = objWMIService.ExecQuery( _ "SELECT * FROM Win32_VideoController",,48) '------------------------------------------------------------------- Set obj = GetObject("winmgmts:").InstancesOf("Win32_PhysicalMemory") i = 1 For Each obj2 In obj memTmp1 = obj2.capacity / 1024 / 1024 TotalRam = TotalRam + memTmp1 i = i +1 Next '-------------------------------------------------------------------- Dim objWMIService : Set objWMIService = GetObject("winmgmts:\\.\root\cimv2") Set colItems = objWMIService.ExecQuery("Select Architecture from Win32_Processor") For Each objItem in colItems if objItem.Architecture = 0 then strArchitecture = "x86" end if if objItem.Architecture = 9 then strArchitecture = "x64" end if next '-------------------------------------------------------------------- strComputer = "." ' Local computer strMemory = "" i = 1 set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2") set colItems = objWMIService.ExecQuery("Select * from Win32_PhysicalMemory") For Each objItem In colItems if strMemory <> "" then strMemory = strMemory & vbcrlf strMemory = strMemory & "Bank" & i & " : " & (objItem.Capacity /1024 /1024) & " Mb" i = i + 1 Next installedModules = i - 1 Set colItems = objWMIService.ExecQuery("Select * from Win32_PhysicalMemoryArray") For Each objItem in colItems totalSlots = objItem.MemoryDevices Next '---------------------------------------------------------------------- Set objWMISvc = GetObject( "winmgmts:\\.\root\cimv2" ) Set colItems = objWMISvc.ExecQuery( "Select * from Win32_ComputerSystem" ) For Each objItem in colItems strComputerDomain = objItem.Domain Next for each System in SystemSet For Each objItem in colItemsx For Each objProcessor in colProcessors For Each bbType In colMB MbVendor = bbType.Manufacturer MbModel = bbType.Product MsgBox "İşletim Sistemi : " & System.Caption & vbNewLine & _ "İşletim Sistemi Versionu : " & + System.Version & vbNewLine & _ "Windows Mimari Yapısı: " & strOSArch & vbNewLine & _ "Kullanıcı isminiz: " & objNetwork.UserName & vbNewLine & _ "Bilgisayar ismi: " & strComputerName & vbNewLine & _ "Çalışma Grubu: " & strComputerDomain & vbNewLine & _ "--------------------------------------" & vbNewLine & _ "Anakart: " & MbVendor & " " & "[" & MbModel & "]" & vbNewLine & _ "--------------------------------------" & vbNewLine & _ "Grafik Kartı: " & objItem.Caption & vbNewLine & _ "Driver Version: " & objItem.DriverVersion & vbNewLine & _ "--------------------------------------" & vbNewLine & _ "İşlemci Üreticisi: " & objProcessor.Manufacturer & vbNewLine & _ "İşlemci İsmi: " & objProcessor.Name & vbNewLine & _ "CPU Mimarisi: " & strArchitecture & vbNewLine & _ "İşlemci Çekirdek sayısı: " & oEnv("NUMBER_OF_PROCESSORS") & vbNewLine & _ "--------------------------------------" & vbNewLine & _ "Toplam RAM: " & TotalRam & " MB" & vbNewLine & _ "Toplam Slot: " & totalSlots & vbNewLine & _ "Boş Slot: " & (totalSlots - installedModules) & vbNewLine & _ "Ramlerin bulunduğu slotlar:" & vbcrlf & strMemory,0,"deneme" Next Next Next Next please help me , thanks.
    • JuanFelipe
      By JuanFelipe
       
      Hello friends, I have a query, it happens that I have a matrix nxn, the first column of this contains each cell a number with 21 digits, when I pass this matrix to Excel I obviously write that number as 1,10016E + 20, I solved it by adding a * at the end of each cell, but I want it to be written as a text so that I do not have to remove that *, I searched in Google but could not find an effective solution, thanks in advance. 
    • Puls3
      By Puls3
      Hi, This is my first post on the AutoIt Forums, I most of the time was able to get help from this community by merely searching though google and have been able to solve hundreds of problems this way, though in this case I was incapable of finding a solution to my problem. I am quite confident that it is a user error (And my fault) but I haven't been able to determine what I did wrong, any and all help would be greatly appreciated! I have uploaded my whole script pardon passwords to provide as much information as possible.
      I declared a global array at the top of the script and am having issues when I try to set it's value, and I fail to understand why.
      Error Message:
      "D:\Projects\AutoIt\Arena\Base.au3" (270) : ==> Subscript used on non-accessible variable.:
      $ExpMax[$i] = IniRead($TempSavePath, "Combatant" & $i, "ExpMax", $ExpMax[0])
      $ExpMax^ ERROR
      ConsoleWrite Log:
      Ran.
      Checking launch parameters.
      No launch parameters.
      Initiating load.
      Checking for save file.
      Save file not found.
      Load canceled.
      Loading or creating Combatant 1
      Base.au3
    • RamDemon
      By RamDemon
      Hi,
      Did anyone tried to  use Redis  with AutoIT as store DB ?
       Redis <-- more about it
      Mladen
    • nooneclose
      By nooneclose
      Hey. I'm working on a new project and was wondering if there is a better way to "update" my Column E array. 
      Here is my code: 
      Local $nI  = 0                                                            ;Creates a name index of 0: nI = Name index Local $nII = 1                                                            ;Creates a name index of 1 for second loop: nII = Name Index 2 For    $iN = 0 To $IndexRows Step 1                                       ;Checks the roster for any names that appear twice      For $iN2 = 0 To $IndexRows Step 1          if $d_Names[$nI] == $d_Names[$nII] And $d_Names[$nII] <> "" Then              Local $timeSheetName = _ArraySearch($e_Names, $d_Names[$nI], 0, 0, 0, 0, 1)              ;MsgBox($MB_SYSTEMMODAL, "Found it", $d_Names[$nI] & " In column E on Row " & $timeSheetName)              Local $eI  = $timeSheetName + 1              ;ConsoleWrite($timeSheetName & @CRLF)              ;ConsoleWrite($eI & @CRLF)              ;ConsoleWrite(@CRLF)              _Excel_RangeInsert($OpenWorkbook.ActiveSheet, "E" & $eI & ":F" & $eI, $xlShiftDown)                                                                          ;Inserts a empty cell in columns E and F.              _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $d_Names[$nII], "E" & $eI)                                                                         ;Fills the empty cell in columns E with the doubled name              $aArray_Index = 2                                           ;Array element counter              For $Index = 2 To $IndexRows Step 1                        ;Loops through every row in the Excel file unto no rows are found or a null row is found                  $Array_Value_E = _Excel_RangeRead($OpenWorkbook, Default, "E"&$Index)                  $e_names[$aArray_Index] = $Array_Value_E                ;While the code loops every value in column E is stored in the E array (updating the array)                  $aArray_Index += 1              Next              ExitLoop          EndIf      Next      $nI  += 1      $nII += 1 Next Basically, It checks a roster for people whose name appears twice then inserts a new "row" for that person because they work in two different departments.
      I have to find that name however in Column E if two appear in column D. My code works but I think it is not as efficient as it could be. 
      Any ideas on how to improve the "update" for my array?
      (once it finds the double names in Column D it then searches for that name by going name by name in the Column E array and once it finds it inserts a new row. However, the E array doesn't have that new row stored in it so I have to "update" the array to properly find the next name)
      Any and all tips would be greatly appreciated. 
       
      NOTE: Just assume I'm opening the excel file properly please do not add that code in, it only complicates your answer. 
×