Jump to content
Sign in to follow this  
Eggsplorer

Installing Chocolatey via AutoIt

Recommended Posts

Hi,

I want to install chocolatey (https://chocolatey.org/) with AutoIt.

I just need to send the following command to cmd:

@powershell -NoProfile -ExecutionPolicy unrestricted -Command "(iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))) >$null 2>&1" && SET PATH=%PATH%;%ALLUSERSPROFILE%\chocolatey\bin

This is what I tried:

RunWait(@ComSpec & " /C " "@powershell -NoProfile -ExecutionPolicy unrestricted -Command "(iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))) >$null 2>&1" && SET PATH=%PATH%;%ALLUSERSPROFILE%\chocolatey\bin", "");

It didn't work propably because of the quotes.

So I tried this:

$code1 = "@powershell -NoProfile -ExecutionPolicy unrestricted -Command"
$code2 = " (iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))) >$null 2>&1"
$code3 = " && SET PATH=%PATH%;%ALLUSERSPROFILE%\chocolatey\bin"

RunWait(@ComSpec & " /C " & $code1 & $code2 & $code3, "");

Didn't work either.

Any help?

Thanks in advance =)

Edited by Eggsplorer

Share this post


Link to post
Share on other sites

Or you could just change the /C to /K so the window stays open. That way you can see what the command window is returning.

Alternatively, write your Run code to the console to ensure it matches up as you would expect, like this:

$code1 = "@powershell -NoProfile -ExecutionPolicy unrestricted -Command"
$code2 = " (iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))) >$null 2>&1"
$code3 = " && SET PATH=%PATH%;%ALLUSERSPROFILE%\chocolatey\bin"

ConsoleWrite(@ComSpec & " /C " & $code1 & $code2 & $code3 & @CRLF)
;RunWait(@ComSpec & " /C " & $code1 & $code2 & $code3, "");

If it looks as you would expect, copy it from the AutoIt console window and paste into a command line, see what you get

Edited by JLogan3o13

"Profanity is the last vestige of the feeble mind. For the man who cannot express himself forcibly through intellect must do so through shock and awe" - Spencer W. Kimball

How to get your question answered on this forum!

Share this post


Link to post
Share on other sites

Thanks a lot.
 I used a .bat-File but without the FileInstall.
My .bat-File is located on a server but accessing with RunWait() worked withoput problems.

Is FileInstall reccommended to avoid warning messages?

Share this post


Link to post
Share on other sites

FileInstall actually includes the file inside the compiled .exe so its all self containing assuming your compiling the script and not just running it as an .au3

Good to use if you want to make things portable. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By cruisepandey
      Hi There ! 
      I have a script here : 
       
      ;Launch CMD
      Run("C:\Windows\System32\cmd.exe")
      sleep(2000)
      $cmdHandle = WinActivate("C:\Windows\System32\cmd.exe")
      Sleep(2000)
      ;Sending document
      ControlSend($cmdHandle, "", "", "ftp" & @CRLF)
      ControlSend($cmdHandle, "", "", "open" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "first command" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "second-coomand" & @CRLF)
       
      first-command and second-command I can't provide cause it's internal. I have complied this .au3 file into an exe and it does the work. But I need to invoke this with Java. Java code I have tried is : 
       
          ProcessBuilder pb = new ProcessBuilder("C:\\Users\\username\\eclipse-workspace\\Examples\\src\\com\\own\\examples\\etc.exe");
          pb.start();
          Thread.sleep(5000);
       
      Through java it just launches the cmd and nothing happens after that. Please help !!
    • By Chimp
      I'm trying to drive a command prompt by sending instructions via a NamedPipe.
      This way you can (should) be able to send commands to the command prompt and at the same time "view" the result in the same window.
      This is not allowed if you run a command prompt with "opt_flag" parameters (redirected streams) because this will disable StdOut on the cmd itself.
      This small (trivial) snippet works for the first command sent to the cmd, but further submissions will fail.
      Maybe the problem is in how I use the run () command to start a new cmd with the StdIn redirect from the NamedPipe. It seems that the generated cmd will close automatically after the first reception of the command via NamedPipe.
      suggestions on how to make it work are welcome
      thanks
      #include <NamedPipes.au3> #include <WinAPI.au3> ; Creates an instance of a named pipe Global $sPipeName = "\\.\pipe\pipename" Global $hPipe = _NamedPipes_CreateNamedPipe($sPipeName, 1, 1) MsgBox(0, "Debug", "Pipe created. Now open a CMD") ; run a cmd with only StdIn redirected (StdIn data incoming from a pipe) Global $hCMD = Run(@ComSpec & " /K cmd < " & $sPipeName & @CRLF, "c:\") ; ok? MsgBox(0, "Debug", "now Send a command to the cmd via a NamedPipe") _StdInPipeWrite("dir" & @CRLF) MsgBox(0, 'Debug', "further commands will fail" & @CRLF & "now send command 'dir c:\windows'") $sMessage = "Dir c:\windows" & @CRLF _StdInPipeWrite($sMessage) MsgBox(0, 'Debug', "send another command (will also fail)" & @CRLF & "now send command 'echo Hello'") _StdInPipeWrite("echo Hello" & @CRLF) MsgBox(0, "Debug", "end of test") ProcessClose($hCMD) Func _StdInPipeWrite($sMessage) ; =============================================================================================================================== ; This function writes a message to the pipe ; =============================================================================================================================== Local $iWritten, $iBuffer, $pBuffer, $tBuffer $iBuffer = StringLen($sMessage) + 1 $tBuffer = DllStructCreate("char Text[" & $iBuffer & "]") $pBuffer = DllStructGetPtr($tBuffer) DllStructSetData($tBuffer, "Text", $sMessage) If Not _WinAPI_WriteFile( _ $hPipe, _ ; ...... Handle to the file to be written $pBuffer, _ ; .... Pointer to the buffer containing the data to be written $iBuffer, _ ; .... Number of bytes to be written to the file $iWritten, _ ; ... The number of bytes written 0 _ ; ............ [optional] A $tagOVERLAPPED structure or a pointer to it ) Then ConsoleWrite("WriteMsg: _WinAPI_WriteFile failed" & @CRLF & _WinAPI_GetLastErrorMessage()) Else ConsoleWrite("WriteMsg: write OK" & @CRLF & _WinAPI_GetLastErrorMessage() & @CRLF) EndIf EndFunc ;==>_StdInPipeWrite  
    • By Burgs
      Greetings,
        I would like to be able to write a script to send commands to the console for creation of Gstreamer pipelines.  I was thinking of something similar to this:
      Local $iPID = Run("C:\Windows\System32\cmd", "", @SW_MAXIMIZE) ;THIS OPENS THE CONSOLE...!!! if $iPID == 0 Then ConsoleWrite(@CRLF & "I DID NOT OPEN CMD...error: " & @error & @CRLF) if $iPID <> 0 Then ConsoleWrite(@CRLF & "I OPENED CMD...!!!" & @CRLF) $hCmd = WinGetHandle("C:\WINDOWS\system32\cmd.exe") if $hCmd <> 0 Then WinActivate($hCmd) ;ensure command console is active... $sOutput = Send("cd C:\gstreamer\1.0\x86_64\bin" & @CRLF, $SEND_RAW) $sOutput = Send("gst-launch-1.0 videotestsrc ! autovideosink" & @CRLF, $SEND_RAW) Sleep(3000) ControlSend($hCmd, "", "", "exit" & @CR) EndIf ;$hCmd NOT "0"... I don't really know if this is the best way to open the console and send commands into it.  I'm also not sure about how to best catch any errors that may occur...likely this needs to be accomplished with the STDOUTREAD command however I've not had experience using it before and therefore would appreciate some advice that anybody may offer. 
      Basically I'm seeking guidance on how to best automate the opening of the console, sending lines of commands to be executed, and handling any potential errors in the execution of those commands...I thank you in advance.  Regards.
    • By MadhaN
      Hi all,
      I have a csv file as below, I wand to find srno from csv and send corresponding ip and pass to commend cmd prompt. 
      Please guide me to create script .
      srno,name,ip,pass
      1,name1,ip1,pass1
      2,name2,ip2,pass2
       
       
       
       
    • By lonardd
      Hi
      I have to run an executable with a parameter preceded by a /, like this:
      c:\myfolder\Tools\AutomaticRun\myexe.EXE /filename=c:\myfolder\Tools\AutomaticRun\myTemplate.xml")
      I tried both this:
      $iReturn = RunWait ("c:\myfolder\Tools\AutomaticRun\myexe.EXE"," /filename=c:\myfolder\Tools\AutomaticRun\myTemplate.xml")
      and using COMSPEC as per some posted suggestions on this forum:
      Run(@comspec & ' /c "c:\myfolder\Tools\AutomaticRun\myexe.EXE" /filename=c:\myfolder\Tools\AutomaticRun\myTemplate.xml')
      They both seem to fail.
      Can you please tell me what I'm doing wrong?
      Thanks
      Dave
       
×
×
  • Create New...