bagas9425

How to Handle Error on FF.au3 like IE.au3?

1 post in this topic

#1 ·  Posted (edited)

Hi, everyone.

I want to handle error in Firefox like in IE.

This is my code.

_IEErrorHandlerRegister(_ErrFunc)

Func _ErrFunc($oError)
    ; Do anything here.
    $sRead = IniRead("error.ini", "Email", "Sent", "Default")
    $24time = _NowTime(5)

    ; Read the error.InI set error = 1 if error is caught

        $ErrorMessage = (@ScriptName & " (" & $oError.scriptline & ") : ==> COM Error intercepted !" & @CRLF & _
            @TAB & "err.number is: " & @TAB & @TAB & "0x" & Hex($oError.number) & @CRLF & _
            @TAB & "err.windescription:" & @TAB & $oError.windescription & @CRLF & _
            @TAB & "err.description is: " & @TAB & $oError.description & @CRLF & _
            @TAB & "err.source is: " & @TAB & @TAB & $oError.source & @CRLF & _
            @TAB & "err.helpfile is: " & @TAB & $oError.helpfile & @CRLF & _
            @TAB & "err.helpcontext is: " & @TAB & $oError.helpcontext & @CRLF & _
            @TAB & "err.lastdllerror is: " & @TAB & $oError.lastdllerror & @CRLF & _
            @TAB & "err.scriptline is: " & @TAB & $oError.scriptline & @CRLF & _
            @TAB & "Current Time is: " & @TAB & $24time & @CRLF & _
            @TAB & "err.retcode is: " & @TAB & "0x" & Hex($oError.retcode) & @CRLF & @CRLF)

    ;   LogError($ErrorMessage)
        If $sRead = 0 Then
            Call("Alert", "error ", $ErrorMessage)
            IniWrite ("error.ini", "Email", "Sent", 1)
        EndIf
        LogError("An Error happened, error event triggered")
EndFunc   ;==>_ErrFunc

How can I change to FF.au3?

Thanks.

Edited by bagas9425

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • Dent
      By Dent
      As the title says. I open IE11 and navigate to a page with the following HTML5 file upload container in Capture0.JPG
      I want to click Add Files but I haven't been able to. Here's the code that handles the Add Files button in Capture.JPG
      _IEGetObjectById and then using _IEAction to click it doesn't work. I can't give access to the actual page unfortunately because it's password protected.
      All suggestions welcome.


    • Kevin Finnegan
      By Kevin Finnegan
      Hi all,
      Long time lurker and now forum poster! I'm writing a relatively simple backup script for my firm that automates the copy, compression and organization of Leaver's data on one of our secured NAS systems. I personally found the best method to do this so far was to use 7zG.exe (GUI version of 7Zip which can use command-line too) and it functions quite well!
      I would like to retrieve more info on whether any warnings or errors happen in 7Zip during the backup, but I can't quite get my head around the syntax and switches for reading out, it seems any adjustment I make to the RunWait call's string seems to break the backup or give unexpected repercussions! Hopefully its something silly I'm doing as I don't code very often.
      Here is the working version:
      ; Compress the directories one by one in the zip using the listfile.... Local $iPID = RunWait(@ScriptDir & "\bin\7zG.exe a -mx" & $compressionQuality & " -v" & $compressSplitFileSize & " -wc:\temp " _ & $backupToLocation & "\" & $userDirectory & ".7z @bin\listfile.txt -x@bin\excludefile.txt", "", @SW_SHOWDEFAULT, $STDOUT_CHILD) Ultimately I would love to switch entirely to 7za.exe (standalone) so that I can read the progress percentage, current file being uploaded and any warnings or errors could be processed and output to the AutoIT script's GUI I've created rather than jumping in and out of two applications per se.
       
    • milos83
      By milos83
      I have one script that creates _IECreateEmbedded and another script that does _IEAttach.
      I do this because when autoit is doing something, the Embedded IE starts stalling (eg jquery progress animation)
      But there is a new problem.
      When IE is having its own process (like in the example above) any _IE command is slow (in the script that Attaches).
      Here is a comparison of when its in separate and when its in same process:
      Separate process _IETagNameGetCollection : 5000ms
      Separate process _IEAction: 850ms
      Same process _IETagNameGetCollection : 1ms
      Same proccess _IEAction: 135ms
       
      If I try to attach to an embedded IE that is done in c#, I get lightning fast results.
      As you can see, _IE functions work very slow when the embedded IE we are attaching to is made in Autoit.
       
      I did a test and if I empty the WHILE loop in IE process I get these results(but the cpu is at 30% as expected):
      Separate process _IETagNameGetCollection : 33ms
      Separate process _IEAction: 13ms
       
      It slows down if you put anything (like GUIGetMsg) in the WHILE loop.
       
      How do I fix this?
       
      Create IE:
      #include <GUIConstantsEx.au3> #include <IE.au3> #include <WindowsConstants.au3> Local $oIE = _IECreateEmbedded() GUICreate("My Embedded Web control Test", 640, 580, (@DesktopWidth - 640) / 2, (@DesktopHeight - 580) / 2, $WS_OVERLAPPEDWINDOW + $WS_CLIPSIBLINGS + $WS_CLIPCHILDREN) GUICtrlCreateObj($oIE, 10, 40, 600, 360) GUISetState(@SW_SHOW) ;Show GUI _IENavigate($oIE, "http://www.autoitscript.com") $timer = TimerInit() $oLink = _IETagNameGetCollection($oIE, "a", 3) ;takes 1ms ConsoleWrite(TimerDiff($timer) & @CRLF) $timer = TimerInit() _IEAction($oLink, "click") ;takes 135ms ConsoleWrite(TimerDiff($timer) & @CRLF) While 1 Local $iMsg = GUIGetMsg() Select Case $iMsg = $GUI_EVENT_CLOSE ExitLoop EndSelect WEnd  
      Attach to IE:
      #include <IE.au3> Local $oIE = _IEAttach("My Embedded Web control Test", "embedded") $timer = TimerInit() $oLink = _IETagNameGetCollection($oIE, "a", 3) ; 5000ms ConsoleWrite(TimerDiff($timer) & @CRLF) $timer = TimerInit() _IEAction($oLink, "click") ; 850ms ConsoleWrite(TimerDiff($timer) & @CRLF)  
       
      attach.au3
      create.au3
    • nassausky
      By nassausky
      Hi all,
       
      Anyone have any idea how to close all open tabs except a specific one I manually open.  Assuming I don't know what is open in all the tabs except just the one I want to keep open.
       
      I didn't want to use sendkeys and I was trying to use the following code to list the title (or url) of the 3 open tabs and  after I got that part working I would just close the other 2. This sample only displays the title of the first open tab
      #include <IE.au3> Const $ie_new_in_tab = 0x0800 $oIE = _IECreate("https://www.autoitscript.com") __IENavigate($oIE, "https://www.autoitscript.com/forum/", 1, $ie_new_in_tab) ;(obj,url,wait,param) __IENavigate($oIE, "https://www.google.com/", 1, $ie_new_in_tab) ;(obj,url,wait,param) Local $aIE[1] $aIE[0] = 0 Local $i = 1, $oIE While 1     $oIE = _IEAttach("", "instance", $i)     If @error = $_IEStatus_NoMatch Then ExitLoop     ConsoleWrite(_IEPropertyGet($oIE, "title") & @CRLF)     ReDim $aIE[$i + 1]     $aIE[$i] = $oIE ;each item holds object     $aIE[0] = $i ;first item holds count     $i += 1 WEnd MsgBox($MB_SYSTEMMODAL, "Browsers Found", "Number of browser instances in the array: " & $aIE[0]) ; This doesn't return the list of tabs in the console just the first tab  
      Thanks for any and all help
    • mattia100
      By mattia100
      HI!
      1) I want to create a FF web page in background... i want to say a web page that can't be seen in the application bar  but only in Windows Task Manager... 
      maybe using  __FFStartProcess? in fact i tried to use it but the parameter "hide" only can minimize the page, but not put it in background... 
      2) After creating this hide page, i would to open a macro of the iMacros addon, always all in hide mode...
      it is possible to do it?
      anybody can help me?
      Thanks!!