VenusProject2

GUI contaminated by closing child GUI

4 posts in this topic

#1 ·  Posted (edited)

Trying to isolate the cause of my parent GUI's graphic becoming contaminated by closing of a child GUI.

The example script below creates the parent GUI, then I click a button to display a digital clock, I use keys to start, pause & resume the clock. NOTE: to exit the clock display after the clock has started hold down the 'ESC' key for more than 3seconds. Upon the clock closing the contamination should be evident.

2016-03-08-GUI_Rubbish.jpg

 

#include <Misc.au3>
#include <GUIConstants.au3>
#include <Date.au3>

HotKeySet("{ESC}", "_ExitClock");To Exit Digital Clock use "Esc" key held for >3sec

Dim $aXY[2]
Global $Init0, $PausedTimer, $iTimerHours, $iTimerMins, $iTimerSecs
Global $sec = @SEC
Global $hDLL = DllOpen("user32.dll")
Global $iEvent = 0
Global $AlarmHour = 0
Global $AlarmMin = 0
Global $AlarmSec = 0
Global  $SecSquare = GUICtrlCreateGraphic(0, 0, 0, 0)
Global  $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);Local Time
Global  $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
Global $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30);Alarm Time
Global $gui
Dim $aDigChar[14]
_initDigChar($aDigChar)

; Create a GUI with various controls.
Local $Form1 = GUICreate("Example")

Local $StartB = GUICtrlCreateButton("Use 'Alt+S' to start Clock", 130, 200, 150, 25)
Local $PauseB = GUICtrlCreateButton("Use 'Alt+P' to pause Clock", 130, 250, 150, 25)
Local $ResumeB = GUICtrlCreateButton("Use 'Alt+R' to resume Clock", 130, 300, 150, 25)
GUICtrlSetState($StartB, $GUI_DISABLE)
GUICtrlSetState($PauseB, $GUI_DISABLE)
GUICtrlSetState($ResumeB, $GUI_DISABLE)

Local $OK = GUICtrlCreateButton("Display Clock", 270, 370, 125, 25)

; Display the GUI.
GUISetState(@SW_SHOW, $Form1)

; Loop until the user exits.
While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE, $idOK
            ExitLoop
        Case $OK
            _DigitalClock()

    EndSwitch
WEnd

; Delete the previous GUI and all controls.
GUIDelete($Form1)


Func _DigitalClock()
    $gui = GUICreate("Digital Timer", 702, 40, -1, -1, -1, $WS_EX_TOPMOST)
    ;$gui = GUICreate("Test", 702, 702)
    GUISetBkColor(0x000000)

    GUISetState()


    $SecSquare = GUICtrlCreateGraphic(0, 0, 0, 0)
    $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);Local Time
    $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
    $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30);Alarm Time




    Dim $msg[1]
    ;$AddMinutes = 10
    While 1
        ; main loop, waits until @sec changes and then executes main drawing management function
        While @SEC = $sec
            $msg = GUIGetMsg(1)
            If $msg[0] = -3 Then
                DllClose($hDLL)
                Return
            EndIf
            If _IsPressed("12", $hDLL) Then;'Alt'
                ConsoleWrite("_IsPressed - Alt Key was pressed." & @CRLF)

                ; Wait until key is released.
                    While _IsPressed("12", $hDLL);
                        If _IsPressed("53",$hDLL) Then;'s'
                            ConsoleWrite("_IsPressed - 'o' Key was pressed." & @CRLF)

                            start_timer()
                        EndIf
                        If _IsPressed("50",$hDLL) Then;'p'
                            ConsoleWrite("_IsPressed - 'p' Key was pressed." & @CRLF)
                            pause_timer()
                        EndIf
                        If _IsPressed("52",$hDLL) Then;'r'
                            ConsoleWrite("_IsPressed - 'r' Key was pressed." & @CRLF)
                            resume_timer()
                        EndIf
                        Sleep(300);(250)
                    WEnd
            ElseIf _IsPressed("1B", $hDLL) Then
                MsgBox($MB_SYSTEMMODAL, "_IsPressed", "The Esc Key was pressed, therefore we will close the application.")
                ExitLoop
            EndIf

            Sleep(10)

        WEnd

        _draw()
        Sleep(50)
        $sec = @SEC
    WEnd
EndFunc; ==> _DigitalCLock


Func _ExitClock();Press Escape key for >5sec
    Local $Count = 0
    If _IsPressed("1B",$hDLL) Then
        $Return = _KeyPressed("1B", $Count)
        ConsoleWrite("Escape Key Held for - " & $Return & "mS" & @CRLF)
        If $Return > 3000 Then
            DllClose($hDLL)
            AdlibUnRegister("show_timer")
            GUIDelete($gui)
            GUISetState(@SW_ENABLE, $Form1);enable parent GUI
            GUISetState(@SW_SHOW,$Form1)
        EndIf
    Endif
EndFunc;==>_ExitClock()

Func _KeyPressed($kp_Key, ByRef $kp_Count)
    $kp_Count += 1
    Local $kp_Timer = TimerInit()
    While _IsPressed("1B")
        Sleep(100)
    WEnd
    Return TimerDiff($kp_Timer)
EndFunc   ;==>_KeyPressed


;################ Functions from StopwatchUDF.au3 #####################
; The function that starts or resets the stopwatch
Func start_timer()
   HotKeySet("{NUMPADMULT}") ;disable resume timer
   HotKeySet("{NUMPADSUB}", "pause_timer") ;enable pause timer
   $PausedTimer = 0
   $Init0 = TimerInit()
   AdlibRegister("show_timer", 60)


EndFunc   ;==>start_timer

; The function that pauses the stopwatch
Func pause_timer()
   HotKeySet("{NUMPADSUB}") ;disable pause timer
   HotKeySet("{NUMPADMULT}", "resume_timer") ;enable resume timer
   $PausedTimer += Int(TimerDiff($Init0))
   AdlibUnRegister()
EndFunc   ;==>pause_timer

; The function that resumes the stopwatch
Func resume_timer()
   HotKeySet("{NUMPADMULT}") ;disable resume timer
   HotKeySet("{NUMPADSUB}", "pause_timer") ;enable pause timer
   $Init0 = TimerInit()
   AdlibRegister("show_timer", 60)
EndFunc   ;==>resume_timer

Func show_timer()     ; _TicksToTime to get hours, mins, seconds
   _TicksToTime(Int(TimerDiff($Init0) + $PausedTimer), $iTimerHours, $iTimerMins, $iTimerSecs)

   ;StringFormat to display the time as HH:MM:SS
   ;ToolTip("HH:MM:SS = " & StringFormat("%02i:%02i:%02i", $iHours, $iMins, $iSecs), 0, 0, "Timer")
EndFunc   ;==>show_timer

; Exit
Func Quit()
   Exit
EndFunc   ;==>Quit
;################ Functions from StopwatchUDF.au3 #####################

Func _draw($forceDraw = False)
    ; calculates angles for min/sec dials, manages execution of drawing routines
    Local $doDraw = False

    Sleep(25)
    ;_drawSec()
    _DrawClock()
    _DrawTimer();Digital Cue Timer 00:00:00
    _DrawAlarmTime($iEvent);Event no. in Sequence with Hints in test string
    GUICtrlSetGraphic($SecSquare, $GUI_GR_REFRESH)
EndFunc   ;==>_draw
;#cs
Func _DrawClock();Digital System Time
    ;return
    ; manages execution of write commands for HH MM SS characters
    GUICtrlDelete($ClockSquare)
    $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);5, 5, 200, 30
    _timeWrite(0, Int(@HOUR / 10), "regular", $ClockSquare);e.g. 1pm = 13 /10 =1
    _timeWrite(20, Mod(@HOUR, 10), "regular", $ClockSquare);e.g. 1pm = 13Mod10 = 1 with 3 remainder
    _timeWrite(50, Int(@MIN / 10), "regular", $ClockSquare)
    _timeWrite(70, Mod(@MIN, 10), "regular", $ClockSquare)
    _timeWrite(100, Int(@SEC / 10), "regular", $ClockSquare)
    _timeWrite(120, Mod(@SEC, 10), "regular", $ClockSquare)
EndFunc   ;==>_drawTime
;#ce
Func _DrawTimer();Digital Cue Timer 00:00:00
    ;return
    ; manages execution of write commands for HH MM SS characters
    GUICtrlDelete($TimerSquare)
    $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
    _timeWrite(0, 13, "Timer", $TimerSquare);C
    _timeWrite(20, 11, "Timer", $TimerSquare);L
    _timeWrite(50, 12, "Timer", $TimerSquare);-
    _timeWrite(80, Int($iTimerHours / 10), "Timer", $TimerSquare)
    _timeWrite(100, Mod($iTimerHours, 10), "Timer", $TimerSquare)
    _timeWrite(130, Int($iTimerMins / 10), "Timer", $TimerSquare)
    _timeWrite(150, Mod($iTimerMins, 10), "Timer", $TimerSquare)
    _timeWrite(180, Int($iTimerSecs / 10), "Timer", $TimerSquare)
    _timeWrite(200, Mod($iTimerSecs, 10), "Timer", $TimerSquare)

EndFunc   ;==>_drawTime
;#cs
Func _drawAlarmTime($iEvent);Digital Time
    ;Return
    ; manages execution of write commands for HH MM SS characters for the Alarm time
    GUICtrlDelete($AlarmSquare)
    $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30)
    _timeWrite(0, 10, "Alarm", $AlarmSquare);A
    _timeWrite(20, 11, "Alarm", $AlarmSquare);L
    _timeWrite(50, 12, "Alarm", $AlarmSquare);-
    _timeWrite(80, Int($AlarmHour / 10), "Alarm", $AlarmSquare)
    _timeWrite(100, Mod($AlarmHour, 10), "Alarm", $AlarmSquare)
    _timeWrite(130, Int($AlarmMin / 10), "Alarm", $AlarmSquare)
    _timeWrite(150, Mod($AlarmMin, 10), "Alarm", $AlarmSquare)
    _timeWrite(180, Int($AlarmSec / 10), "Alarm", $AlarmSquare)
    _timeWrite(200, Mod($AlarmSec, 10), "Alarm", $AlarmSquare)
EndFunc   ;==>_drawAlarmTime
;#ce
Func _timeWrite($pos, $num, $type, $graph) ; $type is "Regular" or "Alarm" or "Timer"
    ; manages coloring and writing of 7 segement LEDs for time writing

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 1, 1), $type);0
    _line($graph, $pos + 5, 2, $pos + 3, 10)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 2, 1), $type);1
    _line($graph, $pos + 2, 14, $pos + 0, 22)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 3, 1), $type);2
    _line($graph, $pos + 5 + 2, 0, $pos + 5 + 8, 0)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 4, 1), $type);3
    _line($graph, $pos + 2 + 2, 12, $pos + 2 + 8, 12)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 5, 1), $type);4
    _line($graph, $pos + 2, 24, $pos + 8, 24)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 6, 1), $type);5
    _line($graph, $pos + 5 + 10, 2, $pos + 3 + 10, 10)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 7, 1), $type);6
    _line($graph, $pos + 2 + 10, 14, $pos + 10, 22)
EndFunc   ;==>_timeWrite

;#cs
Func _line($graph, $x1, $y1, $x2, $y2);Seven Segment Display
    ;Return
    ; draws line for time writing
    GUICtrlSetGraphic($graph, $GUI_GR_MOVE, $x1 + 2, $y1 + 2)
    GUICtrlSetGraphic($graph, $GUI_GR_LINE, $x2 + 2, $y2 + 2)
EndFunc   ;==>_line
;#ce
Func _setColorAndPenForWrite($char, $type)
    ; sets color and pen for next line in time writing, based on '0' or '1' in the DigChar array
    If $char = "1"  Then;7 Segment display ON=1 or OFF=0
        If $type = "Alarm"  Then
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_COLOR, 0xCCCCCC, 0xCCCCCC)
        ElseIf $type = "Timer" Then
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_COLOR, 0x00ff00, 0x00ff00);ct - Bright Green RGB
        Else
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_COLOR, 0xEE0000, 0xEE0000)
        EndIf
    Else
        If $type = "Alarm"  Then
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_COLOR, 0x222222, 0x222222)
        ElseIf $type = "Timer" Then;ct
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_COLOR, 0x002200, 0x002200);ct - Lite Green RGB
        Else
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_COLOR, 0x330000, 0x330000)
        EndIf
    EndIf
EndFunc   ;==>_setColorAndPenForWrite

Func _drawSec()
    Return
    ; draws circle seconds indicator
    $aXY = _getXY(@SEC, 240)
    GUICtrlDelete($SecSquare)
    $SecSquare = GUICtrlCreateGraphic(350 + $aXY[0] - 8, 350 + $aXY[1] - 8, 16, 16)
    GUICtrlSetGraphic($SecSquare, $GUI_GR_COLOR, 0x0000FF, 0x0000FF)
    GUICtrlSetGraphic($SecSquare, $GUI_GR_ELLIPSE, 0, 0, 16, 16)
EndFunc   ;==>_drawSec

Func _getXY($sec, $hypo)
    ; returns array with X,Y coordinates for the seconds points for $sec seconds, with $hypo(tenuse) distance from center
    Dim $result[2]
    Local $pi = 3.14159265358979
    Local $degToRad = $pi / 180
    Local $degrees = $sec * 6 - 90
    Local $x = Cos($degrees * $degToRad) * $hypo
    Local $y = Sin($degrees * $degToRad) * $hypo
    $result[0] = $x
    $result[1] = $y
    Return $result
EndFunc   ;==>_getXY


Func _initDigChar(ByRef $aDigChar)
    ; define leds for digital numbers: 1 or 0 for leds on/off in 7-led digital clock characters
    $aDigChar[0] = "1110111"
    $aDigChar[1] = "0000011"
    $aDigChar[2] = "0111110"
    $aDigChar[3] = "0011111"
    $aDigChar[4] = "1001011"
    $aDigChar[5] = "1011101"
    $aDigChar[6] = "1111101"
    $aDigChar[7] = "0010011"
    $aDigChar[8] = "1111111"
    $aDigChar[9] = "1011111"
    $aDigChar[10] = "1111011" ; A
    $aDigChar[11] = "1100100" ; L
    $aDigChar[12] = "0001000" ; -
    $aDigChar[13] = "1110100" ;C
EndFunc   ;==>_initDigChar

Any help appreciated

Thanks Chris

Edited by VenusProject2

Share this post


Link to post
Share on other sites



VenusProject2,

You were exiting the clock within the _ExitClock function which was called by a HotKey. This function deleted the clock GUI, but did not affect the loop inside the _DigitalClock function, so the _draw function was still called and, as the only GUI left was the main one, that is where the function drew the clock.

I suggest you use a flag to show when the clock has been killed in the HotKey function and look for that flag in the loop - like this:

#include <Misc.au3>
#include <GUIConstants.au3>
#include <Date.au3>

Opt("TrayIconDebug", 1)

Global $fClose = False

HotKeySet("{ESC}", "_ExitClock");To Exit Digital Clock use "Esc" key held for >3sec

Dim $aXY[2]
Global $Init0, $PausedTimer, $iTimerHours, $iTimerMins, $iTimerSecs
Global $sec = @SEC
Global $hDLL = DllOpen("user32.dll")
Global $iEvent = 0
Global $AlarmHour = 0
Global $AlarmMin = 0
Global $AlarmSec = 0
Global  $SecSquare = GUICtrlCreateGraphic(0, 0, 0, 0)
Global  $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);Local Time
Global  $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
Global $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30);Alarm Time
Global $gui
Dim $aDigChar[14]
_initDigChar($aDigChar)

; Create a GUI with various controls.
Local $Form1 = GUICreate("Example")

Local $StartB = GUICtrlCreateButton("Use 'Alt+S' to start Clock", 130, 200, 150, 25)
Local $PauseB = GUICtrlCreateButton("Use 'Alt+P' to pause Clock", 130, 250, 150, 25)
Local $ResumeB = GUICtrlCreateButton("Use 'Alt+R' to resume Clock", 130, 300, 150, 25)
GUICtrlSetState($StartB, $GUI_DISABLE)
GUICtrlSetState($PauseB, $GUI_DISABLE)
GUICtrlSetState($ResumeB, $GUI_DISABLE)

Local $OK = GUICtrlCreateButton("Display Clock", 270, 370, 125, 25)

; Display the GUI.
GUISetState(@SW_SHOW, $Form1)

; Loop until the user exits.
While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE, $idOK
            ExitLoop
        Case $OK
            _DigitalClock()

    EndSwitch
WEnd

; Delete the previous GUI and all controls.
GUIDelete($Form1)


Func _DigitalClock()
    $gui = GUICreate("Digital Timer", 702, 40, -1, -1, -1, $WS_EX_TOPMOST)
    ;$gui = GUICreate("Test", 702, 702)
    GUISetBkColor(0x000000)

    GUISetState()


    $SecSquare = GUICtrlCreateGraphic(0, 0, 0, 0)
    $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);Local Time
    $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
    $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30);Alarm Time




    Dim $msg[1]
    ;$AddMinutes = 10
    While 1
        ; main loop, waits until @sec changes and then executes main drawing management function
        While @SEC = $sec
            $msg = GUIGetMsg(1)
            If $msg[0] = -3 Then
                DllClose($hDLL)
                Return
            EndIf
            If _IsPressed("12", $hDLL) Then;'Alt'
                ConsoleWrite("_IsPressed - Alt Key was pressed." & @CRLF)

                ; Wait until key is released.
                    While _IsPressed("12", $hDLL);
                        If _IsPressed("53",$hDLL) Then;'s'
                            ConsoleWrite("_IsPressed - 'o' Key was pressed." & @CRLF)

                            start_timer()
                        EndIf
                        If _IsPressed("50",$hDLL) Then;'p'
                            ConsoleWrite("_IsPressed - 'p' Key was pressed." & @CRLF)
                            pause_timer()
                        EndIf
                        If _IsPressed("52",$hDLL) Then;'r'
                            ConsoleWrite("_IsPressed - 'r' Key was pressed." & @CRLF)
                            resume_timer()
                        EndIf
                        Sleep(300);(250)
                    WEnd
            ElseIf _IsPressed("1B", $hDLL) Then
                MsgBox($MB_SYSTEMMODAL, "_IsPressed", "The Esc Key was pressed, therefore we will close the application.")
                ExitLoop
            EndIf

            Sleep(10)

        WEnd

        If $fClose Then
            $fClose = False
            AdlibUnRegister("show_timer")
            GUIDelete($gui)
            GUISetState(@SW_ENABLE, $Form1);enable parent GUI
            GUISetState(@SW_SHOW,$Form1)
            Return
        Else
            _draw()
            Sleep(50)
            $sec = @SEC
        EndIf
    WEnd
EndFunc; ==> _DigitalCLock


Func _ExitClock();Press Escape key for >5sec
    Local $Count = 0
    If _IsPressed("1B",$hDLL) Then
        $Return = _KeyPressed("1B", $Count)
        ConsoleWrite("Escape Key Held for - " & $Return & "mS" & @CRLF)
        If $Return > 3000 Then
            $fClose = True
        EndIf
    Endif
EndFunc;==>_ExitClock()

Func _KeyPressed($kp_Key, ByRef $kp_Count)
    $kp_Count += 1
    Local $kp_Timer = TimerInit()
    While _IsPressed("1B")
        Sleep(100)
    WEnd
    Return TimerDiff($kp_Timer)
EndFunc   ;==>_KeyPressed


;################ Functions from StopwatchUDF.au3 #####################
; The function that starts or resets the stopwatch
Func start_timer()
   HotKeySet("{NUMPADMULT}") ;disable resume timer
   HotKeySet("{NUMPADSUB}", "pause_timer") ;enable pause timer
   $PausedTimer = 0
   $Init0 = TimerInit()
   AdlibRegister("show_timer", 60)


EndFunc   ;==>start_timer

; The function that pauses the stopwatch
Func pause_timer()
   HotKeySet("{NUMPADSUB}") ;disable pause timer
   HotKeySet("{NUMPADMULT}", "resume_timer") ;enable resume timer
   $PausedTimer += Int(TimerDiff($Init0))
   AdlibUnRegister()
EndFunc   ;==>pause_timer

; The function that resumes the stopwatch
Func resume_timer()
   HotKeySet("{NUMPADMULT}") ;disable resume timer
   HotKeySet("{NUMPADSUB}", "pause_timer") ;enable pause timer
   $Init0 = TimerInit()
   AdlibRegister("show_timer", 60)
EndFunc   ;==>resume_timer

Func show_timer()     ; _TicksToTime to get hours, mins, seconds
   _TicksToTime(Int(TimerDiff($Init0) + $PausedTimer), $iTimerHours, $iTimerMins, $iTimerSecs)

   ;StringFormat to display the time as HH:MM:SS
   ;ToolTip("HH:MM:SS = " & StringFormat("%02i:%02i:%02i", $iHours, $iMins, $iSecs), 0, 0, "Timer")
EndFunc   ;==>show_timer

; Exit
Func Quit()
   Exit
EndFunc   ;==>Quit
;################ Functions from StopwatchUDF.au3 #####################

Func _draw($forceDraw = False)
    ; calculates angles for min/sec dials, manages execution of drawing routines
    Local $doDraw = False

    Sleep(25)
    ;_drawSec()
    _DrawClock()
    _DrawTimer();Digital Cue Timer 00:00:00
    _DrawAlarmTime($iEvent);Event no. in Sequence with Hints in test string
    GUICtrlSetGraphic($SecSquare, $GUI_GR_REFRESH)
EndFunc   ;==>_draw
;#cs
Func _DrawClock();Digital System Time
    ;return
    ; manages execution of write commands for HH MM SS characters
    GUICtrlDelete($ClockSquare)
    $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);5, 5, 200, 30
    _timeWrite(0, Int(@HOUR / 10), "regular", $ClockSquare);e.g. 1pm = 13 /10 =1
    _timeWrite(20, Mod(@HOUR, 10), "regular", $ClockSquare);e.g. 1pm = 13Mod10 = 1 with 3 remainder
    _timeWrite(50, Int(@MIN / 10), "regular", $ClockSquare)
    _timeWrite(70, Mod(@MIN, 10), "regular", $ClockSquare)
    _timeWrite(100, Int(@SEC / 10), "regular", $ClockSquare)
    _timeWrite(120, Mod(@SEC, 10), "regular", $ClockSquare)
EndFunc   ;==>_drawTime
;#ce
Func _DrawTimer();Digital Cue Timer 00:00:00
    ;return
    ; manages execution of write commands for HH MM SS characters
    GUICtrlDelete($TimerSquare)
    $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
    _timeWrite(0, 13, "Timer", $TimerSquare);C
    _timeWrite(20, 11, "Timer", $TimerSquare);L
    _timeWrite(50, 12, "Timer", $TimerSquare);-
    _timeWrite(80, Int($iTimerHours / 10), "Timer", $TimerSquare)
    _timeWrite(100, Mod($iTimerHours, 10), "Timer", $TimerSquare)
    _timeWrite(130, Int($iTimerMins / 10), "Timer", $TimerSquare)
    _timeWrite(150, Mod($iTimerMins, 10), "Timer", $TimerSquare)
    _timeWrite(180, Int($iTimerSecs / 10), "Timer", $TimerSquare)
    _timeWrite(200, Mod($iTimerSecs, 10), "Timer", $TimerSquare)

EndFunc   ;==>_drawTime
;#cs
Func _drawAlarmTime($iEvent);Digital Time
    ;Return
    ; manages execution of write commands for HH MM SS characters for the Alarm time
    GUICtrlDelete($AlarmSquare)
    $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30)
    _timeWrite(0, 10, "Alarm", $AlarmSquare);A
    _timeWrite(20, 11, "Alarm", $AlarmSquare);L
    _timeWrite(50, 12, "Alarm", $AlarmSquare);-
    _timeWrite(80, Int($AlarmHour / 10), "Alarm", $AlarmSquare)
    _timeWrite(100, Mod($AlarmHour, 10), "Alarm", $AlarmSquare)
    _timeWrite(130, Int($AlarmMin / 10), "Alarm", $AlarmSquare)
    _timeWrite(150, Mod($AlarmMin, 10), "Alarm", $AlarmSquare)
    _timeWrite(180, Int($AlarmSec / 10), "Alarm", $AlarmSquare)
    _timeWrite(200, Mod($AlarmSec, 10), "Alarm", $AlarmSquare)
EndFunc   ;==>_drawAlarmTime
;#ce
Func _timeWrite($pos, $num, $type, $graph) ; $type is "Regular" or "Alarm" or "Timer"
    ; manages coloring and writing of 7 segement LEDs for time writing

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 1, 1), $type);0
    _line($graph, $pos + 5, 2, $pos + 3, 10)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 2, 1), $type);1
    _line($graph, $pos + 2, 14, $pos + 0, 22)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 3, 1), $type);2
    _line($graph, $pos + 5 + 2, 0, $pos + 5 + 8, 0)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 4, 1), $type);3
    _line($graph, $pos + 2 + 2, 12, $pos + 2 + 8, 12)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 5, 1), $type);4
    _line($graph, $pos + 2, 24, $pos + 8, 24)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 6, 1), $type);5
    _line($graph, $pos + 5 + 10, 2, $pos + 3 + 10, 10)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 7, 1), $type);6
    _line($graph, $pos + 2 + 10, 14, $pos + 10, 22)
EndFunc   ;==>_timeWrite

;#cs
Func _line($graph, $x1, $y1, $x2, $y2);Seven Segment Display
    ;Return
    ; draws line for time writing
    GUICtrlSetGraphic($graph, $GUI_GR_MOVE, $x1 + 2, $y1 + 2)
    GUICtrlSetGraphic($graph, $GUI_GR_LINE, $x2 + 2, $y2 + 2)
EndFunc   ;==>_line
;#ce
Func _setColorAndPenForWrite($char, $type)
    ; sets color and pen for next line in time writing, based on '0' or '1' in the DigChar array
    If $char = "1"  Then;7 Segment display ON=1 or OFF=0
        If $type = "Alarm"  Then
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_COLOR, 0xCCCCCC, 0xCCCCCC)
        ElseIf $type = "Timer" Then
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_COLOR, 0x00ff00, 0x00ff00);ct - Bright Green RGB
        Else
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_COLOR, 0xEE0000, 0xEE0000)
        EndIf
    Else
        If $type = "Alarm"  Then
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_COLOR, 0x222222, 0x222222)
        ElseIf $type = "Timer" Then;ct
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_COLOR, 0x002200, 0x002200);ct - Lite Green RGB
        Else
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_COLOR, 0x330000, 0x330000)
        EndIf
    EndIf
EndFunc   ;==>_setColorAndPenForWrite

Func _drawSec()
    Return
    ; draws circle seconds indicator
    $aXY = _getXY(@SEC, 240)
    GUICtrlDelete($SecSquare)
    $SecSquare = GUICtrlCreateGraphic(350 + $aXY[0] - 8, 350 + $aXY[1] - 8, 16, 16)
    GUICtrlSetGraphic($SecSquare, $GUI_GR_COLOR, 0x0000FF, 0x0000FF)
    GUICtrlSetGraphic($SecSquare, $GUI_GR_ELLIPSE, 0, 0, 16, 16)
EndFunc   ;==>_drawSec

Func _getXY($sec, $hypo)
    ; returns array with X,Y coordinates for the seconds points for $sec seconds, with $hypo(tenuse) distance from center
    Dim $result[2]
    Local $pi = 3.14159265358979
    Local $degToRad = $pi / 180
    Local $degrees = $sec * 6 - 90
    Local $x = Cos($degrees * $degToRad) * $hypo
    Local $y = Sin($degrees * $degToRad) * $hypo
    $result[0] = $x
    $result[1] = $y
    Return $result
EndFunc   ;==>_getXY


Func _initDigChar(ByRef $aDigChar)
    ; define leds for digital numbers: 1 or 0 for leds on/off in 7-led digital clock characters
    $aDigChar[0] = "1110111"
    $aDigChar[1] = "0000011"
    $aDigChar[2] = "0111110"
    $aDigChar[3] = "0011111"
    $aDigChar[4] = "1001011"
    $aDigChar[5] = "1011101"
    $aDigChar[6] = "1111101"
    $aDigChar[7] = "0010011"
    $aDigChar[8] = "1111111"
    $aDigChar[9] = "1011111"
    $aDigChar[10] = "1111011" ; A
    $aDigChar[11] = "1100100" ; L
    $aDigChar[12] = "0001000" ; -
    $aDigChar[13] = "1110100" ;C
EndFunc   ;==>_initDigChar

M23

1 person likes this

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

Share this post


Link to post
Share on other sites

Melba it has been said by many before me, but I'm compelled to say it again, you're the Jedi of code possibly part Vulcan(adept logic)....lol Thanks Mate

Share this post


Link to post
Share on other sites

VenusProject2,

Glad I could help. Live long and prosper.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • Lights_On
      By Lights_On
      Hi all,

      I am having a little trouble with ‘GUICtrlSetResizing’ an hoping someone could push me in the direction of best practice.

      I have a basic GUI created to a set size with the enabled abilities to resize it:

      GUICreate("Test", 500, 450, -1, -1, BitOR($WS_SIZEBOX, $WS_MAXIMIZEBOX, $WS_MINIMIZEBOX))

      Inside this I have an image and label:

      GUICtrlCreateLabel($Image1StampInfo, 10, 395, 480, 20, $SS_CENTER) GUICtrlCreatePic($TheImage, 25, 25, 450, 350)

      Using:

      Case ($GUI_EVENT_MAXIMIZE or $GUI_EVENT_RESTORE or $GUI_EVENT_RESIZED)

      I activate:

       
      GUICtrlSetResizing($TheImageBox, $GUI_DOCKAUTO) GUICtrlSetResizing($Image1Stamp, $GUI_DOCKAUTO)

      This works fine with the image but not with the label – the label after a bit of resizing seems to get stuck in different places in the GUI as if the $GUI_DOCKAUTO has not worked properly.

      So 2 questions if I may. 

      1)    Have I used $GUI_DOCKAUTO incorrectly for use with lables?

      2)    I am happy to manually set new sizes dynamically but how? I can get the size of the window with ‘WinGetPos()’ but how do I set new size parameters for the ‘label’ and ‘image’?

      Thank you in advance.

    • FrancescoDiMuro
      By FrancescoDiMuro
      Good evening guys ( almost good night here in Italy )  
      How are you? Hop you're fine  
      I'm trying to do a Login Form ( I did, but I'm missing something in the management ), that allows the user to login when the script is launched, and, when the main GUI is opened, the user can Logout and Login with another username and password.
      The username and password "checking" I do is done by a text file, which in there are username and password, crypted through _Crypt_EncryptData().
      The "issue" I'm having at the moment, is to manage the Login form when the user hasn't already done the login, and so, the main GUI is not visible, but is created...
      I create the main GUI after the Login form... I tried with WinActive, WinGetState, but nothing changed ( even at the first Login, the script says ( through a MsgBox ) that the Win does exists ( or is active... ) and, as I want, it is not shown again...

      I really don't know If I missed something, or, I don't know...
      I'm going crazy for this thing...
      If someone could help me, I'd really appreaciate it!
      Thanks for the reading
      #Region ### START Koda GUI section ### Form=C:\Users\Portatile-60\Documents\Documenti Lavoro\AutoIt\Gestione_Magazzino_v2\form_Login.kxf Global $form_Login = GUICreate("Effettua il Login per continuare:", 405, 120, @DesktopWidth/2 - 202.5, @DesktopHeight/2 - 150) ; 302, 218 GUISetOnEvent($GUI_EVENT_CLOSE, "GUIDeleteLogin") Global $combo_Username = GUICtrlCreateCombo("Di Muro Francesco", 104, 64, 217, 25) GUICtrlSetFont(-1, 10, 400, 0, "Arial") GUICtrlSetData($combo_Username, "somedata") Global $input_Password = GUICtrlCreateInput("", 104, 89, 217, 25, BitOR($GUI_SS_DEFAULT_INPUT,$ES_PASSWORD)) GUICtrlSetFont(-1, 10, 400, 0, "Arial") $button_VerificaDati = GUICtrlCreateButton("", 328, 66, 42, 42, $BS_ICON) GUICtrlSetImage(-1, "C:\Users\Portatile-60\Documents\Documenti Lavoro\AutoIt\Gestione_Magazzino_v2\Icone\icon_check.ico", -1) GUICtrlSetOnEvent($button_VerificaDati, "CheckLogin") $label_Titolo = GUICtrlCreateLabel("Login", 167, 14, 71, 33) GUICtrlSetFont(-1, 18, 800, 0, "Arial") $label_Username = GUICtrlCreateLabel("Username :", 24, 64, 76, 20) GUICtrlSetFont(-1, 10, 800, 0, "Arial") $label_Password = GUICtrlCreateLabel("Password :", 24, 89, 73, 20) GUICtrlSetFont(-1, 10, 800, 0, "Arial") #EndRegion ### END Koda GUI section ### Func CheckLogin() Local $sUsername = GUICtrlRead($combo_Username) Local $sPassword = GUICtrlRead($input_Password) MsgBox($MB_ICONINFORMATION, "", "Username: " & $sUsername & @CRLF & "Password: " & $sPassword) Local $sFileUtenti = @ScriptDir & "\utenti.txt" If @error Then MsgBox($MB_ICONERROR, "Errore!", "Errore durante la lettura del file!") Exit Else Local $hFileUtenti = FileOpen($sFileUtenti, $FO_READ) If @error Then MsgBox($MB_ICONERROR, "Errore!", "Errore durante l'apertura del file " & $sFileUtenti & "." & @CRLF & "Errore: " & @error) Else Local $sDatiUtente, $aDatiUtente Local $bUtenteTrovato = False Local $iLinea = 1 Local $sControlloWin = "" Local $sWin = WinGetState($form_GestioneMagazzino) MsgBox($MB_ICONINFORMATION, "", $sWin) If @error Then MsgBox($MB_ICONERROR, "Errore!", "Errore durante la verifica della GUI attiva." & @CRLF & "Errore: " & @error) EndIf If($sWin == 5) Then MsgBox($MB_ICONINFORMATION, "", "La GUI esiste!") Do $sDatiUtente = FileReadLine($hFileUtenti, $iLinea) $aDatiUtente = StringSplit($sDatiUtente, "|", $STR_NOCOUNT) If(BinaryToString(_Crypt_DecryptData($aDatiUtente[0], "CRYPT", $CALG_RC4)) = $sUsername And BinaryToString(_Crypt_DecryptData($aDatiUtente[1], "CRYPT", $CALG_RC4)) = $sPassword) Then $sControlloWin = "ESISTE" $bUtenteTrovato = True ExitLoop Else $iLinea+=1 If($sDatiUtente = "" And $bUtenteTrovato = False) Then MsgBox($MB_ICONWARNING, "Attenzione!", "Username o Password errati.") ExitLoop EndIf EndIf Until $bUtenteTrovato = True Else MsgBox($MB_ICONINFORMATION, "", "La GUI esiste!") Do $sDatiUtente = FileReadLine($hFileUtenti, $iLinea) $aDatiUtente = StringSplit($sDatiUtente, "|", $STR_NOCOUNT) If(BinaryToString(_Crypt_DecryptData($aDatiUtente[0], "CRYPT", $CALG_RC4)) = $sUsername And BinaryToString(_Crypt_DecryptData($aDatiUtente[1], "CRYPT", $CALG_RC4)) = $sPassword) Then $sControlloWin = "NON ESISTE" $bUtenteTrovato = True ExitLoop Else $iLinea+=1 If($sDatiUtente = "" And $bUtenteTrovato = False) Then MsgBox($MB_ICONWARNING, "Attenzione!", "Username o Password errati.") ExitLoop EndIf EndIf Until $bUtenteTrovato = True EndIf If($sControlloWin = "ESISTE") Then MsgBox($MB_ICONINFORMATION, "Login effettuato!", "Hai effettuato l'accesso come: " & @CRLF & $sUsername & ".") ; Setta come "non-cliccabile" il bottone di Login GUICtrlSetState($button_Login, $GUI_DISABLE) GUICtrlSetState($button_VisualizzaGiacenze, $GUI_ENABLE) GUICtrlSetState($button_AggiungiProdotto, $GUI_ENABLE) GUICtrlSetState($button_PrelevaProdotto, $GUI_ENABLE) GUICtrlSetState($button_RicercaProdotto, $GUI_ENABLE) GUICtrlSetState($button_CreaDDT, $GUI_ENABLE) GUICtrlSetState($button_MostraGiacenzeAZero, $GUI_ENABLE) GUICtrlSetState($combo_Magazzino, $GUI_ENABLE) GUICtrlSetState($button_Logout, $GUI_ENABLE) ; Setta come "non-cliccabile" il bottone di Login GUICtrlSetState($button_Login, $GUI_DISABLE) ; Setta l'utente che ha effettuato l'accesso nella label $label_CaptionUtente GUICtrlSetData($label_CaptionUtente, $sUsername) ; "Distruggi" la GUI Login GUIDelete($form_Login) FileClose($hFileUtenti) Else MsgBox($MB_ICONINFORMATION, "", "La GUI non esiste!") MsgBox($MB_ICONINFORMATION, "Login effettuato!", "Hai effettuato l'accesso come: " & @CRLF & $sUsername & ".") ; Mostra la GUI Principale GUISetState(@SW_SHOW, $form_GestioneMagazzino) ; Setta come "non-cliccabile" il bottone di Login GUICtrlSetState($button_Login, $GUI_DISABLE) ; Setta l'utente che ha effettuato l'accesso nella label $label_CaptionUtente GUICtrlSetData($label_CaptionUtente, $sUsername) ; "Distruggi" la GUI Login GUIDelete($form_Login) FileClose($hFileUtenti) EndIf EndIf EndIf EndFunc Func Logout() GUICtrlSetData($label_CaptionUtente, "") MsgBox($MB_ICONINFORMATION, "Logout effettuato!", "Effettua nuovamente il Login per utilizzare il programma.") ; Disabilita tutti i bottoni della GUI Principale GUICtrlSetState($button_VisualizzaGiacenze, $GUI_DISABLE) GUICtrlSetState($button_AggiungiProdotto, $GUI_DISABLE) GUICtrlSetState($button_PrelevaProdotto, $GUI_DISABLE) GUICtrlSetState($button_RicercaProdotto, $GUI_DISABLE) GUICtrlSetState($button_CreaDDT, $GUI_DISABLE) GUICtrlSetState($button_MostraGiacenzeAZero, $GUI_DISABLE) GUICtrlSetState($combo_Magazzino, $GUI_DISABLE) GUICtrlSetState($button_Logout, $GUI_DISABLE) ; Abilita il Login GUICtrlSetState($button_Login, $GUI_ENABLE) EndFunc EDIT:
      Solved, making an "integrated" Login form... 
    • AnonymousX
      By AnonymousX
      Hello, 
      I'm wondering if it is possible to read a radio button off a GUI running by another program? 
      Someone created these Outlook emails that when open appear to be in a GUI format. I could easily come up with a way of navigating these fields by using tab inputs, and then copying specific fields that I need. However there is a spot on the form that has 4 choices of radio buttons, asking for what the status of the task is, and I have no idea how to store which one of these was pressed. 
      End game is to be able to go through thousands of these forms, take input from specific fields from this GUI form in outlook and copy into cells in an excel spreadsheet. I believe I could create a script to do everything I need, if I could just obtain the value from which radio button was pressed.
      Any advice on how to obtain which radio button was press in this outlook form would be appreciated.
      Thanks,
      If I knew VBA better Outlook might have its own functions for figuring this out.
       
      Example:

      In this example I'd want to be able to know that the 2nd or Assigned radio button was selected. Only 1 button is able to be selected at a time. I'm assuming the way to do this would be to tab through the form get to the first box and then run some command to check if pressed then if no, keep checking till I find which of the 4 were pressed.
    • FrancescoDiMuro
      By FrancescoDiMuro
      Good morning guys
      How are you? Hope you're fine
      I'm doing some field checking...
      Can you suggest me something? Something like: If the user doesn't prompt anything in a field, MsgBox and focus on the "blank" field, else, keep up with the script.
      I thought on a nested If...Else, but I have something like 10+ edit to control...
      Thanks guys! 
      EDIT:
      And I would like to know either how to retrieve all listview item ( 2 columns ) from a ListView...
      Column A|Column B
      abcd         | 1234
      bcda         | 1432
      How can I retrieve an array with abcd|1234|bcda|1432 ?
      Thanks  
       
    • triodz
      By triodz
      I want the number in a file to be overwritten with the next number up each time a button is pressed. 
      So it is pressed once, the number '1' is written to the file. It is pressed again and the number '2' overwrites the first number.
      At the moment I get the number 1 written, but can't get it to overwrite. What I have so far:
      #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <FileConstants.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #Region ### START Koda GUI section ### Form=C:\Users\soulf\Desktop\CalcGui\RLCalc.kxf $Form1 = GUICreate("Form1", 615, 437, 426, 141) $One = GUICtrlCreateButton("1", 32, 72, 25, 25) GUICtrlSetBkColor(-1, 0xFF0000) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### Func First ()     $fPath = "C:\temp\First.txt"     $fOpen = FileOpen ($fPath, 2)     $Counter = FileReadLine ($fpath)     $counter = $counter + 1     $fWrite = filewriteline ($fPath, $counter)     FileClose ($fpath) EndFunc While 1     $nMsg = GUIGetMsg()     Switch $nMsg         Case $GUI_EVENT_CLOSE             Exit         Case $One             Call ("First")     EndSwitch WEnd I tried a Do Until statement, but that just puts the numbers 1 to 5 in the file.
      Any help would be greatly appreciated!