Jump to content

howto: colored layer over updating EDIT control

Recommended Posts



I'm trying to create a console reader. All is working but I have a problem with the look. I want the line numbers with another backgroundcolor in silver. I made this with a small silver label. The edit control over the label has a transparent background.

But if I start the prog then i can see how the line numbers wipe the silver background off. And if I click into the Edit then the silver label disappears completely.

#include <WindowsConstants.au3>
#include <GUIConstantsEx.au3>
#include <ColorConstants.au3>
#include <StaticConstants.au3>
#include <GuiEdit.au3>

Opt("GUIOnEventMode", 1)

Global $g_iZaehler = 0

Global $g_hGUI = GUICreate("Console: StdoutRead" , 800, 800, -1, -1, $WS_OVERLAPPEDWINDOW + $WS_CLIPCHILDREN, $WS_EX_ACCEPTFILES)
GUISetOnEvent($GUI_EVENT_CLOSE, "_Exit")

Global $text = GUICtrlCreateEdit("",10,30,780,760, $ES_AUTOVSCROLL + $WS_VSCROLL + $ES_READONLY + $ES_NOHIDESEL)
GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console")
GUICtrlSetResizing(-1, $GUI_DOCKBORDERS)

Global $g_LaZeilen = GUICtrlCreateLabel("Zeilen: " & StringFormat("% 5d", $g_iZaehler), 680, 10, 100, 9, $SS_LEFTNOWORDWRAP)
GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console")

Global $g_hCbFreeze = GUICtrlCreateCheckbox("&Freeze", 13, 5, 90)
GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console")
GUICtrlSetResizing(-1, $GUI_DOCKALL)

GUICtrlCreateLabel("", 11, 31, 42, 758) ; soll die Ziffern andersfarbig hinterlegen
GUICtrlSetBkColor(-1, $COLOR_SILVER)


Global $sText = StringFormat("% 5d", $g_iZaehler) & @CRLF
_GUICtrlEdit_AppendText($text, $sText)

While 1
    $g_iZaehler += 1
    $sText = StringFormat("% 5d", $g_iZaehler) & @CRLF
    _GUICtrlEdit_AppendText($text, $sText)

Func _Exit()

Do you have any suggestions.

Regards, Conrad

Edited by Simpel

SciTE4AutoIt =   AutoIt =   AutoItX64 = 0   OS = Win7Pro SP1   OSArch = X64   Language = 0407/german
H:\...\AutoIt3\SciTE     H:\...\AutoIt3      H:\...\AutoIt3\Include     (H:\ = Network Drive)

   88x31.png  Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • aiter
      By aiter
      I am trying to get an image showing through a edit box.  I am only successful in making the edit box totally transparent
      #include-once #include <GUIConstants.au3> #include <GDIPlus.au3> #include <WinAPISys.au3> #include <colorconstants.au3> ;WS_EX_TRANSPARENT $gui = GUICreate("", 1000, 800, -1, -1, -1 , $WS_EX_LAYERED) ; use layered to get _winapi_setlay... to work $pic = GUICtrlCreatePic("c:\Program Files (x86)\AutoIt3\Examples\GUI\Merlin.gif", 0,0,1000, 800) GUICtrlSetState(-1, $GUI_DISABLE) $edit = GUICtrlCreateEdit("First line" & @CRLF, 176, 32,200,600) GUICtrlSetBkColor(-1,$COLOR_YELLOW) _WinAPI_SetLayeredWindowAttributes($gui,$COLOR_YELLOW,199) ; 199 is alpha (transparency level) GUISetState(@SW_SHOW,$gui) While 1 $msg = GuiGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case Else EndSelect WEnd Exit Func Terminate() exit(0) EndFunc So I am making the edit box's background yellow then using the _WINAPI_SetLayeredWIndowAttributes command to make the yellow disappear (which it does), but the alpha level is supposed to give a bit of opaqueness to it, but its not, just making it totally transparent.  The alpha level is in fact affecting the window itself and not the edit box. I only want the edit box to be partially transparent.
      Help appreciated.
    • ISI360
      By ISI360
      I am searching for a way to display a transparent image (or Icon) over an Button. And the image should always stay on top.

      Here is what i have so far:
      At script start the picture is over the button..but if you move the mouse over the button it overlaps the image.
      And if i add $GUI_ONTOP to the picture, the transparency is gone

      Maybe someone has an idea..

      Thanks in advance!
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WinAPIIcons.au3> #include <WinAPIShellEx.au3> GUICreate("GUI", 300, 300) $hbutton = GUICtrlCreateButton("This is a button", 20, 40, 150, 30,$WS_CLIPSIBLINGS) $hpic = GUICtrlCreatePic("", 10, 10, 128, 128) _SetIconAlpha($hpic,"shell32.dll", 12,128,128) GUICtrlSetState(-1, $GUI_DISABLE) ;~ GUICtrlSetState(-1,$GUI_ONTOP) ;If you uncomment this..the picture is on top...but the transparency is gone :( GUISetState() While 1 $Msg = GUIGetMsg() If $Msg = $GUI_EVENT_CLOSE Then ExitLoop WEnd Func _SetIconAlpha($hWnd, $sIcon, $iIndex, $iWidth, $iHeight) If Not IsHWnd($hWnd) Then $hWnd = GUICtrlGetHandle($hWnd) If $hWnd = 0 Then Return SetError(1, 0, 0) EndIf EndIf If $iIndex <> 0 Then $iIndex = $iIndex - 1 Local $hIcon = _WinAPI_ShellExtractIcon($sIcon, $iIndex, $iWidth, $iHeight) If $hIcon = 0 Then Return SetError(1, 0, 0) EndIf Local $hBitmap, $hObj, $hDC, $hMem, $hSv $hDC = _WinAPI_GetDC($hWnd) $hMem = _WinAPI_CreateCompatibleDC($hDC) $hBitmap = _WinAPI_CreateCompatibleBitmap($hDC, $iWidth, $iHeight) $hSv = _WinAPI_SelectObject($hMem, $hBitmap) _WinAPI_DrawIconEx($hMem, 0, 0, $hIcon, $iWidth, $iHeight, 0, 0, 2) _WinAPI_ReleaseDC($hWnd, $hDC) _WinAPI_SelectObject($hMem, $hSv) _WinAPI_DeleteDC($hMem) _WinAPI_DestroyIcon($hIcon) _WinAPI_DeleteObject(_SendMessage($hWnd, 0x0172, 0, 0)) _SendMessage($hWnd, 0x0172, 0, $hBitmap) $hObj = _SendMessage($hWnd, 0x0173) If $hObj <> $hBitmap Then _WinAPI_DeleteObject($hBitmap) EndIf Return 1 EndFunc ;==>_SetIconAlpha  
    • rudi
      By rudi
      very propably this has been asked before, well, I miss the thread(s) ...
      Is there a command line switch to tell the SciTE setup EXE to install silently ("/S") *AND* to end up with "edit" (instead of "run") as system wide default action for *.au3 files?

      As it can be done with the config tool:
      Regards, Rudi.
    • Jibberish
      By Jibberish
      I am working on a Video Player Test Script. I am reading a text file into a 3d array to be displayed in a GUI.
      Array Content:
      [x][1]UsageCount -> Up to a 4 digit number
      [x][2]EnableUsageCount (True/False)
      In the GUI the user can check the filename box, edit the number of usages and check EnableUsageCount to turn on the UsageCount control using the UsageCount number for the maximum number of plays.
      To make this easier to deal with I have removed the EnableUsageCount section, and am just concentrating on getting a method to put the edited (or unchanged) UsageCount in the array. Currently nothing is read into the array, due to my using the wrong method in the Case statement.
      Here are code snippets of what I am trying to do:
      ; Snippets from script ; I read the text file at the bottom and put the .mp4 filenames in $aManifest[x][0] and UsageCount in $aManifest[x][1] ; Then I create a GUI to display the .mp4 filenames with checkboxes and the UsageCount to the right. UsageCount is editable by the user. ; If the filename is checked, I want to read the filename into $aCheckedVideos[x][0] and the updated UsageCount in $aCheckedVideos[x][1] ; The GUICtrlRead($aVideoName[$i]) with Case $GUI_CHECKED & UNCHECKED works for the checkboxes ; This section puts the filenames in the GUI with a checkbox For $i = 0 to $iMMCount Step 1 $sMP4Text = $aManifest[$i][0] $iMP4Length = StringLen($sMP4Text) $aVideoName[$i] = GUICtrlCreateCheckbox($sMP4Text,$iLeft, $iTop) $iTop += 30 Next ; This section reads numbers from the Manifest array, and I want to be able to change the number and have them saved. ; So the Case $GUI_CHECKED & UNCHECKED won't work here, and I can't figure out what I should be doing here. For $i = 0 to $iMMCount Step 1 $sUsageText = $aManifest[$i][1] $aUsageCount[$i] = GUICtrlCreateInput($sUsageText,$iLeft, $iTop, 50,18, $GUI_DOCKAUTO) GUICtrlSetPos($aUsageCount[$i],200) $iTop += 30 Next While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $idCloseGUI For $i = 0 To $iMMNewCount Step 1 Switch GUICtrlRead($aVideoName[$i]) Case $GUI_CHECKED $aCheckedVideos[$i][0] = $aManifest[$i][0] ; If checked, I put the results into a two D array Case $GUI_UNCHECKED ; where Video Name is $aCheckedVideos[x][0] EndSwitch Switch GUICtrlRead($aUsageCounter[$i]) Case $GUI_CHECKED $aCheckedVideos[$i][1] = $aUsageCount[$i] ;I want to put the text (numbers) in $aCheckedVideos[x][1] Case $GUI_UNCHECKED ;but what is returned is blank, probably due to EndSwitch ; $GUI_CHECKED being the wrong thing. Next ExitLoop EndSwitch WEnd ;The txt file I'm reading has the following: ;~ /** Title #1: Big Buck Bunny 1080p **/ ;~ "Name": "Big Buck Bunny", ;~ "URI": "..\\MediaFiles\\bbb_1080_60s.mp4", ;~ "UsageCount": 9999, ;~ "URI": "..\\MediaFiles\\bbb_1080_60s_enc1.mp4", ;~ "UsageCount": 45, ;~ "URI": "..\\MediaFiles\\bbb_1080_60s_enc1.mp4", ;~ "UsageCount": 2, ;~ /** Title #2: Tears of Steel 4K **/ ;~ "Name": "Tears of Steel 4K", ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC.mp4", ;~ "UsageCount": 9876, ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC_enc2.mp4", ;~ "UsageCount": 0, ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC_enc2.mp4", ;~ "UsageCount": 5, I am certain that the section
                          Switch GUICtrlRead($aUsageCounter[$i])
                              Case $GUI_CHECKED
                                  $aCheckedVideos[$i][1] = $aUsageCount[$i]    ;I want to put the text (numbers) in $aCheckedVideos[x][1]
                              Case $GUI_UNCHECKED                                ;but what is returned is blank, probably due to
                          EndSwitch                                            ; $GUI_CHECKED being the wrong thing.

      is wrong, and this is what I am looking for help with. Instead of $GUI_CHECKED what should I be looking for?
      The worst part of this is I had this working late last night, and then lost my changes and cannot for the life of me remember how I had this working.
      Help is truly appreciated!
    • Skeletor
      By Skeletor
      Hi All,
      I know many newbies search for this feature.
      I decided to share this piece of code with everyone.
      Basically its a "splash screen" that has a transparent image.
      In a nutshell - Gui with a transparent gif.
      Download attachment....
      Splash Screen GUI.zip

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.