olmanRvr

manipulate controls' state basing on another control's state

5 posts in this topic

I want to show or hide a edit control depending if a radio button is checked or not.The following Autoit code appears semantically ok but not working.Can anyone please help?

thanks

olmar

While 1
   $nMsg = GUIGetMsg()
   $isradioChk=GUICtrlRead($radio_AbsP);checked=1,not checked=4
   Switch $nMsg
    Case $GUI_EVENT_CLOSE
        Exit
    Case $isradioChk
         If $isradioChk<==1 Then
            GUICtrlSetState($edit_AbsP,$GUI_SHOW)
            GUICtrlSetState($edit_RelP,$GUI_HIDE)
         Else
            GUICtrlSetState($edit_AbsP,$GUI_HIDE)
            GUICtrlSetState($edit_RelP,$GUI_SHOW)
        EndIf
    Case $usrPrefs

    EndSwitch
WEnd

 

Share this post


Link to post
Share on other sites



You where almost there.

This will get the job done for you.

While 1
   $nMsg = GUIGetMsg()
   Switch $nMsg
    Case $GUI_EVENT_CLOSE
        Exit
    Case $radio_AbsP
        $isradioChk=GUICtrlRead($radio_AbsP);checked=1,not checked=4
         If $isradioChk = 1 Then
            GUICtrlSetState($edit_AbsP,$GUI_SHOW)
            GUICtrlSetState($edit_RelP,$GUI_HIDE)
         Else
            GUICtrlSetState($edit_AbsP,$GUI_HIDE)
            GUICtrlSetState($edit_RelP,$GUI_SHOW)
        EndIf
    Case $usrPrefs

    EndSwitch
WEnd

 


"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the universe trying to build bigger and better idiots. So far, the universe is winning."- Rick Cook

Share this post


Link to post
Share on other sites

#3 ·  Posted (edited)

Hi Bowmore,

Thanks for the quick reply.Tried out your code but still both the edit ctrls visible as before.Below is the full code including the code you have proposed.Please have a look.

thanks

olmar

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=e:\projectbzt\usrprefs.kxf
$usrPrefs = GUICreate("User Preferences", 531, 271, 317, 119)
GUISetBkColor(0xD6D8C7)
$Group1 = GUICtrlCreateGroup("Group1", 19, 7, 242, 68)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$radio_AbsP = GUICtrlCreateRadio("Abselute Value", 83, 24, 105, 17, BitOR($GUI_SS_DEFAULT_RADIO,$BS_RIGHTBUTTON,$BS_RIGHT))
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x0000FF)
$radio_RelPos = GUICtrlCreateRadio("Relative Value", 68, 47, 120, 17, BitOR($GUI_SS_DEFAULT_RADIO,$BS_RIGHTBUTTON,$BS_RIGHT))
GUICtrlSetState(-1, $GUI_CHECKED)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x0000FF)
$edit_AbsP = GUICtrlCreateEdit("", 190, 21, 65, 21, $ES_CENTER)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetBkColor(-1, 0xC4C7AD)
$edit_RelP = GUICtrlCreateEdit("", 190, 45, 65, 22, $ES_CENTER)
GUICtrlSetData(-1, 100)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetBkColor(-1, 0xC4C7AD)
GUICtrlCreateGroup("", -99, -99, 1, 1)
GUISetState(@SW_SHOW)

#EndRegion ### END Koda GUI section ###

While 1
   $nMsg = GUIGetMsg()
   Switch $nMsg
    Case $GUI_EVENT_CLOSE
        Exit
    Case $radio_AbsP
        $isradioChk=GUICtrlRead($radio_AbsP);checked=1,not checked=4
         If $isradioChk = 1 Then
            GUICtrlSetState($edit_AbsP,$GUI_SHOW)
            GUICtrlSetState($edit_RelP,$GUI_HIDE)
         Else
            GUICtrlSetState($edit_AbsP,$GUI_HIDE)
            GUICtrlSetState($edit_RelP,$GUI_SHOW)
        EndIf
    Case $usrPrefs

    EndSwitch
WEnd

 

Edited by olmanRvr

Share this post


Link to post
Share on other sites

Only 1 of the checkboxes was being monitored in the message loop

 

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=e:\projectbzt\usrprefs.kxf
$usrPrefs = GUICreate("User Preferences", 531, 271, 317, 119)
GUISetBkColor(0xD6D8C7)
$Group1 = GUICtrlCreateGroup("Group1", 19, 7, 242, 68)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$radio_AbsP = GUICtrlCreateRadio("Abselute Value", 83, 24, 105, 17, BitOR($GUI_SS_DEFAULT_RADIO,$BS_RIGHTBUTTON,$BS_RIGHT))
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x0000FF)
$radio_RelPos = GUICtrlCreateRadio("Relative Value", 68, 47, 120, 17, BitOR($GUI_SS_DEFAULT_RADIO,$BS_RIGHTBUTTON,$BS_RIGHT))
GUICtrlSetState(-1, $GUI_CHECKED)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x0000FF)
$edit_AbsP = GUICtrlCreateEdit("", 190, 21, 65, 21, $ES_CENTER)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetBkColor(-1, 0xC4C7AD)
GUICtrlSetState($edit_AbsP,$GUI_HIDE) ;<=== as $radio_RelPos is initially checked, hide $edit_AbsP
$edit_RelP = GUICtrlCreateEdit("", 190, 45, 65, 22, $ES_CENTER)
GUICtrlSetData(-1, 100)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetBkColor(-1, 0xC4C7AD)
GUICtrlCreateGroup("", -99, -99, 1, 1)
GUISetState(@SW_SHOW)

#EndRegion ### END Koda GUI section ###

While 1
   $nMsg = GUIGetMsg()
   Switch $nMsg
    Case $GUI_EVENT_CLOSE
        Exit
    Case $radio_AbsP,$radio_RelPos ;<== check state when either checkbox is changed
        $isradioChk=GUICtrlRead($radio_AbsP);checked=1,not checked=4
         If $isradioChk = 1 Then
            GUICtrlSetState($edit_AbsP,$GUI_SHOW)
            GUICtrlSetState($edit_RelP,$GUI_HIDE)
         Else
            GUICtrlSetState($edit_AbsP,$GUI_HIDE)
            GUICtrlSetState($edit_RelP,$GUI_SHOW)
        EndIf
    Case $usrPrefs

    EndSwitch
WEnd

 


"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the universe trying to build bigger and better idiots. So far, the universe is winning."- Rick Cook

Share this post


Link to post
Share on other sites

#5 ·  Posted (edited)

Thanks Very much Bowmore!!

 Now it is working fine.Issue is SOLVED.For others having similar issue here is the correct code.

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=e:\projectbzt\usrprefs.kxf
$usrPrefs = GUICreate("User Preferences", 531, 271, 317, 119)
GUISetBkColor(0xD6D8C7)
$Group1 = GUICtrlCreateGroup("Group1", 19, 7, 242, 68)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$radio_AbsP = GUICtrlCreateRadio("Abselute Value", 83, 24, 105, 17)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x0000FF)
$radio_RelP = GUICtrlCreateRadio("Relative Value", 68, 47, 120, 17)
GUICtrlSetState(-1, $GUI_CHECKED)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x0000FF)
$edit_AbsP = GUICtrlCreateEdit("", 190, 21, 65, 21, $ES_CENTER)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetBkColor(-1, 0xC4C7AD)
GUICtrlSetState(-1,$GUI_HIDE)
$edit_RelP = GUICtrlCreateEdit("", 190, 45, 65, 22, $ES_CENTER)
GUICtrlSetData(-1, 100)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
GUICtrlSetBkColor(-1, 0xC4C7AD)
GUICtrlCreateGroup("", -99, -99, 1, 1)
GUISetState(@SW_SHOW)

#EndRegion ### END Koda GUI section ###

While 1
   $nMsg = GUIGetMsg()
   Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $radio_AbsP,$radio_RelP
            $isradioAbsChk=GUICtrlRead($radio_AbsP);checked=1,not checked=4
            $isradioRelChk=GUICtrlRead($radio_RelP);checked=1,not checked=4

             If $isradioAbsChk = 1 Then
                 GUICtrlSetState($edit_AbsP,$GUI_SHOW)
                 GUICtrlSetState($edit_RelP,$GUI_HIDE)
             Else
                  GUICtrlSetState($edit_AbsP,$GUI_HIDE)
                  GUICtrlSetState($edit_RelP,$GUI_SHOW)
            EndIf
    EndSwitch
WEnd

 

Edited by olmanRvr

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • IAMK
      By IAMK
      Hello,
       
      I have a script which uses a GUI with two buttons. It gets shown and hidden., and pressing the buttons (including their hotkeys) highlights the button, making you able to press enter the next time.
      However, I don't want that.
       
      I've tried using WinActivate() to make enter do things on another program, but the enter is still tied to the AutoIT GUI (which still has the button highlighted).
       
      Here's the important part of my code:
      $MY_GUI = GUICreate("Check.exe", 400, 300, ((@DesktopWidth / 2) - 200), -500) WinSetOnTop($MY_GUI, "", 1) ;Keeps the window on the top. $Button1 = GUICtrlCreateButton("Pass (Ctrl+P)", 40, 250, 120, 40, $WS_GROUP) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") $Button2 = GUICtrlCreateButton("Fail (Ctrl+F)", 240, 250, 120, 40, $WS_GROUP) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") $GUIText = GUICtrlCreateLabel("", 20, 10, 360, 230) GUICtrlSetFont(-1, 13, 400, 0, "MS Sans Serif") GUICtrlSetData($GUIText, Execute($stepMessage[$step])) $showGUI = "True" GUISetState(@SW_SHOW) While($showGUI = "True") $buttonPressed = GUIGetMsg() Switch $buttonPressed Case $Button1 ;Pass $pass = "True" $buttonPressed = 0 $showGUI = "False" GUISetState(@SW_HIDE) Case $Button2 ;Fail $buttonPressed = 0 $showGUI = "False" GUISetState(@SW_HIDE) While($message = "") $message = InputBox("Check.exe", "Please enter the reason the step failed." & @CRLF, "", "", 300, 200, ((@DesktopWidth / 2) - 150), -400) WEnd Return $message EndSwitch WEnd Local $pass = "False" ;Whether "Pass" or "Fail" was pressed. Local $failLog = xxxfunc($pass) ;Returns a message to log if the step failed. ##THIS CALLS THE CODE SNIPPET ABOVE## FileWrite($file, _Now() & ": Step " & $step & getStatus($pass) & "and took " & Ceiling(TimerDiff($timer) / 1000) & " seconds." & @CRLF) If($failLog <> "") Then FileWrite($file, "Logged comment: " & $failLog & @CRLF) EndIf WinActivate("[TITLE:ProgramName]") ;Hotkeys: HotKeySet("^{p}", "pressPass") HotKeySet("^{f}", "pressFail") Func pressPass() $buttonPressed = $Button1 EndFunc Func pressFail() $buttonPressed = $Button2 EndFunc  
      The GUI's button/hotkey pressing works correctly.
      The same WinActivate code works in another script of mine.
      Together, WinActivate is not take "Active" away from the GUI's last-pressed button. How do I fix this?
       
      Thank you in advance.
    • fatpig
      By fatpig
      Dear AutoIT Community.
      I am currently working on a program that will display lots of images in a scroll down GUI.
      I create the GUI based on the number of images, which works fine.
      But all images I place using GuiCtrlCreatePic above a threshold of around 32000 pixels (cant say exactly) are placed at negative locations and finally will reach 0 again
      and will then populate on top of the images placed there before.
      For $i = 1 To $Images[0] ; Get picture dimensions $hImage = _GDIPlus_ImageLoadFromFile($ImgRep & $Images[$i]) $iX = _GDIPlus_ImageGetWidth($hImage) $iY = _GDIPlus_ImageGetHeight($hImage) _GDIPlus_ImageDispose($hImage) ; Resize & place images in GUI $Pic[$i] = GUICtrlCreatePic($ImgRep & $Images[$i], $Spacer, Round($yPos, 0), $MaxImgWidth, $MaxImgWidth * ($iY / $iX)) $yPos = $yPos + $MaxImgWidth * ($iY / $iX) + $Spacer $log = $log & "|" & $yPos $currentlut = $Images[1] Next I have found a limit at 32767 pixels for some GUI elements when googling around.
      Can someone tell me how to circumvent that?
      thanks!
      cheers
      Felix
    • Shirdish_chakravarthi
      By Shirdish_chakravarthi
      Hello Guys this is my gui and i need the numeric value typed in the highlighted  inputbox. if this value is greater than 1 i need to perform some operations
      \
       
      Here is the summary about that field which i got from wininfo tool

      i tried writing the code as shown below.. but the msgbox is popping up empty value..when the same code is pasted under some button action i am able to access the value present in the field..but when placed alone as written in the attached script i am unable to fetch it... 

      here i am using the valu present in the field

      can you guys tell me what's wrong??? or how can i get that value?
       
      My_GUI.au3

    • Neonovaz
      By Neonovaz
      Hello
       
      Is there anyway to store word documents in Autoit GUI? For example I have a instruction sheet that I want to bundle up with the exe.

      So a user simply clicks the icon and the stored document will launch  (Something like how you can add objects like excel sheets in word documents )

      (I Know we can launch word files from script directory)

       
    • hemichallenger
      By hemichallenger
      Not sure if this is possible or if someone has already tackled this. Is it possible to embed PowerShell into a GUI? Autoit is great for quick function but sometime I need to run a command thru PowerShell. It be great to have PowerShell console embedded into the gui.