Jump to content
FrancescoDiMuro

Switch Input from Read-only to Editable

Recommended Posts

FrancescoDiMuro

Good morning :)
I'm working with a popup GUI, which shows some data, that is read-only display... On the event "click on a button", I'd like to change the style of the Input to Read-only to Editable...
Any suggestions? Thanks :D 


Click here to see my signature:

Spoiler

I will always thank you for the time you spent for me.
I'm here to ask, and from your response, I'd like to learn.
By my knowledge, I can help someone else, and "that someone" could help in turn another, and so on.

ALWAYS GOOD TO READ:

In case I am violating some pseudo Forum rule, or I am doing something wrong, I want let you know that I'm not doing this on purpose, and for this, I kindly ask you to send me a private message about the "bad content" I posted, in order to edit/remove it, and to not be warned wrongly.
Thanks in advance.

 

Share this post


Link to post
Share on other sites
Melba23

FrancescoDiMuro,

You use GUICtrlSetStyle to change the style of the input.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
FrancescoDiMuro

Hey @Melba23!
How are you? :)
Nice to hear you :)
Yes, I did know how to set a style for a GUI control, but, in this case, I don't know which style I have to set to the control in order to set the input editable ( from the previous state, when I create it, that is $ES_READONLY ).
 

$input_Codice = GUICtrlCreateInput($aDettagliArticolo[0], 73, 6, 161, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_READONLY))
GUICtrlSetState(-1, ;Here I should put a State, but I don't know which one is correct to let the $input_Codice editable )

 

Edited by FrancescoDiMuro

Click here to see my signature:

Spoiler

I will always thank you for the time you spent for me.
I'm here to ask, and from your response, I'd like to learn.
By my knowledge, I can help someone else, and "that someone" could help in turn another, and so on.

ALWAYS GOOD TO READ:

In case I am violating some pseudo Forum rule, or I am doing something wrong, I want let you know that I'm not doing this on purpose, and for this, I kindly ask you to send me a private message about the "bad content" I posted, in order to edit/remove it, and to not be warned wrongly.
Thanks in advance.

 

Share this post


Link to post
Share on other sites
Melba23

FrancescoDiMuro,

Setting a new style overwrites the existing style - as explained in the Setting Styles tutorial in the Wiki - so all you need do is set the default style only and the input will become editable. To reset the read-only style, you need to set the combined styles as you did when creating the control.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
FrancescoDiMuro

Hey @Melba23!
I forgot to tell you that I've just tried what you're telling to me, with:
 

GUICtrlSetState($input_Codice, $GUI_SS_DEFAULT_INPUT)

But, here it is what I obtain ( obviousely, the input is not editable :P )

Cattura_6.PNG


Click here to see my signature:

Spoiler

I will always thank you for the time you spent for me.
I'm here to ask, and from your response, I'd like to learn.
By my knowledge, I can help someone else, and "that someone" could help in turn another, and so on.

ALWAYS GOOD TO READ:

In case I am violating some pseudo Forum rule, or I am doing something wrong, I want let you know that I'm not doing this on purpose, and for this, I kindly ask you to send me a private message about the "bad content" I posted, in order to edit/remove it, and to not be warned wrongly.
Thanks in advance.

 

Share this post


Link to post
Share on other sites
Melba23
35 minutes ago, Melba23 said:

You use GUICtrlSetStyle to change the style of the input.

 

3 minutes ago, FrancescoDiMuro said:

 

GUICtrlSetState($input_Codice, $GUI_SS_DEFAULT_INPUT)

 

Spot the difference?

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
FrancescoDiMuro

Oh, dear!
Now I did! What a distraction!
Thanks for letting me know! 
Now it works like a charm :)
Have a wonderful day :D 


Click here to see my signature:

Spoiler

I will always thank you for the time you spent for me.
I'm here to ask, and from your response, I'd like to learn.
By my knowledge, I can help someone else, and "that someone" could help in turn another, and so on.

ALWAYS GOOD TO READ:

In case I am violating some pseudo Forum rule, or I am doing something wrong, I want let you know that I'm not doing this on purpose, and for this, I kindly ask you to send me a private message about the "bad content" I posted, in order to edit/remove it, and to not be warned wrongly.
Thanks in advance.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Bllee
      By Bllee
      every time i press "delete button" delete a line, but i can't add new line with info. the id line write normally but i can't change or add new info
      obs: looking at the "includes" one realizes that already tried of everything that knew
      my code
      #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <GUIListBox.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <GuiImageList.au3> #include <GuiListView.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <MsgBoxConstants.au3> #include <WinAPI.au3> #include <StringConstants.au3> #include <Array.au3> #include <GuiListBox.au3> #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 612, 480, 192, 154) $MenuItem1 = GUICtrlCreateMenu("&Arquivo") $MenuItem2 = GUICtrlCreateMenuItem("Salvar Ctrl+S", $MenuItem1, $SS_CENTER) $MenuItem4 = GUICtrlCreateMenuItem("Carregar Ctrl+O", $MenuItem1, $SS_CENTER) $MenuItem3 = GUICtrlCreateMenuItem("Salvar Como Shitft+Ctrl+S", $MenuItem1, $SS_CENTER) $Group1 = GUICtrlCreateGroup("", 21, 8, 569, 97, $SS_CENTER) $Input1 = GUICtrlCreateInput("ID COR", 122, 32, 97, 21, $SS_CENTER) $Input2 = GUICtrlCreateInput("REGIÃO", 138, 64, 249, 21, $SS_CENTER) $Input3 = GUICtrlCreateInput("Label", 264, 30, 121, 21, $SS_CENTER) $Label1 = GUICtrlCreateLabel("Label", 232, 32, 30, 17, $SS_CENTER) $Button1 = GUICtrlCreateButton("Capturar Cor", 42, 30, 75, 25, $SS_CENTER) $Button2 = GUICtrlCreateButton("Capturar Região", 42, 62, 91, 25, $SS_CENTER) $Button3 = GUICtrlCreateButton("ADD", 442, 24, 113, 33) $Button5 = GUICtrlCreateButton("Delet", 442, 64, 113, 33) $Group2 = GUICtrlCreateGroup("Editar ID selecionado", 8, 384, 601, 57, $SS_CENTER) $Input7 = GUICtrlCreateInput("ID", 10, 402, 40,21, $SS_CENTER) $Input4 = GUICtrlCreateInput("COR", 51, 402, 121, 21, $SS_CENTER) $Input5 = GUICtrlCreateInput("REGIÃO", 173, 402, 249, 21, $SS_CENTER) $Input6 = GUICtrlCreateInput("LABEL", 423, 402, 121, 21, $SS_CENTER) $Button4 = GUICtrlCreateButton("\/", 544, 400, 30, 25, $SS_CENTER) $Button6 = GUICtrlCreateButton("/\", 574, 400, 30, 25, $SS_CENTER) ; Add column Global $id = Int(0) $List1 = GUICtrlCreateListView("",5, 120, 601, 253, $SS_CENTER) _GUICtrlListView_AddColumn($List1, "ID",40) _GUICtrlListView_AddColumn($List1, "COR",100) _GUICtrlListView_AddColumn($List1, "COORDENADA",305) _GUICtrlListView_AddColumn($List1, "LABEL",150) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $MenuItem2 MsgBox($MB_SYSTEMMODAL, "ctrl + s", "Nothing Here",1) Case $MenuItem3 MsgBox($MB_SYSTEMMODAL, "shift+ctrl s", "Nothing Here",1) Case $MenuItem4 MsgBox($MB_SYSTEMMODAL, "ctrl + o", "Nothing Here",1) Case $Button1 MsgBox($MB_SYSTEMMODAL, "Capturar cor", "Aperte espaço para capturar a cor") GUICtrlSetData($Input1,MouseColor()) Case $Button2 MsgBox($MB_SYSTEMMODAL, "capturar região", "Aperte espaço para capturar a posição inicial") local $mouse = MouseGetPos() $x_init = $mouse[0] $y_init = $mouse[1] MsgBox($MB_SYSTEMMODAL, "capturar região", "Aperte espaço para capturar a posição final") local $mouse = MouseGetPos() $x_end = $mouse[0] $y_end = $mouse[1] GUICtrlSetData($Input2,$x_init&','&$y_init&' ; '&$x_end&','&$y_end) Case $Button3 _GUICtrlListView_AddItem($List1, $id, 1) ; id _GUICtrlListView_AddSubItem($List1, $id, GUICtrlRead($Input1), 1, 1) ;cor _GUICtrlListView_AddSubItem($List1, $id, GUICtrlRead($Input2), 2, 1) ;coordenada _GUICtrlListView_AddSubItem($List1, $id, GUICtrlRead($Input3), 3, 1) ;label $id= $id + 1 Case $Button4 $Item = _GUICtrlListView_GetSelectedIndices($List1) $Sid = _GUICtrlListView_GetItem($List1, Number($Item),0) $Scor = _GUICtrlListView_GetItem($List1, Number($Item),1) $Scord = _GUICtrlListView_GetItem($List1, Number($Item),2) $Slabel = _GUICtrlListView_GetItem($List1, Number($Item),3) ; get info GUICtrlSetData($Input7,$Sid[3]) GUICtrlSetData($Input4,$Scor[3]) GUICtrlSetData($Input5,$Scord[3]) GUICtrlSetData($Input6,$Slabel[3]) Case $Button5 _GUICtrlListView_DeleteItemsSelected($List1) Case $Button6 ; give back inf if GUICtrlRead($Input7) <> "ID" Then _GUICtrlListView_SetItem($List1, GUICtrlRead($Input4), GUICtrlRead($Input7),1) ;cor _GUICtrlListView_SetItem($List1, GUICtrlRead($Input5), GUICtrlRead($Input7),2) ;coordenada _GUICtrlListView_SetItem($List1, GUICtrlRead($Input6), GUICtrlRead($Input7),3) ;coordenada EndIf EndSwitch WEnd Func MouseColor() local $mouse = MouseGetPos() Return Hex(PixelGetColor($mouse[0],$mouse[1]), 6) EndFunc  
    • FrancescoDiMuro
      By FrancescoDiMuro
      Good evening everyone
      First, I want to apologize with you for the title not very clear, but I thought a little bit on which title to set at the thread, and this is the one that came in mind.
      Now, let me explain what I'm trying to understand.

      I am making an application ( with n clients ), with an SQLite Database, which has a Main form, and n sub-forms... 
      Since these sub-forms are called several times, because they are used to add or update records to the Database, I put the code that generates the GUI of these sub-forms in Functions.
      There are two sub-forms which are "treated" as two main forms, since even them have n sub-forms, which perform various tasks.
      Where am I stucked?

      For the Main form I created a Status Bar, in order to display messages ( add/delete/update/search results ), and it works perfectly with all the forms which don't have other sub-forms.
      For the two forms, which indeed have n sub-forms, I created two separated Status Bars, which are (re)created everytime I call the function that then displays the form.
      Practically, I can't set icons to these two Status Bars, and I don't know why.
      I'm really sorry that I don't feel clear enough, so, here you are an example of what I am saying.
      I recreated exactly what my script does:
      #include <GuiButton.au3> #include <GUIConstantsEx.au3> #include <GuiStatusBar.au3> #include <WindowsConstants.au3> Opt("GUIOnEventMode", 1) Global $frmSubForm, _ $txtSubFormField, _ $sbSubFormStatusBar, _ $objSB_IconError = _WinAPI_LoadShell32Icon(109), _ $objSB_IconInformation = _WinAPI_LoadShell32Icon(277) #Region ### START Koda GUI section ### Form= $frmMainForm = GUICreate("Main Form", 300, 300, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "ExitApplication") $sbMainStatusBar = _GUICtrlStatusBar_Create($frmMainForm) $btnCreateSubForm = GUICtrlCreateButton("Create Sub Form", 105, 110, 75, 41, BitOR($BS_CENTER,$BS_VCENTER,$BS_MULTILINE)) GUICtrlSetOnEvent(-1, "GenerateSubForm") GUICtrlSetFont(-1, 10, 400, 0, "Arial") _GUICtrlStatusBar_SetSimple($sbMainStatusBar) _GUICtrlStatusBar_SetText($sbMainStatusBar, "") GUISetState(@SW_SHOW, $frmMainForm) #EndRegion ### END Koda GUI section ### While 1 Sleep(100) WEnd Func ExitApplication() Exit EndFunc Func GenerateSubForm() #Region ### START Koda GUI section ### Form= $frmSubForm = GUICreate("Sub-Form", 300, 300, -1, -1, -1, -1, $frmMainForm) GUISetOnEvent($GUI_EVENT_CLOSE, "DeleteSubForm") $txtSubFormField = GUICtrlCreateInput("", 0, 0, 100, 20) $btnCheckSubFormField = GUICtrlCreateButton("Check Field", 105, 110, 75, 41, BitOR($BS_CENTER,$BS_VCENTER,$BS_MULTILINE)) GUICtrlSetOnEvent(-1, "CheckSubFormField") GUICtrlSetFont(-1, 10, 400, 0, "Arial") $sbSubFormStatusBar = _GUICtrlStatusBar_Create($frmSubForm) _GUICtrlStatusBar_SetSimple($sbSubFormStatusBar) _GUICtrlStatusBar_SetText($sbSubFormStatusBar, "") GUISetState(@SW_SHOW, $frmSubForm) GUISetState(@SW_DISABLE, $frmMainForm) #EndRegion ### END Koda GUI section ### EndFunc Func DeleteSubForm() ; Declared Globally => $frmSubForm GUIDelete($frmSubForm) GUISetState(@SW_ENABLE, $frmMainForm) EndFunc Func WriteToStatusBar($sbStatusBar, $objSB_Icon, $strText) _GUICtrlStatusBar_SetIcon($sbStatusBar, 0, $objSB_Icon) _GUICtrlStatusBar_SetText($sbStatusBar, $strText) ConsoleWrite("Icon Handle: " & $objSB_Icon & @CRLF) EndFunc Func CheckSubFormField() ; Declared Globally => $txtSubFormField If GUICtrlRead($txtSubFormField) = "" Then ; Declared Globally => $sbStatusBar WriteToStatusBar($sbSubFormStatusBar, $objSB_IconError, "Field NOK.") Else WriteToStatusBar($sbSubFormStatusBar, $objSB_IconInformation, "Field OK.") EndIf EndFunc The text is set, but icon is not.
      Could someone please tell me why?
      Thanks everyone in advance  

      Best Regards.
    • Reziskonh
      By Reziskonh
      Hi, everybody
      I look for GUI whose behavior similar to the message of an email client or antivirus
      In other words:
          Any PC screen able to calculate the size
          To consider the Task bar size
          To find the lower corner on the right/below and to nestle on it

      Notes:
      In GUI the GUICtrlCreateEdit field (as option) - that can be received and displayed through variable information
      Thanks a lot
      PS
      I use the translator, excuse if something is not clear
       

    • VollachR
      By VollachR
      Hi,
      I'd like to show a progress bar for an operation performed by an external program my script is running silently, I want to show it in a GUI I created using the GUICtrlCreateProgress but I have no idea how to do it.
      The important thing to point out is that there's no way of knowing how long the external program will run, as it is a file splitter and it depends on the size of file it splits and the split parts size.
      Can someone point me in the right direction or give me an example how to do so?
      This is my RunWait command:
      RunWait($MYFILES1 & '\fsplit.exe -split ' & $Size & ' mb ' & $File & " -f " & $File & "." & $extension) It uses multiple variables declared and set earlier in the script, how will I got about having the progress of that command shown using GUICtrlCreateProgress ? Is it possible?
      Thank you.
    • nacerbaaziz
      By nacerbaaziz
      Hello my friends
      I have an inquiry and I hope to find the answer here
      I want to create a graphical user interface
      but I want to hide the system menu
      I mean the window menu
      Is this possible?
      If is possible please give me how to do that
      Thanks in advance
×