Jump to content
Paranthaman

Need a help in Excel UDF (_Excel_RangeWrite)

Recommended Posts

Hi Everyone,

I am a beginner and I am currently learning and practicing what Autoit can do, so kindly pardon if it sound's silly.

What my program does ----> I had written a program where I have a FOR (i=0 to n) loop which is running for n times. Inside the FOR loop, contents of array is written into excel using _Excel_RangeWrite .

_Excel_RangeWrite($oExcelDoc, $oExcelDoc.Activesheet, $arrayname, "A1")

Problem ------> During every loop run the contents of column A is only altered

What i intend to do ------> For every loop run (i=0,1,2,3...) I want to write the array contents into respective next adjacent excel columns

i.e) For i=0 loop, every array content should be written in A Column of excel

For i = 1 loop, every array content should be written in B Column of excel.

 

Can anyone give me an idea of  how can i do this? Thanks 

Share this post


Link to post
Share on other sites

You can also transpose your array for example:

#include <Array.au3>
#include <Excel.au3>

Local $aArray[26] = ['A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z']
$oExcel = _Excel_Open()
$oWorkbook = _Excel_BookNew($oExcel)
;~ Write Rows
_Excel_RangeWrite($oWorkbook, $oWorkbook.ActiveSheet, $aArray, 'A1')
_ArrayTranspose($aArray)
;~ Write Columns
_Excel_RangeWrite($oWorkbook, $oWorkbook.ActiveSheet, $aArray, 'A1')

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By SkysLastChance
      Stuck here scratching my head again.
      I am trying to write a formula    =IF(AND(X2="X",Y2=""),1,"")   to the B2 cell in excel. 
      However, my code does not put anything in.  I also don't get any errors. 
      #include <Excel.au3> Local $oWorkbook $oExcel = _Excel_Open() $sWorkbook = @ScriptDir & "\VitalSite" & " " & @Mon & "_" & @MDAY & "_" & @Year & ".xlsx" $oWorkbook = _Excel_BookOpen($oExcel,$sWorkbook) _Excel_RangeWrite($oWorkbook,Default, '=IF(AND(X' & 2 & '="X",Y' & 2 & '=""),1,"Hello"', "B" & 2)  
       
    • By _leo_
      Hey there! 😃
      I am having a problem with the _Excel_RangeFind. I am trying to search for a value in a particular cell range. The script copies the value from the internet. Copying and saving as a variable is working fine, but as soon as it should find the value in excel, nothing happens. ( I am not getting an error)
      #include <Excel.au3> Func Excel() Send("{CTRLDOWN}") Send("{c}") Send("{CTRLUP}") Local $sName = ClipGet() ;Text Local $sShortName = StringTrimRight ( $sName, 1) ;delete one letter Local $bOpenWorkBook = False, $oExcel = _Excel_Open() Local $sFilePath = "C:\Users\Acer\OneDrive\xyz.xlsx" Local $oWorkbook $oWorkbook = _Excel_BookAttach($sFilePath) If @error Then $oWorkbook = _Excel_BookOpen($oExcel, $sFilePath) $bOpenWorkBook = True EndIf sleep(15000) Send("{LWINDown}") Send ("{up}") ;maximize window Send("{LWINup}") sleep(1000) _Excel_RangeFind ($oWorkbook, $sShortName, "A3:A56") EndFunc Is anyone familiar with this problem or am I just missing some basic stuff? 
      Thanks for help!
    • By _leo_
      Hey guys
      I'm new to autoit, so this could be a simple question. I'm trying to read the value from the currently selected cell in Excel. I read on the forum and tired to find videos, but I couldn't quite get to it. 
      This is what I have got so far:
       
      Local $oExcel_1 = _Excel_Open()
      Local $var = "C:\Users\Acer\xy"
      Local $oWorkbook = _Excel_BookOpen($oExcel_1,$var)
       
      Local $_read1 = _Excel_RangeRead($oWorkbook, Default.Application.ActiveCell.Address)
       
      Whatever I try, I either get an error or it only reads "0".
       
      Thank you very much for any helpful thoughts!
    • By Rhidlor
      Quick question, when working with Excel, does each workbook require its own Excel instance, or can multiple workbooks be opened off of the same Excel instance? I tested both ways, on the surface they both seemed to work, just thought I'd ask here to make sure before proceeding any further. Thanks!
      Disclaimer: The following is pseudo code
      $excel_instance1 = _Excel_Open() $workbook1 = _Excel_BookOpen($excel_instance1, @ScriptDir & "\book1.xlsx") $workbook2 = _Excel_BookOpen($excel_instance1, @ScriptDir & "\book2.xlsx") Or
      $excel_instance1 = _Excel_Open() $workbook1 = _Excel_BookOpen($excel_instance1, @ScriptDir & "\book1.xlsx") $excel_instance2 = _Excel_Open() $workbook2 = _Excel_BookOpen($excel_instance2, @ScriptDir & "\book2.xlsx")  
    • By TheDcoder
      Hello everyone, I am working on a project which requires reading a few values from Excel, the catch is that I need it to be very fast... unfortunatley I found out that read operations using the supplied Excel UDF are very slow, more than 150 ms for each operation on average
      Here is my testing setup that I made:
      #include <Excel.au3> #include <MsgBoxConstants.au3> Global $iTotalTime = 0 Test() Func Test() Local $oExcel = _Excel_Open() Local $oBook = _Excel_BookAttach("Test.xlsx", "FileName", $oExcel) Local $sSheet = "Sheet1" If @error Then Return MsgBox($MB_ICONERROR, "Excel Failed", "Failed to attach to Excel") Local $iNum For $iRow = 1 To 6 Time() Local $iNum = Number(_Excel_RangeRead($oBook, $sSheet, "A" & $iRow)) If ($iNum = 1) Then ConsoleWrite("Row " & $iRow & " is 1 and value of column B is " & _Excel_RangeRead($oBook, $sSheet, "B" & $iRow)) Else ConsoleWrite("Row " & $iRow & " is not 1") EndIf ConsoleWrite(". Reading took: ") Time() Next ConsoleWrite("The whole operation took " & $iTotalTime & " milliseconds." & @CRLF) EndFunc Func Time() Local Static $hTimer Local Static $bRunning = False If $bRunning Then Local $iTime = Round(TimerDiff($hTimer), 2) $iTotalTime += $iTime ConsoleWrite($iTime & @CRLF) Else $hTimer = TimerInit() EndIf $bRunning = Not $bRunning EndFunc And Test.xlsx in CSV format:
      1,-1 -1,1 1,-1 1,1 -1,-1 1,1 Here is the actual xlsx but it should expire in a week: https://we.tl/t-EVkxGp1kc6
      And finally output from my script:
      Row 1 is 1 and value of column B is -1. Reading took: 276.06 Row 2 is not 1. Reading took: 163.36 Row 3 is 1 and value of column B is -1. Reading took: 302.58 Row 4 is 1 and value of column B is 1. Reading took: 294.65 Row 5 is not 1. Reading took: 152.33 Row 6 is 1 and value of column B is 1. Reading took: 284.92 The whole operation took 1473.9 milliseconds.  
      Taking ~1.5 seconds for reading 6 rows of data is bad for my script, which needs to run as fast as possible . It would be nice if I can bring this down to 100 ms somehow, I am not very experienced working with MS office so I thought about asking you folks for help and advice on how I can optimize my script to squeeze out every bit of performance that I can get from this script
       
      Thanks for the help in advance!
×
×
  • Create New...