Jump to content
jannikrendl

Can't exit the GUI/Script

Recommended Posts

jannikrendl

Hey guys,

I was trying to create a script with a GUI but when I start the script via pressing the startbutton in my GUI and then trying to stop the script it won't close/stop.

Here is the script:

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
Global $GUI = GUICreate("AlphaAgility", 218, 65, 1147, 123)
Global $StartButton = GUICtrlCreateButton("Start", 24, 16, 75, 25)
Global $StopButton = GUICtrlCreateButton("Stop", 120, 16, 75, 25)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $StartButton
            while(1)
            Agility()
            WEnd
        Case $StopButton
            Exit
    EndSwitch
WEnd

Global $agility = False


Func Agility()
    MouseClick("Left",random(466,500),random(634,669),1,random(10,20));Balancier-Stamm
        If Not(@error) Then
        $agility = True
        sleep(random(0,200))
        MouseMove(random(408,661),random(632,749),random(10,20));random Mousemovement Balancier-Stamm
        Else
        EndIf
    sleep(5500)
    MouseClick("Left",448,820,1,random(10,20));Netz
        If Not(@error) Then
        $agility = True
        sleep(random(0,200))
        MouseMove(random(334,557),random(774,876),random(10,20));random Mousemovement Netz
        Else
        $agility = False
        EndIf
    sleep(3750)
    MouseClick("Left",480,706,1,random(10,20));Ast
    If Not(@error) Then
        $agility = True
        ;sleep(random(0,200))
        ;MouseMove(random(95,953),random(117,1067),random(10,20)) -> kein random Mousemovement nötig
        Else
        $agility = False
        EndIf
    sleep(2750)
    MouseClick("Left",727,608,1,random(10,20));Balancier-Seil
    If Not(@error) Then
        $agility = True
        sleep(random(0,200))
        MouseMove(random(723,891),random(572,676),random(10,20));random Mousemovement Balancier-Seil
        Else
        $agility = False
        EndIf
    sleep(6750)
    MouseClick("Left",698,633,1,random(10,20));Ast
    If Not(@error) Then
        $agility = True
        ;sleep(random(0,200))
        ;MouseMove(random(95,953),random(117,1067),random(10,20)) -> kein random Mousemovement nötig
        Else
        $agility = False
        EndIf
    sleep(4000)
    MouseClick("Left",random(372,459),random(136,202),1,random(10,20));Netz
    If Not(@error) Then
        $agility = True
        sleep(random(0,200))
        MouseMove(random(388,510),random(140,212),random(10,20));random Mousemovement Netz
        Else
        $agility = False
        EndIf
    sleep(6250)
    MouseClick("Left",random(362,401),random(363,409),1,random(10,20));Röhre
    If Not(@error) Then
        $agility = True
        ;sleep(random(0,200))
        ;MouseMove(random(95,953),random(117,1067),random(10,20)) -> kein random Mousemovement nötig
        Else
        $agility = False
        EndIf
    sleep(7000)
    MouseClick("Left",14,654,1,random(10,20));Startposition
        If Not(@error) Then
        $agility = True
        ;sleep(random(0,200))
        ;MouseMove(random(388,510),random(140,212),random(10,20)) -> kein random Mousemovement nötig
        Else
        EndIf
    sleep(4000)
EndFunc

Thanks in advance

Jannik Rendl

Share this post


Link to post
Share on other sites
InunoTaishou

It's because when you click the $StartButton you never leave the Agility() function. It's an infinite while loop and prevents the Switch $nMsg to execute, so your gui will never see that the $GUI_EVENT_CLOSE.

Share this post


Link to post
Share on other sites
LeCarre

Simple solution is to change

        Case $StartButton
            while(1)
            Agility()
            WEnd
to 

        Case $StartButton
            Agility()
 

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • UEZ
      By UEZ
      Following script shows a parent GUI with a child GUI initialized as MDICHILD.
      #include <Constants.au3> #include <GUIConstantsEx.au3> #include <GuiReBar.au3> #include <GuiScrollBars.au3> #include <GuiToolbar.au3> #include <ScreenCapture.au3> #include <ScrollBarConstants.au3> #include <WindowsConstants.au3> _GDIPlus_Startup() Global Enum $idNew = 1000, $idOpen, $idSave, $idHelper Global Const $iImageW = @DesktopWidth, $iImageH = @DesktopHeight Global Const $hBMP_ScreenCapture = _ScreenCapture_Capture("", 0, 0, $iImageW, $iImageH, False) Global Const $hBitmap = _GDIPlus_BitmapCreateFromHBITMAP($hBMP_ScreenCapture) Sleep(50) Global Const $iW = 1500, $iH = 700, $SC_DRAGMOVE = 0xF012 Global Const $hGUI = GUICreate("Move child GUI within GUI", $iW, $iH) Global Const $hToolbar = _GUICtrlToolbar_Create($hGUI) Global Const $hReBar = _GUICtrlRebar_Create($hGUI, BitOR($CCS_TOP, $RBS_VARHEIGHT, $RBS_AUTOSIZE, $RBS_BANDBORDERS)) Global Const $height_delta = 37 Global Const $idPic = GUICtrlCreatePic("", 0, $height_delta + 2, $iW, $iH) Global $hBitmap_tmp, $hHBitmap_tmp $hBitmap_tmp = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Global $hGfx_Context = _GDIPlus_ImageGetGraphicsContext($hBitmap_tmp) _GUICtrlToolbar_AddBitmap($hToolbar, 1, -1, $IDB_STD_LARGE_COLOR) _GUICtrlToolbar_AddButton($hToolbar, $idNew, $STD_FILENEW) _GUICtrlToolbar_AddButton($hToolbar, $idOpen, $STD_FILEOPEN) _GUICtrlToolbar_AddButton($hToolbar, $idSave, $STD_FILESAVE) _GUICtrlToolbar_AddButtonSep($hToolbar) _GUICtrlToolbar_AddButton($hToolbar, $idHelper, $STD_HELP) _GUICtrlRebar_AddToolBarBand($hReBar, $hToolbar, "", 0) Global Const $iVSscroll = _WinAPI_GetSystemMetrics(2) Global Const $iHSscroll = _WinAPI_GetSystemMetrics(3) Global Const $iYCaption = _WinAPI_GetSystemMetrics(4) Global Const $iYFixedFrame = _WinAPI_GetSystemMetrics(8) Global Const $iXFixedFrame = _WinAPI_GetSystemMetrics(7) Global Const $iMetricsSumX = $iVSscroll + $iXFixedFrame * 2 Global Const $iMetricsSumY = $iHSscroll + $iYCaption + $iYFixedFrame _GUIScrollBars_Init($hGUI) _GUIScrollBars_SetScrollInfoMin($hGUI, $SB_HORZ, 0) _GUIScrollBars_SetScrollInfoMax($hGUI, $SB_HORZ, $iImageW - $iW + 61 + $iMetricsSumX) _GUIScrollBars_SetScrollInfoMin($hGUI, $SB_VERT, 0) _GUIScrollBars_SetScrollInfoMax($hGUI, $SB_VERT, $iImageH - $iH + $iMetricsSumY + $height_delta - 1) GUISetState(@SW_SHOW, $hGUI) Global Const $STM_SETIMAGE = 0x0172 _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hBMP_ScreenCapture)) Global $IE_offset_x = 0, $IE_offset_y = 0 DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) GUIRegisterMsg($WM_HSCROLL, "WM_HSCROLL_IE") GUIRegisterMsg($WM_VSCROLL, "WM_VSCROLL_IE") Global $iPosX_Crop = 0, $iPosY_Crop = 0, $iW_crop = 200, $iH_crop = 200, $bMove_Crop = True Global $hGUI_IE_Crop = GUICreate("", $iW_crop, $iH_crop, $iPosX_Crop, $iPosY_Crop) GUISetStyle(BitOR($WS_BORDER, $WS_POPUP), $WS_EX_MDICHILD) _WinAPI_SetParent($hGUI_IE_Crop, $hGUI) WinSetTrans($hGUI_IE_Crop, "", 0xA0) Global $iLable_CropMove = GUICtrlCreateLabel("", 0, 0, $iW_crop, $iH_crop, -1, $GUI_WS_EX_PARENTDRAG) GUISetState(@SW_SHOW, $hGUI_IE_Crop) GUIRegisterMsg($WM_MOVE, "WM_MOVE_IE_GUI_Crop") ;~ GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN") Do Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch Until False GUIRegisterMsg($WM_HSCROLL, "") GUIRegisterMsg($WM_VSCROLL, "") GUIRegisterMsg($WM_MOVE, "") GUIRegisterMsg($WM_LBUTTONDOWN, "") _WinAPI_DeleteObject($hBMP_ScreenCapture) _GDIPlus_BitmapDispose($hBitmap_tmp) _GDIPlus_BitmapDispose($hBitmap) _GDIPlus_GraphicsDispose($hGfx_Context) _GDIPlus_Shutdown() Exit Func WM_HSCROLL_IE($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $Min, $Max, $Page, $TrackPos ; Get all the horizontal scroll bar information Local $tSCROLLINFO_X = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_HORZ) $Min = DllStructGetData($tSCROLLINFO_X, "nMin") $Max = DllStructGetData($tSCROLLINFO_X, "nMax") $Page = DllStructGetData($tSCROLLINFO_X, "nPage") ; Save the position for comparison later on $IE_offset_x = DllStructGetData($tSCROLLINFO_X, "nPos") $TrackPos = DllStructGetData($tSCROLLINFO_X, "nTrackPos") #forceref $Min, $Max Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Switch $nScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x - $Page) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $TrackPos) EndSwitch DllStructSetData($tSCROLLINFO_X, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO_X) $IE_offset_x = DllStructGetData($tSCROLLINFO_X, "nPos") DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) $hHBitmap_tmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap_tmp) _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap_tmp)) _WinAPI_DeleteObject($hHBitmap_tmp) $bMove_Crop = False ConsoleWrite($iPosX_Crop & ", " & $iPosY_Crop & " / " & $IE_offset_x & ", " & $IE_offset_y & @CRLF) WinMove($hGUI_IE_Crop, "", -$IE_offset_x + $iPosX_Crop, -$IE_offset_y + $iPosY_Crop) ;~ DllCall("user32.dll", "bool", "MoveWindow", "hwnd", $hGUI_IE_Crop, "int", -$IE_offset_x + $iPosX_Crop, "int", -$IE_offset_y + $iPosY_Crop, "int", $iW_crop, "int", $iH_crop, "bool", True) $bMove_Crop = True Return "GUI_RUNDEFMSG" EndFunc ;==>WM_HSCROLL_IE Func WM_VSCROLL_IE($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $Min, $Max, $Page, $TrackPos ;~ ; Get all the horizontal scroll bar information Local $tSCROLLINFO_Y = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO_Y, "nMin") $Max = DllStructGetData($tSCROLLINFO_Y, "nMax") $Page = DllStructGetData($tSCROLLINFO_Y, "nPage") ; Save the position for comparison later on $IE_offset_y = DllStructGetData($tSCROLLINFO_Y, "nPos") $TrackPos = DllStructGetData($tSCROLLINFO_Y, "nTrackPos") #forceref $Min, $Max Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Switch $nScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y - $Page) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $TrackPos) EndSwitch DllStructSetData($tSCROLLINFO_Y, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO_Y) $IE_offset_y = DllStructGetData($tSCROLLINFO_Y, "nPos") DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) $bMove_Crop = False ConsoleWrite($iPosX_Crop & ", " & $iPosY_Crop & " / " & $IE_offset_x & ", " & $IE_offset_y & @CRLF) WinMove($hGUI_IE_Crop, "", -$IE_offset_x + $iPosX_Crop, -$IE_offset_y + $iPosY_Crop) ;~ DllCall("user32.dll", "bool", "MoveWindow", "hwnd", $hGUI_IE_Crop, "int", -$IE_offset_x + $iPosX_Crop, "int", -$IE_offset_y + $iPosY_Crop, "int", $iW_crop, "int", $iH_crop, "bool", True) $bMove_Crop = True Return "GUI_RUNDEFMSG" EndFunc ;==>WM_VSCROLL_IE Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam) _SendMessage($hGUI_IE_Crop, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndFunc ;==>_WM_LBUTTONDOWN Func WM_MOVE_IE_GUI_Crop($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam If $hWnd = $hGUI_IE_Crop And $bMove_Crop Then $iPosX_Crop = _WinAPI_LoWord($lParam) $iPosY_Crop = _WinAPI_HiWord($lParam) EndIf Return "GUI_RUNDEFMSG" EndFunc ;==>WM_MOVE_IE_GUI_Crop Func WM_SIZE_IE_GUI_Crop($hWnd, $iMsg, $wParam, $lParam) Return $GUI_RUNDEFMSG EndFunc ;==>WM_SIZE_IE_GUI_Crop Func DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) _GDIPlus_GraphicsDrawImageRectRect($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH, 0, 0, $iW, $iH) $hHBitmap_tmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap_tmp) _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap_tmp)) _WinAPI_DeleteObject($hHBitmap_tmp) EndFunc  
      My problem: if you move the child window at left upper corner to another place and move either H or V scrollbar the child GUI will be moved properly. BUT if you have scrolled the scrollbars to the right bottom of the image and move the child GUI to that corner, too then the child GUI jumps if you click on one of the scrollbars.
      Is there something that I didn't consider?
    • Emmhor1
      By Emmhor1
      Hi All,

      MAIN QUESTION:
      Is it possible to Call specific function within a GUI

      So I have a script with multiple functions although I don't want to use every function every time.
      My Idea is to create a simple GUI which allows me to select what functions I want to use then run the funtions by clicking a button.
      I have already made a GUI which allows me to select specific .exe's I would like to run after selection it runs the .exe one by one.
      This script is on my work laptops and cannot access it right now.
       
      Who can help me with this?
      GUIcreate
      Func1 
      Func2
      Func3
      Then have a boxes which allows me to select the specif Func.(I used GUIChecked and Unchecked in my other script)
      Then a button which executes/calls the selected functions
    • Blois
      By Blois
      Hi Guis,
       
      I need to create keyboard shortcut to navigate the tabs and activate them, but I could not use the code below:
      #include <TabConstants.au3> #include <WindowsConstants.au3> #include <GuiTab.au3> #include <GUIConstantsEx.au3> HotKeySet("^{TAB}", "_TabRight") HotKeySet("^+{TAB}", "_TabLeft") $gui = GUICreate("test",450, 300) $Tab1 = GUICtrlCreateTab(20, 24, 425, 201) $TabSheet1 = GUICtrlCreateTabItem("Tabsheet 1") $lbContagemGrupos2 = GUICtrlCreateLabel("aaaa", 50, 50) GUICtrlSetColor(-1, 0x0000FF) GUICtrlCreateTabItem("") $TabSheet2 = GUICtrlCreateTabItem(" ") $TabSheet3 = GUICtrlCreateTabItem(" ") GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd Func _TabRight() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos + 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Func _TabLeft() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos - 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Exit  
      can you help me?
    • Pricehacker
      By Pricehacker
      Hello again!
      I have tried searching for quite some time now but couldn´t find a single working way to change the class of your GUI that doesn´t include changing it manually after its compilation.
      First or "AutoIt v3 GUI" is a pretty boring name tbh and i would like to spice it up a bit, also, and more importantly, I would like to identify my windows by something other than its title as it will change depending on some factors and im using two different programs independently as multi threading isn't supported.
      Any help is appreciated! Thank you!
    • xtcislove
      By xtcislove
      Hello, 
      i have a Problem with  _WinAPI_SetLayeredWindowAttributes, everything is working as excepted if u are on Windows 7.

      But if u are on Windows 10 the transparent background of a control is not clickable anymore. 

      Could someone help?

      Please see example below, put cmd.jpg into the same folder as Example.au3

      Please see trigger.jpg to see which sections are not clickable in Windows 10 (the red dots, the green dots are clickable) on Windows 7 the red ones and green ones are clickable.
       
      The same problem occurs if i use 
       
       
      Example.au3


×