dascondor

GUI Help????

5 posts in this topic

#1 ·  Posted

Hello I've been working on an IP Scanner Program with help from other people on the forum. Anyway I've hit a wall with why the GUI won't close on Exit button once pass the main screen, please if anyone could help that would be great.

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Icon=..\..\..\Downloads\monkeyicon.ico
#AutoIt3Wrapper_Outfile=IP Monkey.exe
#AutoIt3Wrapper_Run_Tidy=y
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <File.au3>
#include <ScreenCapture.au3>
#include <MsgBoxConstants.au3>
#include <WinAPIFiles.au3>
#include <Array.au3>
#include <GuiListView.au3>
#include <GuiImageList.au3>
#include <ListviewConstants.au3>
#include 'MultiPing.au3' ; <-- take this from the following link:
; http://www.autoitscript.com/forum/topic/156395-versatile-multi-ping
#Region ;ping gui
 Opt("GUIOnEventMode", 1)
; ------ pinger GUI -------------------
Global $StopPing = 0
Local $Win_X = 1200, $Win_Y = 880 ; dimension of window
Global $PingGui = GUICreate("IP Monkey", $Win_X, $Win_Y, -1, -1)
GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui)
Global $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40)
GUICtrlSetFont(-1, 8)
;~ $button1 = GUICtrlCreateLabel("Hit Exit To Quit", 10, $Win_Y - 25, $Win_X - 20, 20, -1, $ES_CENTER)
;~ GUICtrlSetFont(-1, 1, 800)
;~ GUICtrlSetTip(-1, "save")
;~ GUICtrlSetOnEvent(-1, 'QuickRun')
GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP)
GUISetState(@SW_HIDE) ; hidden at startup
; --------- end of pinger gui -------------
#EndRegion ;ping gui


; Generate colored square images
$hImage = _GUIImageList_Create(30, 30)
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green

_GUICtrlListView_SetImageList($listview, $hImage, 0)





#Region ### START Koda GUI section ### Form=
$IPpong = GUICreate("IP Monkey", 572, 253, -1, -1)
GUISetBkColor(0xFFFFFF)
Global $data1 = GUICtrlCreateInput("1", 184, 104, 81, 37, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER))
GUICtrlSetFont(-1, 18, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x000000)
Global $data2 = GUICtrlCreateInput("23", 280, 104, 73, 37, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER))
GUICtrlSetFont(-1, 18, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x000000)
Global $gobutton = GUICtrlCreateButton("GO", 80, 192, 75, 25)
GUICtrlSetTip(-1, "Runs A Live Continuous Ping" & @CRLF & _
        "Until Told Other Wise")
GUICtrlSetBkColor(-1, 0x00FF00)
Global $quickbutton = GUICtrlCreateButton("Quick Run", 240, 192, 75, 25)
GUICtrlSetTip(-1, "Quickly Scans, Then Saves" & @CRLF & _
        "Results In Your 'PingChecks' " & @CRLF & _
        "Folder Under Your Store Number Folder")
GUICtrlSetBkColor(-1, 0xFFFF00)
$title = GUICtrlCreateLabel("IP Monkey", 16, 128, 116, 33)
GUICtrlSetFont(-1, 18, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x000000)
$infobutton = GUICtrlCreateButton("?", 536, 16, 27, 25)
GUICtrlSetTip(-1, "Unsure what to do?" & @CRLF & _
        "This will get give you " & @CRLF & _
        "the help for IP Monkey")
GUICtrlSetBkColor(-1, 0xFF8000)
;$superbutton = GUICtrlCreateButton("", 0, 0, 19, 17)
;GUICtrlSetBkColor(-1, 0xFFFFFF)
;GUICtrlSetState(-1, $GUI_HIDE)
$Label1 = GUICtrlCreateLabel("What Store?", 200, 40, 145, 33)
GUICtrlSetFont(-1, 18, 800, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x000000)
Global $exitbutton = GUICtrlCreateButton("Exit", 400, 192, 75, 25)
GUICtrlSetTip(-1, "What Do You Think This Button Does?")
GUICtrlSetBkColor(-1, 0xFF0000)
$Icon = GUICtrlCreatePic("C:\Users\" & @UserName & "\Desktop\monkeyicon-0.jpg", 16, 16, 100, 100)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

#Region ;Declares
; Reads text file for the base list of IP's
Global $aBase_IPlist = _FileReadToArray_mod(".\IP_List.txt")

Global $replace2 = "Second"
Global $replace3 = "Thrid"

Global $userdata1 = GUICtrlRead($data1)
Global $userdata2 = GUICtrlRead($data2)

Global $savefolder = "C:\Users\"
Global $paths = "\Desktop\PingChecks"
Global $1stpaths = "\~~~Store"
Global $2ndpaths = "~~~"
Global $results = FileExists($savefolder & @UserName & $paths)
Global $foldercheck = FileExists($savefolder & @UserName & $paths & $1stpaths & $userdata1 & $userdata2 & $2ndpaths)
Global $savefile = "C:\Users\" & @UserName & "\Desktop\PingChecks\~~~Store" & $userdata1 & $userdata2 & "~~~\"




#EndRegion ;Declares







#Region ; Foldercreation/ScreenCap/HelpFile



Func DirCheck()
    Global $savefolder = "C:\Users\"
    Global $paths = "\Desktop\PingChecks"
    $results = FileExists($savefolder & @UserName & $paths)

    Global $helptext = "C:\Users\" & @UserName & "\Desktop\PingChecks\README.txt"



    If $results = 0 Then
        DirCreate($savefolder & @UserName & $paths)
        FileWrite($helptext, "             ..  IMMMI  ..             " & @CRLF & _
                "           .~MMMMMMMMMMMMM~.            ")
        Createdforstore()



    ElseIf $results = 1 Then
        Createdforstore()

    EndIf



EndFunc   ;==>DirCheck

Func Createdforstore()

    Local $pathslocal = "\Desktop\PingChecks\"

    If $foldercheck = 0 Then
        DirCreate($savefolder & @UserName & $pathslocal & $1stpaths & $userdata1 & $userdata2 & $2ndpaths)
        Screencap()

    ElseIf $foldercheck = 1 Then
        Screencap()


    EndIf

EndFunc   ;==>Createdforstore


Func Screencap()
    $userdata1 = GUICtrlRead($data1)
    $userdata2 = GUICtrlRead($data2)
    Local $savesfile = "C:\Users\" & @UserName & "\Desktop\PingChecks\~~~Store" & $userdata1 & $userdata2 & "~~~\"
    Global $point = ","
    Global $time = "."
    Global $id = "Store"
    Global $tid = "~"


;~  Global $pathslocal = "\Desktop\PingChecks\"


    _ScreenCapture_CaptureWnd($savesfile & @UserName & $tid & $id & $userdata1 & $userdata2 & $tid & @MON & $time & @MDAY & $time & @YEAR & $tid & @HOUR & $time & @MIN & $tid & ".jpg", $PingGui)


    MsgBox(0, "Completed", " Your Ping Scan Is In Your PingChecks Folder, " & @CRLF & _
            "On Your Desktop.")
    Exit

EndFunc   ;==>Screencap


;helpfile

Func Helpfile()



    $readmecheck = FileExists("README.txt")

    If $readmecheck = 1 Then
        ShellExecute("README.txt")



    ElseIf $readmecheck = 0 Then
        Run("Notepad.exe")
        WinWait("Untitled - Notepad")






        ControlSetText("Untitled - Notepad", '', 'Edit1', "             ..  IMMMI  ..             " & @CRLF & _
                "           .~MMMMMMMMMMMMM~.            ")



    EndIf



EndFunc   ;==>Helpfile





#EndRegion ; Foldercreation/ScreenCap/HelpFile




#Region ; Main_GO/Replace_and_GO


#cs
    ##############################  second script  #############################################

    ; this is to ping continuously a list of IP addresses, get and display ping result "live"
    ; it simulates the dos "ping -t" command but performed simultaneously on many IP
    ; presenting the results in a ListView highlighting not responding devices with a red box
#ce


Func replace_And_Go($s_2, $s_3)

    ; Create a new array wit a new list of IP according to passed second and third octet
    Local $aNew_IPlist = $aBase_IPlist
    For $i = 0 To UBound($aNew_IPlist) - 1
        $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3)
    Next

    GUISetState(@SW_HIDE, $IPpong)
    GUISetState(@SW_SHOW, $PingGui)

    ; pass the new list to the pinger
    Main_GO($aNew_IPlist)

    GUISetState(@SW_HIDE, $PingGui)
    GUISetState(@SW_SHOW, $IPpong)

EndFunc   ;==>replace_And_Go



Func Main_GO($IPlist)
    HotKeySet("{esc}", "_button1")
    ; $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's
    ;
    ; the above command, it loads in the $IPlist array the values contained in the file IP_List.txt
    ; values in the file should be separated by a semicolon, something like in the following example:
    ;
    ; hostname1;192.168.0.1
    ; hostname2;192.168.0.5
    ; hostnameX;10.59.7.200
    ; etc....
    ;
    ;  if values in the file are not separated by a semicolon, but another char is used, for example a comma,
    ;  then just pass it as second parameter of the function: $IPlist = _FileReadToArray_mod(".\IP_List.txt", ",")
    ;
    _GUICtrlListView_BeginUpdate($listview)
    _GUICtrlListView_DeleteAllItems($listview)
    _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView
    _GUICtrlListView_EndUpdate($listview)

    While Not $StopPing ; 1 ; continuously ping addresses of the previously loaded file (IP_List.txt)
        Sleep(10)
        ;
        ;        $IPlist is the array loaded with all the IP to be pinged (a 2d array in this case)
        ;        |
        ;        |      1 means the IP are in the second column of the $IPlist array (first colun is nr. 0)
        ;        |      |
        ;        |      |  +-->  0 means return back an array loaded with results from all pinged addresses (responding and not responding)
        ;        |      |  |     if you use 1 then only responding addresses are loaded in the returned array [default]
        ;        |      |  |     if you use 2 then only NOT responding addresses are loaded in the returned array
        ;        |      |  |     In this case we do not need an  array to be returned, we only need to perform all pings and pass results
        ;        |      |  |     directly (on the fly) to the "_refresh" callback function that will refresh the listview
        ;        |      |  |
        ;        |      |  |  0 means NO lookup name resolution must be performed
        ;        |      |  |  |
        ;        |      |  |  |   +--> this is the callback function to be called for each pinged address each time the ping has finished
        ;        |      |  |  |   |    (see the MultiPing.au3 file for info on all passed params)
        ;        |      |  |  |   |    6 parameters are passed to this function, but only 2 are used by the called function in this case:
        ;        |      |  |  |   |    [4] roundtrip of the responding ping or -1 if IP is down
        ;        |      |  |  |   |    [5] Index (position) of this IP within the caller's passed array
        ;        |      |  |  |   |
        ;        v      v  v  v   v
        _nPing($IPlist, 1, 0, 0, "_refresh")
    WEnd
    HotKeySet("{esc}", _button1)
    $StopPing = 0
EndFunc   ;==>Main_GO


#EndRegion ; Main_GO/Replace_and_GO



#Region ; QuickScan/Replace_and_GO2

Func replace_And_Go2($s_2, $s_3)

    ; Create a new array wit a new list of IP according to passed second and third octet
    Local $aNew_IPlist = $aBase_IPlist
    For $i = 0 To UBound($aNew_IPlist) - 1
        $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3)
    Next

    GUISetState(@SW_HIDE, $IPpong)
    GUISetState(@SW_SHOW, $PingGui)

    ; pass the new list to the pinger
    QuickRun($aNew_IPlist)

    GUISetState(@SW_HIDE, $PingGui)
    GUISetState(@SW_SHOW, $IPpong)

EndFunc   ;==>replace_And_Go2

Func QuickRun($IPlist)
    $userdata1 = GUICtrlRead($data1)
    $userdata2 = GUICtrlRead($data2)

    HotKeySet("{esc}", "_button1")

    Local $Win_X = 1200, $Win_Y = 880 ; dimension of window
    $PingGui = GUICreate("IP Monkey" & "~~~" & @UserName & "~~~" & "Store" & $userdata1 & $userdata2 & "~~~" & @MON & "." & @MDAY & "." & @YEAR & "~~~" & @HOUR & "." & @MIN, $Win_X, $Win_Y, -1, -1)
    GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui)
    $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40)
    GUICtrlSetFont(-1, 8)
    GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP)

    ; Generate colored square images
    $hImage = _GUIImageList_Create(30, 30)
    _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow
    _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red
    _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green

    _GUICtrlListView_SetImageList($listview, $hImage, 0)

    $button1 = GUICtrlCreateButton("Exit", 10, $Win_Y - 25, $Win_X - 20, 20)
    GUICtrlSetTip(-1, "End of program")
    GUICtrlSetOnEvent(-1, "_button1")
    GUISetState(@SW_SHOW)

;~  $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's

    _GUICtrlListView_BeginUpdate($listview)
    _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView
    _GUICtrlListView_EndUpdate($listview)

    ;While 1
    ; perform Pings and update ListView by the "_refresh" callback function
    $aFinalResult = _nPing($IPlist, 1, 0, 0, "_refresh")
;~  _ArrayDisplay($aFinalResult)

    DirCheck()

EndFunc   ;==>QuickRun

#EndRegion ; QuickScan/Replace_and_GO2

#Region ; Misc Funcs (network)

Func _refresh($Params) ; this receive ping results and displays them in the ListView
    _GUICtrlListView_SetItemImage($listview, $Params[5], 0) ; set colour to Yellow
    Sleep(50) ; a little wait
    If $Params[4] = -1 Then ; Device not responding to ping
        _GUICtrlListView_SetItemImage($listview, $Params[5], 1) ; set colour to RED
        _GUICtrlListView_EnsureVisible($listview, $Params[5]) ; Position view to this item
    Else ; Device responds to ping
        _GUICtrlListView_SetItemImage($listview, $Params[5], 2) ; set colour to GREEN
    EndIf
EndFunc   ;==>_refresh




Func _button1() ; Button 1 clicked
    $StopPing = 1
    Exit
EndFunc   ;==>_button1

#EndRegion ; Misc Funcs (network)



While (1)
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

        Case $gobutton
            $userdata1 = GUICtrlRead($data1)
            $userdata2 = GUICtrlRead($data2)
            ; pass the wanted new octet
            replace_And_Go($userdata1, $userdata2) ; generate a list of new IP and Go

        Case $infobutton
            Helpfile()

            ;Case $superbutton
            ;Run("notepad.exe")


        Case $quickbutton
            $userdata1 = GUICtrlRead($data1)
            $userdata2 = GUICtrlRead($data2)
            replace_And_Go2($userdata1, $userdata2)


        Case $exitbutton
            Exit

    EndSwitch
WEnd

 

Share this post


Link to post
Share on other sites



#2 ·  Posted

You should use either Opt("GUIOnEventMode", 1) or GuiGetMsg so comment out the following and it should work fine.

Opt("GUIOnEventMode", 1) - Line 22
GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui) - Line 27
GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui) - Line 347

 

Share this post


Link to post
Share on other sites

#3 ·  Posted (edited)

8 minutes ago, Subz said:

You should use either Opt("GUIOnEventMode", 1) or GuiGetMsg so comment out the following and it should work fine.

Opt("GUIOnEventMode", 1) - Line 22
GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui) - Line 27
GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui) - Line 347

 

Thanks Subz, I tried it out and its still now working. Any other thoughts on it?

 

Edited by dascondor
misspelled

Share this post


Link to post
Share on other sites

#4 ·  Posted

Strange works for me, for both [x] and exit button, are you sure you commented out or deleted the following line:

Opt("GUIOnEventMode", 1)

Share this post


Link to post
Share on other sites

#5 ·  Posted (edited)

22 hours ago, Subz said:

Strange works for me, for both [x] and exit button, are you sure you commented out or deleted the following line:

Opt("GUIOnEventMode", 1)

Yea I don't know whats going on here but this is the script I'm using

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Icon=..\..\..\Downloads\monkeyicon.ico
#AutoIt3Wrapper_Outfile=IP Monkey.exe
#AutoIt3Wrapper_Run_Tidy=y
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <File.au3>
#include <ScreenCapture.au3>
#include <MsgBoxConstants.au3>
#include <WinAPIFiles.au3>
#include <Array.au3>
#include <GuiListView.au3>
#include <GuiImageList.au3>
#include <ListviewConstants.au3>
#include 'MultiPing.au3' ; <-- take this from the following link:
; http://www.autoitscript.com/forum/topic/156395-versatile-multi-ping
#Region ;ping gui

; ------ pinger GUI -------------------
Global $StopPing = 0
Local $Win_X = 1200, $Win_Y = 880 ; dimension of window
Global $PingGui = GUICreate("IP Monkey", $Win_X, $Win_Y, -1, -1)
GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui)
Global $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40)
GUICtrlSetFont(-1, 8)
;~ $button1 = GUICtrlCreateLabel("Hit Exit To Quit", 10, $Win_Y - 25, $Win_X - 20, 20, -1, $ES_CENTER)
;~ GUICtrlSetFont(-1, 1, 800)
;~ GUICtrlSetTip(-1, "save")
;~ GUICtrlSetOnEvent(-1, 'QuickRun')
GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP)
GUISetState(@SW_HIDE) ; hidden at startup
; --------- end of pinger gui -------------
#EndRegion ;ping gui


; Generate colored square images
$hImage = _GUIImageList_Create(30, 30)
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green

_GUICtrlListView_SetImageList($listview, $hImage, 0)





#Region ### START Koda GUI section ### Form=
$IPpong = GUICreate("IP Monkey", 572, 253, -1, -1)
GUISetBkColor(0xFFFFFF)
Global $data1 = GUICtrlCreateInput("1", 184, 104, 81, 37, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER))
GUICtrlSetFont(-1, 18, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x000000)
Global $data2 = GUICtrlCreateInput("23", 280, 104, 73, 37, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER))
GUICtrlSetFont(-1, 18, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x000000)
Global $gobutton = GUICtrlCreateButton("GO", 80, 192, 75, 25)
GUICtrlSetTip(-1, "Runs A Live Continuous Ping" & @CRLF & _
        "Until Told Other Wise")
GUICtrlSetBkColor(-1, 0x00FF00)
Global $quickbutton = GUICtrlCreateButton("Quick Run", 240, 192, 75, 25)
GUICtrlSetTip(-1, "Quickly Scans, Then Saves" & @CRLF & _
        "Results In Your 'PingChecks' " & @CRLF & _
        "Folder Under Your Store Number Folder")
GUICtrlSetBkColor(-1, 0xFFFF00)
$title = GUICtrlCreateLabel("IP Monkey", 16, 128, 116, 33)
GUICtrlSetFont(-1, 18, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x000000)
$infobutton = GUICtrlCreateButton("?", 536, 16, 27, 25)
GUICtrlSetTip(-1, "Unsure what to do?" & @CRLF & _
        "This will get give you " & @CRLF & _
        "the help for IP Monkey")
GUICtrlSetBkColor(-1, 0xFF8000)
;$superbutton = GUICtrlCreateButton("", 0, 0, 19, 17)
;GUICtrlSetBkColor(-1, 0xFFFFFF)
;GUICtrlSetState(-1, $GUI_HIDE)
$Label1 = GUICtrlCreateLabel("What Store?", 200, 40, 145, 33)
GUICtrlSetFont(-1, 18, 800, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0x000000)
Global $exitbutton = GUICtrlCreateButton("Exit", 400, 192, 75, 25)
GUICtrlSetTip(-1, "What Do You Think This Button Does?")
GUICtrlSetBkColor(-1, 0xFF0000)
$Icon = GUICtrlCreatePic("C:\Users\" & @UserName & "\Desktop\monkeyicon-0.jpg", 16, 16, 100, 100)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

#Region ;Declares
; Reads text file for the base list of IP's
Global $aBase_IPlist = _FileReadToArray_mod(".\IP_List.txt")

Global $replace2 = "Second"
Global $replace3 = "Thrid"

Global $userdata1 = GUICtrlRead($data1)
Global $userdata2 = GUICtrlRead($data2)

Global $savefolder = "C:\Users\"
Global $paths = "\Desktop\PingChecks"
Global $1stpaths = "\~~~Store"
Global $2ndpaths = "~~~"
Global $results = FileExists($savefolder & @UserName & $paths)
Global $foldercheck = FileExists($savefolder & @UserName & $paths & $1stpaths & $userdata1 & $userdata2 & $2ndpaths)
Global $savefile = "C:\Users\" & @UserName & "\Desktop\PingChecks\~~~Store" & $userdata1 & $userdata2 & "~~~\"




#EndRegion ;Declares







#Region ; Foldercreation/ScreenCap/HelpFile



Func DirCheck()
    Global $savefolder = "C:\Users\"
    Global $paths = "\Desktop\PingChecks"
    $results = FileExists($savefolder & @UserName & $paths)

    Global $helptext = "C:\Users\" & @UserName & "\Desktop\PingChecks\README.txt"



    If $results = 0 Then
        DirCreate($savefolder & @UserName & $paths)
        FileWrite($helptext, "             ..  IMMMI  ..             " & @CRLF & _
                "           .~MMMMMMMMMMMMM~.            ")
        Createdforstore()



    ElseIf $results = 1 Then
        Createdforstore()

    EndIf



EndFunc   ;==>DirCheck

Func Createdforstore()

    Local $pathslocal = "\Desktop\PingChecks\"

    If $foldercheck = 0 Then
        DirCreate($savefolder & @UserName & $pathslocal & $1stpaths & $userdata1 & $userdata2 & $2ndpaths)
        Screencap()

    ElseIf $foldercheck = 1 Then
        Screencap()


    EndIf

EndFunc   ;==>Createdforstore


Func Screencap()
    $userdata1 = GUICtrlRead($data1)
    $userdata2 = GUICtrlRead($data2)
    Local $savesfile = "C:\Users\" & @UserName & "\Desktop\PingChecks\~~~Store" & $userdata1 & $userdata2 & "~~~\"
    Global $point = ","
    Global $time = "."
    Global $id = "Store"
    Global $tid = "~"


;~  Global $pathslocal = "\Desktop\PingChecks\"


    _ScreenCapture_CaptureWnd($savesfile & @UserName & $tid & $id & $userdata1 & $userdata2 & $tid & @MON & $time & @MDAY & $time & @YEAR & $tid & @HOUR & $time & @MIN & $tid & ".jpg", $PingGui)


    MsgBox(0, "Completed", " Your Ping Scan Is In Your PingChecks Folder, " & @CRLF & _
            "On Your Desktop.")
    Exit

EndFunc   ;==>Screencap


;helpfile

Func Helpfile()



    $readmecheck = FileExists("README.txt")

    If $readmecheck = 1 Then
        ShellExecute("README.txt")



    ElseIf $readmecheck = 0 Then
        Run("Notepad.exe")
        WinWait("Untitled - Notepad")






        ControlSetText("Untitled - Notepad", '', 'Edit1', "             ..  IMMMI  ..             " & @CRLF & _
                "           .~MMMMMMMMMMMMM~.            ")



    EndIf



EndFunc   ;==>Helpfile





#EndRegion ; Foldercreation/ScreenCap/HelpFile




#Region ; Main_GO/Replace_and_GO


#cs
    ##############################  second script  #############################################

    ; this is to ping continuously a list of IP addresses, get and display ping result "live"
    ; it simulates the dos "ping -t" command but performed simultaneously on many IP
    ; presenting the results in a ListView highlighting not responding devices with a red box
#ce


Func replace_And_Go($s_2, $s_3)

    ; Create a new array wit a new list of IP according to passed second and third octet
    Local $aNew_IPlist = $aBase_IPlist
    For $i = 0 To UBound($aNew_IPlist) - 1
        $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3)
    Next

    GUISetState(@SW_HIDE, $IPpong)
    GUISetState(@SW_SHOW, $PingGui)

    ; pass the new list to the pinger
    Main_GO($aNew_IPlist)

    GUISetState(@SW_HIDE, $PingGui)
    GUISetState(@SW_SHOW, $IPpong)

EndFunc   ;==>replace_And_Go



Func Main_GO($IPlist)
    HotKeySet("{esc}", "_button1")
    ; $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's
    ;
    ; the above command, it loads in the $IPlist array the values contained in the file IP_List.txt
    ; values in the file should be separated by a semicolon, something like in the following example:
    ;
    ; hostname1;192.168.0.1
    ; hostname2;192.168.0.5
    ; hostnameX;10.59.7.200
    ; etc....
    ;
    ;  if values in the file are not separated by a semicolon, but another char is used, for example a comma,
    ;  then just pass it as second parameter of the function: $IPlist = _FileReadToArray_mod(".\IP_List.txt", ",")
    ;
    _GUICtrlListView_BeginUpdate($listview)
    _GUICtrlListView_DeleteAllItems($listview)
    _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView
    _GUICtrlListView_EndUpdate($listview)

    While Not $StopPing ; 1 ; continuously ping addresses of the previously loaded file (IP_List.txt)
        Sleep(10)
        ;
        ;        $IPlist is the array loaded with all the IP to be pinged (a 2d array in this case)
        ;        |
        ;        |      1 means the IP are in the second column of the $IPlist array (first colun is nr. 0)
        ;        |      |
        ;        |      |  +-->  0 means return back an array loaded with results from all pinged addresses (responding and not responding)
        ;        |      |  |     if you use 1 then only responding addresses are loaded in the returned array [default]
        ;        |      |  |     if you use 2 then only NOT responding addresses are loaded in the returned array
        ;        |      |  |     In this case we do not need an  array to be returned, we only need to perform all pings and pass results
        ;        |      |  |     directly (on the fly) to the "_refresh" callback function that will refresh the listview
        ;        |      |  |
        ;        |      |  |  0 means NO lookup name resolution must be performed
        ;        |      |  |  |
        ;        |      |  |  |   +--> this is the callback function to be called for each pinged address each time the ping has finished
        ;        |      |  |  |   |    (see the MultiPing.au3 file for info on all passed params)
        ;        |      |  |  |   |    6 parameters are passed to this function, but only 2 are used by the called function in this case:
        ;        |      |  |  |   |    [4] roundtrip of the responding ping or -1 if IP is down
        ;        |      |  |  |   |    [5] Index (position) of this IP within the caller's passed array
        ;        |      |  |  |   |
        ;        v      v  v  v   v
        _nPing($IPlist, 1, 0, 0, "_refresh")
    WEnd
    HotKeySet("{esc}", _button1)
    $StopPing = 0
EndFunc   ;==>Main_GO


#EndRegion ; Main_GO/Replace_and_GO



#Region ; QuickScan/Replace_and_GO2

Func replace_And_Go2($s_2, $s_3)

    ; Create a new array wit a new list of IP according to passed second and third octet
    Local $aNew_IPlist = $aBase_IPlist
    For $i = 0 To UBound($aNew_IPlist) - 1
        $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3)
    Next

    GUISetState(@SW_HIDE, $IPpong)
    GUISetState(@SW_SHOW, $PingGui)

    ; pass the new list to the pinger
    QuickRun($aNew_IPlist)

    GUISetState(@SW_HIDE, $PingGui)
    GUISetState(@SW_SHOW, $IPpong)

EndFunc   ;==>replace_And_Go2

Func QuickRun($IPlist)
    $userdata1 = GUICtrlRead($data1)
    $userdata2 = GUICtrlRead($data2)

    HotKeySet("{esc}", "_button1")

    Local $Win_X = 1200, $Win_Y = 880 ; dimension of window
    $PingGui = GUICreate("IP Monkey" & "~~~" & @UserName & "~~~" & "Store" & $userdata1 & $userdata2 & "~~~" & @MON & "." & @MDAY & "." & @YEAR & "~~~" & @HOUR & "." & @MIN, $Win_X, $Win_Y, -1, -1)
    GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui)
    $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40)
    GUICtrlSetFont(-1, 8)
    GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP)

    ; Generate colored square images
    $hImage = _GUIImageList_Create(30, 30)
    _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow
    _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red
    _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green

    _GUICtrlListView_SetImageList($listview, $hImage, 0)

    $button1 = GUICtrlCreateButton("Exit", 10, $Win_Y - 25, $Win_X - 20, 20)
    GUICtrlSetTip(-1, "End of program")
    GUICtrlSetOnEvent(-1, "_button1")
    GUISetState(@SW_SHOW)

;~  $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's

    _GUICtrlListView_BeginUpdate($listview)
    _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView
    _GUICtrlListView_EndUpdate($listview)

    ;While 1
    ; perform Pings and update ListView by the "_refresh" callback function
    $aFinalResult = _nPing($IPlist, 1, 0, 0, "_refresh")
;~  _ArrayDisplay($aFinalResult)

    DirCheck()

EndFunc   ;==>QuickRun

#EndRegion ; QuickScan/Replace_and_GO2

#Region ; Misc Funcs (network)

Func _refresh($Params) ; this receive ping results and displays them in the ListView
    _GUICtrlListView_SetItemImage($listview, $Params[5], 0) ; set colour to Yellow
    Sleep(50) ; a little wait
    If $Params[4] = -1 Then ; Device not responding to ping
        _GUICtrlListView_SetItemImage($listview, $Params[5], 1) ; set colour to RED
        _GUICtrlListView_EnsureVisible($listview, $Params[5]) ; Position view to this item
    Else ; Device responds to ping
        _GUICtrlListView_SetItemImage($listview, $Params[5], 2) ; set colour to GREEN
    EndIf
EndFunc   ;==>_refresh




Func _button1() ; Button 1 clicked
    $StopPing = 1
    Exit
EndFunc   ;==>_button1

#EndRegion ; Misc Funcs (network)



While (1)
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

        Case $gobutton
            $userdata1 = GUICtrlRead($data1)
            $userdata2 = GUICtrlRead($data2)
            ; pass the wanted new octet
            replace_And_Go($userdata1, $userdata2) ; generate a list of new IP and Go

        Case $infobutton
            Helpfile()

            ;Case $superbutton
            ;Run("notepad.exe")


        Case $quickbutton
            $userdata1 = GUICtrlRead($data1)
            $userdata2 = GUICtrlRead($data2)
            replace_And_Go2($userdata1, $userdata2)


        Case $exitbutton
            Exit

    EndSwitch
WEnd

Does it work for both quick scan and Go?

 

 

@Subz

Edited by dascondor

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • kawliga751
      By kawliga751
      I have a workplace GUI that has a search field function that pulls up customer records to allow changes. I am attempting to 1)LOGIN 2)Enter Search field, enter a number and then {ENTER} 3)change specific field once customer record loads. I have very limited experience in GUI manipulation but I am able to login using the below:
      #include <IE.au3> Const $navOpenInNewTab = 0x0800 Dim $oIE = _IECreate('http://asag.xxxxxxx.com/ASAG/index.htm') Call ("RacksheetSignIn") Func RacksheetSignIn () Local $username = _IEGetObjByName ($oIE,"uname") Local $password = _IEGetObjByName ($oIE,"pword") $oIE.Navigate2('http://asag.xxxxxxx.com/apps/RackSheets/LogInSAG/login.asp',2048) _IEFormElementSetValue ($username, "xxxxxxx") _IEFormElementSetValue ($password, "xxxxxxx") Send('{Enter}') EndFunc However I can't seem to use the _IEGetObjByName or Mouseclick to focus on the search field to allow me to enter my search criteria. When I "inspect element" in the Search field I get the attached:
       
      Any help would be MUCH appreciated
       
       
       

    • Jibberish
      By Jibberish
      I am having difficulties getting updated results from GUICtrlCreateInput. I wrote a small script to demonstrate what I am trying to do.
      This script reads a text file into an array and displays the Name and Number from the text file.
      The user can check a name and change the number, and the results are displayed in _ArrayDisplay.
      Only the Checked names are displayed in their original position. This is necessary for future
      plumbing.
      The problem with this script is the original number is returned, not the changed number. I cannot
      figure out how to get the updated number to be displayed.
      ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; ; This script reads a text file into an array and displays the Name and Number from the text file. ; The user can check a name and change the number, and the results are displayed in _ArrayDisplay. ; Only the Checked names are displayed in their original position. This is necessary for future ; plumbing. ; ; The problem with this script is the original number is returned, not the changed number. I cannot ; figure out how to get the updated number to be displayed. ; ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include-once #include <MsgBoxConstants.au3> #include <array.au3> #include <Date.au3> #include <WinAPIFiles.au3> #include <AutoItConstants.au3> #include <Misc.au3> #include <File.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> Local $iMax = 6 ;Default number of Videos - 1 for the array counter Dim $aTextFile[$iMax][2] ; [start with 5 entries][Name, Number] Don't get confused! [Row][Column] Local $i = 0 Local $iLeft = 30 Local $iTop = 30 Local $sName Local $sNumber Local $aArray Local $iMaxCol = 5 Local $iRow = 0 Local $iCol = 0 Local $aNumberCount[$iMaxCol][2] $aArray1 = ReadFile() $aNamesNumbers = DisplayNames($aArray1) _ArrayDisplay($aNamesNumbers) ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; ; ReadFile() places the contents of the NameNumber.txt file in an array ; ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Func ReadFile() Local $sFileData = @ScriptDir & "\NameNumber.txt" Local $iStrReturn = 0 Local $aArrayFile Local $aTextFile[$iMaxCol][2] Local $aName Local $sCheckBox1 Const $iL = 10 ; Count from Left for GUI so all buttons line up Local $sFill Local $iA = 0, $iN = 0 ; Put the Names into an Array _FileReadToArray($sFileData, $aArrayFile) For $iA = 0 To $aArrayFile[0] ; Step through the array looking for Names If StringInStr($aArrayFile[$iA], "Name:") Then $aName = StringSplit($aArrayFile[$iA],":") $sFill = $aName[2] If UBound($aTextFile) <= $iRow Then ; Resize the array when $iRow is equal to the element count in the array to prevent subscript error ReDim $aTextFile[UBound($aTextFile) + 1][$iMaxCol] EndIf $aTextFile[$iRow][$iCol] = $sFill $iRow += 1 EndIf Next $iCol = 1 $iRow = 0 $sFill = "" For $iA = 1 To $aArrayFile[0] ; Step through the array looking for Numbers If StringInStr($aArrayFile[$iA], "Number:") Then $aName = StringSplit($aArrayFile[$iA],":") $sFill = $aName[2] If UBound($aTextFile) <= $iRow Then ; Resize the array when $iRow is equal to the element count in the array to prevent subscript error ReDim $aTextFile[UBound($aTextFile) + 1][$iMaxCol] EndIf $aTextFile[$iRow][$iCol] = $sFill $iRow += 1 EndIf Next Return $aTextFile EndFunc ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; ; Display the Name and Number ; ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Func DisplayNames($aArray1) Local $aName[$iMax] Local $aNumbers[$iMax] $iMMCount = UBound($aArray1) $iMMCount -=1 Local $iWidth = 300 Local $iLength = 300;$iMMCount * 30 GUISetFont(12) $hGUI = GUICreate("Edit / Update Number Test", $iWidth, $iLength, -1, -1) GUICtrlCreateLabel(" Name Number",1,5) ;$iTop += 30 ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; ; Display Name with a Checkbox. Only Checked Names should be saved. ; ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For $i = 0 to $iMMCount Step 1 $sNameText = $aArray1[$i][0] $iNameLength = StringLen($sNameText) $aName[$i] = GUICtrlCreateCheckbox($sNameText,$iLeft, $iTop) $iTop += 30 Next ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; ; Display the number from the text file below each name. Allow the user to change the number and display the ; new number. ; ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ $iLeft = 60 GUIStartGroup() $iTop = 28 For $i = 0 to $iMMCount Step 1 $sNumberText = $aArray1[$i][1] $aNumberCount[$i][1] = $sNumberText $aNumberCount[$i][0] = GUICtrlCreateInput($sNumberText,$iLeft, $iTop, 50,18, $GUI_DOCKAUTO) GUICtrlSetPos($aNumberCount[$i][0],200) $iTop += 30 Next ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; ; Read the checked names and (possibly updated) number ; ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ $iMMCount = UBound($aNumberCount) $iMMNewCount = $iMMCount - 1 Local $aGUICheckbox[$iMMCount] Local $aCheckedNameNumber[$iMMCount][2] $iLeft = 30 Local $idCloseGUI = GUICtrlCreateButton("Close",$iLeft, $iTop) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $idCloseGUI For $i = 0 To $iMMNewCount Step 1 Switch GUICtrlRead($aName[$i]) Case $GUI_CHECKED $aCheckedNameNumber[$i][0] = $aArray1[$i][0] Case $GUI_UNCHECKED EndSwitch Switch GUICtrlRead($aNumberCount[$i][0]) Case $aCheckedNameNumber[$i][1] = GUICtrlRead($aNumberCount[$i][1]) EndSwitch Next ExitLoop EndSwitch WEnd For $i = 0 to $iMMNewCount step 1 GUICtrlRead($aNumberCount[$i][0]) If $aCheckedNameNumber[$i][0] <> "" Then $aCheckedNameNumber[$i][1] = $aNumberCount[$i][1] EndIf Next GUIDelete($hGUI) Return $aCheckedNameNumber EndFunc This is the text file I am reading. If you want to try this out put the NameNumber.txt file in your script directory. It's attached to the post.
      * This is a dummy file with a Name and Number * The only purpose of this file is to read the updated Number. Name:Taggart Number:916 Name:Mongo Number:90 Name:Hedley Lamarr Number:22 Name:Bart Number:9999 Name:The Waco Kid Number:2244 If I change the number, the original number is displayed at the end, not the updated/modified number. I need the modified number to be displayed.
      Thanks in advance for any assistance!
      Jibberish
      NameNumber.txt
    • FMS
      By FMS
      Hello,
      As I was searching this forum I came along something intresting what was new to me.
      CUI/GUI hybrid.
      Whish sounds very usefull to me to compile it all into 1 script.
      So i was fideling around whit it but couldn't get it to work.
      In the real script (not this simplified version) i got a lot of functions whish i can use whan talking to it by commandline and switches.
      I could not get this to work and hope somebody could give me some pointers on how to make it work.
      Also I was hoping iff somebody could help me whit the /? function?
      (I don't know how to output the help text back to the commandline or the function that can help me do it)
      please advice and thanks in advanced.
      #AutoIt3Wrapper_UseUpx=n #AutoIt3Wrapper_UseX64=n #AutoIt3Wrapper_Change2CUI=y #include <Process.au3> #include <Array.au3> If $CmdLine[0] = 0 Then If _ProcessGetName(ProcessGetParent(@AutoItPID)) = "cmd.exe" Then ;ConsoleWrite("Program was started in CMD" & @CRLF) If Mod($CmdLine[0], 2) <> 0 Then Exit MsgBox(16, $sTitle, "Invalid number of parameters! has to be a multiple of 2!") If $CmdLine[0] = 0 Then Exit MsgBox(16, $sTitle, "No parameters passed!") For $i = 1 To $CmdLine[0] Step 2 If $CmdLine[$i] = "/switch" Then MsgBox(64, "Passed Parameters", "/switch is " & $CmdLine[$i+1]) If $CmdLine[$i] = "/?" Then MsgBox(64, "Passed Parameters", "/? " ) Next _ArrayDisplay($CmdLine) Else #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> $Form1 = GUICreate("Form1", 239, 65, 192, 124) $Button1 = GUICtrlCreateButton("Button1", 32, 24, 75, 25) $Button2 = GUICtrlCreateButton("Button2", 120, 24, 75, 25) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 button1() Case $button2 button2() EndSwitch WEnd EndIf EndIf Exit Func button1() MsgBox(16, "title", "button1()!") EndFunc Func button2() MsgBox(16, "title", "button1()!") EndFunc Func ProcessGetParent($i_PID) ;get PID from parent process done by SmOke_N Local $TH32CS_SNAPPROCESS = 0x00000002 Local $a_tool_help = DllCall("Kernel32.dll", "long", "CreateToolhelp32Snapshot", "int", $TH32CS_SNAPPROCESS, "int", 0) If IsArray($a_tool_help) = 0 Or $a_tool_help[0] = -1 Then Return SetError(1, 0, $i_PID) Local $tagPROCESSENTRY32 = _ DllStructCreate( _ "dword dwsize;" & _ "dword cntUsage;" & _ "dword th32ProcessID;" & _ "uint th32DefaultHeapID;" & _ "dword th32ModuleID;" & _ "dword cntThreads;" & _ "dword th32ParentProcessID;" & _ "long pcPriClassBase;" & _ "dword dwFlags;" & _ "char szExeFile[260]" _ ) DllStructSetData($tagPROCESSENTRY32, 1, DllStructGetSize($tagPROCESSENTRY32)) Local $p_PROCESSENTRY32 = DllStructGetPtr($tagPROCESSENTRY32) Local $a_pfirst = DllCall("Kernel32.dll", "int", "Process32First", "long", $a_tool_help[0], "ptr", $p_PROCESSENTRY32) If IsArray($a_pfirst) = 0 Then Return SetError(2, 0, $i_PID) Local $a_pnext, $i_return = 0 If DllStructGetData($tagPROCESSENTRY32, "th32ProcessID") = $i_PID Then $i_return = DllStructGetData($tagPROCESSENTRY32, "th32ParentProcessID") DllCall("Kernel32.dll", "int", "CloseHandle", "long", $a_tool_help[0]) If $i_return Then Return $i_return Return $i_PID EndIf While @error = 0 $a_pnext = DllCall("Kernel32.dll", "int", "Process32Next", "long", $a_tool_help[0], "ptr", $p_PROCESSENTRY32) If DllStructGetData($tagPROCESSENTRY32, "th32ProcessID") = $i_PID Then $i_return = DllStructGetData($tagPROCESSENTRY32, "th32ParentProcessID") If $i_return Then ExitLoop $i_return = $i_PID ExitLoop EndIf WEnd DllCall("Kernel32.dll", "int", "CloseHandle", "long", $a_tool_help[0]) Return $i_return EndFunc ;==>ProcessGetParent  
    • Jibberish
      By Jibberish
      Hello,
      I have used this forum to get help many times. I thought it was time to (hopefully) help others.
      I created a script that reads a text file with a list of videos, displays the videos in a GUI with checkboxes next to the names, and displays the selected videos. This will become a part of a larger script I am creating to test a video player. The tough part for me was creating the GUI and Dynamic list of videos. I had a lot of trouble finding samples to help me, but finally found one  written by Melba23. The link is in the code, so he gets credit for helping! I also have not used arrays much and they are very picky about looping through the arrays without getting the dreaded error " Array variable has incorrect number of subscripts or subscript dimension range exceeded."  However diligence paid off!
      To run this code, take the video names commented below and create a videos.txt file in your script execution directory. You can put however many video names in this list. Thus the dynamic features of the code.
      Cheers!
      Jibberish
      #include <MsgBoxConstants.au3> #include <StringConstants.au3> #include <array.au3> #include <File.au3> #include <GUIConstantsEx.au3> Local $sMediaFile = @ScriptDir & "\videos.txt" ;~ Videos in videos.txt are: ;~ bbb_1080_60s.mp4 ;~ bbb_1080_60s_1.mp4 ;~ bbb_1080_60s_2.mp4 ;~ tos_4K_60s_HEVC.mp4 ;~ tos_4K_60s_HEVC_1.mp4 ;~ tos_4K_60s_HEVC_2.mp4 ;~ ;~ Additional videos can be added to this list. The functions are Dynamic. Dim $aMediaManifest Local $aArrayFile Local $aVideos Local $sVideoName Local $i ; MAIN ; Put the Video File Names into an Array _FileReadToArray($sMediaFile, $aArrayFile) Local $iVideoCount = UBound($aArrayFile) -1 ; Get the number of videos - 1 to prevent errors _ArrayDelete($aArrayFile, 0) ;Counter just gets in the way ; Move backwards through the array deleting the blank lines For $i = $iVideoCount - 1 To 0 Step -1 If $aArrayFile[$i] = "" Then _ArrayDelete($aArrayFile, $i) EndIf Next $aVideos = DisplayVideos($aArrayFile) $iVideoCount = UBound($aArrayFile) -1 _ArrayDisplay($aVideos) ; Display the checked videos ;~ End of MAIN ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; ; GUI to display Videos in checkboxes ; ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Func DisplayVideos($aArrayFile) Local $iTop = -1 Local $iLeft = -1 Local $iWidth Local $iHeight = $iVideoCount * 30 Local $iL = 10 Local $iT = 10 Local $iRow = 0 Local $aVideo Local $iA = 0, $iB = 0 Local $sFill = "" $iMMCount = UBound($aArrayFile) $iMMNewCount = $iMMCount - 1 Local $aGUICheckbox[$iMMCount] Local $aCheckedVideos[$iMMCount] ; Put the Video File Names into an Array $hGUI = GUICreate("Video Checkbox", $iLeft, $iTop, $iWidth, $iHeight) GUICtrlCreateLabel("Videos", 180, $iT) $iT = $iT + 30 ; This is a great example of using arrays to create GUI check boxes or radio buttons For $i = 0 To $iMMNewCount Step 1 $sMP4Text = $aArrayFile[$i] $aGUICheckbox[$i] = GUICtrlCreateCheckbox($sMP4Text, 30, $iT) $iT += 30 Next $idClose1 = GUICtrlCreateButton("Start", $iL, $iT) GUISetState(@SW_SHOW) ; This section reads the checkboxes and puts the video names in an array in their original position ; in case this is important (as it is to me) ; This was the toughest part to code, and I found no samples online until I saw Melba23's sample here: ; https://www.autoitscript.com/forum/topic/119843-dynamic-gui-problem/#comment-832672 ; I got this working with only a little modification. THANK YOU MELBA23 While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $idClose1 For $i = 0 To $iMMNewCount Step 1 Switch GUICtrlRead($aGUICheckbox[$i]) Case $GUI_CHECKED $aCheckedVideos[$i] = $aArrayFile[$i] Case $GUI_UNCHECKED EndSwitch Next ExitLoop EndSwitch WEnd GUIDelete($hGUI) Return $aCheckedVideos EndFunc ;==>DisplayVideos  
    • thoms
      By thoms
      Hello Forum,
      As said in the title, I'm searching a way to disable all tabstops in a GUI. My GUI includes 15 buttons and 3 edit controls.
      My questions:
      - is there a way to disable all tabstops at a time
      - is there a way to list all controls of a GUI and then disable tabstops one by one
      - or should I use the following line after each button creation:
      _WinAPI_SetWindowLong(GUICtrlGetHandle(-1), $GWL_STYLE, BitAND(_WinAPI_GetWindowLong(GUICtrlGetHandle(-1), $GWL_STYLE), BitNOT($WS_TABSTOP))) Thanks in advance for your valuable help!
      Thoms
      Edit: or maybe disable TAB key? I don't remember how to do!