Jump to content
Sign in to follow this  
Baboo85

Send multiple commands line in a CMD window

Recommended Posts

Hi all,

I need to start a script that include:

- admin privileges

- multiple cmd commands

- no bat, no exe, no tmp files created anywhere (especially in the user temp folder)

In a bat file it would be simple, but users shouldn't see what commands I'm sending.

Example of the script:

echo off
cls
echo.
echo I AM A TOOL
echo.
echo NOTE:
echo - note 1
echo - note 2
echo - etc
set USER1=0
set COMPUTER1=0
if /i %username% equ user.user (
set USER1=1
set COMPUTER1=1 )
if /i %username% equ another.user set USER1=1
if /i %computername% equ notebook set COMPUTER1=1
if %USER1% EQU 1 ( 
if %COMPUTER1% EQU 1 (
reg delete "HKLM\SOFTWARE\blablabla" /f
) else ( echo Computer not authorized. Contact assistance.)
) else ( echo User not authorized. Contact assistance.)
echo.
pause
exit

With the send("") is a disaster.

I'm a noob here, so what can I do?

 

EDIT: OR ELSE I explain the situation and what I need, so if there is a simple solution I can use that.

 

SITUATION: our domain users have Users rights on the machine. Some of them need administrator rights.

We create a local user with administrator rights, so that the users must insert username and password when asked to run something with administrator rights.

We have an internal domain group policy that blocks EXE, BAT, COM, TMP files from the user local temp directory, for a security reason (malware). That also blocks most software installation.

But some users are often out of office, away from workplace and in another country, they need a complete control on their computers.

 

WHAT I NEED: I need to check the username and the computer name. If the username is the one with local administrator rights and the computer name is a computer that is qualified to temporary remove the policy, then I need to execute a REG DELETE command with administrator rights.

 

I hope I explained myself.

 

Thank you very much.

Edited by Baboo85

Share this post


Link to post
Share on other sites

Maybe something like:

;~ AdminInfo.ini
;~ [UserName]
;~ Username = Firstname Lastname
;~ [ComputerName]
;~ ComputerName = Domain

#NoTrayIcon
#include <Array.au3>
Global $bUserName = False, $bComputerName = False
Global $sErrorMsg = ""
Global $sAdminInfo = @ScriptDir & "\AdminInfo.ini"
    If FileExists($sAdminInfo) = 0 Then Exit

Global $aUserName = IniReadSection($sAdminInfo, "UserName")
    If @error Then Exit
If _ArraySearch($aUserName, @UserName, 0, 0, 0, 0, 1, 0) > 0 Then $bUserName = True

Global $aComputerName = IniReadSection($sAdminInfo, "ComputerName")
    If @error Then Exit
If _ArraySearch($aComputerName, @ComputerName, 0, 0, 0, 0, 1, 0) > 0 Then $bComputerName = True

MsgBox(0,'', "Username: " & $bUserName & @CRLF & "ComputerName: " & $bComputerName)

If $bComputerName And $bUserName Then
    MsgBox(0,'', 'test')
    RegDelete("HKLM\SOFTWARE\blahblabla", "RegValue")
Else
    If $bComputerName = False Then $sErrorMsg &= @ComputerName & " is not authorised" & @CRLF
    If $bComputerName = False Then $sErrorMsg &= @UserName & " is not authorised"
    MsgBox(4096, "Error", $sErrorMsg)
EndIf

 

Share this post


Link to post
Share on other sites
RegDelete("HKLM\SOFTWARE\blahblabla", "RegValue")

So this is the command to remove a key from the registry? Nice.

Thank you, I'll try this and I'll let you know, because I can't add files (AdminInfo.ini), I need to keep all into the exe file. I need an array.

It's inconvenient, but users shouldn't see anything.

Also I'll add the #RequireAdmin command

Edited by Baboo85

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By zoel
      Hello people, I have a script which calls CMD and executes the netstat command, but when I run it through SCITE the GUI opens but I have no output, How can I run the command as administrator?
      Here is my script so far
      #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <GuiEdit.au3> #include <ScrollBarsConstants.au3> #include <WindowsConstants.au3> #RequireAdmin Local $aWndPos Local $hWnd = GUICreate("Form2", 900, 420, -1, -1, Default + $WS_MAXIMIZE) GUISetBkColor(0xE4E4E4) Local $idFilemenu = GUICtrlCreateMenu("&File") Local $idExititem = GUICtrlCreateMenuItem("Exit", $idFilemenu) Local $idInput = GUICtrlCreateEdit("", 210, 10, 660, 360) GUICtrlSetResizing(-1, $GUI_DOCKBORDERS) GUICtrlSetFont(-1, 10, 400, Default, "COURIER NEW") Local $idButton = GUICtrlCreateButton("NetStat", 10, 10, 190, 25) GUICtrlSetResizing(-1, BitOR($GUI_DOCKLEFT, $GUI_DOCKTOP, $GUI_DOCKWIDTH, $GUI_DOCKHEIGHT)) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $idExititem Exit Case $idButton GUICtrlSetData($idInput, _CmdInfo() & @CRLF) _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET) _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET) EndSwitch WEnd Func _CmdInfo($_sCmdInfo = "netstat /b") Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo, "", @SW_HIDE, BitOR($STDERR_CHILD, $STDOUT_CHILD)) ; Wait until the process has closed using the PID returned by Run. ProcessWaitClose($iPID) ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead. Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF) Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF) Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr Return $sReult EndFunc  
    • By Danyfirex
      AT Command UDF - for control AT Modems, send SMS, get SMS
       
      Changelog:
      #cs 1.0.0 2020/10/03 . First version - Danyfirex + mLipok 1.0.1 2020/10/04 . Added - Function - _ATCmd_IsPINReady - Danyfirex . Added - Function - _ATCmd_IsPINRequired - Danyfirex . Added - Function - _ATCmd_IsSIMInserted - Danyfirex . Added - Function - _ATCmd_IsSenderSupported - Danyfirex . Added - Function - _ATCmd_OnPINReques - Danyfirex . Added - Function - _ATCmd_SMS_ListTextMessages - Danyfirex . Added - Function - _ATCmd_SetPIN - Danyfirex . Added - Function - __ATCmd_GetPINCounter - Danyfirex - Added - ENUM - $ATCmd_ERR_PIN - Danyfirex - Added - ENUM - $ATCmd_ERR_SIM - Danyfirex . Changed - __ATCmd_ComposePDU() - using _ATCmd_UseUCS2() internally instead parameter - Danyfirex . Suplemented - #CURRENT# - Danyfirex . . 1.0.2 2020/10/05 . Added - ENUM - $ATCmd_MSGLIST_* - mLipok . Added - ENUM - $ATCmd_STATUS__* - mLipok - Added - ENUM - $ATCmd_ERR_PARAMETER - mLipok . Added - _ATCmd_UsePDU() - parameter validation - mLipok . Added - _ATCmd_UseUCS2() - parameter validation - mLipok . Added - more error logs . Changed - MagicNumber replaced with Standard UDF constants - mLipok . Small refactoring - mLipok . . 1.0.3 2020/10/05 . CleanUp - Danyfirex . . 1.0.4 2020/10/05 . Small refactoring - Danyfirex . CleanUp - Danyfirex . . 1.0.5 2020/10/23 . _ATCmd_FullLoging - mLipok . _ATCmd_CMEESetup() ... @WIP - mLipok . $ATCMD_STATUS_11_SUBSCRIBERNUMBER - mLipok . . 1.0.6 2020/10/25 . __ATCmd_CMSErrorParser() - mLipok . . @LAST https://www.nowsms.com/gsm-modem-cms-error-code-list https://m2msupport.net/m2msupport/at-command-to-enable-error-codes/ https://www.micromedia-int.com/en/gsm-2/73-gsm/669-cme-error-gsm-equipment-related-errors https://assets.nagios.com/downloads/nagiosxi/docs/ATCommandReference.pdf https://www.maritex.com.pl/product/attachment/40451/15b4db6d1a10eada42700f7293353776 https://www.multitech.net/developer/wp-content/uploads/2010/10/S000463C.pdf https://www.telit.com/wp-content/uploads/2017/09/Telit_AT_Commands_Reference_Guide_r24_B.pdf https://docs.rs-online.com/5931/0900766b80bec52c.pdf PDU Format / Testers / Encoders / decoders https://m2msupport.net/m2msupport/sms-at-commands/#pduformat http://smstools3.kekekasvi.com/topic.php?id=288 #ce  
       
      Saludos
    • By Drac89
      Hi Team, 
      I am trying to send credentials via autoit on a web app launched via IE. I am passing the credentials into variables and trying to send them send("$username") but username field isn't getting populated. But the password field, I can send the credential, also when I try ieformsetvalue and set the username wrt username field fetched, it's getting send but my login button remains greyed out. 
      Can angularjs keydown function interfere in the autoit send process and not allow the credentials passed if it's not typed out? This is a general question to understand if javascript or angular js etc could detect if the credentials are automated, then it might not detect it as a keydown? 
    • By cruisepandey
      Hi There ! 
      I have a script here : 
       
      ;Launch CMD
      Run("C:\Windows\System32\cmd.exe")
      sleep(2000)
      $cmdHandle = WinActivate("C:\Windows\System32\cmd.exe")
      Sleep(2000)
      ;Sending document
      ControlSend($cmdHandle, "", "", "ftp" & @CRLF)
      ControlSend($cmdHandle, "", "", "open" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "first command" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "second-coomand" & @CRLF)
       
      first-command and second-command I can't provide cause it's internal. I have complied this .au3 file into an exe and it does the work. But I need to invoke this with Java. Java code I have tried is : 
       
          ProcessBuilder pb = new ProcessBuilder("C:\\Users\\username\\eclipse-workspace\\Examples\\src\\com\\own\\examples\\etc.exe");
          pb.start();
          Thread.sleep(5000);
       
      Through java it just launches the cmd and nothing happens after that. Please help !!
    • By Chimp
      I'm trying to drive a command prompt by sending instructions via a NamedPipe.
      This way you can (should) be able to send commands to the command prompt and at the same time "view" the result in the same window.
      This is not allowed if you run a command prompt with "opt_flag" parameters (redirected streams) because this will disable StdOut on the cmd itself.
      This small (trivial) snippet works for the first command sent to the cmd, but further submissions will fail.
      Maybe the problem is in how I use the run () command to start a new cmd with the StdIn redirect from the NamedPipe. It seems that the generated cmd will close automatically after the first reception of the command via NamedPipe.
      suggestions on how to make it work are welcome
      thanks
      #include <NamedPipes.au3> #include <WinAPI.au3> ; Creates an instance of a named pipe Global $sPipeName = "\\.\pipe\pipename" Global $hPipe = _NamedPipes_CreateNamedPipe($sPipeName, 1, 1) MsgBox(0, "Debug", "Pipe created. Now open a CMD") ; run a cmd with only StdIn redirected (StdIn data incoming from a pipe) Global $hCMD = Run(@ComSpec & " /K cmd < " & $sPipeName & @CRLF, "c:\") ; ok? MsgBox(0, "Debug", "now Send a command to the cmd via a NamedPipe") _StdInPipeWrite("dir" & @CRLF) MsgBox(0, 'Debug', "further commands will fail" & @CRLF & "now send command 'dir c:\windows'") $sMessage = "Dir c:\windows" & @CRLF _StdInPipeWrite($sMessage) MsgBox(0, 'Debug', "send another command (will also fail)" & @CRLF & "now send command 'echo Hello'") _StdInPipeWrite("echo Hello" & @CRLF) MsgBox(0, "Debug", "end of test") ProcessClose($hCMD) Func _StdInPipeWrite($sMessage) ; =============================================================================================================================== ; This function writes a message to the pipe ; =============================================================================================================================== Local $iWritten, $iBuffer, $pBuffer, $tBuffer $iBuffer = StringLen($sMessage) + 1 $tBuffer = DllStructCreate("char Text[" & $iBuffer & "]") $pBuffer = DllStructGetPtr($tBuffer) DllStructSetData($tBuffer, "Text", $sMessage) If Not _WinAPI_WriteFile( _ $hPipe, _ ; ...... Handle to the file to be written $pBuffer, _ ; .... Pointer to the buffer containing the data to be written $iBuffer, _ ; .... Number of bytes to be written to the file $iWritten, _ ; ... The number of bytes written 0 _ ; ............ [optional] A $tagOVERLAPPED structure or a pointer to it ) Then ConsoleWrite("WriteMsg: _WinAPI_WriteFile failed" & @CRLF & _WinAPI_GetLastErrorMessage()) Else ConsoleWrite("WriteMsg: write OK" & @CRLF & _WinAPI_GetLastErrorMessage() & @CRLF) EndIf EndFunc ;==>_StdInPipeWrite  
×
×
  • Create New...