Jump to content
Sign in to follow this  
RC86

Refresh GUI after ini write

Recommended Posts

Afternoon, I could very well be doing this wrong so feel free to totally advise otherwise - I'm wanting to use a GUI to first display a key from within an INI file, then secondly change the INI file by using a FileSelectFolder command but then I want to see the GUI change to reflect the change I've just made.

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 615, 437, 192, 124)
$Input1 = GUICtrlCreateInput(Iniread(@WorkingDir & "\test.ini","Path","FilePath",""), 64, 80, 121, 21)
$Button1 = GUICtrlCreateButton("Change", 200, 80, 75, 25)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1
            $selectedFolder = FileSelectFolder("Select Log Path Directory",@WorkingDir,0)
            If NOT $selectedFolder = "" Then
                $newLogPath = IniWrite(@WorkingDir & "\test.ini","Path","FilePath",$selectedFolder)
            EndIf


    EndSwitch
WEnd

So 2 part question really: (1) Should I be using GUICtrlCreateInput to display my INI read from within the GUI? (2) How can I refresh the GUI to update that to read the new information I've just written to the GUI?

Thanks!

Capture.PNG

Edited by RC86
Adding screenshot of GUI when running.

Share this post


Link to post
Share on other sites

Hi.

You can use GUICtrlSetData() to set the new value. I would prefer a label rather than an input, because it wouldn't look like you can write the path with keyboard.

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
Local $Form1 = GUICreate("Form1", 615, 437, 192, 124)
Local $Input1 = GUICtrlCreateLabel(Iniread(@WorkingDir & "\test.ini","Path","FilePath",""), 64, 80, 321, 21) ; LABEL instead Input
Local $Button1 = GUICtrlCreateButton("Change", 400, 80, 75, 25)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
Local $nMsg, $selectedFolder, $newLogPath
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1
            $selectedFolder = FileSelectFolder("Select Log Path Directory",@WorkingDir,0)
            If NOT $selectedFolder = "" Then
                $newLogPath = IniWrite(@WorkingDir & "\test.ini","Path","FilePath",$selectedFolder)
                GUICtrlSetData($Input1, Iniread(@WorkingDir & "\test.ini","Path","FilePath","")) ; SET date into label
            EndIf


    EndSwitch
WEnd

Conrad


SciTE4AutoIt = 3.7.3.0   AutoIt = 3.3.14.2   AutoItX64 = 0   OS = Win7Pro SP1   OSArch = X64   Language = 0407/german
H:\...\AutoIt3\SciTE     H:\...\AutoIt3      H:\...\AutoIt3\Include     (H:\ = Network Drive)

   88x31.png  Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind.

Share this post


Link to post
Share on other sites
14 minutes ago, Simpel said:

Hi.

You can use GUICtrlSetData() to set the new value. I would prefer a label rather than an input, because it wouldn't look like you can write the path with keyboard.

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
Local $Form1 = GUICreate("Form1", 615, 437, 192, 124)
Local $Input1 = GUICtrlCreateLabel(Iniread(@WorkingDir & "\test.ini","Path","FilePath",""), 64, 80, 321, 21) ; LABEL instead Input
Local $Button1 = GUICtrlCreateButton("Change", 400, 80, 75, 25)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
Local $nMsg, $selectedFolder, $newLogPath
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1
            $selectedFolder = FileSelectFolder("Select Log Path Directory",@WorkingDir,0)
            If NOT $selectedFolder = "" Then
                $newLogPath = IniWrite(@WorkingDir & "\test.ini","Path","FilePath",$selectedFolder)
                GUICtrlSetData($Input1, Iniread(@WorkingDir & "\test.ini","Path","FilePath","")) ; SET date into label
            EndIf


    EndSwitch
WEnd

Conrad

Awesome! That was a lot easier than expected thank you very much!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By nacerbaaziz
      good morning sirs.
      please i have a request from you.
      i have an variable to Read a data from a file
      this data is Encrypted
      and when i read it i Decrypte it.
      for that i need a function to Write a ini data to string.
      ;#Function# ===================================================================================================================== ; Name............: _IniReadFromString ; Description.....: Returns the value of a key in a specific section of an ini-formatted string ; Syntax..........: _IniReadFromString($szInput, $szSection, $szKey, $Default) ; Parameters......: ;   $szInput - The string that contains data in ini format ;   $szSection   - The sectionname (just as in IniRead) ;   $szKey   - The keyname (just as in IniRead) ;   $Default - The default value if the key does not exist or reading failed (just as in IniRead) ; Return values ..: ;   Success  - Returns the read value ;   Failure  - Returns $Default ; Author .........: FichteFoll ; Remarks ........: Works for Unicode as well as for ANSI ; Related ........: IniRead, _IniReadSectionFromString ; Link ...........; See on top ; Example ........; $var = _IniReadFromString(StringFormat("[Sect]\r\nMyKey1=value1\r\nMyKey2=value2"), "Sect", "MyKey2", "no_value") ; =============================================================================================================================== Func _IniReadFromString($szInput, $szSection, $szKey, $Default) $szInput = StringStripCR($szInput) ;~  Local $aRegMl = StringRegExp($szInput, "\[" & __StringEscapeRegExp($szSection) & "\]\n+(?:[^\[].*?=.*\n)*" & __StringEscapeRegExp($szKey) & "=(.*)\n?(",3) Local $aRegMl = StringRegExp($szInput, "\[" & __StringEscapeRegExp($szSection) & "\]\n+(?:[^\[].*?=.*\n)*" & __StringEscapeRegExp($szKey) & "=(.*)\n?", 3) If @error Then Return SetError(1, 0, $Default) ; key not found    Return $aRegMl[0] EndFunc;==>_IniReadFromString ; ############################################################################################################################### ; =============================================== ; = Internal Use Only ; =============================================== Func __StringEscapeRegExp($szExp) Return StringRegExpReplace($szExp, "([\(\)\[\]\{\}\\\/\?\.\\|\+])", "\\$1") ; ()[]{}\/?.|+ EndFunc;==>__StringEscapeRegExp like this  function Read the ini from string.
       
       
      please ihelp me
      thanks in advance
    • By nacerbaaziz
      hello sirs,
      i have searched allot about an function that can  read the INI file as a  string
      i mean function to read the ini files from string and not from the file directly.
      i finally found an UDF that do what i want
      but unfortunately all the functions work,  but the function that i want it not working.
      this is the udf
      the function that  i need is _IniReadFromString
      this is the function

      Func _IniReadFromString($szInput, $szSection, $szKey, $Default) $szInput = StringStripCR($szInput) Local $aRegMl = StringRegExp($szInput, "\[" & __StringEscapeRegExp($szSection) & "\]\n+(?:[^\[].*?=.*\n)*" & __StringEscapeRegExp($szKey) & "=(.*)\n?(", 3) If @error Then Return SetError(1, 0, $Default) ; key not found Return $aRegMl[0] EndFunc;==>_IniReadFromString
      i hope that any one can help me
      thank you in advance
      iniex.au3
    • By nacerbaaziz
      hi dears
      am using an ini files as a History
      Sometimes the file size is be larger to 5 MB
      AutoIt does not recognize the full content of the file
      When I did a search to find out why, I discovered that INI files could not be read if they size larger than 64 KB.
      for that I preferred to ask here if is there any way to bypass this obstacle.
      The contents of the file are  as follows
      [filesList]
      c:\...\...\f1.mp3=00:15:20
      c:\...\...\f2.mp3=00:10:20
      c:\...\...\f3.wav=00:59:20
      ....... Etc
      This is the section for reading the file (adapted from my main script)

      case $continue     Local $aArray = IniReadSection($WaitingListFile, StringEncrypt(true, "filesList", $MyPassword))     If Not @error Then Opt("GUICloseOnESC", 1) _GUICtrlListView_DeleteAllItems($scList)         For $i = 1 To $aArray[0][0] $path = path_list(StringEncrypt(false, $aArray[$i][0], $MyPassWord), 1) if FileExists(StringEncrypt(false, $aArray[$i][0], $MyPassWord)) then GUICtrlCreateListViewItem(_GetFileName(FileGetLongName(StringEncrypt(false, $aArray[$i][0], $MyPassWord))) & Opt("GUIDataSeparatorChar") & " : " & Opt("GUIDataSeparatorChar") & FileGetLongName(StringEncrypt(false, $aArray[$i][0], $MyPassWord)), $scList) else $path = $path endIf         Next GUISetState(@sw_disable, $hGUI) GUISetState(@sw_show, $hGUI2) GUICtrlSetState($SClist, $GUI_FOCUS) else if $accessibilitymode = 1 then speak(str("listEmpty")) endIf endIf
      Is there any way to solve this problem, please?
      am waiting your answers...
      Greetings to All
    • By AndreasNWWWWW
      Hi, i'm just curious is there a way to sort an ini file after largest first?
      my inifiles writes itself like this
      14=500
      13=GREY
      12=500
      11=600
      10=600
      9=600
      8=700
      7=700
      5=600
      3=600
      2=800
      1=700
      15=GREY
      4=GREY
       
      but is there a way so i can get it sortet 
      15
      14
      13
      12 
      etc?
    • By AndreasNWWWWW
      Hi, i'm curious if this is even possible, i want to do an action if the ini file contains current values under a section.
      for my test i'm looking for 100,200,300,400,500
      and if any of those excits i want to pop a msgbox with the number in the section.
      i can in my example find one, but it does not check everyone. why?  what am i missing?
      Local $iscore810[5] = [100,200,300,400,500] Local $iMax800 = 5 While 1 ;~     Send("{pause}") ;;func les ini fil     $var = IniReadSection("Area.ini", "modus")     If @error Then         MsgBox(4096, "Error", "Unable to read section.")     Else          For $number = 1 To $var[0][0] If $var[$number][1] == $iscore810[3] Then       MsgBox($MB_SYSTEMMODAL, "FAnt den på", $var[$number][0], 5) EndIf                       Next     EndIf     exit WEnd  
×
×
  • Create New...