Jump to content
nassausky

Autoit Youtube Query

Recommended Posts

nassausky

Hey all,

Has anyone created any queries for youtube? I was thinking it might be something like this but can't quite figure it out:

$oIE = _IECreateEmbedded()
      _IENavigate($oIE,"https://www.youtube.com")
      Local $oForms = _IETagNameGetCollection($oIE, "form")
      Local $sTxt = ""
      For $oForm In $oForms
          If $oForm.id = "masthead-search" Then
             $oInputs = _IETagNameGetCollection($oIE, "input")
             For $oInput In $oInputs
                If $oInput.id = "masthead-search-term" Then
                   _IEFormElementSetValue($oInput, "cards")
                   _IEFormSubmit($oForm)
                EndIf
             Next
          EndIf
       Next

 

Edited by nassausky
Typo

Share this post


Link to post
Share on other sites
JLogan3o13

@nassausky please pay attention to where you post in the future. The Examples forum very clearly states:

Quote

Do not post general support questions here, instead use the AutoIt Help and Support forums.

 


√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites
nassausky

Sorry about that can you move it over or should i copy the question to the right section.

Share this post


Link to post
Share on other sites
JLogan3o13

It is moved to the proper forum


√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites
nassausky

How can their server be smart enough to give this response:

We're sorry...

... but your computer or network may be sending automated queries.

 

So my guess is I'm doing it correctly unless there is some other way around it. 

Edited by nassausky

Share this post


Link to post
Share on other sites
Melba23

nassausky,

Getting that as a reply means that you obviously fall foul of the Forum rules  which forbid the discussion of "Automation of software/sites contrary to their EULA" - so the thread is locked.

M23

 


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • RamDemon
      By RamDemon
      Hi,
      Did anyone tried to  use Redis  with AutoIT as store DB ?
       Redis <-- more about it
      Mladen
    • nooneclose
      By nooneclose
      Hey. I'm working on a new project and was wondering if there is a better way to "update" my Column E array. 
      Here is my code: 
      Local $nI  = 0                                                            ;Creates a name index of 0: nI = Name index Local $nII = 1                                                            ;Creates a name index of 1 for second loop: nII = Name Index 2 For    $iN = 0 To $IndexRows Step 1                                       ;Checks the roster for any names that appear twice      For $iN2 = 0 To $IndexRows Step 1          if $d_Names[$nI] == $d_Names[$nII] And $d_Names[$nII] <> "" Then              Local $timeSheetName = _ArraySearch($e_Names, $d_Names[$nI], 0, 0, 0, 0, 1)              ;MsgBox($MB_SYSTEMMODAL, "Found it", $d_Names[$nI] & " In column E on Row " & $timeSheetName)              Local $eI  = $timeSheetName + 1              ;ConsoleWrite($timeSheetName & @CRLF)              ;ConsoleWrite($eI & @CRLF)              ;ConsoleWrite(@CRLF)              _Excel_RangeInsert($OpenWorkbook.ActiveSheet, "E" & $eI & ":F" & $eI, $xlShiftDown)                                                                          ;Inserts a empty cell in columns E and F.              _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $d_Names[$nII], "E" & $eI)                                                                         ;Fills the empty cell in columns E with the doubled name              $aArray_Index = 2                                           ;Array element counter              For $Index = 2 To $IndexRows Step 1                        ;Loops through every row in the Excel file unto no rows are found or a null row is found                  $Array_Value_E = _Excel_RangeRead($OpenWorkbook, Default, "E"&$Index)                  $e_names[$aArray_Index] = $Array_Value_E                ;While the code loops every value in column E is stored in the E array (updating the array)                  $aArray_Index += 1              Next              ExitLoop          EndIf      Next      $nI  += 1      $nII += 1 Next Basically, It checks a roster for people whose name appears twice then inserts a new "row" for that person because they work in two different departments.
      I have to find that name however in Column E if two appear in column D. My code works but I think it is not as efficient as it could be. 
      Any ideas on how to improve the "update" for my array?
      (once it finds the double names in Column D it then searches for that name by going name by name in the Column E array and once it finds it inserts a new row. However, the E array doesn't have that new row stored in it so I have to "update" the array to properly find the next name)
      Any and all tips would be greatly appreciated. 
       
      NOTE: Just assume I'm opening the excel file properly please do not add that code in, it only complicates your answer. 
    • Miliardsto
      By Miliardsto
      Hello Im wondering if using this https://ohtejera.github.io/ImperiusAutoIt/#started
      UDF can i make that I can control my windows application with phone?
      like for example click button Start on android phone and then something would be done in my windows app?
    • nooneclose
      By nooneclose
      How do I properly convert this to Autoit? This is a VBA macro that I recorded in Excel.
       ActiveSheet.Outline.ShowLevels RowLevels:=2 I need this to close my subtotal once it is finished. 
      any help will be greatly appreciated. 
    • iMacg3
      By iMacg3
      Hi,
      I was looking into a way to delete a registry key (not a specific value, an entire key) if it is present. I was considering using RegRead and RegDelete. However, RegRead appears to only read values, not just keys. Is there a way to delete an entire registry key if it is present? I have heard that the below function may help.
       
      #include-once ; #UDF# ======================================================================================================================= ; Title .........: Reads\Search the name of a Key\Subkey\Value ; AutoIt Version : 3.3.8.1 ; Language ......: English ; Description ...: Lists all Keys\Subkeys\Values in a specified registry key ; Author(s) .....: DXRW4E ; Notes .........: ; =============================================================================================================================== ; #CURRENT# ===================================================================================================================== ;~ _RegEnumKeyEx ;~ _RegEnumValEx ; =============================================================================================================================== #Region ;**** Global constants and vars **** Global Const $sValueTypes[12] = ["REG_NONE","REG_SZ","REG_EXPAND_SZ","REG_BINARY","REG_DWORD","REG_DWORD_BIG_ENDIAN","REG_LINK","REG_MULTI_SZ","REG_RESOURCE_LIST","REG_FULL_RESOURCE_DESCRIPTOR","REG_RESOURCE_REQUIREMENTS_LIST","REG_QWORD"] #EndRegion ;**** Global constants and vars **** ; #FUNCTION# ======================================================================================================================== ; Name...........: _RegEnumKeyEx ; Description ...: Lists all subkeys in a specified registry key ; Syntax.........: _RegEnumKeyEx($KeyName[, $iFlag = 0[, $sFilter = "*"]]) ; Parameters ....: $KeyName - The registry key to read. ; $iFlag - Optional specifies Recursion (add the flags together for multiple operations): ; |$iFlag = 0 (Default) All Key-SubKeys Recursive Mod ; |$iFlag = 1 All SubKeys Not Recursive Mod ; |$iFlag = 2 Include in ArrayList in the first element $KeyName ; |$iFlag = 16 $sFilter do Case-Sensitive matching (By Default $sFilter do Case-Insensitive matching) ; |$iFlag = 32 Disable the return the count in the first element - effectively makes the array 0-based (must use UBound() to get the size in this case). ; By Default the first element ($array[0]) contains the number of strings returned, the remaining elements ($array[1], $array[2], etc.) ; |$iFlag = 64 $sFilter is REGEXP Mod, See Pattern Parameters in StringRegExp ; |$iFlag = 128 Enum value's name (_RegEnumKeyEx Return a 2D array, maximum Array Size limit is 3999744 Key\Value) ; |$iFlag = 256 Reads a value data, this flag will be ignored if the $iFlag = 128 is not set ; $sFilter - Optional the filter to use, default is *. (Multiple filter groups such as "All "*.XXx|*.YYY|*.ZZZ") ; Search the Autoit3 helpfile for the word "WildCards" For details. ; $vFilter - Optional the filter to use for ValueName, $vFilter will be ignored if the $iFlag = 128 is not set ; default is *. (Multiple filter groups such as "All "*.XXx|*.YYY|*.ZZZ") Search the Autoit3 helpfile for the word "WildCards" For details. ; $iValueTypes - Optional, set Value Types to search (Default $iValueTypes = 0 Read All), $iValueTypes will be ignored if the $iFlag = 128 is not set ; (add the flags together for multiple operations): ; 1 = REG_SZ ; 2 = REG_EXPAND_SZ ; 3 = REG_BINARY ; 4 = REG_DWORD ; 5 = REG_DWORD_BIG_ENDIAN ; 6 = REG_LINK ; 7 = REG_MULTI_SZ ; 8 = REG_RESOURCE_LIST ; 9 = REG_FULL_RESOURCE_DESCRIPTOR ; 10 = REG_RESOURCE_REQUIREMENTS_LIST ; 11 = REG_QWORD ; Return values .: Success - Return Array List (See Remarks) ; Failure - @Error ; |1 = Invalid $sFilter ; |2 = No Key-SubKey(s) Found ; |3 = Invalid $vFilter ; |4 = No Value-Name(s) Found ; Author ........: DXRW4E ; Modified.......: ; Remarks .......: The array returned is one-dimensional and is made up as follows: ; $array[0] = Number of Key-SubKeys returned ; $array[1] = 1st Key\SubKeys ; $array[2] = 2nd Key\SubKeys ; $array[3] = 3rd Key\SubKeys ; $array[n] = nth Key\SubKeys ; ; If is set the $iFlag = 128 The array returned is 2D array and is made up as follows: ; $array[0][0] = Number of Key-SubKeys returned ; $array[1][0] = 1st Key\SubKeys ; $array[1][1] = 1st Value name ; $array[1][2] = 1st Value Type (REG_NONE or REG_SZ or REG_EXPAND_SZ ect ect) ; $array[1][3] = 1st Value Data (If is set $iFlag = 256 Else Value Data = "") ; $array[2][0] = 2nd Key\SubKeys ; $array[2][1] = 2nd Value name ; $array[2][2] = 2nd Value Type (REG_NONE or REG_SZ or REG_EXPAND_SZ ect ect) ; $array[2][3] = 2nd Value Data (If is set $iFlag = 256 Else Value Data = "") ; $array[n][0] = nth Key\SubKeys ; Related .......: _RegEnumValEx() ; Link ..........: ; Example .......: _RegEnumKeyEx("HKEY_CURRENT_USER\Software\AutoIt v3") ; Note ..........: ; =================================================================================================================================== Func _RegEnumKeyEx($KeyName, $iFlag = 0, $sFilter = "*", $vFilter = "*", $iValueTypes = 0) If StringRegExp($sFilter, StringReplace("^\s*$|\v|\\|^\||\|\||\|$", Chr(BitAND($iFlag, 64) + 28) & "\|^\||\|\||\|$", "\\\\")) Then Return SetError(1, 0, "") Local $IndexSubKey[101] = [100], $SubKeyName, $BS = "\", $sKeyList, $I = 1, $sKeyFlag = BitAND($iFlag, 1), $sKeyFilter = StringReplace($sFilter, "*", "") If BitAND($iFlag, 2) Then $sKeyList = @LF & $KeyName If Not BitAND($iFlag, 64) Then $sFilter = StringRegExpReplace(BitAND($iFlag, 16) & "(?i)(", "16\(\?\i\)|\d+", "") & StringRegExpReplace(StringRegExpReplace(StringRegExpReplace(StringRegExpReplace($sFilter, "[^*?|]+", "\\Q$0\\E"), "\\E(?=\||$)", "$0\$"), "(?<=^|\|)\\Q", "^$0"), "\*+", ".*") & ")" While $I $IndexSubKey[$I] += 1 $SubKeyName = RegEnumKey($KeyName, $IndexSubKey[$I]) If @error Then $IndexSubKey[$I] = 0 $I -= 1 $KeyName = StringLeft($KeyName, StringInStr($KeyName, "\", 1, -1) - 1) ContinueLoop EndIf If $sKeyFilter Then If StringRegExp($SubKeyName, $sFilter) Then $sKeyList &= @LF & $KeyName & $BS & $SubKeyName Else $sKeyList &= @LF & $KeyName & $BS & $SubKeyName EndIf If $sKeyFlag Then ContinueLoop $I += 1 If $I > $IndexSubKey[0] Then $IndexSubKey[0] += 100 ReDim $IndexSubKey[$IndexSubKey[0] + 1] EndIf $KeyName &= $BS & $SubKeyName WEnd If Not $sKeyList Then Return SetError(2, 0, "") If BitAND($iFlag, 128) <> 128 Then Return StringSplit(StringTrimLeft($sKeyList, 1), @LF, StringReplace(BitAND($iFlag, 32), "32", 2)) $sKeyList = _RegEnumValEx(StringSplit(StringTrimLeft($sKeyList, 1), @LF), $iFlag, $vFilter, $iValueTypes) Return SetError(@Error, 0, $sKeyList) EndFunc ; #FUNCTION# ======================================================================================================================== ; Name...........: _RegEnumValEx ; Description ...: Lists all values in a specified registry key ; Syntax.........: _RegEnumValEx($KeyName[, $iFlag = 0[, $sFilter = "*"]]) ; Parameters ....: $KeyName - The registry key to read Or one-dimensional array RegKeyList ; use _RegEnumKeyEx() to get $RegKeyList (example $RegKeyList = [3, 1st Key\SubKeys, 2st Key\SubKeys, nth Key\SubKeys]) ; |$iFlag = 16 $sFilter do Case-Sensitive matching (By Default $sFilter do Case-Insensitive matching) ; |$iFlag = 32 Disable the return the count in the first element - effectively makes the array 0-based (must use UBound() to get the size in this case). ; By Default the first element ($array[0]) contains the number of strings returned, the remaining elements ($array[1], $array[2], etc.) ; |$iFlag = 64 $sFilter is REGEXP Mod, See Pattern Parameters in StringRegExp ; |$iFlag = 256 Reads a value data ; $sFilter - Optional the filter to use, default is *. (Multiple filter groups such as "All "*.XXx|*.YYY|*.ZZZ") ; Search the Autoit3 helpfile for the word "WildCards" For details. ; $iValueTypes - Optional, set Value Types to search (Default $iValueTypes = 0 Read All) ; (add the flags together for multiple operations): ; 1 = REG_SZ ; 2 = REG_EXPAND_SZ ; 3 = REG_BINARY ; 4 = REG_DWORD ; 5 = REG_DWORD_BIG_ENDIAN ; 6 = REG_LINK ; 7 = REG_MULTI_SZ ; 8 = REG_RESOURCE_LIST ; 9 = REG_FULL_RESOURCE_DESCRIPTOR ; 10 = REG_RESOURCE_REQUIREMENTS_LIST ; 11 = REG_QWORD ; Return values .: Success - Return Array List (See Remarks) ; Failure - @Error ; |3 = Invalid $sFilter ; |4 = No Value-Name(s) Found ; Author ........: DXRW4E ; Modified.......: ; Remarks .......: The array returned is 2D array and is made up as follows: ; $array[0][0] = Number of Key-SubKeys returned ; $array[1][0] = 1st Key\SubKeys ; $array[1][1] = 1st Value name ; $array[1][2] = 1st Value Type (REG_NONE or REG_SZ or REG_EXPAND_SZ ect ect) ; $array[1][3] = 1st Value Data (If is set $iFlag = 256 Else Value Data = "") ; $array[2][0] = 2nd Key\SubKeys ; $array[2][1] = 2nd Value name ; $array[2][2] = 2nd Value Type (REG_NONE or REG_SZ or REG_EXPAND_SZ ect ect) ; $array[2][3] = 2nd Value Data (If is set $iFlag = 256 Else Value Data = "") ; $array[n][0] = nth Key\SubKeys ; Related .......: _RegEnumKeyEx() ; Link ..........: ; Example .......: _RegEnumValEx("HKEY_CURRENT_USER\Software\AutoIt v3") ; Note ..........: ; =================================================================================================================================== Func _RegEnumValEx($aKeyList, $iFlag = 0, $sFilter = "*", $iValueTypes = 0) If StringRegExp($sFilter, "\v") Then Return SetError(3, 0, "") If Not IsArray($aKeyList) Then $aKeyList = StringSplit($aKeyList, @LF) Local $aKeyValList[1954][4], $iKeyVal = Int(BitAND($iFlag, 32) = 0), $sKeyVal = 1953, $sRegEnumVal, $iRegEnumVal, $RegRead = BitAND($iFlag, 256), $vFilter = StringReplace($sFilter, "*", "") If Not BitAND($iFlag, 64) Then $sFilter = StringRegExpReplace(BitAND($iFlag, 16) & "(?i)(", "16\(\?\i\)|\d+", "") & StringRegExpReplace(StringRegExpReplace(StringRegExpReplace(StringRegExpReplace($sFilter, "[^*?|]+", "\\Q$0\\E"), "\\E(?=\||$)", "$0\$"), "(?<=^|\|)\\Q", "^$0"), "\*+", ".*") & ")" For $i = 1 To $aKeyList[0] $iRegEnumVal = 0 While 1 If $iKeyVal = $sKeyVal Then If $sKeyVal = 3999744 Then ExitLoop $sKeyVal *= 2 ReDim $aKeyValList[$sKeyVal + 1][4] EndIf $aKeyValList[$iKeyVal][0] = $aKeyList[$i] $iRegEnumVal += 1 $sRegEnumVal = RegEnumVal($aKeyList[$i], $iRegEnumVal) If @Error <> 0 Then If $iRegEnumVal = 1 And $vFilter = "" Then $iKeyVal += 1 ExitLoop EndIf $aKeyValList[$iKeyVal][2] = $sValueTypes[@Extended] If BitAND(@Extended, $iValueTypes) <> $iValueTypes Then ContinueLoop If $vFilter And Not StringRegExp($sRegEnumVal, $sFilter) Then ContinueLoop $aKeyValList[$iKeyVal][1] = $sRegEnumVal If $RegRead Then $aKeyValList[$iKeyVal][3] = RegRead($aKeyList[$i], $sRegEnumVal) $iKeyVal += 1 WEnd Next $sRegEnumVal = $iKeyVal - Int(BitAND($iFlag, 32) = 0) If Not $sRegEnumVal Or ($sRegEnumVal = 1 And $vFilter = "" And $aKeyValList[$iKeyVal - $sRegEnumVal][2] = "") Then Return SetError(4, 0, "") ReDim $aKeyValList[$iKeyVal][4] If Not BitAND($iFlag, 32) Then $aKeyValList[0][0] = $iKeyVal - 1 Return $aKeyValList EndFunc Thanks.
       
×