Jump to content
Slipk

Move ListViewItems up and down

Recommended Posts

Hello,

I tried with many methods and searched a lot for items to move up and down but couldn't find it.

Sorry for my bad english.

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <GuiListView.au3>
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 307, 247, 192, 124)
GUISetFont(10, 400, 0, "Arial")
$ListView1 = GUICtrlCreateListView("C1|C2|C3", 0, 0, 250, 246)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 50)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 1, 60)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 2, 100)
GUICtrlCreateListViewItem("Test1|Test2|Test3", $ListView1)
GUICtrlCreateListViewItem("Cat|Dog|Fish", $ListView1)
GUICtrlCreateListViewItem("ABC|DEF|GHI", $ListView1)
$Button1 = GUICtrlCreateButton("/\", 264, 8, 27, 25)
GUICtrlSetFont(-1, 10, 800, 0, "Arial")
$Button2 = GUICtrlCreateButton("\/", 264, 40, 27, 25)
GUICtrlSetFont(-1, 10, 800, 0, "Arial")
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

        Case $Button1 ;up

        Case $Button2 ;down

    EndSwitch
WEnd

 

Thank you for your help!

Share this post


Link to post
Share on other sites

Slipk,

My GUIListViewEx UDF (look in my sig for the link) will do this - and a lot more!

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Slipk
      Hello everybody,
      #include <GUIConstantsEx.au3> #include <ListViewConstants.au3> #include <WindowsConstants.au3> #include <GUIListViewEx.au3> $Form1 = GUICreate("Form1", 539, 350, 192, 124) $ListView1 = GUICtrlCreateListView("CLM1|CLM2", 0, 0, 538, 326) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 150) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 1, 150) Local $dynamic = GUICtrlCreateListViewItem("Example1|Example2", $ListView1) $SubMenu = GUICtrlCreateContextMenu($dynamic) $Run = GUICtrlCreateMenuItem("Run", $SubMenu) $Edit = GUICtrlCreateMenuItem("Edit", $SubMenu) $Delete = GUICtrlCreateMenuItem("Delete", $SubMenu) Local $dynamic2 = GUICtrlCreateListViewItem("Example3|Example6", $ListView1) $SubMenu = GUICtrlCreateContextMenu($dynamic2) $Run = GUICtrlCreateMenuItem("Run", $SubMenu) $Edit = GUICtrlCreateMenuItem("Edit", $SubMenu) $Delete = GUICtrlCreateMenuItem("Delete", $SubMenu) _GUIListViewEx_Init($ListView1, "", 0, 0, True, 64) _GUIListViewEx_MsgRegister() GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd I use GUIListViewEx.au3 for position of items in listview but when I move one the context menu disappear. Any solution of this?
      Any method than array it is possible?
      Thank you, appreciate it.
       
       
    • By Slipk
      Hello everybody,
      I download the GUIListViewEx.au3 by Melba23 in order to move up or down my items from a listview.
      Everything it's looking good in script but when I move an item it will crash.
      Any suggestions?
      Thank you! 

    • By Slipk
      Hello everybody,
      Sorry for my bad english.
       
      I try to figure out if I have a dynamic listview with as many items as I want, how to save to a text file all the data listview contains in the same form that you put when you create a listviewitem. I will give you an example.
      When the script is running it will show you the listview and some items. How to take the items data "Data1|Data1_Sub1|Data1_Sub2" in this format and paste into a text file? All of them.
      I tried to explain as good as I can.
      Thank you for your attention!
      #include <GUIConstantsEx.au3> #include <ListViewConstants.au3> #include <WindowsConstants.au3> $Form_Menu = GUICreate("Form Example", 351, 234, -1, -1) $Form_Menu_ListView1 = GUICtrlCreateListView("Column #1|Column #2|Column #3", 0, 0, 346, 230) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 75) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 1, 75) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 2, 75) GUICtrlCreateListViewItem("Data1|Data1_Sub1|Data1_Sub2", $Form_Menu_ListView1) GUICtrlCreateListViewItem("Data2|Data2_Sub1|Data2_Sub2", $Form_Menu_ListView1) GUICtrlCreateListViewItem("DataN|DataN_SubN|DataN_SubN", $Form_Menu_ListView1) ;The data that appear in the listview be saved in a file like that : #cs Data1|Data1_Sub1|Data1_Sub2 Data2|Data2_Sub1|Data2_Sub2 DataN|DataN_SubN|DataN_SubN #ce GUISetState(@SW_SHOW, $Form_Menu) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd
    • By Broihon
      Hey guys,

      I ran into a problem when I wanted to delete items of a listview using the delete key. My approach is to register my own WndProc for the listview and then filter the $WM_GETDLGCODE msg and then call the original WndProc.
      That works like a charm. The problem is that when the listview gets redrawn it somehow ends up in an infinite loop. The listview is suddenly emtpy and I can't interact with any controls of the GUI at all. Here's the code:
       
      #include <GUIConstantsEx.au3> #include <GUIListView.au3> #include <WinAPI.au3> $h_GUI = GUICreate("Test", 200, 200, 350, 350) $h_LV = GUICtrlCreateListView("Col 1|Col 2|Col 3", 0, 0, 200, 200) _GUICtrlListView_AddItem($h_LV, "") _GUICtrlListView_AddSubItem($h_LV, 0, "bla0", 0) _GUICtrlListView_AddSubItem($h_LV, 0, "bla0", 1) _GUICtrlListView_AddSubItem($h_LV, 0, "bla0", 2) _GUICtrlListView_AddItem($h_LV, "") _GUICtrlListView_AddSubItem($h_LV, 1, "bla1", 0) _GUICtrlListView_AddSubItem($h_LV, 1, "bla1", 1) _GUICtrlListView_AddSubItem($h_LV, 1, "bla1", 2) _GUICtrlListView_AddItem($h_LV, "") _GUICtrlListView_AddSubItem($h_LV, 2, "bla2", 0) _GUICtrlListView_AddSubItem($h_LV, 2, "bla2", 1) _GUICtrlListView_AddSubItem($h_LV, 2, "bla2", 2) _GUICtrlListView_AddItem($h_LV, "") _GUICtrlListView_AddSubItem($h_LV, 3, "bla3", 0) _GUICtrlListView_AddSubItem($h_LV, 3, "bla3", 1) _GUICtrlListView_AddSubItem($h_LV, 3, "bla3", 2) $h_LV_NewWndProc = DllCallbackRegister("WndProc_LV", "int", "hwnd;uint;wparam;lparam") $g_LV_OldWndProc = _WinAPI_SetWindowLong(GUICtrlGetHandle($h_LV), $GWL_WNDPROC, DllCallbackGetPtr($h_LV_NewWndProc)) GUISetState(@SW_SHOW) Func WndProc_LV($hWnd, $uMsg, $wParam, $lParam) Return _WinAPI_CallWindowProc($g_LV_OldWndProc, $hWnd, $uMsg, $wParam, $lParam) EndFunc ;==>WndProc_GUI Do Until GUIGetMsg() = $GUI_EVENT_CLOSE DllCallbackFree($h_LV_NewWndProc) As you can see I'm doing nothing in the WndProc of the listview. I'm simply calling the original WndProc. This still "freezes" when I mess with the width of the columns or in the original project when I add more items that they don't fit in the listview and I have to scroll. If I don't do that it's working fine.
    • By c.haslam
      I have
      Local $idListview = GUICtrlCreateListView("",8,8,@DesktopWidth/2-16,@DesktopHeight-150,$LVS_SHOWSELALWAYS, _ $LVS_EX_INFOTIP) Local $hListView = GUICtrlGetHandle($idListview) _GUICtrlListView_InsertColumn($hListview, 0, "Filename", 400) _GUICtrlListView_InsertColumn($hListview, 1, "Ext", 50) _GUICtrlListView_InsertColumn($hListview, 2, "Size",70) _GUICtrlListView_InsertColumn($hListview, 3, 'Date time',100) _GUICtrlListView_InsertColumn($hListview, 4, "Path", 385) _GUICtrlListView_InsertColumn($hListview, 5, "sizeInt", 0) _GUICtrlListView_JustifyColumn($hListview, $kSize,1) ; right align then further on
      While True $sFnamExt = FileFindNextFile($iSrch) If @error Then ExitLoop EndIf $sAtts = FileGetAttrib($sPath&'\'&$sFnamExt) If StringInStr($sAtts,'D') Then If $sFnamExt<>'$RECYCLE.BIN' Then $sDirs &= '?'&$sPath&'\'&$sFnamExt EndIf Else $p = StringInStr($sFnamExt,'.',0,-1) ; last If $p=0 Then $sFnam = $sFnamExt $sExt = '' Else $sFnam = StringLeft($sFnamExt,$p-1) $sExt = StringTrimLeft($sFnamExt,$p) EndIf _GUICtrlListView_AddItem($hListview,$sFnam,-1,_GUICtrlListView_GetItemCount($hListview)+1000) _GUICtrlListView_AddSubItem($hListview,$nItem,$sExt,$kExt) $nSize = FileGetSize($sPath&'\'&$sFnamExt) $sSize = AddThousandsSeparator($nsize) _GUICtrlListView_AddSubItem($hListview,$nItem,$sSize,$kSize) _GUICtrlListView_AddSubItem($hListview,$nItem,$nsize,$kSizeInt) $nTotBytes += $nSize $a1 = FileGetTime($sPath&'\'&$sFnamExt,$FT_MODIFIED,$FT_ARRAY) $t = $a1[0]&'-'&$a1[1]&'-'&$a1[2]&' '&$a1[3]&':'&$a1[4] _GUICtrlListView_AddSubItem($hListview,$nItem,$t,$kDateTime) _GUICtrlListView_AddSubItem($hListview,$nItem,$sPath,$kPath) If $gSQL Then $s = "Insert into tbl values ("&_SQLite_Escape($sFnam)&","&_SQLite_Escape($sExt)&",'"& _ $sSize&"','"& _ $t&"',"&_SQLite_Escape($sPath)&","&$nSize&")" _SQLite_Exec(-1,$s) If @error Then MsgBox(0,@ScriptLineNumber,_SQLite_ErrMsg()) EndIf EndIf EndIf WEnd FileClose($iSrch) You will see that I heeded the advice in Help > _GUICtrlListView_AddItem: "As AutoIt uses the $iParam parameter to store the controlID of native-created ListView items, this value should be set sufficiently high for UDF-created items to avoid possible conflict with any existing controls - a starting value of 1000 is recommended."
      (It's unfortunate that the Example does not heed this advice. OK, it doesn't need to because there are no other controls, but still --- it would help neophytes if it did. Also to me _GUICtrlListView_AddItem is not native because it is a UDF. Confused?)
      My script then does a sort using SQLite, and updates the ListView:
      Local $hQuery Local $colNames = ['fnam','ext','nsize','dateTime','path','SizeInt'] Local $s = "Select * FROM tbl ORDER BY "&$colNames[$ncol]&';' _SQLite_Query(-1,$s, $hQuery) If @error Then MsgBox(0,@ScriptLineNumber,_SQLite_ErrMsg()) EndIf Local $aRow[$kSizeInt+1] Local $iItem=-1 While _SQLite_FetchData($hQuery, $aRow, False, False) = $SQLITE_OK ; Read Out the next Row If @error Then MsgBox(0,@ScriptLineNumber,_SQLite_ErrMsg()) EndIf $iItem += 1 For $i = $kFnam To $kSizeInt _GUICtrlListView_SetItem($hListview,$aRow[$i],$iItem,$i,Default) Next WEnd This works, but I had earlier coded
      _GUICtrlListView_SetItem($hListview,$aRow[$i],$iItem,$i,Default,$iItem+1000) because the same advice is in the Help for this function.
      So my care in specifying $param back-fired! What am I not understanding?
      The only difference in what works is that the $param parameter is defaulted.
×
×
  • Create New...