Jump to content
Slipk

GUIListViewEx don't save context menu

Recommended Posts

Hello everybody,

#include <GUIConstantsEx.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <GUIListViewEx.au3>

$Form1 = GUICreate("Form1", 539, 350, 192, 124)
$ListView1 = GUICtrlCreateListView("CLM1|CLM2", 0, 0, 538, 326)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 150)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 1, 150)

Local $dynamic = GUICtrlCreateListViewItem("Example1|Example2", $ListView1)
$SubMenu = GUICtrlCreateContextMenu($dynamic)

$Run = GUICtrlCreateMenuItem("Run", $SubMenu)
$Edit = GUICtrlCreateMenuItem("Edit", $SubMenu)
$Delete = GUICtrlCreateMenuItem("Delete", $SubMenu)

Local $dynamic2 = GUICtrlCreateListViewItem("Example3|Example6", $ListView1)
$SubMenu = GUICtrlCreateContextMenu($dynamic2)

$Run = GUICtrlCreateMenuItem("Run", $SubMenu)
$Edit = GUICtrlCreateMenuItem("Edit", $SubMenu)
$Delete = GUICtrlCreateMenuItem("Delete", $SubMenu)

_GUIListViewEx_Init($ListView1, "", 0, 0, True, 64)
_GUIListViewEx_MsgRegister()

GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd

I use GUIListViewEx.au3 for position of items in listview but when I move one the context menu disappear. Any solution of this?

Any method than array it is possible?

Thank you, appreciate it.

 

 

Share this post


Link to post
Share on other sites

Slipk,

Why are you creating the same menu for each item? For a start you are constantly overwriting the same variable with the new ControlIDs, which means that you will only ever get the menu to work. Just apply the context menu to the whole ListView and use _GUIListViewEx_ContextPos to determine which item was last right-clicked. Example 6 in the UDF zip shows you how to do it.

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Hello Melba,

The problem is the next one.

 

This script above it's just an example. An user can create dynamically an infinite number of listviewitems that must have the context menu when you right click.

At all of them it has to do the same thing, so it's not a problem.

 

It's there any way to count all items from up to down after it moves them and attribute the context menu at every item without knowing the variable?

Thanks.

Share this post


Link to post
Share on other sites

Slipk,

Read what I said and run the example I mentioned. You create a context menu for the whole ListView and then the UDF will tell you which item was clicked so you can do whatever is necessary.

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Slipk,

Glad I could help.

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

@M23: is there a similar method to use for edit controls on a gui?  I understand how listview elements can share a context menu. But what about controls on a gui?

For example, if I have 3 edit controls, I've been defining individual context menus that are essentially the same menu. What I want to avoid is having the context menu appear when I click elsewhere on the GUI (away from the edit controls).

Am I approaching this the wrong way?  Is this an instance where _GUICtrlMenu_TrackPopupMenu should be used?

Thanks.

Share this post


Link to post
Share on other sites

qwert,

No idea. I suggest opening a new thread as this one will not attract much attention from others given that its title refers to my UDF.

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Slipk
      Hello everybody,
      I download the GUIListViewEx.au3 by Melba23 in order to move up or down my items from a listview.
      Everything it's looking good in script but when I move an item it will crash.
      Any suggestions?
      Thank you! 

    • By Slipk
      Hello everybody,
      Sorry for my bad english.
       
      I try to figure out if I have a dynamic listview with as many items as I want, how to save to a text file all the data listview contains in the same form that you put when you create a listviewitem. I will give you an example.
      When the script is running it will show you the listview and some items. How to take the items data "Data1|Data1_Sub1|Data1_Sub2" in this format and paste into a text file? All of them.
      I tried to explain as good as I can.
      Thank you for your attention!
      #include <GUIConstantsEx.au3> #include <ListViewConstants.au3> #include <WindowsConstants.au3> $Form_Menu = GUICreate("Form Example", 351, 234, -1, -1) $Form_Menu_ListView1 = GUICtrlCreateListView("Column #1|Column #2|Column #3", 0, 0, 346, 230) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 75) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 1, 75) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 2, 75) GUICtrlCreateListViewItem("Data1|Data1_Sub1|Data1_Sub2", $Form_Menu_ListView1) GUICtrlCreateListViewItem("Data2|Data2_Sub1|Data2_Sub2", $Form_Menu_ListView1) GUICtrlCreateListViewItem("DataN|DataN_SubN|DataN_SubN", $Form_Menu_ListView1) ;The data that appear in the listview be saved in a file like that : #cs Data1|Data1_Sub1|Data1_Sub2 Data2|Data2_Sub1|Data2_Sub2 DataN|DataN_SubN|DataN_SubN #ce GUISetState(@SW_SHOW, $Form_Menu) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd
    • By Slipk
      Hello,
      I tried with many methods and searched a lot for items to move up and down but couldn't find it.
      Sorry for my bad english.
      #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <ListViewConstants.au3> #include <WindowsConstants.au3> #include <GuiListView.au3> #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 307, 247, 192, 124) GUISetFont(10, 400, 0, "Arial") $ListView1 = GUICtrlCreateListView("C1|C2|C3", 0, 0, 250, 246) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 50) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 1, 60) GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 2, 100) GUICtrlCreateListViewItem("Test1|Test2|Test3", $ListView1) GUICtrlCreateListViewItem("Cat|Dog|Fish", $ListView1) GUICtrlCreateListViewItem("ABC|DEF|GHI", $ListView1) $Button1 = GUICtrlCreateButton("/\", 264, 8, 27, 25) GUICtrlSetFont(-1, 10, 800, 0, "Arial") $Button2 = GUICtrlCreateButton("\/", 264, 40, 27, 25) GUICtrlSetFont(-1, 10, 800, 0, "Arial") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1     $nMsg = GUIGetMsg()     Switch $nMsg         Case $GUI_EVENT_CLOSE             Exit         Case $Button1 ;up         Case $Button2 ;down     EndSwitch WEnd  
      Thank you for your help!
    • By jimmy123j
      I wan't to use the ListView to create a option table for right click, and get the item or subitem text for specific target
      I use the _GUIListViewEx_ContextPos(), but can't get the row and col, always show the -1 and -1

      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <AutoItConstants.au3> #include <StaticConstants.au3> #include <EditConstants.au3> #include <File.au3> #include <Misc.au3> #include <String.au3> #include <Array.au3> #include "GUIListViewEx.au3" $GUI = GUICreate("Test", 500, 400) $LV = GUICtrlCreateListView("1|2|3", 1, 1, 468, 398) For $i = 1 to 9 GUICtrlCreateListViewItem ("1" & $i & "|2" & $i & "|3" & $i , $LV) Next $mContextmenu = GUICtrlCreateContextMenu($LV) $GetPos = GUICtrlCreateMenuItem("Get Pos", $mContextmenu) GUICtrlCreateMenuItem("", $mContextmenu) $TestA= GUICtrlCreateMenuItem("A", $mContextmenu) $TestB= GUICtrlCreateMenuItem("B", $mContextmenu) GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit Case $GetPos $Pos = _GUIListViewEx_ContextPos() _ArrayDisplay($Pos) EndSwitch WEnd  
       
    • By Broihon
      Hey guys,

      I ran into a problem when I wanted to delete items of a listview using the delete key. My approach is to register my own WndProc for the listview and then filter the $WM_GETDLGCODE msg and then call the original WndProc.
      That works like a charm. The problem is that when the listview gets redrawn it somehow ends up in an infinite loop. The listview is suddenly emtpy and I can't interact with any controls of the GUI at all. Here's the code:
       
      #include <GUIConstantsEx.au3> #include <GUIListView.au3> #include <WinAPI.au3> $h_GUI = GUICreate("Test", 200, 200, 350, 350) $h_LV = GUICtrlCreateListView("Col 1|Col 2|Col 3", 0, 0, 200, 200) _GUICtrlListView_AddItem($h_LV, "") _GUICtrlListView_AddSubItem($h_LV, 0, "bla0", 0) _GUICtrlListView_AddSubItem($h_LV, 0, "bla0", 1) _GUICtrlListView_AddSubItem($h_LV, 0, "bla0", 2) _GUICtrlListView_AddItem($h_LV, "") _GUICtrlListView_AddSubItem($h_LV, 1, "bla1", 0) _GUICtrlListView_AddSubItem($h_LV, 1, "bla1", 1) _GUICtrlListView_AddSubItem($h_LV, 1, "bla1", 2) _GUICtrlListView_AddItem($h_LV, "") _GUICtrlListView_AddSubItem($h_LV, 2, "bla2", 0) _GUICtrlListView_AddSubItem($h_LV, 2, "bla2", 1) _GUICtrlListView_AddSubItem($h_LV, 2, "bla2", 2) _GUICtrlListView_AddItem($h_LV, "") _GUICtrlListView_AddSubItem($h_LV, 3, "bla3", 0) _GUICtrlListView_AddSubItem($h_LV, 3, "bla3", 1) _GUICtrlListView_AddSubItem($h_LV, 3, "bla3", 2) $h_LV_NewWndProc = DllCallbackRegister("WndProc_LV", "int", "hwnd;uint;wparam;lparam") $g_LV_OldWndProc = _WinAPI_SetWindowLong(GUICtrlGetHandle($h_LV), $GWL_WNDPROC, DllCallbackGetPtr($h_LV_NewWndProc)) GUISetState(@SW_SHOW) Func WndProc_LV($hWnd, $uMsg, $wParam, $lParam) Return _WinAPI_CallWindowProc($g_LV_OldWndProc, $hWnd, $uMsg, $wParam, $lParam) EndFunc ;==>WndProc_GUI Do Until GUIGetMsg() = $GUI_EVENT_CLOSE DllCallbackFree($h_LV_NewWndProc) As you can see I'm doing nothing in the WndProc of the listview. I'm simply calling the original WndProc. This still "freezes" when I mess with the width of the columns or in the original project when I add more items that they don't fit in the listview and I have to scroll. If I don't do that it's working fine.
×
×
  • Create New...