Jump to content

Put a ListView on top of an image in a tab


Recommended Posts

Hi everyone,

I have created a ListView that is in a tab, and I want to display an image in that tab, with the ListView on top.

However, the image still appears on top of my ListView.
If I remove the tabs everything works. :huh:

I looked at the autoit documentation and the <GuiListView.au3> documentation , I can't figure out how to display a background image, and put on top a ListView, inside a tab. 😥

Here is the code:

Opt("GUIOnEventMode", 1)
$Form1 = GUICreate($Titre, 700, 627, $Form1Width, $Form1Height); main window

$tabulation = GUICtrlCreateTab(148,0,700,580); creating tabs

$tab1=GUICtrlCreateTabItem("Tab 1"); first tab
GUICtrlSetState(-1, $GUI_SHOW); this tab is selected by default

$Pic1 = GUICtrlCreatePic("image.jpg", 0, 30, 700, 627)
GUICtrlSetState(-1, $GUI_DISABLE).

$idListview = GUICtrlCreateListView("list 1|list 2|list 3", 200, 50, 390, 200)

GUISetState(@SW_SHOW)
While 1
    Sleep(100)
WEnd

Thank you in advance.

tab test.png

Edited by Cengokill
GUICtrlSetState(-1, $GUI_DISABLE).

-- Cengokill --

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AntS
      Help! The mouse clicks I'm sending to a control on a dialog box produce no response.
      The dialog box in question handles advanced display properties. The tab page my script interacts with is created by Trident Microsystems. It allows the user to enhance or attenuate the screen's RGB values. (See image.) My script automates the process of changing these in order to adjust the screen's hue or, when the red, green and blue values are all the same, the brightness.
      Producing a script to change the brightness has been quite straightforward. I use ControlClick() to send a mouse click to one of the trackbars on the right of the tab page. By default, they're linked and so move as one. The difficulty I'm having however is in automating the process when the desired red, green and blue values aren't the same as each other.
      Ordinarily, there are three ways of doing this: 
      (1) clear the Link check box to unlink the three trackbars then either click on each trackbar or drag their sliders,
      (2) clear the Link tick-box then for each colour, click on the corresponding trackbar slider (to select it) then click on a point on the graph, and
      (3) click on the Load button to open an Open dialog box and load a preset (stored as a .gam file).
      However, when ControlClick() is used to clear the Link check box or to push the Load button, nothing happens. Making the dialog box the active window makes no difference.
      The AutoIt Window Info tool indicates that the Reload a Bitmap, Save, Load and Reset buttons, the Link check box and the graph are all the same control. (See other images.) In fact, it there are only four controls on the page: the tab page, which is an instance of a SysTabControl32 class, and the three trackbars, each of which is an instance of the TridentTrackBar class. (Am unsure whether the SysTabControl32 class is a Windows or third-party control.)
      What's the solution?
      Note that the MouseClick() function—as opposed to ControlClick()—does work, but having AutoIt commandeer the screen pointer isn't an acceptable solution.
      For the sake of completeness, here's the relevant code fragment for the Link check box. 
      ;unlink trackbars WinActivate("(Multiple Monitors)") ControlClick("(Multiple Monitors)", "", 12320, "left", 1, 211, 252)  



    • By UEZ
      This project has been discontinued!
       
      Here a small tool I wrote to update my Sysinternal tools collection without the need to download always the whole package or visiting the site to check for updates. I know that there are several tools available (also some tools written in AutoIt) but here another one for the collection. It was good exercise for me to code it.
       
       
        
       
       
      Some files from the live web site cannot be downloaded although they are visible!
       
      Here the download link of the source code only: AutoIt Sysinternal Tools Synchronizer v0.99.6 build 2020-09-23 beta.7z  (1557 downloads previously)
      -=> Requires AutoIt version 3.3.13.20 or higher / tested on Win8.1 real machine and some VMs: Win7 / Vista / Win10
       
      Compiled exe only: @MediaFire
       
      Just select the Sysinternal Tools folder or create one and press the synchronize button to download the selected items. Click on AutoIt label (near to left upper corner) to open menu.
       
      Special thanks to LarsJ, Melba23 and mesale0077 for their help. 
       
      I've still some ideas to implement which are more gimmick related, so it is not finished yet...
      If you want to add your language please check out #Region Language. Thanks. 
       
      Please report any bug or if you have any suggestions.
       
      The language of the tool tip from each of the executable in the left list view were automatically created using Google translator and weren't checked for correctness.
       
      Br,
      UEZ
    • By DrJohn
      Hello all.  It's me again.
      I've got a ListView with an associated ImageList to display icons.  What I seem to be hung up on is how to keep the ImageList updated to match the ListView as the latter changes.  I thought it was the case that the indices of the items in the ListView and those in the ImageList just needed to match.  So, for example, if I:
      Delete an item from the ListView [_GUICtrlListView_DeleteItem()], and also delete the image at the matching index in the ImageList [_GUIImageList_Remove()]. Then add a new item to the end of the ListView [_GUICtrlListView_AddItem()], and correspondingly add an image at the end of the ImageList [_GUIImageList_AddIcon()] Shouldn't everything stay in sync?
      Here's the code I thought would work:
      #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <FontConstants.au3> #include <WindowsConstants.au3> #include <GuiImageList.au3> Test() func Test() $gui = GUICreate("Test", 400, 300) ; Create ListView $lv = _GUICtrlListView_Create($gui, "", 10, 10, 380, 240, $LVS_DEFAULT) _GUICtrlListView_AddColumn($lv, "Col1", 50) _GUICtrlListView_AddColumn($lv, "Col2", 50) for $i = 0 to 2 $s = StringFormat("%d,1", $i+1) _GUICtrlListView_AddItem($lv, $s, $i) $s = StringFormat("%d,2", $i+1) _GUICtrlListView_AddSubItem($lv, $i, $s, 1) next ; Add ImageList $img_list = _GUIImageList_Create(16, 16, 5, 3) for $i = 0 to 2 $ico = StringFormat("%d.ico", $i+1) _GUIImageList_AddIcon($img_list, $ico) next _GUICtrlListView_SetImageList($lv, $img_list, 1) ; $btn = GUICtrlCreateButton("Test", 10, 260, 60, 30) GUISetState(@SW_SHOW) HotKeySet("^q", Quit) ; Loop until the user exits. while True switch GUIGetMsg() case $GUI_EVENT_CLOSE Exit case $btn ; Remove 2nd list item and image _GUICtrlListView_DeleteItem($lv, 1) _GUIImageList_Remove($img_list, 1) ; Add new item to end of ListView $idx = _GUICtrlListView_AddItem($lv, "foo") _GUICtrlListView_AddSubItem($lv, $idx, "bar", 1) ; Add new image to end of ImageList _GUIImageList_AddIcon($img_list, "5.ico") endswitch wend GUIDelete() endfunc func Quit() Exit endfunc What seems to happen is that when the new item is added to the ListView, its icon is 1.ico (the first item in the ImageList), rather than 5.ico (the newly added item that should be at the end of the ImageList).
      Or do I need to re-create the whole ImageList any time the ListView changes?
      A zip file is attached that contains the script and also the .ico files, for easier testing.
      Thanks!
      /John
      test.zip
    • By Dan_555
      Hi.
      I'm using the FreeCommander XE file manager here, and i'v written a script, which will create an empty, new file, after choosing an extension out from the Listbox.
       
      The listview code  is not mine, iv found the scripts somewhere on this forum. I have no credits in it, because it was intended to be only for my personal use.
      But now, i have a lot of free time, so i remembered that i haven't posted anything on this forum, yet, so here is my first script:
      It should be compiled with the Autoit v3.3.14.3 .
      The compiled exe needs a folder passed as a parameter, so that it know where to create the new file.
      A Listbox is opened, with a selection of available extensions.
      After selecting and doubleclicking (or using the ok button), the script creates a filename (if specified in the config file) with increased numbers (up to 9999).
      If the filename exist, the counter is checking the next number, until the maximum is reached.
      This script uses an ini file for configuration, called "NewFile.ini" which should be in the same folder, as the compiled exe.
      NewFile.au3
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <GuiListView.au3> #include <String.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <EditConstants.au3> #include <GuiEdit.au3> #include <ScrollBarsConstants.au3> Global $test[0][2], $hFile, $cmd = "", $cmdtmp, $tmptxt, $tmpinidir, $filesetting, $MouseX, $MouseY, $UseMouseX, $UseMouseY, $Edit1 Global $aArray[1] = [] $cmdtmp = StringReplace($cmdlineraw, Chr(34), "") If StringLen($cmdtmp) = 2 Then     If StringRight($cmdtmp, 1) = ":" Then         $cmd = $cmdtmp & "\"     EndIf Else     If StringRight($cmdtmp, 1) <> "\" Or StringRight($cmdtmp, 1) <> "/" Then         $cmd = $cmdtmp & "\"     EndIf EndIf If Not FileExists($cmd) Then                    ;Check if the folder exists, display an error message if not !     DisplayReadMe(1)     Exit EndIf If StringLen(@ScriptDir) > 3 And StringRight(@ScriptDir, 1) <> "\" Then     $tmpinidir = @ScriptDir & "\" Else     $tmpinidir = @ScriptDir EndIf Local Const $sFilePath = $tmpinidir & "NewFile.ini" $filesetting = IniRead($sFilePath, "setting", "filename", "MyNewFile") $filesetting = StringReplace($filesetting, ">", " ") ;msgbox (0,"",$filesetting)  ;Debugging If FileExists($sFilePath) Then     $aArray = IniReadSectionNames($sFilePath) ; Read the INI section names. This will return a 1 dimensional array. EndIf $UseMouseX = IniRead($sFilePath, "setting", "UseMouseX", "1") $UseMouseY = IniRead($sFilePath, "setting", "UseMouseY", "0") ; Check if an error occurred. If Not @error Then     ; Enumerate through the array displaying the section names.     Local $count = 0     If FileExists($sFilePath) Then         For $i = 1 To $aArray[0]             $tmp1 = IniRead($sFilePath, $aArray[$i], "1", "none")             If $tmp1 <> "none" And StringLeft($tmp1, 1) = "." Then            ;Extension need to have a dot, or it will be ignored !                 $tmptxt = $tmptxt & $tmp1 & "|" & $aArray[$i] & @CRLF                 $count = $count + 1                                            ;Count how many extensions are added !             EndIf         Next     EndIf     If $count = 0 Then $tmptxt = ".au3|AutoIt 3" & @CRLF & ".txt|Text File" & @CRLF     ;MsgBox($MB_SYSTEMMODAL,"",$tmptxt)     _ArrayAdd($test, $tmptxt, 0, "|", @CRLF) Else                                                            ;Reading the ini failed, create a default array for the extensions     $tmptxt = ".au3|AutoIt 3" & @CRLF & ".txt|Text" & @CRLF     _ArrayAdd($test, $tmptxt, 0, "|", @CRLF) EndIf ;Local $test[5][2] = [['.au3', 'AutoIt'], ['.ahk', 'Auto Hotkey'], ['.txt', 'text'], ['.sdlbas', 'Sdl Basic'], ['.html', 'Webpage']] If $UseMouseX = 1 Then     $MouseX = MouseGetPos(0) Else     $MouseX = -1 EndIf If $UseMouseY = 1 Then     $MouseY = MouseGetPos(1) Else     $MouseY = -1 EndIf $Form1 = GUICreate("Create New File", 210, 247, $MouseX, $MouseY, $WS_CAPTION, $WS_EX_TOOLWINDOW) $List = GUICtrlCreateListView("", 5, 5, 200, 200) _GUICtrlListView_InsertColumn($List, 0, "Extension", 65) _GUICtrlListView_InsertColumn($List, 1, "Description", 115) _GUICtrlListView_AddArray($List, $test) GUICtrlCreateLabel("Example:" & $filesetting & "0000.ext", 5, 205) $Button1 = GUICtrlCreateButton("Ok", 16, 224, 45, 22) $Button3 = GUICtrlCreateButton("ReadMe", 80, 224, 55, 22) $Button2 = GUICtrlCreateButton("Cancel", 150, 224, 45, 22) $cDummy = GUICtrlCreateDummy() GUISetState(@SW_SHOW) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") While 1     $nMsg = GUIGetMsg()     Switch $nMsg         Case $GUI_EVENT_CLOSE, $Button2             Exit         Case $Button3             DisplayReadMe(0)         Case $Button1, $cDummy             Local $tmptxt = StringSplit(_GUICtrlListView_GetItemTextString($List), "|")[1]             If StringLen($tmptxt) > 0 Then                 Local $fnr = 0, $tmpfile = ""                 While $fnr < 10000                     $tmpfile = $cmd & $filesetting & _StringRepeat("0", 4 - StringLen($fnr)) & $fnr & $tmptxt                     ;MsgBox(0,"",$tmpfile) ; for debugging                     If Not (FileExists($tmpfile)) Then                         $hFile = _WinAPI_CreateFile($tmpfile, 0)                         _WinAPI_CloseHandle($hFile)                         Exit                     EndIf                     $fnr = $fnr + 1                 WEnd             EndIf     EndSwitch WEnd ;================================================================================ Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)     Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView     $hWndListView = $List     If Not IsHWnd($List) Then $hWndListView = GUICtrlGetHandle($List)     $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)     $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))     $iCode = DllStructGetData($tNMHDR, "Code")     Switch $hWndFrom         Case $hWndListView             Switch $iCode                 Case $NM_DBLCLK                     ; Fire the dummy if the ListView is double clicked                     GUICtrlSendToDummy($cDummy)             EndSwitch     EndSwitch     Return $GUI_RUNDEFMSG EndFunc   ;==>WM_NOTIFY Func DisplayReadMe($err)     Local $Form1 = GUICreate("Read Me", 550, 400, 10, 10, BitOR($WS_CAPTION, $WS_THICKFRAME ,$WS_MAXIMIZEBOX))     $Edit1 = GUICtrlCreateEdit("", 0, 0, 549, 399)     GUICtrlSetData(-1, "")     GUISetState(@SW_SHOW)     If $err=1 then         local $txttmp01="Error: Path does not exist"         local $txttmp02="Commandline call was: "         AddText ($txttmp01)         Addtext ($txttmp02 & $cmd & @CRLF & @CRLF)     EndIf     AddText("Instructions:" & @CRLF)     AddText("Displays a selection of available extensions and then creates a new file at the Path's location." & @CRLF & @CRLF & "Usage: NewFile Path")     AddText("Example: NewFile c:\myfolder\" & @CRLF)     AddText("Result: A file with a name 'MyFile0000.ext' will be created at the Path's location.")     AddText("If the filename exists, the number counter will increase, until it finds a free number, up to 9999." & @CRLF)     AddText("Uses a configuration file in the .exe folder named NewFile.ini !" & @CRLF)     AddText("Example of a config file:" & @CRLF)     AddText("[setting]" & @CRLF & "filename=MyFile>")     AddText("UseMouseX=0                ;0 or 1 - position the dialog at the mouse x coordinate - usefull for multi monitor settings !")     AddText("UseMouseY=0                ;0 or 1 - Set this and UseMouseX to spawn the dialog at the mouse coordinates !" & @CRLF)     AddText(";Use > in filename as a space char ! (only needed if you want the space char at the beginning or at the end : in between filename and the number)" & @CRLF)     AddText(";Format for this ini file is:" & @CRLF & ";Name              e.g [Auto It]")     AddText(";extension       e.g 1=.au3" & @CRLF & "; p.s. only 1 extension per section ! the number must be 1" & @CRLF)     AddText("[AutoIt3]" & @CRLF & "1=.au3" & @CRLF & @CRLF & "[Text]" & @CRLF & "1=.txt")     _GUICtrlEdit_SetSel($Edit1, 0, 0)     _GUICtrlEdit_Scroll($Edit1, $SB_SCROLLCARET)     If $err=1 Then         _GUICtrlEdit_SetSel($Edit1, 0, StringLen($txttmp01 & $txttmp02 & $cmd)+5)     EndIf     While 1         $nMsg = GUIGetMsg()         Switch $nMsg             Case $GUI_EVENT_CLOSE                 GUIDelete($Form1)                 ExitLoop         EndSwitch     WEnd EndFunc   ;==>DisplayReadMe Func AddText($edittxt)     _GUICtrlEdit_AppendText($Edit1, $edittxt & @CRLF) EndFunc   ;==>AddText  
       NewFile.ini
      [setting] filename=MyNewFile_ UseMouseX=0                ;0 or 1 - position the dialog at the mouse x coordinate - usefull for multi monitor settings ! UseMouseY=0                ;0 or 1 - Set this and UseMouseX to spawn the dialog at the mouse coordinates ! ;Use > in filename as a space char ! (only needed if you want the space char at the beginning or at the end : in between filename and the number) ;Format for this ini file is: ;Name              e.g [Auto It] ;extension       e.g 1=.au3 ; p.s. only 1 extension per section ! the number must be 1 [AutoIt3] 1=.au3 [Auto Hotkey] 1=.ahk [Text] 1=.txt [Sdl Basic] 1=.sdlbas [Webpage] 1=.html [Basic] 1=.bas [Pascal] 1=.pas [Rich Text (RTF)] 1=.rtf [Word Document] 1=.doc [Hex File] 1=.hex
    • By Miliardsto
      I have the following code. You can see there are $color_normal and $color_trans
      In my case normal is too dark . And color trans is to much violet.
      If you run it you will see how its looks. I want gui with listView have the same color like taskbar in windows 10.
      How to achieve that?
       
       
      #include <Date.au3> #include <MsgBoxConstants.au3> #include <GuiListBox.au3> #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> HotKeySet("{ESC}", "Terminate") $color_normal = "0x" & StringLeft(StringRight(RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Accent", "AccentPalette"), 24), 6) $color_trans = "0x" & StringLeft(StringRight(RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Accent", "AccentPalette"), 16), 6) $trans = RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize", "EnableTransparency") ConsoleWrite("Transpart = " & $trans & @CRLF) ConsoleWrite("Color normal = " & $color_normal & @CRLF) ConsoleWrite("Color trans = " & $color_trans & @CRLF) ConsoleWrite(_Get_taskbar_color()); It return AARRGGBB $taskbarColor = _Get_taskbar_color() Global $gui = GUICreate("Test", 150, 58,@DesktopWidth-300,@DesktopHeight-58,$WS_POPUP,BitOR($WS_EX_TOPMOST, $WS_EX_TOOLWINDOW)) Global $idListview = GUICtrlCreateListView("", 0, 0, 150, 58,BitOR($LBS_NOTIFY,$LBS_SORT), 0) ;_GuiCtrlMakeTrans(-1,100) ; Add column _GUICtrlListView_AddColumn($idListview, "Msgs", 100) GUICtrlSetFont(-1, 7, 400, 0, "Segoe UI") GUICtrlSetColor(-1, 0x470C4F) GUICtrlSetBkColor($idListview, 0x310638) GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd Func Terminate() Exit EndFunc Func _Get_taskbar_color() If RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize", "ColorPrevalence") Then If RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize", "EnableTransparency") Then Return "0xD9" & StringLeft(StringRight(RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Accent", "AccentPalette"), 16), 6) Else Return "0xFF" & StringLeft(StringRight(RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Accent", "AccentPalette"), 24), 6) EndIf Else If RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize", "EnableTransparency") Then Return "0xD9000000" Else Return "0xFF000000" EndIf EndIf EndFunc  
×
×
  • Create New...