Jump to content

Trying to Create a Path Gradient [Solved and improved - Double Buffering/Redraw GDIPlus]

Malkey
 Share

Recommended Posts

Malkey Universalist

Malkey

Posted
Posted (edited)

From the example, you can see the center color is set and blends with the surround colors which are white, zero.

This is the problem I need help with. The problem being, the surround colors should not all be white. They should be the different colors that are in the array of colors, $aColors[].

My thoughts on the problem is, the array of the surround colors is in the wrong format. So the "GdipSetPathGradientSurroundColorsWithCount" wrapper will not accept the surround colors, This function/wrapper accepts the number of colors but not the color values.

This line of thinking may also be my problem.

Guessing has not helped.

I have not been able to find the format output of the "Color colors[] = {Color(255, 0, 0, 0), .... " statement in the example at

http://msdn.microsoft.com/en-us/library/ms533917(VS.85).aspx

What I thought was the output didn't work.

Any help or direction would be much appreciated. 

#include <GDIPlus.au3>
#include <WinAPI.au3>
#include <GuiConstants.au3>
;#include <WindowsConstants.au3>

; The following example creates a GraphicsPath object path, adds an arc to path, closes the arc, and then draws path.
; Creating a Path Gradient   @   http://msdn.microsoft.com/en-us/library/ms533917(VS.85).aspx
Global $aPoints[11][2] = [[10, 0],[75, 0],[100, 50],[150, 50],[112, 75],[150, 150],[75, 100],[0, 150],[37, 75],[0, 50],[50, 50]]

;Opt("GUIOnEventMode", 1)
;GUISetOnEvent(-3, "close")

Global Const $iOpacity = 255
Local $hPath
Global $GuiSizeX = 400, $GuiSizeY = 400

$hGui = GUICreate("Paths", $GuiSizeX, $GuiSizeY)
GUISetState()

_GDIPlus_Startup()

$hGraphic = _GDIPlus_GraphicsCreateFromHWND($hGui)
ConsoleWrite("$hGraphic  " & Hex($hGraphic) & @CRLF)

;======== CreatePath =====
; $aResult = DllCall($ghGDIPDll, "int", "GdipCreatePath", "int", $FillModeAlternate, "ptr", $pPath)
; $FillModeAlternate = 0
; $FillModeWinding   = 1
$hPath = DllCall($ghGDIPDll, "int", "GdipCreatePath", "int", 0, "int*", 0)
Local $res = "GdipCreatePath  " & Hex($hPath[2]) & @CRLF
For $x = 0 To 2
    $res &= $x & "  " & $hPath[$x] & @CRLF
Next
ConsoleWrite($res & @CRLF)
;======> End of CreatePath ===

#cs
;======= AddPathArc =========
    ;$aResult = DllCall($ghGDIPDll, "int", "GdipAddPathArc", "int", $iX, "int", $iY, "int", $iWidth, "int", $iHeight, "int", $iStartAng, "int", $iSweepAng)
    $aResult = DllCall($ghGDIPDll, "int", "GdipAddPathArc", "hwnd", $hPath[2], "int", _WinAPI_FloatToInt(150), _
    "int",  _WinAPI_FloatToInt(150), "int",  _WinAPI_FloatToInt(100), "int",  _WinAPI_FloatToInt(100), _
    "int",  _WinAPI_FloatToInt(10), "int",  _WinAPI_FloatToInt(180))
    $res = "GdipAddPathArc " & @CRLF
    for $x = 0 to 7
    $res &= $x & "  " & $aResult[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
;=======> End of AddPathArc =========
#ce

_GDIPlus_AddPathLine2($hPath, $aPoints)

;GdipCreatePathGradientFromPath(GDIPCONST GpPath* path, GpPathGradient **polyGradient)
$hBrushGrad = DllCall($ghGDIPDll, "int", "GdipCreatePathGradientFromPath", "hwnd", $hPath[2], "int*", 0)

;$hBrushGrad = _GDIPlus_BrushCreateSolid(0xFFFF0000)

GDIPlus_SetPathGradientCenterColor($hBrushGrad[2], 0xFFFF0000)

;==== Trying to set Array of colors for SetPathGradientSurroundColorsWithCount
;Global $aColors[10] = ["0xFF00FFFF", "0xFF00FF00", "0xFF0000FF", "0xFFFFFFFF", "0xFF000000", "0xFF00FF00", "0xFF0000FF", "0xFFFFFFFF", "0xFF000000", "0xFF00FF00"]
;Global $aColors[10] = ["FF00FFFF", "FF00FF00", "FF0000FF", "FFFFFFFF", "FF000000", "FF00FF00", "FF0000FF", "FFFFFFFF", "FF000000", "FF00FF00"]
Global $aColors[10] = ['FF00FFFF', 'FF00FF00', 'FF0000FF', 'FFFFFFFF', 'FF000000', 'FF00FF00', 'FF0000FF', 'FFFFFFFF', 'FF000000', 'FF00FF00']
;Global $aColors[10] = [0xFF00FFFF, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00]
;Global $aColors[10] = [_WinAPI_IntToFloat(Dec("FF00FFFF")), _WinAPI_IntToFloat(Dec("FF00FF00")), _WinAPI_IntToFloat(Dec("FF0000FF")), _WinAPI_IntToFloat(Dec("FFFFFFFF")), _WinAPI_IntToFloat(Dec("FF000000")), _WinAPI_IntToFloat(Dec("FF00FF00")), _WinAPI_IntToFloat(Dec("FF0000FF")), _WinAPI_IntToFloat(Dec("FFFFFFFF")), _WinAPI_IntToFloat(Dec("FF000000")), _WinAPI_IntToFloat(Dec("FF00FF00"))]
;Global $aColors[10] = [_WinAPI_FloatToInt(dec("FF00FFFF")), _WinAPI_FloatToInt(dec("FF00FF00")), _WinAPI_FloatToInt(dec("FF0000FF")), _WinAPI_FloatToInt(dec("FFFFFFFF")), _WinAPI_FloatToInt(dec("FF000000")), _WinAPI_FloatToInt(dec("FF00FF00")), _WinAPI_FloatToInt(dec("FF0000FF")), _WinAPI_FloatToInt(dec("FFFFFFFF")), _WinAPI_FloatToInt(dec("FF000000")), _WinAPI_FloatToInt(dec("FF00FF00"))]
;Global $aColors[10] = [dec("FF00FFFF"), dec("FF00FF00"), dec("FF0000FF"), dec("FFFFFFFF"), dec("FF000000"), dec("FF00FF00"), dec("FF0000FF"), dec("FFFFFFFF"), dec("FF000000"), dec("FF00FF00")]
;Global $aColors[1] =  [_WinAPI_FloatToInt(0xFFFF00FF)] ; [(Dec (Hex(0, 2) & Hex(255, 2) & Hex(0, 2)))] ;[Dec (0xFF & Hex(0, 2) & Hex(255, 2) & Hex(0, 2))]
;Global $aColors[10] = [0xFF00FFFF, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00]

$status = GDIPlus_SetPathGradientSurroundColorsWithCount($hBrushGrad[2], $aColors)
;====> End of Trying to set Array of colors for SetPathGradientSurroundColorsWithCount

$aArr = GDIPlus_GetPathGradientSurroundColorsWithCount($hBrushGrad[2])

$aResult1 = DllCall($ghGDIPDll, "int", "GdipClosePathFigure", "hwnd", $hPath[2])

$hPen = _GDIPlus_PenCreate(0xFF000000, 4)
ConsoleWrite("$hPen  " & Hex($hPen) & @CRLF)

_GDIPlus_GraphicsClear($hGraphic, 0xFFFFFFFF)
;_GDIPlus_GraphicsDrawLine ($hGraphic, 10, 150, 390, 150, $hPen)

;========= DrawPath =========
$aResult2 = DllCall($ghGDIPDll, "int", "GdipDrawPath", "hwnd", $hGraphic, "hwnd", $hPen, "hwnd", $hPath[2])
$res = "GdipDrawPath" & @CRLF
For $x = 0 To 3
    $res &= $x & "  " & $aResult2[$x] & @CRLF
Next
ConsoleWrite($res & @CRLF)
;=========> End of DrawPath =========

;======= Fill Path - Color path object ==
;GdipFillPath(GpGraphics *graphics, GpBrush *brush, GpPath *path)
DllCall($ghGDIPDll, "int", "GdipFillPath", "hwnd", $hGraphic, "hwnd", $hBrushGrad[2], "hwnd", $hPath[2])
;=======> End of Fill Path ==============


_GDIPlus_BrushDispose($hBrushGrad)
_GDIPlus_PenDispose($hPen)
DllCall($ghGDIPDll, "int", "GdipDeletePath", "hwnd", $hPath)
_GDIPlus_GraphicsDispose($hGraphic)
_GDIPlus_Shutdown()

Do
    
    Sleep(25)
Until GUIGetMsg() = $GUI_EVENT_CLOSE


Func close()
    Exit
EndFunc   ;==>close

;GdipAddPathPolygon(GpPath *path, GDIPCONST GpPointF *points, INT count)
Func _GDIPlus_AddPathPolygon($hPath, $aPoints)
    Local $iI, $iCount, $pPoints, $tPoints, $aResult, $tmpError, $tmpExError

    $iCount = $aPoints[0][0]
    $tPoints = DllStructCreate("int[" & $iCount * 2 & "]")
    $pPoints = DllStructGetPtr($tPoints)
    For $iI = 1 To $iCount
        DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][0]), (($iI - 1) * 2) + 1)
        DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][1]), (($iI - 1) * 2) + 2)
    Next

    $aResult = DllCall($ghGDIPDll, "int", "GdipAddPathPolygon", "hwnd", $hPath[2], "ptr", _
            $pPoints, "int", $iCount)
    $tmpError = @error
    $tmpExError = @extended
    _GDIPlus_BrushDefDispose()
    If $tmpError Then Return SetError($tmpError, $tmpExError, False)
    Return SetError($aResult[0], 0, $aResult[0] = 0)
EndFunc   ;==>_GDIPlus_AddPathPolygon

;GpStatus WINGDIPAPI GdipAddPathLine2(GpPath *path, GDIPCONST GpPointF *points, INT count)
Func _GDIPlus_AddPathLine2($hPath, $aPoints)
    Local $iI, $iCount, $pPoints, $tPoints, $aResult, $tmpError, $tmpExError

    $iCount = $aPoints[0][0]
    $tPoints = DllStructCreate("int[" & $iCount * 2 & "]")
    $pPoints = DllStructGetPtr($tPoints)
    For $iI = 1 To $iCount
        DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][0]), (($iI - 1) * 2) + 1)
        DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][1]), (($iI - 1) * 2) + 2)
    Next

    $aResult = DllCall($ghGDIPDll, "int", "GdipAddPathLine2", "hwnd", $hPath[2], "ptr", _
            $pPoints, "int", $iCount)
    $tmpError = @error
    $tmpExError = @extended
    _GDIPlus_BrushDefDispose()
    If $tmpError Then Return SetError($tmpError, $tmpExError, False)
    Return SetError($aResult[0], 0, $aResult[0] = 0)
EndFunc   ;==>_GDIPlus_AddPathLine2

;================> GDIPlus_SetPathGradientCenterColor ===============
; Description    Sets the center color of this path gradient brush. The center color is the
;               color that appears at the brush's center point.
;Parameters
;brush    [in] Pointer to the PathGradientBrush object.
;colors    [in] An ARGB color that specifies the center color.
;Remarks    By default the center point is the centroid of the brush's boundary path,
;           but you can set the center point to any location inside or outside the path.
;
Func GDIPlus_SetPathGradientCenterColor($hBrush, $iARGB)
    Local $aResult
    $aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientCenterColor", "hwnd", $hBrush, "int", $iARGB)
    If @error Then Return SetError(@error, @extended, False)
    Return $aResult ;SetError($aResult[0], 0, $aResult[0] = 0)
EndFunc   ;==>GDIPlus_SetPathGradientCenterColor
;=================================================

;==============> GDIPlus_SetPathGradientSurroundColorsWithCount ===================================
;Description    Sets the surround colors of this path gradient brush. The surround colors are colors
;               specified for discrete points on the brush's boundary path.
;Parameters
;brush    [in] Pointer to the PathGradientBrush object.
;colors    [in] Pointer to an array of ARGB colors that specify the surround colors.
;count    [in, out] Pointer to a long integer that, on input, specifies the number of Color objects
;           in the colors array. If the method succeeds, this parameter, on output, receives the number
;           of surround colors set. If the method fails, this parameter does not receive a value.
;Remarks    A path gradient brush has a boundary path and a center point. The center point is set
;           to a single color, but you can specify different colors for several points on the boundary.
;           For example, suppose you specify red for the center color, and you specify blue, green,
;           and yellow for distinct points on the boundary. Then as you move along the boundary,
;           the color will change gradually from blue to green to yellow and back to blue.
;           As you move along a straight line from any point on the boundary to the center point,
;           the color will change from that boundary point's color to red.
;
Func GDIPlus_SetPathGradientSurroundColorsWithCount($hBrush, $aArgb)
    Local $iI, $iCount, $aResult, $res, $x, $pArgb, $tArgb
    $iCount = UBound($aArgb) ;_WinAPI_FloatToInt(UBound($aArgb)) ;
    ;$tArgb = DllStructCreate("uint[" & $iCount  & "]")
    ;$pArgb = DllStructGetPtr($tArgb)
    ;For $iI = 0 To $iCount-1
    ;   DllStructSetData($tArgb, 1, $aArgb[$iI], $iI+1 )
    ;Next
    
    $aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "ptr", $pArgb, "int", $iCount)
    $res = "SetPathGradientSurroundColorsWithCount" & @CRLF
    For $x = 0 To 3
        $res &= $x & "  " & $aResult[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    If @error Then Return SetError(@error, @extended, 0)
    Return $aResult ;SetError($aResult[0], 0, $aResult[2])
EndFunc   ;==>GDIPlus_SetPathGradientSurroundColorsWithCount
;=================================================


; Gets the number of colors that have been specified for the boundary path of this path gradient brush.
Func GDIPlus_GetPathGradientSurroundColorCount($hBrush)
    Local $iCount, $res, $x
    ;GdipGetPointCount(GpPath* path, INT* count)
    $iCount = DllCall($ghGDIPDll, "int", "GdipGetPathGradientSurroundColorCount", "hwnd", $hBrush, "int*", 0)
    $res = "GdipGetPathGradientSurroundColorCount" & @CRLF
    For $x = 0 To 2
        $res &= $x & "  " & $iCount[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    Return $iCount[2]
EndFunc   ;==>GDIPlus_GetPathGradientSurroundColorCount


;GdipGetPathGradientSurroundColorsWithCount( GpPathGradient *brush, ARGB* color, INT* count)
Func GDIPlus_GetPathGradientSurroundColorsWithCount($hBrush)
    Local $iI, $iCount, $aArgb, $tArgb, $pArgb, $aResult, $res
    
    $iCount = GDIPlus_GetPathGradientSurroundColorCount($hBrush)
    Local $aArgb[$iCount]
    
    ;$tArgb = DllStructCreate("long[" & $iCount  & "]")
    ;$pArgb = DllStructGetPtr($tArgb)
    
    $aResult = DllCall($ghGDIPDll, "int", "GdipGetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "int", $aArgb, "int", $iCount)
    
    $res = "GdipGetPathGradientSurroundColorsWithCount" & @CRLF
    For $x = 0 To 3
        $res &= $x & "  " & $aResult[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    
    ;For $iI = 1 To $iCount
    ;   $aArgb[$iI -1] = DllStructGetData($tArgb, 1,  $iI )
    ;Next
    
    $res = "GdipGetPathGradientSurroundColorsWithCount Array Return" & @CRLF
    For $x = 0 To $iCount - 1
        $res &= $x & "  " & $aArgb[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    
    If @error Then Return SetError(@error, @extended, 0)
    Return $aResult ;SetError($aResult[0], 0, $aResult[2])
EndFunc   ;==>GDIPlus_GetPathGradientSurroundColorsWithCount

; Return number of points in Path
Func GDIPlus_GetPointCount($hPath)
    Local $iCount, $res, $x
    ;GdipGetPointCount(GpPath* path, INT* count)
    $iCount = DllCall($ghGDIPDll, "int", "GdipGetPointCount", "hwnd", $hPath, "int*", 0)
    $res = "GdipGetPointCount" & @CRLF
    For $x = 0 To 2
        $res &= $x & "  " & $iCount[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    Return $iCount[2]
EndFunc   ;==>GDIPlus_GetPointCount

;=================> GDIPlus_SetPathGradientCenterPoint ================================
;Description     Sets the center point of this path gradient brush. By default,
;               the center point is at the centroid of the brush's boundary path, but you
;               can set the center point to any location inside or outside the path.
;Parameters  brush    [in] Pointer to the PathGradientBrush object.
;           points    [out] Pointer to a PointF structure that receives the center point.
;Remarks    By default, the center point of a PathGradientBrush object is at the centroid of
;           the brush's boundary path, but you can set the center point to any location, inside
;           or outside the path, by calling the GdipSetPathGradientCenterPoint function.
Func GDIPlus_SetPathGradientCenterPoint($hBrush, $iX, $iY)
    Local $tPoint, $pPoint, $aResult
    $tPoint = DllStructCreate("int X;int Y")
    $pPoint = DllStructGetPtr($tPoint)
    DllStructSetData($tPoint, "X", _WinAPI_FloatToInt($iX))
    DllStructSetData($tPoint, "Y", _WinAPI_FloatToInt($iY))
    $aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientCenterPoint", "hwnd", $hBrush, "ptr", $pPoint)
    Return $aResult
    
EndFunc   ;==>GDIPlus_SetPathGradientCenterPoint
Edited by Malkey
Link to comment
Share on other sites
Malkey Universalist

Malkey

Posted
  • Author
Posted

Bump

I am still trying to get this to work.

Whenever the pointer, $pArgb, is put in this DllCall:-

$aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "ptr",$pArgb, "int", $iCount)

This error appears:- "autoit3.exe has encountered a problem and needs to close. We are sorry for the inconvenience."

If zero or "" or a variable equal to zero or "" replaces $pArgb as the pointer, no error occurrs and no surround colors appear.

Link to comment
Share on other sites
ProgAndy Universalist

ProgAndy

Posted
Posted (edited)

:) the fault is one small * :(

If you look at the definition, the count is an int*, nit an int.:

GpStatus WINGDIPAPI GdipSetPathGradientSurroundColorsWithCount( GpPathGradient *brush, GDIPCONST ARGB* color, INT* count)

so use th following line and uncomment the DLLStructcreate again !

$aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "ptr",$pArgb, "int*", $iCount)

the func:

CODE
Func GDIPlus_SetPathGradientSurroundColorsWithCount($hBrush, $aArgb)

Local $iI, $iCount, $aResult, $res, $x, $pArgb, $tArgb

$iCount = UBound($aArgb) ;_WinAPI_FloatToInt(UBound($aArgb)) ;

$tArgb = DllStructCreate("uint[" & $iCount & "]")

$pArgb = DllStructGetPtr($tArgb)

For $iI = 0 To $iCount-1

DllStructSetData($tArgb, 1, $aArgb[$iI], $iI+1 )

Next

$aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "ptr", $pArgb, "int*", $iCount)

$res = "SetPathGradientSurroundColorsWithCount" & @CRLF

For $x = 0 To 3

$res &= $x & " " & $aResult[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

If @error Then Return SetError(@error, @extended, 0)

Return $aResult ;SetError($aResult[0], 0, $aResult[2])

EndFunc ;==>GDIPlus_SetPathGradientSurroundColorsWithCount

When you wnat the image to be shoen permanently, you should add WM_APINT and double-buffer e.g.:

CODE
#include <GDIPlus.au3>

#include <WinAPI.au3>

#include <GuiConstants.au3>

;#include <WindowsConstants.au3>

; The following example creates a GraphicsPath object path, adds an arc to path, closes the arc, and then draws path.

; Creating a Path Gradient @ http://msdn.microsoft.com/en-us/library/ms533917(VS.85).aspx

Global $aPoints[11][2] = [[10, 0],[75, 0],[100, 50],[150, 50],[112, 75],[150, 150],[75, 100],[0, 150],[37, 75],[0, 50],[50, 50]]

;Opt("GUIOnEventMode", 1)

;GUISetOnEvent(-3, "close")

Global Const $iOpacity = 255

Local $hPath

Global $GuiSizeX = 400, $GuiSizeY = 400

$hGui = GUICreate("Paths", $GuiSizeX, $GuiSizeY)

GUISetState()

_GDIPlus_Startup()

$hGraphicGUI = _GDIPlus_GraphicsCreateFromHWND($hGui)

; Create Double Buffer, so the doesn't need to be repainted on PAINT-Event

; Just copy the Mem-Imnage to the GUI muttley

$hBMPBuff = _GDIPlus_BitmapCreateFromGraphics(400,400,$hGraphicGUI)

$hGraphic = _GDIPlus_ImageGetGraphicsContext($hBMPBuff)

;End Double Buffer

ConsoleWrite("$hGraphic " & Hex($hGraphic) & @CRLF)

;======== CreatePath =====

; $aResult = DllCall($ghGDIPDll, "int", "GdipCreatePath", "int", $FillModeAlternate, "ptr", $pPath)

; $FillModeAlternate = 0

; $FillModeWinding = 1

$hPath = DllCall($ghGDIPDll, "int", "GdipCreatePath", "int", 0, "int*", 0)

Local $res = "GdipCreatePath " & Hex($hPath[2]) & @CRLF

For $x = 0 To 2

$res &= $x & " " & $hPath[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

;======> End of CreatePath ===

#cs

;======= AddPathArc =========

;$aResult = DllCall($ghGDIPDll, "int", "GdipAddPathArc", "int", $iX, "int", $iY, "int", $iWidth, "int", $iHeight, "int", $iStartAng, "int", $iSweepAng)

$aResult = DllCall($ghGDIPDll, "int", "GdipAddPathArc", "hwnd", $hPath[2], "int", _WinAPI_FloatToInt(150), _

"int", _WinAPI_FloatToInt(150), "int", _WinAPI_FloatToInt(100), "int", _WinAPI_FloatToInt(100), _

"int", _WinAPI_FloatToInt(10), "int", _WinAPI_FloatToInt(180))

$res = "GdipAddPathArc " & @CRLF

for $x = 0 to 7

$res &= $x & " " & $aResult[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

;=======> End of AddPathArc =========

#ce

_GDIPlus_AddPathLine2($hPath, $aPoints)

ConsoleWrite("jjj" & @CRLF)

;GdipCreatePathGradientFromPath(GDIPCONST GpPath* path, GpPathGradient **polyGradient)

$hBrushGrad = DllCall($ghGDIPDll, "int", "GdipCreatePathGradientFromPath", "hwnd", $hPath[2], "int*", 0)

ConsoleWrite($hBrushGrad[2] & @CRLF)

;$hBrushGrad = _GDIPlus_BrushCreateSolid(0xFFFF0000)

GDIPlus_SetPathGradientCenterColor($hBrushGrad[2], 0xFFFF0000)

;==== Trying to set Array of colors for SetPathGradientSurroundColorsWithCount

;Global $aColors[10] = ["0xFF00FFFF", "0xFF00FF00", "0xFF0000FF", "0xFFFFFFFF", "0xFF000000", "0xFF00FF00", "0xFF0000FF", "0xFFFFFFFF", "0xFF000000", "0xFF00FF00"]

;Global $aColors[10] = ["FF00FFFF", "FF00FF00", "FF0000FF", "FFFFFFFF", "FF000000", "FF00FF00", "FF0000FF", "FFFFFFFF", "FF000000", "FF00FF00"]

Global $aColors[10] = ['FF00FFFF', 'FF00FF00', 'FF0000FF', 'FFFFFFFF', 'FF000000', 'FF00FF00', 'FF0000FF', 'FFFFFFFF', 'FF000000', 'FF00FF00']

;Global $aColors[10] = [0xFF00FFFF, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00]

;Global $aColors[10] = [_WinAPI_IntToFloat(Dec("FF00FFFF")), _WinAPI_IntToFloat(Dec("FF00FF00")), _WinAPI_IntToFloat(Dec("FF0000FF")), _WinAPI_IntToFloat(Dec("FFFFFFFF")), _WinAPI_IntToFloat(Dec("FF000000")), _WinAPI_IntToFloat(Dec("FF00FF00")), _WinAPI_IntToFloat(Dec("FF0000FF")), _WinAPI_IntToFloat(Dec("FFFFFFFF")), _WinAPI_IntToFloat(Dec("FF000000")), _WinAPI_IntToFloat(Dec("FF00FF00"))]

;Global $aColors[10] = [_WinAPI_FloatToInt(dec("FF00FFFF")), _WinAPI_FloatToInt(dec("FF00FF00")), _WinAPI_FloatToInt(dec("FF0000FF")), _WinAPI_FloatToInt(dec("FFFFFFFF")), _WinAPI_FloatToInt(dec("FF000000")), _WinAPI_FloatToInt(dec("FF00FF00")), _WinAPI_FloatToInt(dec("FF0000FF")), _WinAPI_FloatToInt(dec("FFFFFFFF")), _WinAPI_FloatToInt(dec("FF000000")), _WinAPI_FloatToInt(dec("FF00FF00"))]

;Global $aColors[10] = [dec("FF00FFFF"), dec("FF00FF00"), dec("FF0000FF"), dec("FFFFFFFF"), dec("FF000000"), dec("FF00FF00"), dec("FF0000FF"), dec("FFFFFFFF"), dec("FF000000"), dec("FF00FF00")]

;Global $aColors[1] = [_WinAPI_FloatToInt(0xFFFF00FF)] ; [(Dec (Hex(0, 2) & Hex(255, 2) & Hex(0, 2)))] ;[Dec (0xFF & Hex(0, 2) & Hex(255, 2) & Hex(0, 2))]

;Global $aColors[10] = [0xFF00FFFF, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00]

ConsoleWrite("kl" & @CRLF)

$status = GDIPlus_SetPathGradientSurroundColorsWithCount($hBrushGrad[2], $aColors)

;====> End of Trying to set Array of colors for SetPathGradientSurroundColorsWithCount

ConsoleWrite("ölö" & @CRLF)

$aArr = GDIPlus_GetPathGradientSurroundColorsWithCount($hBrushGrad[2])

$aResult1 = DllCall($ghGDIPDll, "int", "GdipClosePathFigure", "hwnd", $hPath[2])

$hPen = _GDIPlus_PenCreate(0xFF000000, 4)

ConsoleWrite("$hPen " & Hex($hPen) & @CRLF)

_GDIPlus_GraphicsClear($hGraphic, 0xFFFFFFFF)

;_GDIPlus_GraphicsDrawLine ($hGraphic, 10, 150, 390, 150, $hPen)

;========= DrawPath =========

$aResult2 = DllCall($ghGDIPDll, "int", "GdipDrawPath", "hwnd", $hGraphic, "hwnd", $hPen, "hwnd", $hPath[2])

$res = "GdipDrawPath" & @CRLF

For $x = 0 To 3

$res &= $x & " " & $aResult2[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

;=========> End of DrawPath =========

;======= Fill Path - Color path object ==

;GdipFillPath(GpGraphics *graphics, GpBrush *brush, GpPath *path)

DllCall($ghGDIPDll, "int", "GdipFillPath", "hwnd", $hGraphic, "hwnd", $hBrushGrad[2], "hwnd", $hPath[2])

;=======> End of Fill Path ==============

_GDIPlus_BrushDispose($hBrushGrad)

_GDIPlus_PenDispose($hPen)

DllCall($ghGDIPDll, "int", "GdipDeletePath", "hwnd", $hPath)

GUIRegisterMsg(0xF,"MY_PAINT"); Register PAINT-Event

_WinAPI_RedrawWindow($hGui,0,0,2) ;PAINT the window

Do

Sleep(25)

Until GUIGetMsg() = $GUI_EVENT_CLOSE

;Func to redraw the BMP on PAINT MSG

Func MY_PAINT($hWnd, $Msg, $wParam, $lParam)

; Check, if the GUI with the Graphic should be repainted

If $hWnd = $hGui Then _GDIPlus_GraphicsDrawImage($hGraphicGUI,$hBMPBuff,0,0)

EndFunc

Func close()

Exit

EndFunc ;==>close

;Clean up resources on exit

Func OnAutoItExit()

_GDIPlus_GraphicsDispose($hGraphicGUI)

_GDIPlus_BitmapDispose($hBMPBuff)

_GDIPlus_GraphicsDispose($hGraphic)

_GDIPlus_Shutdown()

EndFunc

;GdipAddPathPolygon(GpPath *path, GDIPCONST GpPointF *points, INT count)

Func _GDIPlus_AddPathPolygon($hPath, $aPoints)

Local $iI, $iCount, $pPoints, $tPoints, $aResult, $tmpError, $tmpExError

$iCount = $aPoints[0][0]

$tPoints = DllStructCreate("int[" & $iCount * 2 & "]")

$pPoints = DllStructGetPtr($tPoints)

For $iI = 1 To $iCount

DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][0]), (($iI - 1) * 2) + 1)

DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][1]), (($iI - 1) * 2) + 2)

Next

$aResult = DllCall($ghGDIPDll, "int", "GdipAddPathPolygon", "hwnd", $hPath[2], "ptr", _

$pPoints, "int", $iCount)

$tmpError = @error

$tmpExError = @extended

_GDIPlus_BrushDefDispose()

If $tmpError Then Return SetError($tmpError, $tmpExError, False)

Return SetError($aResult[0], 0, $aResult[0] = 0)

EndFunc ;==>_GDIPlus_AddPathPolygon

;GpStatus WINGDIPAPI GdipAddPathLine2(GpPath *path, GDIPCONST GpPointF *points, INT count)

Func _GDIPlus_AddPathLine2($hPath, $aPoints)

Local $iI, $iCount, $pPoints, $tPoints, $aResult, $tmpError, $tmpExError

$iCount = $aPoints[0][0]

$tPoints = DllStructCreate("int[" & $iCount * 2 & "]")

$pPoints = DllStructGetPtr($tPoints)

For $iI = 1 To $iCount

DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][0]), (($iI - 1) * 2) + 1)

DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][1]), (($iI - 1) * 2) + 2)

Next

$aResult = DllCall($ghGDIPDll, "int", "GdipAddPathLine2", "hwnd", $hPath[2], "ptr", _

$pPoints, "int", $iCount)

$tmpError = @error

$tmpExError = @extended

_GDIPlus_BrushDefDispose()

If $tmpError Then Return SetError($tmpError, $tmpExError, False)

Return SetError($aResult[0], 0, $aResult[0] = 0)

EndFunc ;==>_GDIPlus_AddPathLine2

;================> GDIPlus_SetPathGradientCenterColor ===============

; Description Sets the center color of this path gradient brush. The center color is the

; color that appears at the brush's center point.

;Parameters

;brush [in] Pointer to the PathGradientBrush object.

;colors [in] An ARGB color that specifies the center color.

;Remarks By default the center point is the centroid of the brush's boundary path,

; but you can set the center point to any location inside or outside the path.

;

Func GDIPlus_SetPathGradientCenterColor($hBrush, $iARGB)

Local $aResult

$aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientCenterColor", "hwnd", $hBrush, "int", $iARGB)

If @error Then Return SetError(@error, @extended, False)

Return $aResult ;SetError($aResult[0], 0, $aResult[0] = 0)

EndFunc ;==>GDIPlus_SetPathGradientCenterColor

;=================================================

;==============> GDIPlus_SetPathGradientSurroundColorsWithCount ===================================

;Description Sets the surround colors of this path gradient brush. The surround colors are colors

; specified for discrete points on the brush's boundary path.

;Parameters

;brush [in] Pointer to the PathGradientBrush object.

;colors [in] Pointer to an array of ARGB colors that specify the surround colors.

;count [in, out] Pointer to a long integer that, on input, specifies the number of Color objects

; in the colors array. If the method succeeds, this parameter, on output, receives the number

; of surround colors set. If the method fails, this parameter does not receive a value.

;Remarks A path gradient brush has a boundary path and a center point. The center point is set

; to a single color, but you can specify different colors for several points on the boundary.

; For example, suppose you specify red for the center color, and you specify blue, green,

; and yellow for distinct points on the boundary. Then as you move along the boundary,

; the color will change gradually from blue to green to yellow and back to blue.

; As you move along a straight line from any point on the boundary to the center point,

; the color will change from that boundary point's color to red.

;

Func GDIPlus_SetPathGradientSurroundColorsWithCount($hBrush, $aArgb)

Local $iI, $iCount, $aResult, $res, $x, $pArgb, $tArgb

$iCount = UBound($aArgb) ;_WinAPI_FloatToInt(UBound($aArgb)) ;

$tArgb = DllStructCreate("uint[" & $iCount & "]")

$pArgb = DllStructGetPtr($tArgb)

For $iI = 0 To $iCount-1

DllStructSetData($tArgb, 1, $aArgb[$iI], $iI+1 )

Next

$aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "ptr", $pArgb, "int*", $iCount)

$res = "SetPathGradientSurroundColorsWithCount" & @CRLF

For $x = 0 To 3

$res &= $x & " " & $aResult[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

If @error Then Return SetError(@error, @extended, 0)

Return $aResult ;SetError($aResult[0], 0, $aResult[2])

EndFunc ;==>GDIPlus_SetPathGradientSurroundColorsWithCount

;=================================================

; Gets the number of colors that have been specified for the boundary path of this path gradient brush.

Func GDIPlus_GetPathGradientSurroundColorCount($hBrush)

Local $iCount, $res, $x

;GdipGetPointCount(GpPath* path, INT* count)

$iCount = DllCall($ghGDIPDll, "int", "GdipGetPathGradientSurroundColorCount", "hwnd", $hBrush, "int*", 0)

$res = "GdipGetPathGradientSurroundColorCount" & @CRLF

For $x = 0 To 2

$res &= $x & " " & $iCount[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

Return $iCount[2]

EndFunc ;==>GDIPlus_GetPathGradientSurroundColorCount

;GdipGetPathGradientSurroundColorsWithCount( GpPathGradient *brush, ARGB* color, INT* count)

Func GDIPlus_GetPathGradientSurroundColorsWithCount($hBrush)

Local $iI, $iCount, $aArgb, $tArgb, $pArgb, $aResult, $res

$iCount = GDIPlus_GetPathGradientSurroundColorCount($hBrush)

Local $aArgb[$iCount]

;$tArgb = DllStructCreate("long[" & $iCount & "]")

;$pArgb = DllStructGetPtr($tArgb)

$aResult = DllCall($ghGDIPDll, "int", "GdipGetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "int", $aArgb, "int", $iCount)

$res = "GdipGetPathGradientSurroundColorsWithCount" & @CRLF

For $x = 0 To 3

$res &= $x & " " & $aResult[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

;For $iI = 1 To $iCount

; $aArgb[$iI -1] = DllStructGetData($tArgb, 1, $iI )

;Next

$res = "GdipGetPathGradientSurroundColorsWithCount Array Return" & @CRLF

For $x = 0 To $iCount - 1

$res &= $x & " " & $aArgb[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

If @error Then Return SetError(@error, @extended, 0)

Return $aResult ;SetError($aResult[0], 0, $aResult[2])

EndFunc ;==>GDIPlus_GetPathGradientSurroundColorsWithCount

; Return number of points in Path

Func GDIPlus_GetPointCount($hPath)

Local $iCount, $res, $x

;GdipGetPointCount(GpPath* path, INT* count)

$iCount = DllCall($ghGDIPDll, "int", "GdipGetPointCount", "hwnd", $hPath, "int*", 0)

$res = "GdipGetPointCount" & @CRLF

For $x = 0 To 2

$res &= $x & " " & $iCount[$x] & @CRLF

Next

ConsoleWrite($res & @CRLF)

Return $iCount[2]

EndFunc ;==>GDIPlus_GetPointCount

;=================> GDIPlus_SetPathGradientCenterPoint ================================

;Description Sets the center point of this path gradient brush. By default,

; the center point is at the centroid of the brush's boundary path, but you

; can set the center point to any location inside or outside the path.

;Parameters brush [in] Pointer to the PathGradientBrush object.

; points [out] Pointer to a PointF structure that receives the center point.

;Remarks By default, the center point of a PathGradientBrush object is at the centroid of

; the brush's boundary path, but you can set the center point to any location, inside

; or outside the path, by calling the GdipSetPathGradientCenterPoint function.

Func GDIPlus_SetPathGradientCenterPoint($hBrush, $iX, $iY)

Local $tPoint, $pPoint, $aResult

$tPoint = DllStructCreate("int X;int Y")

$pPoint = DllStructGetPtr($tPoint)

DllStructSetData($tPoint, "X", _WinAPI_FloatToInt($iX))

DllStructSetData($tPoint, "Y", _WinAPI_FloatToInt($iY))

$aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientCenterPoint", "hwnd", $hBrush, "ptr", $pPoint)

Return $aResult

EndFunc ;==>GDIPlus_SetPathGradientCenterPoint

Edited by ProgAndy

*GERMAN* [note: you are not allowed to remove author / modified info from my UDFs]My UDFs:[_SetImageBinaryToCtrl] [_TaskDialog] [AutoItObject] [Animated GIF (GDI+)] [ClipPut for Image] [FreeImage] [GDI32 UDFs] [GDIPlus Progressbar] [Hotkey-Selector] [Multiline Inputbox] [MySQL without ODBC] [RichEdit UDFs] [SpeechAPI Example] [WinHTTP]UDFs included in AutoIt: FTP_Ex (as FTPEx), _WinAPI_SetLayeredWindowAttributes

Link to comment
Share on other sites
Malkey Universalist

Malkey

Posted
  • Author
Posted (edited)

Thank-you ProgAndy

Very much appreciated.

It works

#include <GDIPlus.au3>
#include <WinAPI.au3>
#include <GuiConstants.au3>
;#include <WindowsConstants.au3>

; The following example creates a GraphicsPath object path, adds an arc to path, closes the arc, and then draws path.
; Creating a Path Gradient   @   http://msdn.microsoft.com/en-us/library/ms533917(VS.85).aspx
Global $aPoints[11][2] = [[10, 0],[75, 0],[100, 50],[150, 50],[112, 75],[150, 150],[75, 100],[0, 150],[37, 75],[0, 50],[50, 50]]

;Opt("GUIOnEventMode", 1)
;GUISetOnEvent(-3, "close")

Global Const $iOpacity = 255
Local $hPath
Global $GuiSizeX = 400, $GuiSizeY = 400

$hGui = GUICreate("Paths", $GuiSizeX, $GuiSizeY)
GUISetState()

_GDIPlus_Startup()

; Create Double Buffer, so the doesn't need to be repainted on PAINT-Event
$hGraphicGUI = _GDIPlus_GraphicsCreateFromHWND($hGui)
$hBMPBuff = _GDIPlus_BitmapCreateFromGraphics(400, 400, $hGraphicGUI)
$hGraphic = _GDIPlus_ImageGetGraphicsContext($hBMPBuff)
;End Double Buffer add-in 1 of 3


;======== CreatePath =====
; $aResult = DllCall($ghGDIPDll, "int", "GdipCreatePath", "int", $FillModeAlternate, "ptr", $pPath)
; $FillModeAlternate = 0
; $FillModeWinding   = 1
$hPath = DllCall($ghGDIPDll, "int", "GdipCreatePath", "int", 0, "int*", 0)
;======> End of CreatePath ===

#cs
    ;======= AddPathArc =========
    ;$aResult = DllCall($ghGDIPDll, "int", "GdipAddPathArc", "int", $iX, "int", $iY, "int", $iWidth, "int", $iHeight, "int", $iStartAng, "int", $iSweepAng)
    $aResult = DllCall($ghGDIPDll, "int", "GdipAddPathArc", "hwnd", $hPath[2], "int", _WinAPI_FloatToInt(150), _
    "int",  _WinAPI_FloatToInt(150), "int",  _WinAPI_FloatToInt(100), "int",  _WinAPI_FloatToInt(100), _
    "int",  _WinAPI_FloatToInt(10), "int",  _WinAPI_FloatToInt(180))
    $res = "GdipAddPathArc " & @CRLF
    for $x = 0 to 7
    $res &= $x & "  " & $aResult[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    ;=======> End of AddPathArc =========
#ce

_GDIPlus_AddPathLine2($hPath, $aPoints)

;GdipCreatePathGradientFromPath(GDIPCONST GpPath* path, GpPathGradient **polyGradient)
$hBrushGrad = DllCall($ghGDIPDll, "int", "GdipCreatePathGradientFromPath", "hwnd", $hPath[2], "int*", 0)

;$hBrushGrad = _GDIPlus_BrushCreateSolid(0xFFFF0000)

GDIPlus_SetPathGradientCenterColor($hBrushGrad[2], 0xFFFF0000)

Global $aColors[10] = [0xFF00FFFF, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00, 0xFF0000FF, 0xFFFFFFFF, 0xFF000000, 0xFF00FF00]
$status = GDIPlus_SetPathGradientSurroundColorsWithCount($hBrushGrad[2], $aColors)

$aArr = GDIPlus_GetPathGradientSurroundColorsWithCount($hBrushGrad[2])

$aResult1 = DllCall($ghGDIPDll, "int", "GdipClosePathFigure", "hwnd", $hPath[2])

$hPen = _GDIPlus_PenCreate(0xFF000000, 4)

_GDIPlus_GraphicsClear($hGraphic, 0xFFFFFFFF)
;_GDIPlus_GraphicsDrawLine ($hGraphic, 10, 150, 390, 150, $hPen)

;========= DrawPath =========
$aResult2 = DllCall($ghGDIPDll, "int", "GdipDrawPath", "hwnd", $hGraphic, "hwnd", $hPen, "hwnd", $hPath[2])
;=========> End of DrawPath =========

;======= Fill Path - Color path object ==
;GdipFillPath(GpGraphics *graphics, GpBrush *brush, GpPath *path)
DllCall($ghGDIPDll, "int", "GdipFillPath", "hwnd", $hGraphic, "hwnd", $hBrushGrad[2], "hwnd", $hPath[2])
;=======> End of Fill Path ==============


; Create Double Buffer, so the doesn't need to be repainted on PAINT-Event
GUIRegisterMsg(0xF, "MY_PAINT"); Register PAINT-Event 0x000F = $WM_PAINT (WindowsConstants.au3)
_WinAPI_RedrawWindow($hGui, 0, 0, 2) ;PAINT the window Flag $RDW_INTERNALPAINT = 0x0002
;End Double Buffer add-in 2 of 3

Do
    Sleep(25)
Until GUIGetMsg() = $GUI_EVENT_CLOSE

;Func to redraw the BMP on PAINT MSG
Func MY_PAINT($hWnd, $Msg, $wParam, $lParam)
    ; Check, if the GUI with the Graphic should be repainted
    If $hWnd = $hGui Then _GDIPlus_GraphicsDrawImage($hGraphicGUI, $hBMPBuff, 0, 0)
EndFunc   ;==>MY_PAINT & End Double Buffer add-in 3 of 3


Func close()
    _GDIPlus_BrushDispose($hBrushGrad)
    _GDIPlus_PenDispose($hPen)
    DllCall($ghGDIPDll, "int", "GdipDeletePath", "hwnd", $hPath)
    
    _GDIPlus_GraphicsDispose($hGraphicGUI)
    _GDIPlus_BitmapDispose($hBMPBuff)
    _GDIPlus_GraphicsDispose($hGraphic)
    _GDIPlus_Shutdown()
    
    Exit
EndFunc   ;==>close

;GdipAddPathPolygon(GpPath *path, GDIPCONST GpPointF *points, INT count)
Func _GDIPlus_AddPathPolygon($hPath, $aPoints)
    Local $iI, $iCount, $pPoints, $tPoints, $aResult, $tmpError, $tmpExError

    $iCount = $aPoints[0][0]
    $tPoints = DllStructCreate("int[" & $iCount * 2 & "]")
    $pPoints = DllStructGetPtr($tPoints)
    For $iI = 1 To $iCount
        DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][0]), (($iI - 1) * 2) + 1)
        DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][1]), (($iI - 1) * 2) + 2)
    Next

    $aResult = DllCall($ghGDIPDll, "int", "GdipAddPathPolygon", "hwnd", $hPath[2], "ptr", _
            $pPoints, "int", $iCount)
    $tmpError = @error
    $tmpExError = @extended
    _GDIPlus_BrushDefDispose()
    If $tmpError Then Return SetError($tmpError, $tmpExError, False)
    Return SetError($aResult[0], 0, $aResult[0] = 0)
EndFunc   ;==>_GDIPlus_AddPathPolygon

;GpStatus WINGDIPAPI GdipAddPathLine2(GpPath *path, GDIPCONST GpPointF *points, INT count)
Func _GDIPlus_AddPathLine2($hPath, $aPoints)
    Local $iI, $iCount, $pPoints, $tPoints, $aResult, $tmpError, $tmpExError

    $iCount = $aPoints[0][0]
    $tPoints = DllStructCreate("int[" & $iCount * 2 & "]")
    $pPoints = DllStructGetPtr($tPoints)
    For $iI = 1 To $iCount
        DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][0]), (($iI - 1) * 2) + 1)
        DllStructSetData($tPoints, 1, _WinAPI_FloatToInt($aPoints[$iI][1]), (($iI - 1) * 2) + 2)
    Next

    $aResult = DllCall($ghGDIPDll, "int", "GdipAddPathLine2", "hwnd", $hPath[2], "ptr", _
            $pPoints, "int", $iCount)
    $tmpError = @error
    $tmpExError = @extended
    _GDIPlus_BrushDefDispose()
    If $tmpError Then Return SetError($tmpError, $tmpExError, False)
    Return SetError($aResult[0], 0, $aResult[0] = 0)
EndFunc   ;==>_GDIPlus_AddPathLine2

;================> GDIPlus_SetPathGradientCenterColor ===============
; Description    Sets the center color of this path gradient brush. The center color is the
;            color that appears at the brush's center point.
;Parameters
;brush    [in] Pointer to the PathGradientBrush object.
;colors    [in] An ARGB color that specifies the center color.
;Remarks    By default the center point is the centroid of the brush's boundary path,
;       but you can set the center point to any location inside or outside the path.
;
Func GDIPlus_SetPathGradientCenterColor($hBrush, $iARGB)
    Local $aResult
    $aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientCenterColor", "hwnd", $hBrush, "int", $iARGB)
    If @error Then Return SetError(@error, @extended, False)
    Return $aResult ;SetError($aResult[0], 0, $aResult[0] = 0)
EndFunc   ;==>GDIPlus_SetPathGradientCenterColor
;=================================================

;==============> GDIPlus_SetPathGradientSurroundColorsWithCount ===================================
;Description    Sets the surround colors of this path gradient brush. The surround colors are colors
;            specified for discrete points on the brush's boundary path.
;Parameters
;brush    [in] Pointer to the PathGradientBrush object.
;colors    [in] Pointer to an array of ARGB colors that specify the surround colors.
;count    [in, out] Pointer to a long integer that, on input, specifies the number of Color objects
;         in the colors array. If the method succeeds, this parameter, on output, receives the number
;         of surround colors set. If the method fails, this parameter does not receive a value.
;Remarks    A path gradient brush has a boundary path and a center point. The center point is set
;         to a single color, but you can specify different colors for several points on the boundary.
;         For example, suppose you specify red for the center color, and you specify blue, green,
;         and yellow for distinct points on the boundary. Then as you move along the boundary,
;         the color will change gradually from blue to green to yellow and back to blue.
;         As you move along a straight line from any point on the boundary to the center point,
;         the color will change from that boundary point's color to red.
;
Func GDIPlus_SetPathGradientSurroundColorsWithCount($hBrush, $aArgb)
    Local $iI, $iCount, $aResult, $res, $x, $pArgb, $tArgb
    $iCount = UBound($aArgb)
    $tArgb = DllStructCreate("int[" & $iCount & "]")
    $pArgb = DllStructGetPtr($tArgb)
    For $iI = 0 To $iCount - 1
        DllStructSetData($tArgb, 1, $aArgb[$iI], $iI + 1)
    Next

    $aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "ptr", $pArgb, "int*", $iCount)
    $res = "SetPathGradientSurroundColorsWithCount" & @CRLF
    For $x = 0 To 3
        $res &= $x & "  " & $aResult[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    If @error Then Return SetError(@error, @extended, 0)
    Return $aResult ;SetError($aResult[0], 0, $aResult[2])
EndFunc   ;==>GDIPlus_SetPathGradientSurroundColorsWithCount
;=================================================


; Gets the number of colors that have been specified for the boundary path of this path gradient brush.
Func GDIPlus_GetPathGradientSurroundColorCount($hBrush)
    Local $iCount, $res, $x
    ;GdipGetPointCount(GpPath* path, INT* count)
    $iCount = DllCall($ghGDIPDll, "int", "GdipGetPathGradientSurroundColorCount", "hwnd", $hBrush, "int*", 0)
    $res = "GdipGetPathGradientSurroundColorCount" & @CRLF
    For $x = 0 To 2
        $res &= $x & "  " & $iCount[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    Return $iCount[2]
EndFunc   ;==>GDIPlus_GetPathGradientSurroundColorCount


;GdipGetPathGradientSurroundColorsWithCount( GpPathGradient *brush, ARGB* color, INT* count)
Func GDIPlus_GetPathGradientSurroundColorsWithCount($hBrush)
    Local $iI, $iCount, $aArgb, $tArgb, $pArgb, $aResult, $res

    $iCount = GDIPlus_GetPathGradientSurroundColorCount($hBrush)
    Local $aArgb[$iCount]


    $aResult = DllCall($ghGDIPDll, "int", "GdipGetPathGradientSurroundColorsWithCount", "hwnd", $hBrush, "int", $aArgb, "int*", $iCount)

    $res = "GdipGetPathGradientSurroundColorsWithCount" & @CRLF
    For $x = 0 To 3
        $res &= $x & "  " & $aResult[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)

    $res = "GdipGetPathGradientSurroundColorsWithCount Array Return" & @CRLF
    For $x = 0 To $iCount - 1
        $res &= $x & "  " & $aArgb[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)

    If @error Then Return SetError(@error, @extended, 0)
    Return $aResult ;SetError($aResult[0], 0, $aResult[2])
EndFunc   ;==>GDIPlus_GetPathGradientSurroundColorsWithCount

; Return number of points in Path
Func GDIPlus_GetPointCount($hPath)
    Local $iCount, $res, $x
    ;GdipGetPointCount(GpPath* path, INT* count)
    $iCount = DllCall($ghGDIPDll, "int", "GdipGetPointCount", "hwnd", $hPath, "int*", 0)
    $res = "GdipGetPointCount" & @CRLF
    For $x = 0 To 2
        $res &= $x & "  " & $iCount[$x] & @CRLF
    Next
    ConsoleWrite($res & @CRLF)
    Return $iCount[2]
EndFunc   ;==>GDIPlus_GetPointCount

;=================> GDIPlus_SetPathGradientCenterPoint ================================
;Description     Sets the center point of this path gradient brush. By default,
;            the center point is at the centroid of the brush's boundary path, but you
;            can set the center point to any location inside or outside the path.
;Parameters  brush    [in] Pointer to the PathGradientBrush object.
;         points    [out] Pointer to a PointF structure that receives the center point.
;Remarks    By default, the center point of a PathGradientBrush object is at the centroid of
;         the brush's boundary path, but you can set the center point to any location, inside
;         or outside the path, by calling the GdipSetPathGradientCenterPoint function.
Func GDIPlus_SetPathGradientCenterPoint($hBrush, $iX, $iY)
    Local $tPoint, $pPoint, $aResult
    $tPoint = DllStructCreate("int X;int Y")
    $pPoint = DllStructGetPtr($tPoint)
    DllStructSetData($tPoint, "X", _WinAPI_FloatToInt($iX))
    DllStructSetData($tPoint, "Y", _WinAPI_FloatToInt($iY))
    $aResult = DllCall($ghGDIPDll, "int", "GdipSetPathGradientCenterPoint", "hwnd", $hBrush, "ptr", $pPoint)
    Return $aResult

EndFunc   ;==>GDIPlus_SetPathGradientCenterPoint

Edit: Reloaded script with Double buffering to redraw on PAINT MSG. It appears to work well. The problem with GDIPlus graphics disappearing seems to be solved.

Again, Well done ProgAndy.

Edited by Malkey
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...