Jump to content
Sign in to follow this  
Hansio

Help with IniRead

Recommended Posts

Hansio

I can not really work it out this.

config.ini
[Section]
Hide=Hide
 
.au3
$var1 = IniRead("config.ini", "Section", "Hide", "NotFound")
Control & $var1("Program Manager", "", "[CLASSNN:SHELLDLL_DefView1]"
Edited by Hansio

Share this post


Link to post
Share on other sites
pieeater

try:

$var1 = IniRead("config.ini", "Section", "Hide", "NotFound")
msgbox(0, "INI File", 'in section "hide" there is "' & $var1 & '" as the value")

as your code


[spoiler]My UDFs: Login UDF[/spoiler]

Share this post


Link to post
Share on other sites
somdcomputerguy

I believe that in order for the AutoIt INI functions to work, there must be a named section in the .ini file. So your config.ini may have to look like this

[section]

Hide=Hide


- Bruce /*somdcomputerguy */  If you change the way you look at things, the things you look at change.

Share this post


Link to post
Share on other sites
Hansio

What I want is to replace ControlHide with ControlShow through my ini file

What it does is to hide my desktop icons

ControlHide("Program Manager", "", "[CLASSNN:SHELLDLL_DefView1]")

Share this post


Link to post
Share on other sites
Hansio

I believe that in order for the AutoIt INI functions to work, there must be a named section in the .ini file. So your config.ini may have to look like this

[section]

Hide=Hide

It is there already, I had just forgotten to write it here

Share this post


Link to post
Share on other sites
sleepydvdr

If $var = "Hide" Then
    ControlHide("Program Manager", "", "[CLASSNN:SHELLDLL_DefView1]")
ElseIf $var = "Show" Then
    ControlShow("Program Manager", "", "[CLASSNN:SHELLDLL_DefView1]")
Else
    MsgBox(0, "Error", "Value not found in INI file.")
EndIf

Edited by sleepydvdr

#include <ByteMe.au3>

Share this post


Link to post
Share on other sites
Hansio

If $var = "Hide" Then
    ControlHide("Program Manager", "", "[CLASSNN:SHELLDLL_DefView1]")
ElseIf $var = "Show" Then
    ControlShow("Program Manager", "", "[CLASSNN:SHELLDLL_DefView1]")
Else
    MsgBox(0, "Error", "Value not found in INI file.")
EndIf

It was exactly what I wanted. Thank you! :-)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • AndreasNWWWWW
      By AndreasNWWWWW
      Hi, i'm curious if this is even possible, i want to do an action if the ini file contains current values under a section.
      for my test i'm looking for 100,200,300,400,500
      and if any of those excits i want to pop a msgbox with the number in the section.
      i can in my example find one, but it does not check everyone. why?  what am i missing?
      Local $iscore810[5] = [100,200,300,400,500] Local $iMax800 = 5 While 1 ;~     Send("{pause}") ;;func les ini fil     $var = IniReadSection("Area.ini", "modus")     If @error Then         MsgBox(4096, "Error", "Unable to read section.")     Else          For $number = 1 To $var[0][0] If $var[$number][1] == $iscore810[3] Then       MsgBox($MB_SYSTEMMODAL, "FAnt den på", $var[$number][0], 5) EndIf                       Next     EndIf     exit WEnd  
    • Jibsbrown
      By Jibsbrown
      Need some help understanding why the ConsoleWrite works inside 2nd For loop but not out side. Between Audit Wiki, Help file , Forum searching (lots of code reading), and YouTube ( shout out to TutsTeach), I have not been able to find the reason why. 
      $sIniPath = "installLog.ini" ; - Get section name $iniSctionNames = IniReadSectionNames($sIniPath) ; - Get Keys and Vaules For $a = 1 to UBound($iniSctionNames) - 1 $keys = IniReadSection($sIniPath , $iniSctionNames[$a]) For $b = 1 to UBound($keys) - 1 $oldSysInfo = IniRead($sIniPath , $iniSctionNames[1], $keys[$b][0], "") $PntIPInfo = IniRead($sIniPath , $iniSctionNames[2], $keys[$b][0], "") $NewPCInfor = IniRead($sIniPath , $iniSctionNames[3], $keys[$b][0], "") ;ConsoleWrite($oldSysInfo & @LF) Next ;ConsoleWrite($oldSysInfo & @LF) Next ConsoleWrite($oldSysInfo) My intention is to use the variables later for Listboxes. Any explanation, forum post links or whatever would help. Sorry also very very new to Autoit.
      Also here's the ini file.
      [OldSysInfo] 4=192.168.0.4|DESKTOP-RDIU2SN|R90M05Q8 5=192.168.0.5|SD0123456789101|R9WGP9P 6=192.168.0.6|SD0123456789102|R9WGP9PT 3=192.168.0.3|DESKTOP-3RS4LKL|R9WGP9P 23=192.168.0.23|SD0123456789102|MXL1234P5I [PrinterIp] 50=192.168.0.50 48=192.168.0.48 47=192.168.0.47 [NewSysInfo] newPC = SD0123456789adfs|192.168.0.185|2UA1234FTR Thank you for your time.
    • damon
      By damon
      @JLogan3o13 I apologize, I did not think of it that way.  I have attached all the code and the Ini File information.  Please let me know if I need to add anything else to help understand what is happening.  thank you.
       
       
       
      Guys, I apologize in advance as I did not search for my answer before posting.  I just could not figure out a way to search that made since so I decided to go ahead and post my question.
       
      Getting to it.
      Background: this is being used to validate file names before moving to a new location.  though i have not included all the code, below is what i am having a problem with.
       I have an ini file that i am reading values from. Func ConfigDefineVars() -- I read the value of $ValidationRDA and everything is good then I set 
      $CaseRDALocationCheck = '$SplitFile[$ValidationRDALocation]' <> $ValidationRDA
      the code that will be used in the select case in Func FileSplitCount().  The problem i have is that even though the numbers = each other they are not recognizing as =.  
      This is what i am getting in my log file i create.
      2017-12-04 14:09:53 : RDA was 2403 should have been 2403:
      If I move $SplitFile[$ValidationRDALocation] <> $ValidationRDA to the Case line under the function it works correctly.
       
      I think this has to do with my use of ' ' around the '$SplitFile[$ValidationRDALocation]' but  i don't know what option i have in Func ConfigDefineVars I am not ready to define $SplitFile.  I have tried adding it to my Global Vars at the top of my script but that did not seem to help.
      There will be more fail this is just the first one in the select case.
       
      Any help or ideas would be greatly appreciated.
       
      thanks,
      Damon
      Example of a filename used.
      DWRSSD-37087-95-026.%-064.00-Tatum Family %-%-1230 Academy Rd-%-PERM-TRUE-2403.pdf
      This file will fail on the 95, it should be 095.  The problem i am getting is with the 2403 it fails even though the ini file value ValidationRDA = 2403 
       
       
      Ini File:
      [SSD_FolderPaths]
      pendingFolder=C:\Users\bg01152\Desktop\SSD Test\pending
      reviewFolder=C:\Users\bg01152\Desktop\SSD Test\review
      completedFolder=C:\Users\bg01152\Desktop\SSD Test\Completed
      FileNetProperties=DocumentTitle,ZipCode,County,MapAndGroupID,ParcelID,PropertyOwner,Subdivision,StreetAddress,LotNumber,DocumentType,Approved,RDANumber
      ValidationDocumentTitle=DWRSSD
      ValidationDocumentTitleLocation=1
      ValidationCountyCodeLocation=3
      ValidationRDA=2403
      ValidationRDALocation=12
      Validation3=TRUE
      Validation3Location=11
      Validation4=PERM
      Validation4Location=10
       
       
      #include <Array.au3> #include <File.au3> #include <MsgBoxConstants.au3> ;------------Global Vars --------------------- Global $SplitFile, $aFileList, $FileLog, $dFolder, $sFolder, $cFolder, $ConfigFile, $t Global $ValidationDocumentTitle, $ValidationDocumentTitleLocation, $ValidationCountyCodeLocation, $ValidationRDA Global $ValidationRDALocation, $Validation3, $Validation3Location, $Validation4, $Validation4Location, $FileNetPropertiesSplit Global $CaseCountyCheck, $CaseRDALocationCheck, $CaseValidation3LocationCheck, $CaseValidation4LocationCheck, $SplitFile ;;--------------------------------Check and Read Config files-------------------------------- $SysConfigFile = @ScriptDir & "\SysConfig.ini" ;----------------PreCheck for Config File-------------- If FileExists ($SysConfigFile) <> 1 Then Exit EndIf ;----------------End PreCheck-------------------------- $FileNetEXE = @ScriptDir & "\" & IniRead ($SysConfigFile, "FileNetUploader","FileName","") $delimiter = IniRead ($SysConfigFile, "FileInformation", "Delimiter","") $Filter = IniRead ($SysConfigFile, "FileInformation", "Filter", "") $ConfigFile = @ScriptDir & "\Config.ini" ;----------------PreCheck for Config File-------------- If FileExists ($ConfigFile) <> 1 Then Exit EndIf ;----------------End PreCheck-------------------------- ;;-------------------------------------------------------------------------------------------- $Sections = IniReadSectionNames ($ConfigFile) ;MsgBox (0,"test", $Sections[0] & @CRLF & $Sections[1] & @CRLF & $Sections[2] & @CRLF & $Sections[3] & @CRLF & $Sections[4]);TESTING ONLY - DELETE WHEN DONE $p = 0 Do $t = 0 ;used for precheck $p = $p + 1 ConfigDefineVars($Sections[$p]) ;MsgBox(0,"ConfigDefineVars", $sFolder & @CRLF & $dFolder & @CRLF & $cFolder);TESTING ONLY - DELETE WHEN DONE PreCheck($dFolder, $sFolder, $cFolder) ;Runs a Pre-check to make sure folder structure exists before running the program If $t = 0 Then ;MsgBox(0,"PreCheck Run", "Running next functions");TESTING ONLY - DELETE WHEN DONE ListArray($sFolder, $Filter) ;Puts File Names in String Array ;_ArrayDisplay ($aFileList, $Sections[$p]) If $t = 0 Then FileSplitCount($dFolder, $aFileList) ;Takes filename String Array and splits by $delimiter ;MsgBox(0,"PreCheck Run2", "Running split function");TESTING ONLY - DELETE WHEN DONE Else ;MsgBox(0,"PreCheck Run2", "Skipping split function");TESTING ONLY - DELETE WHEN DONE EndIf Else ;MsgBox(0,"PreCheck Run", "Skipping next functions");TESTING ONLY - DELETE WHEN DONE EndIf Until $p = $Sections[0] ExitScript() ;Exit script Function Func ConfigDefineVars($SectionsNum);Defines Variables from config file Sections $sFolder = IniRead ($ConfigFile, $SectionsNum, "pendingFolder","") ;Pending Folder, Folder that is awaiting the process $dFolder = IniRead ($ConfigFile, $SectionsNum, "reviewFolder","") ;Review Folder, Files that did not pass validation check and division needs to review $cFolder = IniRead ($ConfigFile, $SectionsNum, "completedFolder","") ;Completed Folder, Once process is completed this would be location files get moved to $FileNetProperties = IniRead ($ConfigFile, $SectionsNum, "FileNetProperties","") $FileNetPropertiesSplit = StringSplit ($FileNetProperties,",") $ValidationDocumentTitle = IniRead ($ConfigFile, $SectionsNum, "ValidationDocumentTitle","") $ValidationDocumentTitleLocation = IniRead ($ConfigFile, $SectionsNum, "ValidationDocumentTitleLocation","") $ValidationCountyCodeLocation = IniRead ($ConfigFile, $SectionsNum, "ValidationCountyCodeLocation","") $ValidationRDA = IniRead ($ConfigFile, $SectionsNum, "ValidationRDA","") $ValidationRDALocation = IniRead ($ConfigFile, $SectionsNum, "ValidationRDALocation","") $Validation3 = IniRead ($ConfigFile, $SectionsNum, "Validation3","") $Validation3Location = IniRead ($ConfigFile, $SectionsNum, "Validation3Location","") $Validation4 = IniRead ($ConfigFile, $SectionsNum, "Validation4","") $Validation4Location = IniRead ($ConfigFile, $SectionsNum, "Validation4Location","") If $ValidationCountyCodeLocation = 999 Then $CaseCountyCheck = 1 <> 1 Else ;MsgBox (0,"test of county code", "location = " &$ValidationCountyCodeLocation) $CaseCountyCheck = StringLen('$SplitFile[$ValidationCountyCodeLocation]') <> 3 ; Checks for 3 digit County Code EndIf If $ValidationRDALocation = 999 Then $CaseRDALocationCheck = 1 <> 1 Else $CaseRDALocationCheck = '$SplitFile[$ValidationRDALocation]' <> $ValidationRDA ; Checks for 4 Digit RDA EndIf If $Validation3Location = 999 Then $CaseValidation3LocationCheck = 1 <> 1 Else $CaseValidation3LocationCheck = '$SplitFile[$Validation3Location]' <> $Validation3 ; Checks that Approved = True EndIf If $Validation4Location = 999 Then $CaseValidation4LocationCheck = 1 <> 1 Else $CaseValidation3LocationCheck = '$SplitFile[$Validation4Location]' <> $Validation4 ; Checks that Document Type = PERM EndIf EndFunc Func ValidationCheck ($check1) $blank = StringLen ($check1) If $check1 Then EndIf EndFunc Func PreCheck($dFolder, $sFolder, $cFolder) ;----------------PreCheck for Destination Folder-------------- If FileExists ($dFolder) <> 1 Then $t = 1 Return Else $FileLog = FileOpen($dFolder & "\FileLog.log", 1) EndIf ;----------------End PreCheck-------------------------- ;----------------PreCheck for Source Folder-------------- If FileExists ($sFolder) <> 1 Then _FileWriteLog($FileLog, "Path to Pending Folder -- " & $sFolder & " -- does not exist") $t = 1 Return EndIf ;----------------End PreCheck-------------------------- ;----------------PreCheck for Completed Folder--------- If FileExists ($cFolder) <> 1 Then _FileWriteLog($FileLog, "Path to Completed Folder -- " & $cFolder & " -- does not exist") $t = 1 Return EndIf ;----------------End PreCheck-------------------------- EndFunc Func ListArray($sFolder, $Filter) $aFileList = _FileListToArray($sFolder, $Filter, 1) ;Create an array of files from the source folder filtering by filetype ;in the config.ini files for the specified section If @error = 1 Then ;MsgBox($MB_SYSTEMMODAL, "", "Path was invalid.") _FileWriteLog($FileLog, "Path to File(s) is Invalid") $t = 1 Return EndIf If @error = 4 Then ;MsgBox($MB_SYSTEMMODAL, "", "No file(s) were found.") _FileWriteLog($FileLog, "No File(s) were found, exiting.") $t = 1 Return EndIf EndFunc ;==>ListArray  
       
       
       
    • Wingens
      By Wingens
      Hi I am trying to read multiple sections from an ini file into an array and use the result to calculate how many records there are from the suppliers and this devided into the status records that belong to it. The problem I am having; I am able to use Ubound to calculate how many record there are in total to the option chosen from the combo box, but where I am getting stuck is the part to link the status and leverancier to each other and count them.
      Hope some one can help me.
      My code right now:
      #include <ComboConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <file.au3> #include <array.au3> $Form1 = GUICreate("Form1", 615, 437, 569, 253) $LEVCOMBO = GUICtrlCreateCombo("", 184, 112, 145, 25, BitOR($CBS_DROPDOWNLIST, $WS_VSCROLL)) Global $aSections = IniReadSectionNames(@ScriptDir & "\leveranciers.ini") If (Not @Error) Then GUICtrlSetData($LEVCOMBO, _ArraytoString($aSections, "|", 1), $aSections[1]) $LABEL = GUICtrlCreateLabel("Totaal aantal RMA aanvragen: ", 48, 200, 250, 21) $TOTALCOUNT = GUICtrlCreateLabel("", 200, 200, 100, 21) $LABEL2 = GUICtrlCreateLabel("Aantal aangevraagd: ", 48, 225, 250, 21) $TOTALAANGEVRAAGD = GUICtrlCreateLabel("", 200, 225, 100, 21) $LABEL3 = GUICtrlCreateLabel("Aantal verzonden: ", 48, 250, 250, 21) $TOTALVERZONDEN = GUICtrlCreateLabel("", 200, 250, 100, 21) $LABEL4 = GUICtrlCreateLabel("Aantal afgehandeld: ", 48, 275, 250, 21) $TOTALAFGEHANDELD = GUICtrlCreateLabel("", 200, 275, 100, 21) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $LEVCOMBO COMBO() EndSwitch WEnd Func COMBO() Local $hINI_FILENAME = @ScriptDir & "\ini.ini" $READAANGEVRAAGDRMA = IniReadSection($hINI_FILENAME, 'LEVERANCIER') $READSTATUS = IniReadSection($hINI_FILENAME, 'STATUS') $VAR = GUICtrlRead($LEVCOMBO) $READAANGEVRAAGDRMACOUNT = _ArrayFindAll($READAANGEVRAAGDRMA, $VAR, Default, Default, Default, Default, 1) GUICtrlSetData($TOTALCOUNT,UBound($READAANGEVRAAGDRMACOUNT)) $nb = $READAANGEVRAAGDRMA[0][0] Local $res[$nb+1][3] $res[0][0] = $nb For $i = 1 to $nb $res[$i][0] = $READAANGEVRAAGDRMA[$i][1] $res[$i][1] = $READSTATUS[$i][1] Next _ArrayDisplay($res) EndFunc And the ini files that goes with it:
      ini.ini:
      [STATUS] 1=Afgehandeld 3=Verzonden 4=Aangevraagd 5=Aangevraagd 6=Aangevraagd 7=Aangevraagd 8=Verzonden 9=Aangevraagd 10=Aangevraagd 11=Aangevraagd 12=Aangevraagd 13=Aangevraagd 14=Aangevraagd 15=Aangevraagd 16=Aangevraagd 17=Aangevraagd 18=Aangevraagd 19=Aangevraagd 20=Aangevraagd 21=Aangevraagd 22=Aangevraagd [LEVERANCIER] 9=Dobit B.V. 1=Dobit B.V. 10=Dobit B.V. 11=Dobit B.V. 12=Dobit B.V. 13=Dobit B.V. 14=Asus 15=Asus 16=Brother 17=Dobit B.V. 18=Dobit B.V. 19=Dobit B.V. 20=Dobit B.V. 21=Dobit B.V. 22=Asus leveranciers.ini:
      [Kies een leverancier...] [Dobit B.V.] URL =http://eline.dobit.be/eline/master.php [TechData B.V.] URL = [MaxICT B.V.] URL = [Brother] URL= [Asus] URL=https://eu-rma.asus.com/pickup_europe/pickup.aspx?country=nl [HP] URL= [Lenovo] URL= [CCV] URL=  
      test.au3
      ini.ini
      leveranciers.ini
    • TheDcoder
      By TheDcoder
      Hello , I was thinking of a situation where a key in a ini file can contain anything, If we were to know if the key does not exists using IniRead, Its not possible to do it without compromising a single possibility... I was thinking that if IniRead were to set @error when a key does not exist, it solves the problem which I mentioned before
       
      What do you think? Would you like this feature?
      TD
×