Jump to content
Sign in to follow this  
forever0donotknowme

improve guinness 's topic

Recommended Posts

Melba23

forever0donotknowme,

What problem? What topic? What needs to be improved? :huh:

M23

Edit: And your script is complete garbage which will not run. :mad2:

Edited by Melba23

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Melba23

forever0donotknowme,

After a time of reflection while preparing the family lunch I have decided that this thread is a complete waste of time - and vaguely insulting towards guinness to boot. If you want help then you need to do the following:

- 1. Start a new thread with a proper descriptive title.

- 2. Explain the problem you are having.

- 3. Attach a working script that shows the problem.

If you fail to do all of the above you will likely get a short holiday because my patience with you is just about at its limit. I have already mentioned to you that your attitude is annoying a lot of members - starting threads like this is not the "remedy" I suggested. So start behaving like a normal member of the forum - or you may not be one for much longer. :naughty:

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Similar Content

    • VollachR
      By VollachR
      Hi,
      I'm looking for a way to take a number value from a Row2 of a 2D array and according to this check if files that appear in rows 3-11 in the array exists.
      For example, if the number in Row2 is 5 I need to check for the files in Row 3-6 only, if it is 6 than rows 3-7 and so on.
      I thought on using a FOR loop but I have very little experience with those.
      Can you suggest the best way to do what I need?
      BTW, the files in Rows 3-11 will usually have blank value for any row above the number in Row2 (e.g. Row2 = 5 so Rows3-6 will have values but 8-11 be empty), The values I need are in Column 1 of the array, the name of the key from the INI file that the array was created from is in Column 0.
      Full Example:
      Row2 of Array:
      Col0 = Games# - Col1 = 5
      Rows3-6
      Col0 = Exe2 - Col1 = Path To File
      Col0 = Exe3 - Col1 = Path To File
      Col0 = Exe4 - Col1 = Path To File
      Col0 = Exe5 - Col1 = Path To File
      I need that if Row2 is 5 to check these above for rows if the file exists, if it was 6 then the next row as well and so on up until number 10 in Row2 as it can't go above 10.
      So basically for whatever number in Row2 from 2-10 need to check 1-9 rows from 3-11 to see if the files in Col1 exists and if any of them don't exist it should call a function that shows an error message.
      I'm pretty sure I have the first line of the for look correct:
      For $i = 1 To $aAIO[2][1] Just not sure how to continue from there, also not sure if $i should be equal 1 or 2.
      Help will be appreciated.
    • VollachR
      By VollachR
      Hi,
      I've written a specialty INI file editor for a specific set of INI files related to a bigger script I'm working on.
      I'm trying to create a verification script that checks the ini files structure and format and gives an error if they are not in expected format.
      What I did so far is create a couple of custom arrays, each with the list of Sections expected in the files and I use IniReadSectionNames in order to read the sections from the selected INI file and compare it to the array.
      It works fine, excepts it only gives an error if one or more of the sections in the custom array is missing, if they all exist but there are other additional sections that shouldn't be there it doesn't give an error and continue to open the editor screen.
      Here are the relevant part of my script:
      The Custom Verification Arrays:
      ;Creating Arrays for INI Verification Global $aSettingsVerify[7] $aSettingsVerify[1] = "Conversion" $aSettingsVerify[2] = "AIO" $aSettingsVerify[3] = "Data" $aSettingsVerify[4] = "Redist" $aSettingsVerify[5] = "Split" $aSettingsVerify[6] = "Autorun" Global $aDataVerify[6] $aDataVerify[1] = "Compression" $aDataVerify[2] = "Exclude" $aDataVerify[3] = "LangExclude" $aDataVerify[4] = "PreCommands" $aDataVerify[5] = "PostCommands" The IniReadSectionNames verification part:
      Case $OK If StringInStr($ActiveConfig, "Settings.ini") Then $CheckArray1 = IniReadSectionNames($ActiveConfig) $CheckArray2 = _ArrayCompare($aSettingsVerify, $CheckArray1) $CheckArray3 = UBound($CheckArray2, 1) If $CheckArray3 = 1 Then GUIDelete($ConfigStart) SettingsGUI() EndIf If $CheckArray3 > 1 Then WrongIni() EndIf EndIf If StringInStr($ActiveConfig, "Data") Then $CheckArray1 = IniReadSectionNames($ActiveConfig) $CheckArray2 = _ArrayCompare($aDataVerify, $CheckArray1) $CheckArray3 = UBound($CheckArray2, 1) If $CheckArray3 = 1 Then GUIDelete($ConfigStart) DataGUI() EndIf If $CheckArray3 > 1 Then WrongIni() EndIf EndIf The Function that performs the compare: (Found it in another thread on this forums somewhere by using Google Search)
      ;Compares Imported INI file with the Verification array Func _ArrayCompare(ByRef $a1, ByRef $a2) Local $nOldSize = UBound($a2) Local $a3[$nOldSize], $nNewSize = $nOldSize For $i = 0 To UBound($a1) - 1 For $j = 0 To $nOldSize - 1 If Not $a3[$j] And ($a1[$i] = $a2[$j]) Then $a3[$j] = 1 $nNewSize -= 1 EndIf Next Next Local $a4[$nNewSize], $j = 0 For $i = 0 To $nOldSize - 1 If Not $a3[$i] Then $a4[$j] = $a2[$i] $j += 1 EndIf Next Return $a4 EndFunc ;==>_ArrayCompare  
      Any way to make a check if there are sections other than the ones in the Verification Array and produce an error?
      Thanks
    • VollachR
      By VollachR
      Hi,
      I'm using _FileListToArray to create an array listing .ini files in a specific folder, problem is, I want only the file named Settings.ini and any Files named Data#.ini where # is actually a number, I don't want any other .ini file that may be there even though it shouldn't be there to be included in the array.
      Is it possible to use multiple filters in _FileListToArray? or is there another way to do what I'm looking for?
      My current code:
      $IniList = _FileListToArray(@ScriptDir & "\Settings", "*.ini", 1, False) _ArraySort($IniList, 1, 1) _ArraySort($IniList, 0, 2) $IniOptions = _ArrayToString($IniList, "|", 1)  
      Thank you.
    • VollachR
      By VollachR
      Hi,
      I'm creating a tool to edit some ini files that belong to a program I'm working on...
      Basically everything work fine except I can't find a way to check if the if the WriteIniSection operation was successful...
      For Example, let's say the INI file is by mistake or some other reason Read Only, or the user don't have the right permission to write to the file or the folder it's in... Right now, in such a case The INI file, as expected, won't get updated, but I when I perform an if error or if not error checks I always get the msgbox for the if not error.
      Here's the relevant code part:
       
      IniWriteSection(@ScriptDir & "\Settings\Settings.ini", "Conversion", $aConversion, 1) IniWriteSection(@ScriptDir & "\Settings\Settings.ini", "AIO", $aAIO, 1) IniWriteSection(@ScriptDir & "\Settings\Settings.ini", "Data", $aData, 1) IniWriteSection(@ScriptDir & "\Settings\Settings.ini", "Redist", $aRedist, 1) IniWriteSection(@ScriptDir & "\Settings\Settings.ini", "Split", $aSplit, 1) IniWriteSection(@ScriptDir & "\Settings\Settings.ini", "Autorun", $aAutorun, 1) If Not @error Then MsgBox($MB_ICONINFORMATION, "Success", "Settings.ini Saved Successfully") Else If @error Then MsgBox($MB_ICONERROR, "Failure", "Settings.ini Could Not Be Saved!" & @CRLF & @CRLF & "Please Check If The File Is ReadOnly And That You Have Permission To Change It Or Its Location") EndIf EndIf  
      How can I perform a check to see if the ini file was written to successfully?
      Thanks.
    • VollachR
      By VollachR
      Hi,
      I'd like to show a progress bar for an operation performed by an external program my script is running silently, I want to show it in a GUI I created using the GUICtrlCreateProgress but I have no idea how to do it.
      The important thing to point out is that there's no way of knowing how long the external program will run, as it is a file splitter and it depends on the size of file it splits and the split parts size.
      Can someone point me in the right direction or give me an example how to do so?
      This is my RunWait command:
      RunWait($MYFILES1 & '\fsplit.exe -split ' & $Size & ' mb ' & $File & " -f " & $File & "." & $extension) It uses multiple variables declared and set earlier in the script, how will I got about having the progress of that command shown using GUICtrlCreateProgress ? Is it possible?
      Thank you.
×