Jump to content
Sign in to follow this  
JonBMN

[SOLVED]Putting Array values into GUI box (getting all values into the array)

Recommended Posts

JonBMN

I'm trying to take array values which I can't seem to get all the values into the array to send to the GUI window and I can't seem to get the array to even go into the GUI window. Here is the FULL code I'm working with.

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Icon=Green.ico
#AutoIt3Wrapper_Outfile=DriverInstall.exe
#AutoIt3Wrapper_Run_Obfuscator=y
#Obfuscator_Parameters=/so
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
AutoItWinSetTitle("Driver Install")
AutoItSetOption("MustDeclareVars", 1)
Opt("TrayMenuMode", 0)
#NoTrayIcon
#include-once
#RequireAdmin

#include <GUIconstants.au3>
#include <myerror.au3>
#include <misc.au3>
#include <Array.au3>

If _Singleton("Driver Install", 1) = 0 Then
Exit
EndIf

Local $Result
Local $NumComports = -1, $OrigPortNum[30]
Local $NewPortNum[30], $NewNumComports = -1
Local $GUIhandle, $CM[10], $AddedPort, $msg, $newports[20], $oldports[20]

; Update registry to ignor dongle serial number
$Result = RegWrite("HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\UsbFlags", "IgnoreHWSerNum04036001", "REG_BINARY", Chr(1))
If $Result = 0 Then
$ErrorTitle = "Error Updating Registry"
$ErrorMessage = "Unable to update registry UsbFlags"
$IsErrorFatal = True
MyError()
EndIf

MsgBox(0, "Alert!", "Please make sure OBD processor is not plugged into the computer.")

BuildOriginal()
Run("CDM20828.EXE")
MsgBox(0, "Alert!", "Now plug in the OBD processor into the USB port on the computer. When you have plugged it in click OK.")
BuildNew()
GUIwindow()
While 1
$msg = GUIGetMsg()
Select
Case $msg = $GUI_EVENT_CLOSE
Quit()
EndSelect
WEnd
Exit

Func Quit()
Exit
EndFunc

Func BuildOriginal()
Local $Instance = 1, $Key = "", $Port = "", $Found = False
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NumComports += 1
$OrigPortNum[$NumComports] = $Port
$Instance += 1
WEnd
for $Instance = 0 To $NumComports
_ArrayPush($OrigPortNum,$OrigPortNum[$Instance], 0)
Next
EndFunc




Func BuildNew()
Local $Instance = 1, $Key = "", $Port = "", $Found = False, $i = 0
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NewNumComports += 1
$NewPortNum[$NewNumComports] = $Port
$Instance += 1
WEnd
for $Instance = 0 To $NewNumComports
_ArrayPush($NewPortNum,$NewPortNum[$Instance], 0)
Next
For $i = 0 To $NewNumComports
If ($NewPortNum[$i] <> $OrigPortNum[$i]) Then
;MsgBox(0, "Alert!", "Found new Port!" & $NewPortNum[$i])
$Addedport = $NewPortNum[$i]
ExitLoop
EndIf
Next
EndFunc

Func GUIwindow()
$GUIhandle = GUICreate("Port Settings", 455, 325)
GUICtrlCreateLabel("-Before OBD doggle plugin-", 15, 25)
$CM[1] = GUICtrlCreateEdit("", 15, 45, 180, 100, 400)
GUICtrlSetData($CM[1], $OrigPortNum, $OrigPortNum)
GUICtrlCreateLabel("-After OBD doggle plugin-", 250, 25)
$CM[2] = GUICtrlCreateEdit("", 250, 45, 180, 100, 400)
GUICtrlSetData($CM[2], $NewPortNum, $NewPortNum)
GUICtrlCreateLabel("This is the added port:", 15, 300)
$CM[3] = GUICtrlCreateEdit("", 120, 300, 150, 20)
GUICtrlSetData($CM[3], $AddedPort, $AddedPort)
GUISetState(@SW_SHOW) ;shows the GUI window
EndFunc
Edited by JonBMN

Share this post


Link to post
Share on other sites
BrewManNH

Well, you can't apply the contents of an array to an edit box directly. You should loop through the array and add each value to a string, and then use the string to update the edit control.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
JonBMN

Any chance you could give me a basic example of this?

Share this post


Link to post
Share on other sites
Melba23

JonBMN,

About as basic as I can make it: ;)

#include <GUIConstantsEx.au3>

; Here is the array
Global $aLines[4] = [3, "Line 1", "Line 2", "Line 3"]

$hGUI = GUICreate("Test", 500, 500)

$cEdit = GUICtrlCreateEdit("", 10, 10, 200, 200)

$cButton = GUICtrlCreateButton("Load Array", 10, 400, 80, 30)

GUISetState()

While 1

    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $cButton
            ; Start with an empty string
            $sData = ""
            ; Loop through the array and add each line to the string - do not forget the line break
            For $i = 1 To $aLines[0]
                $sData &= $aLines[$i] & @CRLF
            Next
            ; And finally, add the string to the edit
            GUICtrlSetData($cEdit, $sData)
    EndSwitch

WEnd

All clear?

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
JonBMN

Yes, thank you!

Share this post


Link to post
Share on other sites
BrewManNH

This example is a very basic demo that shows what I was talking about.

You don't really need the _ArrayToString function if you build the string as you build the array, but I used it for simplicity.

#include <GUIconstants.au3>
#include <misc.au3>
#include <Array.au3>

If _Singleton("Driver Install", 1) = 0 Then
    Exit
EndIf

Local $Result
Local $NumComports = -1, $sOrigPortNum
Local $sNewPortNum, $NewNumComports = -1
Local $GUIhandle, $CM[10], $AddedPort, $msg, $newports[20], $oldports[20]

BuildOriginal()
BuildNew()
GUIwindow()
While 1
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            Quit()
    EndSelect
WEnd

Func BuildNew()
    Local $NewPortNum[30]
    For $I = 0 To 29
        $NewPortNum[$I] = $I
    Next
    $sNewPortNum = _ArrayToString($NewPortNum, @CRLF)
EndFunc   ;==>BuildNew

Func BuildOriginal()
    Local $OrigPortNum[30]
    For $I = 0 To 29
        $OrigPortNum[$I] = $I
    Next
    $sOrigPortNum = _ArrayToString($OrigPortNum, @CRLF)
EndFunc   ;==>BuildOriginal

Func GUIwindow()
    $GUIhandle = GUICreate("Port Settings", 455, 325)
    GUICtrlCreateLabel("-Before OBD dongle plugin-", 15, 25)
    $CM[1] = GUICtrlCreateEdit("", 15, 45, 180, 100, 400)
    GUICtrlSetData($CM[1], $sOrigPortNum)
    GUICtrlCreateLabel("-After OBD dongle plugin-", 250, 25)
    $CM[2] = GUICtrlCreateEdit("", 250, 45, 180, 100, 400)
    GUICtrlSetData($CM[2], $sNewPortNum)
    GUICtrlCreateLabel("This is the added port:", 15, 300)
    $CM[3] = GUICtrlCreateEdit("", 120, 300, 150, 20)
    GUICtrlSetData($CM[3], $AddedPort, $AddedPort)
    GUISetState(@SW_SHOW) ;shows the GUI window
EndFunc   ;==>GUIwindow

Func Quit()
    Exit
EndFunc   ;==>Quit


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
JonBMN

Thank you both. Both examples will give me a better understanding of what is going on.

Share this post


Link to post
Share on other sites
JonBMN

It seems to be only putting in the last value of the array that's being looped through into the $orig = "" which is my initialized string variable that I want to hold all my array values.

Func BuildOriginal()
Local $Instance = -1, $Key = "", $Port = "", $Found = False
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NumComports += 1
$OrigPortNum[$NumComports] = $Port
$Instance += 1
WEnd
for $Instance = 0 To $NumComports
$orig = $OrigPortNum[$Instance] & @CRLF
Next
EndFunc

so if I had two com ports 13 and 35 the only one it sends to the GUI is 35.

Edited by JonBMN

Share this post


Link to post
Share on other sites
BrewManNH

You're missing the "&" before the "=".

$orig &= $OrigPortNum[$Instance] & @CRLF


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
JonBMN

After adding that, I seem to get nothing from the BuildOriginal() function, but the BuildNew() function seems to be working perfectly...

Local $orig = "", $new = ""
Func BuildOriginal()
Local $Instance = -1, $Key = "", $Port = "", $Found = False
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NumComports += 1
$OrigPortNum[$NumComports] = $Port
$Instance += 1
WEnd
for $Instance = 0 To $NumComports
$orig &= $OrigPortNum[$Instance] & @CRLF
Next
EndFunc




Func BuildNew()
Local $Instance = 1, $Key = "", $Port = "", $Found = False, $i = 0
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NewNumComports += 1
$NewPortNum[$NewNumComports] = $Port
$Instance += 1
WEnd
for $Instance = 0 To $NewNumComports
$new &= $NewPortNum[$Instance] & @CRLF
Next
For $i = 0 To $NewNumComports
If ($NewPortNum[$i] <> $OrigPortNum[$i]) Then
;MsgBox(0, "Alert!", "Found new Port!" & $NewPortNum[$i])
$Addedport = $NewPortNum[$i]
ExitLoop
EndIf
Next
EndFunc
Edited by JonBMN

Share this post


Link to post
Share on other sites
BrewManNH

You declared the $Instance variable in BuildNew as -1 instead of 1.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
JonBMN

Ah the little things! thanks for catching that one BrewManNH

Share this post


Link to post
Share on other sites
JonBMN

My program seems to be working perfectly, but when I move it over to a windows XP for testing the $orig and $new values do not show up in the edit control, but I put a msgbox and saw all the com ports from these variables. Any answers to why it may not be showing up?

Edited by JonBMN

Share this post


Link to post
Share on other sites
BrewManNH

No clue, I don't have an XP machine to test it on.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
JonBMN

Local $orig = "", $new = ""
Func BuildOriginal()
Local $Instance = -1, $Key = "", $Port = "", $Found = False
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NumComports += 1
$OrigPortNum[$NumComports] = $Port
$Instance += 1
WEnd
for $Instance = 0 To $NumComports
$orig &= $OrigPortNum[$Instance] & @CRLF
Next
EndFunc




Func BuildNew()
Local $Instance = 1, $Key = "", $Port = "", $Found = False, $i = 0
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NewNumComports += 1
$NewPortNum[$NewNumComports] = $Port
$Instance += 1
WEnd
for $Instance = 0 To $NewNumComports
$new &= $NewPortNum[$Instance] & @CRLF
Next
For $i = 0 To $NewNumComports
If ($NewPortNum[$i] <> $OrigPortNum[$i]) Then
;MsgBox(0, "Alert!", "Found new Port!" & $NewPortNum[$i])
$Addedport = $NewPortNum[$i]
ExitLoop
EndIf
Next
EndFunc

Figured out what was going wrong on the XP machine. It was not the fact that it was an XP it had to many values in the array for the SetData to put into the Edit control. Posting BuildOriginal() function, BuildNew() function along with GUI function.. Not going to post first half as it is posted at top.

Local $orig = "", $new = ""
Func BuildOriginal()
Local $Instance = 1, $Key = "", $Port = "", $Found = False
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NumComports += 1
$OrigPortNum[$NumComports] = $Port
$orig &= $Port & " ** " & $Key & @CRLF
$Instance += 1
WEnd
EndFunc




Func BuildNew()
Local $Instance = 1, $Key = "", $Port = "", $Found = False, $i = 0
While 1
$Key = RegEnumVal("HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM", $Instance)
If @error = -1 Then
ExitLoop
     EndIf
$Port = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM",$Key )
$NewNumComports += 1
$NewPortNum[$NewNumComports] = $Port
$new &= $Port & " ** " & $Key & @CRLF
$Instance += 1
WEnd
For $i = 0 To $NewNumComports
If ($NewPortNum[$i] <> $OrigPortNum[$i]) Then
$Addedport = $NewPortNum[$i]
ExitLoop
EndIf
Next
EndFunc

Func GUIwindow()
$GUIhandle = GUICreate("Port Settings", 455, 325)
GUICtrlCreateLabel("-Before OBD doggle plugin-", 15, 25)
$CM[1] = GUICtrlCreateEdit("", 15, 45, 180, 200)
GUICtrlSetData($CM[1], $orig, $orig)
GUICtrlCreateLabel("-After OBD doggle plugin-", 250, 25)
$CM[2] = GUICtrlCreateEdit("", 250, 45, 180, 200)
GUICtrlSetData($CM[2], $new, $new)
GUICtrlCreateLabel("This is the added port:", 15, 300)
$CM[3] = GUICtrlCreateEdit("", 120, 300, 150, 20)
GUICtrlSetData($CM[3], $AddedPort, $AddedPort)
GUISetState(@SW_SHOW) ;shows the GUI window
EndFunc

EDIT: cleaned up the code a bit in BuildOriginal() and BuildNew()

Edited by JonBMN

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • Sven-Seyfert
      By Sven-Seyfert
      Hi Community,

      I use a UDF by @smashly to play a video in a GUI. That works fine for my main monitor.
      But when I change the X and Y positions of the GUI (also for the video) to my second or third monitor, the video plays, I can hear the sound of it, but I don't see the video.

      I debugged the UDF and checked the Microsoft description for MCI Command Strings which are used in the UDF (docs.microsoft...) - everything is fine, so I got no clue why the video isn't displayed.

      PlayVideoTest.au3:
       
      VideoInGui_by_Smashky.au3 (UDF):
       
      The example video:
       
      It would be great when anyone can help .
      Is there maybe a other way to play (display videos in GUI)?

      Thanks for any suggestion - I'm grateful!
      Sven
    • lattey
      By lattey
      hi,
      i have checkboxes and each checkbox that checked, i put in array. 
      now, im stuck on how to loop the checked array and store in in one variable. what i can do now, is only write the result into a text file. 
      below is the code:
      #include <GUIConstantsEx.au3> ;~ #include <MsgBoxConstants.au3> #include <ButtonConstants.au3> #include <Array.au3> Global $Count = 3 Global $CheckBoxP[$Count] Global $step[$Count] global $array1[1] Global $ExitResult $hGUI = GUICreate("Summary Steps", 500, 400) GUISetFont(12, 400, "Tahoma") GUICtrlCreateLabel( "Please Select the Summary Steps for Script Check", 70, 20) GUISetFont(10, 400, "Tahoma") Global $array_Pstep[3] = ["fix2","fix1","fix3"] global $step[3] = ["2","3","4"] $Spacing = 50 For $i = 0 To UBound($array_Pstep) - 1 $CheckBoxP[$i] = GUICtrlCreateCheckbox($array_Pstep[$i], 80, $Spacing + (20 * $i), 65, 17) Next $submit = GUICtrlCreateButton("Submit",180, 280, 80, 30) $exit = GUICtrlCreateButton("Exit",180, 320, 80, 30) GUISetState() While 1 $Msg = GUIGetMsg() Select case $Msg=$submit For $i = 0 To $Count - 1 If GUICtrlRead($CheckBoxP[$i]) = $GUI_CHECKED Then _ArrayAdd($array1, $step[$i]) EndIf Next Global $logfilerray = @WorkingDir & "\checkedlist.txt" FileDelete ($logfilerray) Global $readlogfile = FileOpen($logfilerray,1) for $a = 1 to UBound($array1) - 1 ;~ $var=$array1[$a] FileWriteLine($readlogfile,$array1[$a]) Next FileClose($readlogfile) Exit case $Msg=$exit $ExitResult = MsgBox(1,"Summary Step", "Continue to Exit ?") if $ExitResult = 1 Then ;ok Exit EndIf Exit EndSelect WEnd  
    • omicron
      By omicron
      How do you perform a nested loop function with a multidimensional array from 2 lists.
      for i in list1
      (open file) extract variable
          while open for i in list 2
          (open file2) extract variable
       
      var1 + var2 = (search term)

      The list sizes will more than likely consist of different lengths.
       
      What is the best approach to accomplishing this method?
             
    • UEZ
      By UEZ
      Following script shows a parent GUI with a child GUI initialized as MDICHILD.
      #include <Constants.au3> #include <GUIConstantsEx.au3> #include <GuiReBar.au3> #include <GuiScrollBars.au3> #include <GuiToolbar.au3> #include <ScreenCapture.au3> #include <ScrollBarConstants.au3> #include <WindowsConstants.au3> _GDIPlus_Startup() Global Enum $idNew = 1000, $idOpen, $idSave, $idHelper Global Const $iImageW = @DesktopWidth, $iImageH = @DesktopHeight Global Const $hBMP_ScreenCapture = _ScreenCapture_Capture("", 0, 0, $iImageW, $iImageH, False) Global Const $hBitmap = _GDIPlus_BitmapCreateFromHBITMAP($hBMP_ScreenCapture) Sleep(50) Global Const $iW = 1500, $iH = 700, $SC_DRAGMOVE = 0xF012 Global Const $hGUI = GUICreate("Move child GUI within GUI", $iW, $iH) Global Const $hToolbar = _GUICtrlToolbar_Create($hGUI) Global Const $hReBar = _GUICtrlRebar_Create($hGUI, BitOR($CCS_TOP, $RBS_VARHEIGHT, $RBS_AUTOSIZE, $RBS_BANDBORDERS)) Global Const $height_delta = 37 Global Const $idPic = GUICtrlCreatePic("", 0, $height_delta + 2, $iW, $iH) Global $hBitmap_tmp, $hHBitmap_tmp $hBitmap_tmp = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Global $hGfx_Context = _GDIPlus_ImageGetGraphicsContext($hBitmap_tmp) _GUICtrlToolbar_AddBitmap($hToolbar, 1, -1, $IDB_STD_LARGE_COLOR) _GUICtrlToolbar_AddButton($hToolbar, $idNew, $STD_FILENEW) _GUICtrlToolbar_AddButton($hToolbar, $idOpen, $STD_FILEOPEN) _GUICtrlToolbar_AddButton($hToolbar, $idSave, $STD_FILESAVE) _GUICtrlToolbar_AddButtonSep($hToolbar) _GUICtrlToolbar_AddButton($hToolbar, $idHelper, $STD_HELP) _GUICtrlRebar_AddToolBarBand($hReBar, $hToolbar, "", 0) Global Const $iVSscroll = _WinAPI_GetSystemMetrics(2) Global Const $iHSscroll = _WinAPI_GetSystemMetrics(3) Global Const $iYCaption = _WinAPI_GetSystemMetrics(4) Global Const $iYFixedFrame = _WinAPI_GetSystemMetrics(8) Global Const $iXFixedFrame = _WinAPI_GetSystemMetrics(7) Global Const $iMetricsSumX = $iVSscroll + $iXFixedFrame * 2 Global Const $iMetricsSumY = $iHSscroll + $iYCaption + $iYFixedFrame _GUIScrollBars_Init($hGUI) _GUIScrollBars_SetScrollInfoMin($hGUI, $SB_HORZ, 0) _GUIScrollBars_SetScrollInfoMax($hGUI, $SB_HORZ, $iImageW - $iW + 61 + $iMetricsSumX) _GUIScrollBars_SetScrollInfoMin($hGUI, $SB_VERT, 0) _GUIScrollBars_SetScrollInfoMax($hGUI, $SB_VERT, $iImageH - $iH + $iMetricsSumY + $height_delta - 1) GUISetState(@SW_SHOW, $hGUI) Global Const $STM_SETIMAGE = 0x0172 _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hBMP_ScreenCapture)) Global $IE_offset_x = 0, $IE_offset_y = 0 DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) GUIRegisterMsg($WM_HSCROLL, "WM_HSCROLL_IE") GUIRegisterMsg($WM_VSCROLL, "WM_VSCROLL_IE") Global $iPosX_Crop = 0, $iPosY_Crop = 0, $iW_crop = 200, $iH_crop = 200, $bMove_Crop = True Global $hGUI_IE_Crop = GUICreate("", $iW_crop, $iH_crop, $iPosX_Crop, $iPosY_Crop) GUISetStyle(BitOR($WS_BORDER, $WS_POPUP), $WS_EX_MDICHILD) _WinAPI_SetParent($hGUI_IE_Crop, $hGUI) WinSetTrans($hGUI_IE_Crop, "", 0xA0) Global $iLable_CropMove = GUICtrlCreateLabel("", 0, 0, $iW_crop, $iH_crop, -1, $GUI_WS_EX_PARENTDRAG) GUISetState(@SW_SHOW, $hGUI_IE_Crop) GUIRegisterMsg($WM_MOVE, "WM_MOVE_IE_GUI_Crop") ;~ GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN") Do Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch Until False GUIRegisterMsg($WM_HSCROLL, "") GUIRegisterMsg($WM_VSCROLL, "") GUIRegisterMsg($WM_MOVE, "") GUIRegisterMsg($WM_LBUTTONDOWN, "") _WinAPI_DeleteObject($hBMP_ScreenCapture) _GDIPlus_BitmapDispose($hBitmap_tmp) _GDIPlus_BitmapDispose($hBitmap) _GDIPlus_GraphicsDispose($hGfx_Context) _GDIPlus_Shutdown() Exit Func WM_HSCROLL_IE($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $Min, $Max, $Page, $TrackPos ; Get all the horizontal scroll bar information Local $tSCROLLINFO_X = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_HORZ) $Min = DllStructGetData($tSCROLLINFO_X, "nMin") $Max = DllStructGetData($tSCROLLINFO_X, "nMax") $Page = DllStructGetData($tSCROLLINFO_X, "nPage") ; Save the position for comparison later on $IE_offset_x = DllStructGetData($tSCROLLINFO_X, "nPos") $TrackPos = DllStructGetData($tSCROLLINFO_X, "nTrackPos") #forceref $Min, $Max Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Switch $nScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x - $Page) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $TrackPos) EndSwitch DllStructSetData($tSCROLLINFO_X, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO_X) $IE_offset_x = DllStructGetData($tSCROLLINFO_X, "nPos") DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) $hHBitmap_tmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap_tmp) _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap_tmp)) _WinAPI_DeleteObject($hHBitmap_tmp) $bMove_Crop = False ConsoleWrite($iPosX_Crop & ", " & $iPosY_Crop & " / " & $IE_offset_x & ", " & $IE_offset_y & @CRLF) WinMove($hGUI_IE_Crop, "", -$IE_offset_x + $iPosX_Crop, -$IE_offset_y + $iPosY_Crop) ;~ DllCall("user32.dll", "bool", "MoveWindow", "hwnd", $hGUI_IE_Crop, "int", -$IE_offset_x + $iPosX_Crop, "int", -$IE_offset_y + $iPosY_Crop, "int", $iW_crop, "int", $iH_crop, "bool", True) $bMove_Crop = True Return "GUI_RUNDEFMSG" EndFunc ;==>WM_HSCROLL_IE Func WM_VSCROLL_IE($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $Min, $Max, $Page, $TrackPos ;~ ; Get all the horizontal scroll bar information Local $tSCROLLINFO_Y = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO_Y, "nMin") $Max = DllStructGetData($tSCROLLINFO_Y, "nMax") $Page = DllStructGetData($tSCROLLINFO_Y, "nPage") ; Save the position for comparison later on $IE_offset_y = DllStructGetData($tSCROLLINFO_Y, "nPos") $TrackPos = DllStructGetData($tSCROLLINFO_Y, "nTrackPos") #forceref $Min, $Max Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Switch $nScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y - $Page) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $TrackPos) EndSwitch DllStructSetData($tSCROLLINFO_Y, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO_Y) $IE_offset_y = DllStructGetData($tSCROLLINFO_Y, "nPos") DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) $bMove_Crop = False ConsoleWrite($iPosX_Crop & ", " & $iPosY_Crop & " / " & $IE_offset_x & ", " & $IE_offset_y & @CRLF) WinMove($hGUI_IE_Crop, "", -$IE_offset_x + $iPosX_Crop, -$IE_offset_y + $iPosY_Crop) ;~ DllCall("user32.dll", "bool", "MoveWindow", "hwnd", $hGUI_IE_Crop, "int", -$IE_offset_x + $iPosX_Crop, "int", -$IE_offset_y + $iPosY_Crop, "int", $iW_crop, "int", $iH_crop, "bool", True) $bMove_Crop = True Return "GUI_RUNDEFMSG" EndFunc ;==>WM_VSCROLL_IE Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam) _SendMessage($hGUI_IE_Crop, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndFunc ;==>_WM_LBUTTONDOWN Func WM_MOVE_IE_GUI_Crop($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam If $hWnd = $hGUI_IE_Crop And $bMove_Crop Then $iPosX_Crop = _WinAPI_LoWord($lParam) $iPosY_Crop = _WinAPI_HiWord($lParam) EndIf Return "GUI_RUNDEFMSG" EndFunc ;==>WM_MOVE_IE_GUI_Crop Func WM_SIZE_IE_GUI_Crop($hWnd, $iMsg, $wParam, $lParam) Return $GUI_RUNDEFMSG EndFunc ;==>WM_SIZE_IE_GUI_Crop Func DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) _GDIPlus_GraphicsDrawImageRectRect($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH, 0, 0, $iW, $iH) $hHBitmap_tmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap_tmp) _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap_tmp)) _WinAPI_DeleteObject($hHBitmap_tmp) EndFunc  
      My problem: if you move the child window at left upper corner to another place and move either H or V scrollbar the child GUI will be moved properly. BUT if you have scrolled the scrollbars to the right bottom of the image and move the child GUI to that corner, too then the child GUI jumps if you click on one of the scrollbars.
      Is there something that I didn't consider?
    • omicron
      By omicron
      Hello!

      I am working on a function that I am just getting lost on. The goal is a multiple nested loop.

      Here are the steps:
      Contents of file1.txt::
      [topic] var1=Name var2=OtherName var3=SomeotheName Contents of file2.txt::
      [subTopic] top=sub1 top2=sub2 top3=sub3 The Shell I am working from::
      #include <file.au3> $file = "c:\yourfile.txt" FileOpen($file, 0) For $i = 1 to _FileCountLines($file) $line = FileReadLine($file, $i) msgbox(0,'','the line ' & $i & ' is ' & $line) Next FileClose($file) Understanding however that the "msgbox" needs to then become a variable. in example the following::
      $file = "c:\yourfile.txt" FileOpen($file, 0) While true( prog.exe is running && "WinName" is open) do For $i = 1 to _FileCountLines($file) $line = FileReadLine($file, $i) ;Open File to log "current location of file 1" FileWriteLine ("filename", $i & ' is ' & $line) var = $line Next $file2 = "c:\yourfile.txt" FileOpen($file, 0) For $i = 1 to _FileCountLines($file) $line = FileReadLine($file, $i) ; OpenFile to log "Current location of file 2" FileWriteLine ("filename", $i & ' is ' & $line) Next FileClose($file2) FileClose($file) The goal in written form is the following ::

      While in "OpenWindow"
          read from file 1 starting at line 1 until end of file.
         file 1 is a list of names to be searched.
         With $line selected, add this element to the element in file 2.
       
      The search of a variables in list 1 and list 2 differ on the amount of posts that day. (This is not a web based platform, it is a game) I need to search 2 names and take a screenshot of the out put. The sizes of the names list depend on the activity of names at the time of search.
      This loop continues until all the names from both lists have been searched. Mostly in the format of::
      File1= item
      File2= Vendor
       
      Item + Vendor  ( Capture screen, scroll) -- Not sure how to detect if I need to scroll)
       
      Thank you for your help and support!
×