Sign in to follow this  
Followers 0
Wingens

Help creating licence key input box

4 posts in this topic

Hi all,

i am struggeling with a problem creating a input box wich will automatic seperate the input letters with a - after 5 characters.

example: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

i all ready have it limited to 29 characters and max of 29 characters.

I hope any one can help me with this.

The purpose for the script is, an automatic network installation of Windows 8.

forum post.au3

Share this post


Link to post
Share on other sites



Wingens,

Something like this perhaps? :huh:

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <EditConstants.au3>

Global $iChar_Limit = 5, $aInput[5]

$hGUI = GUICreate("Input Autofocus", 500, 500)

; ######################
; It is important that these controls are created in immediate succession
For $i = 0 To UBound($aInput) - 1
    $aInput[$i] = GUICtrlCreateInput("", 20 + (60 * $i), 20, 40, 20)
    GUICtrlSetLimit(-1, $iChar_Limit)
    If $i Then
        GUICtrlSetState(-1, $GUI_DISABLE)
    EndIf
Next
$hButton = GUICtrlCreateButton("OK", 75, 60, 80, 30)
GUICtrlSetState(-1, $GUI_DISABLE)
; ######################

For $i = 0 To 3
    GUICtrlCreateLabel("-", 70 + (60 * $i), 20, 10, 20)
Next

GUIRegisterMsg($WM_COMMAND, "On_WM_COMMAND")

GUISetState()

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $hButton
            $sString = ""
            For $i = 0 To UBound($aInput) - 1
                $sString &= GUICtrlRead($aInput[$i])
            Next
            MsgBox(0, "Result", $sString)
    EndSwitch
WEnd

Func On_WM_COMMAND($hWnd, $Msg, $wParam, $lParam)

    $iCode = BitShift($wParam, 16)
    $iID = BitAND($wParam, 0x0000FFFF)

    Switch $iCode
        Case $EN_UPDATE ; 0x400 ;
            If StringLen(GUICtrlRead($iID)) = $iChar_Limit Then
                GUICtrlSetState($iID + 1, $GUI_ENABLE)
                GUICtrlSetState($iID + 1, $GUI_FOCUS)
            EndIf
    EndSwitch

EndFunc   ;==>On_WM_COMMAND

Please ask if you have any questions. :)

M23

1 person likes this

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Thank you both for the fast response,

PlayHD that was exact what i needed for my script :) thank you

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • badcoder123
      By badcoder123
      Anyone know how to access the information circled in the photo?
       

    • StudioMaker
      By StudioMaker
      Hey anyone knows how i can have a inputbox that is connected to an HotKeySet? Like if u put in like "a" in the inputbox it sets the hotkey to "a"?
       
    • dascondor
      By dascondor
      So I having issues with this GUI/Listview. My main GUI works like it needs to but the ListView GUIs don't. The exit buttons do not work on them and om have a hard time getting them to work. And I'm trying to make the  listview GUI resizeable. But I'm not sure how to fix either of these issues any thoughts.
      #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <File.au3> #include <ScreenCapture.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <GuiListView.au3> #include <GuiImageList.au3> #include <ListviewConstants.au3> #include 'MultiPing.au3' Opt("GUIOnEventMode", 1) #Region ;Declares ; Reads text file for the base list of IP's Global $aBase_IPlist = _FileReadToArray_mod(".\IP_List.txt") Global $replace2 = "Second" Global $replace3 = "Thrid" ;Global $userdata1 = GUICtrlRead($data1) ;Global $userdata2 = GUICtrlRead($data2) Global $savefolder = "C:\Users\" Global $paths = "\Desktop\PingChecks" Global $1stpaths = "\~~~Store" Global $2ndpaths = "~~~" Global $results = FileExists($savefolder & @UserName & $paths) ;Global $foldercheck = FileExists($savefolder & @UserName & $paths & $1stpaths & $userdata1 & $userdata2 & $2ndpaths) ;Global $savefile = "C:\Users\" & @UserName & "\Desktop\PingChecks\~~~Store" & $userdata1 & $userdata2 & "~~~\" #EndRegion ;Declares #Region ### START Koda GUI section ### Form= $IPMonkey = GUICreate("IP Monkey", 573, 254, -1, -1) GUISetIcon("C:\Users\Dlex\Pictures\monkeyicon.ico", -1) GUISetFont(16, 800, 0, "Arial") GUISetBkColor(0xFFFFFF) GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_MINIMIZE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_MAXIMIZE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_RESTORE, "SpecialEvents") $data1 = GUICtrlCreateInput("1", 184, 120, 89, 32, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER)) GUICtrlSetColor(-1, 0x000000) $data2 = GUICtrlCreateInput("23", 280, 120, 89, 32, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER)) GUICtrlSetColor(-1, 0x000000) $GOButton = GUICtrlCreateButton("GO", 80, 192, 75, 25) GUICtrlSetFont(-1, 10, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0x00FF00) GUICtrlSetTip(-1, "Runs A Live Continuous Ping" & @CRLF & _ "Until Told Other Wise") GUICtrlSetOnEvent(-1, "GOButtonClick") $quickscan = GUICtrlCreateButton("Quick Scan", 224, 192, 107, 25) GUICtrlSetFont(-1, 12, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFFFF00) GUICtrlSetOnEvent(-1, "quickscanClick") GUICtrlSetTip(-1, "Quickly Scans, Then Saves" & @CRLF & _ "Results In Your 'PingChecks' " & @CRLF & _ "Folder Under Your Store Number Folder") Global $exitbutton = GUICtrlCreateButton("Exit", 416, 192, 75, 25) GUICtrlSetFont(-1, 12, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetTip(-1, "What Do You Think This Button Does?") GUICtrlSetOnEvent(-1, "exitbuttonClick") $titlebar = GUICtrlCreateLabel("IP Monkey", 16, 120, 107, 28) GUICtrlSetColor(-1, 0x000000) $Pic1 = GUICtrlCreatePic("C:\Users\Dlex\Pictures\monkeyicon-0.jpg", 16, 16, 100, 100) GUICtrlSetOnEvent(-1, "Pic1Click") $infobutton = GUICtrlCreateButton("?", 536, 8, 27, 25) GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFF8000) GUICtrlSetTip(-1, "Unsure what to do?" & @CRLF & _ "This will get give you " & @CRLF & _ "the help for IP Monkey") GUICtrlSetOnEvent(-1, "infobuttonClick") $Whatstorelabel = GUICtrlCreateLabel("What Store?", 208, 56, 130, 28) GUICtrlSetColor(-1, 0x000000) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### #Region ;ping gui ; ------ pinger GUI ------------------- Global $StopPing = 0 Local $Win_X = 1200, $Win_Y = 880 ; dimension of window Global $PingGui = GUICreate("IP Monkey", $Win_X, $Win_Y, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents") Global $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40) GUICtrlSetFont(-1, 8) $button1 = GUICtrlCreateLabel("Hit Exit To Quit", 10, $Win_Y - 25, $Win_X - 20, 20, -1,$ES_CENTER) GUICtrlSetFont(-1, 10, 800) GUICtrlSetTip(-1, "exit") GUICtrlSetOnEvent(-1, 'SpecialEvents') GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP) GUISetState(@SW_HIDE) ; hidden at startup ; --------- end of pinger gui ------------- #EndRegion ;ping gui ; Generate colored square images $hImage = _GUIImageList_Create(30, 30) _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green _GUICtrlListView_SetImageList($listview, $hImage, 0) While 1 Sleep(100) WEnd Func exitbuttonClick() MsgBox(0,'0','0') Exit EndFunc ;==>exitbuttonClick Func GOButtonClick() $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) ; pass the wanted new octet replace_And_Go($userdata1, $userdata2) ; generate a list of new IP and Go EndFunc ;==>GOButtonClick Func infobuttonClick() EndFunc ;==>infobuttonClick Func Pic1Click() EndFunc ;==>Pic1Click Func quickscanClick() $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) replace_And_Go2($userdata1, $userdata2) EndFunc ;==>quickscanClick Func SpecialEvents() Select Case @GUI_CtrlId = $GUI_EVENT_CLOSE _button1() Case @GUI_CtrlId = $GUI_EVENT_MINIMIZE Case @GUI_CtrlId = $GUI_EVENT_RESTORE Case @GUI_CtrlId = $GUI_EVENT_MAXIMIZE EndSelect EndFunc ;==>SpecialEvents #Region ; Main_GO/Replace_and_GO #cs ############################## second script ############################################# ; this is to ping continuously a list of IP addresses, get and display ping result "live" ; it simulates the dos "ping -t" command but performed simultaneously on many IP ; presenting the results in a ListView highlighting not responding devices with a red box #ce Func replace_And_Go($s_2, $s_3) ; Create a new array wit a new list of IP according to passed second and third octet Local $aNew_IPlist = $aBase_IPlist For $i = 0 To UBound($aNew_IPlist) - 1 $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3) Next GUISetState(@SW_HIDE, $IPMonkey) GUISetState(@SW_SHOW, $PingGui) ; pass the new list to the pinger Main_GO($aNew_IPlist) GUISetState(@SW_HIDE, $PingGui) GUISetState(@SW_SHOW, $IPMonkey) EndFunc ;==>replace_And_Go Func Main_GO($IPlist) HotKeySet("{esc}", "exitbuttonClick") $StopPing = 0 ; $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's ; ; the above command, it loads in the $IPlist array the values contained in the file IP_List.txt ; values in the file should be separated by a semicolon, something like in the following example: ; ; hostname1;192.168.0.1 ; hostname2;192.168.0.5 ; hostnameX;10.59.7.200 ; etc.... ; ; if values in the file are not separated by a semicolon, but another char is used, for example a comma, ; then just pass it as second parameter of the function: $IPlist = _FileReadToArray_mod(".\IP_List.txt", ",") ; _GUICtrlListView_BeginUpdate($listview) _GUICtrlListView_DeleteAllItems($listview) _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView _GUICtrlListView_EndUpdate($listview) While Not $StopPing ; 1 ; continuously ping addresses of the previously loaded file (IP_List.txt) Sleep(10) ; ; $IPlist is the array loaded with all the IP to be pinged (a 2d array in this case) ; | ; | 1 means the IP are in the second column of the $IPlist array (first colun is nr. 0) ; | | ; | | +--> 0 means return back an array loaded with results from all pinged addresses (responding and not responding) ; | | | if you use 1 then only responding addresses are loaded in the returned array [default] ; | | | if you use 2 then only NOT responding addresses are loaded in the returned array ; | | | In this case we do not need an array to be returned, we only need to perform all pings and pass results ; | | | directly (on the fly) to the "_refresh" callback function that will refresh the listview ; | | | ; | | | 0 means NO lookup name resolution must be performed ; | | | | ; | | | | +--> this is the callback function to be called for each pinged address each time the ping has finished ; | | | | | (see the MultiPing.au3 file for info on all passed params) ; | | | | | 6 parameters are passed to this function, but only 2 are used by the called function in this case: ; | | | | | [4] roundtrip of the responding ping or -1 if IP is down ; | | | | | [5] Index (position) of this IP within the caller's passed array ; | | | | | ; v v v v v _nPing($IPlist, 1, 0, 0, "_refresh") WEnd EndFunc ;==>Main_GO #EndRegion ; Main_GO/Replace_and_GO #Region ; QuickScan/Replace_and_GO2 Func replace_And_Go2($s_2, $s_3) ; Create a new array wit a new list of IP according to passed second and third octet Local $aNew_IPlist = $aBase_IPlist For $i = 0 To UBound($aNew_IPlist) - 1 $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3) Next GUISetState(@SW_HIDE, $IPMonkey) GUISetState(@SW_SHOW, $PingGui) ; pass the new list to the pinger QuickRun($aNew_IPlist) GUISetState(@SW_HIDE, $PingGui) GUISetState(@SW_SHOW, $IPMonkey) EndFunc ;==>replace_And_Go2 Func QuickRun($IPlist) $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) HotKeySet("{esc}", "_button1") Local $Win_X = 1200, $Win_Y = 880 ; dimension of window $PingGui = GUICreate("IP Monkey" & "~~~" & @UserName & "~~~" & "Store" & $userdata1 & $userdata2 & "~~~" & @MON & "." & @MDAY & "." & @YEAR & "~~~" & @HOUR & "." & @MIN, $Win_X, $Win_Y, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui) $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40) GUICtrlSetFont(-1, 8) GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP) ; Generate colored square images $hImage = _GUIImageList_Create(30, 30) _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green _GUICtrlListView_SetImageList($listview, $hImage, 0) $button1 = GUICtrlCreateButton("Exit", 10, $Win_Y - 25, $Win_X - 20, 20) GUICtrlSetTip(-1, "End of program") GUICtrlSetOnEvent(-1, "exitbuttonClick") GUISetState(@SW_SHOW) ;~ $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's _GUICtrlListView_BeginUpdate($listview) _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView _GUICtrlListView_EndUpdate($listview) ;While 1 ; perform Pings and update ListView by the "_refresh" callback function $aFinalResult = _nPing($IPlist, 1, 0, 0, "_refresh") ;~ _ArrayDisplay($aFinalResult) ;DirCheck() EndFunc ;==>QuickRun #EndRegion ; QuickScan/Replace_and_GO2 #Region ; Misc Funcs (network) Func _refresh($Params) ; this receive ping results and displays them in the ListView _GUICtrlListView_SetItemImage($listview, $Params[5], 0) ; set colour to Yellow Sleep(50) ; a little wait If $Params[4] = -1 Then ; Device not responding to ping _GUICtrlListView_SetItemImage($listview, $Params[5], 1) ; set colour to RED _GUICtrlListView_EnsureVisible($listview, $Params[5]) ; Position view to this item Else ; Device responds to ping _GUICtrlListView_SetItemImage($listview, $Params[5], 2) ; set colour to GREEN EndIf EndFunc ;==>_refresh Func _button1() ; Button 1 clicked ;~ $StopPing = 1 Exit EndFunc ;==>_button1 #EndRegion ; Misc Funcs (network)  
      MultiPing.au3
      IP_List.txt
    • akira2891
      By akira2891
      Hi,
      I was wondering is this all inputs can be done in 1 box with 3 fields and not to use another gui.
      And how can i validate data for example if i don't enter username he prompt me a message box all time until field is empty.
      I try like this but it give me a msgbox and continue on another field.
      $username = InputBox("Add new user", "Username", "", "", 200, 130, Default, Default, 0) if $username <> " " then msgbox(0, "", "Please enter username") endif $email = InputBox("Add new user", "Email", "", "", 200, 130, Default, Default, 0) $password = InputBox("Add new user", "Password", "", "*", 200, 130, Default, Default, 0)  
    • ur
      By ur
      Whenever we try to access a network share it will prompt for credentials based on the shared folder settings.
      Like the below prompt


      Once you save them, they are saved in Windows Credentials of Credentials Manager in Control panel (run --> control keymgr.dll).

       
      But not able to found exact file or registry for this setting.
       
      So, can anyone suggest how to do this process of adding network credentials using AutoIT.