Jump to content
Sign in to follow this  
bobsyuruncle

Passing values from 2d array into another function

Recommended Posts

For some reason what seems like a simple function has gone over my head as to why this doesn't work, so there must be some simple concept here I'm completely missing.

I have a 2d array full of values from a csv file and I know that row 1,2 has nothing important, but column 3 has all the classes from the CSV

So $twoDarray[3][*one through six] =
1. Name
2. Location
3. host
..etc
So I should be able to pass all rows of column 3 by strconvert($twoDarray[3]).
I've searched the forums but I could not find the solution to this probably simple problem.

Dim $oneDarray
$oneDarray=StringSplit($Rawfile, @CRLF, 1)
$columnsCounter = stringsplit($oneDarray[2],",")
Dim $twoDarray[$oneDarray[0] + 1][$columnsCounter[0] + 1]
For $x = 1 to ($oneDarray[0])
$oneRow = stringsplit($oneDarray[$x],",")
For $y = 1 to ($oneRow[0])
$twoDarray[$x][$y] = $oneRow[$y]
Next
Next 

strconvert($classes,$twoDarray[3])

Log Output
Array variable has incorrect number of subscripts or subscript dimension range exceeded.:
strconvert($classes,$twoDarray[3])
strconvert($classes,^ ERROR

Thanks,

Bob

Share this post


Link to post
Share on other sites

First, what is "strconvert"?

Second, you cannot pass a part of an array to a function, unless it's its full location ($twoDarray[y][x])

You can however pass the whole array to a function, where you can loop through the needed parts and process them.


AutoIt Absolute Beginners    Require a serial    Pause Script    Video Tutorials by Morthawt   ipify 

Monkey's are, like, natures humans.

Share this post


Link to post
Share on other sites

strconvert is just my next function where I begin to step through the strings and parse the values I'm looking for, but is irrelevant to this topic just because the topic is really dealing with 'like you confirmed' passing part of an array into a function.  So thank you for clearing that up.

This question is resolved for me, thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By roeselpi
      hello again,
      it has been a long time since i have been here and a long time since i last used autoit. ever so often when the time allows me to, then i follow up on an idea that i had a long time ago. i have done all the work on paper but now it is up to writing it in autoit and i keep stumbling over many little issues here and there. sometimes after a few days i will try again and get a step further but sometimes it just will not help no matter how long i try and think about a solution. for most of you it will be the basics but for me it is not all that easy, but at least i give it a try.
      right, down to business:
      here is my code:
      #include <MsgBoxConstants.au3> #include <StringConstants.au3> #include <Array.au3> #include <String.au3> ; ; PART 1: define replacements and check with msgbox ; Global $y, $z $y = "Yes" $z = "No" MsgBox(0,"replacements", $y & @CRLF & $z) ;the replacements in a message box ; ; PART 2: set the texts and check via console and msgbox ; Global $my1string = "abab" ;the first specified text MsgBox(0,"my1string", $my1string) ;the message box to output the first specified text Global $my2string = "icic" ;the second specified text MsgBox(0,"my2string", $my2string) ;the message box to output the second specified text ; ; PART 3: transform the strings to individual arrays ; $my1array = StringSplit($my1string, "") $my1array[0] = "" _ArrayDelete($my1array, 0) _ArrayDisplay($my1array, "my1array") ;the display of the first specified array $my2array = StringSplit($my2string, "") $my2array[0] = "" _ArrayDelete($my2array, 0) _ArrayDisplay($my2array, "my2array") ;the display of the first specified array ; ; PART 4: create an empty array for filling ; Global $OutputArray[4] $OutputArray[0] = "" _ArrayDisplay($OutputArray, "OutputArray") ;the display of the first specified array ; ; PART 5: compare & fill empty OutputArray with data after evaluation ; Global $i, $j, $k For $i = 0 to UBound($my1array) -1 For $j = 0 to UBound($my2array) -1 For $k = 0 to UBound($OutputArray) -1 If $my1array[$i] = "a" And $my2array[$j] = "i" Then $OutputArray[$k] = $y Else $OutputArray[$k] = $z EndIf Next Next Next _ArrayDisplay($OutputArray, "OutputArray") ;the display of the Newly filled Array In "Part 2" i make a string that is converted to an array in "Part 3" ... Now, I know that "a" and "i" are always in the exact same spot in both arrays and so i wanted to compare this and make a further array to document my findings by saying "yes" or "no" ... however my new array keeps saying just "no" allthough i can clearly see and know that it should say:
      yes no yes no my guess is that there is something wrong within my for-loops and that the counting is somehow "off" i guess that when the first for-loop is finished it reaches the second whilst the second for-loop is checking the first which would explain why it always says "no" instead of seeing the obvious.
      so my question would be: what is wrong with my for-loop? or where am i making an error that ultimately gives me the wrong results?
      help is much appreciated.
      kind regards
      roeselpi
       
       
      PS: sorry for my not so great english spelling ... stupid german sitting here trying out intermediate english skills.
    • By Jangal
      Hello friends
      This app is slow
      How to increase its speed?
       
      #include <Array.au3> #include <StringConstants.au3> #include <File.au3> #include <String.au3> Global $aWord[][2]  = [[1, "google"],[2,"hello"]]


        Global $sFileName = @ScriptDir & "\1.txt" ; 2MB Text File Local $sFileRead = FileRead($sFileName) Local $res = StringRegExp($sFileRead, "(*UCP)\b[\pL\d]{2,}", 3) _ArrayDisplay($res)   for $sWord in $res     $iIndex = _ArraySearch($aWord, $sWord, 0, 0, 0, 0, 1, 2)     ;MsgBox(0,0,$iIndex)     if $iIndex == -1 Then         Local $aFill = [[0,$sWord]]         _ArrayAdd($aWord,$aFill)        ;      Else         $aWord[$iIndex][0] +=1     EndIf   Next _ArrayDisplay($aWord)

      1.txt
    • By Dan_555
      Hi, here are few functions for the ListBox.
      I have searched the forum, but most of the functions are for listview, so i took one example code from melba23 (clear selection) and
      wrote few more functions. (Because my current project needs them).
       
      These functions work only on a Multi-selection ListBox . 
      Edit: Only 1 function does not work with single selection box.
      The functions do: Clear Selection, Delete Selected items, Invert Selection, Move selected items up and down.
       The example code has 2 Listboxes. The selected items on the left ListBox can be moved up and down. The right Listbox has buttons for the other functions.
      #include <GUIConstantsEx.au3> #include <GuiListBox.au3> #include <WindowsConstants.au3> #include <Array.au3> Local $singlesel = 0, $iMsgBoxAnswer = 0 ;MsgBox features: Title=Yes, Text=Yes, Buttons=Yes and No, Icon=Question, Modality=Task Modal $iMsgBoxAnswer = MsgBox(8228, "Choose Listbox selecton type", "Yes for single, No for multi selection box") If $iMsgBoxAnswer = 6 Then $singlesel = 1 ;Yes Local $BL_1,$BL_2,$BR_1,$BR_2,$BR_3,$BR_4,$BR_5,$BR_6 Global $hForm1 = GUICreate("Listbox test", 349, 287) $LB_1 = GUICtrlCreateList("", 6, 40, 157, 244, BitOR($LBS_NOTIFY, $LBS_MULTIPLESEL, $WS_HSCROLL, $WS_VSCROLL, $LBS_DISABLENOSCROLL)) If $singlesel = 1 Then $LB_2 = GUICtrlCreateList("", 179, 40, 157, 244, BitOR($LBS_NOTIFY, $WS_HSCROLL, $WS_VSCROLL, $LBS_DISABLENOSCROLL)) Else $LB_2 = GUICtrlCreateList("", 179, 40, 157, 244, BitOR($LBS_NOTIFY, $LBS_MULTIPLESEL, $WS_HSCROLL, $WS_VSCROLL, $LBS_DISABLENOSCROLL)) $BR_3 = GUICtrlCreateButton("Reverse Sel", 272, 22, 68, 17) EndIf $BL_1 = GUICtrlCreateButton("Up", 20, 3, 35, 18) $BL_2 = GUICtrlCreateButton("Down", 60, 3, 35, 18) $BR_1 = GUICtrlCreateButton("Up", 200, 3, 35, 18) $BR_2 = GUICtrlCreateButton("Down", 240, 3, 35, 18) $BR_4 = GUICtrlCreateButton("Clear Sel", 217, 22, 52, 17) $BR_5 = GUICtrlCreateButton("Delete", 175, 22, 40, 17) $BR_6 = GUICtrlCreateButton("Populate", 290, 3, 50, 18) GUISetState(@SW_SHOW) For $x = 0 To 50 If $x <= 10 Then GUICtrlSetData($LB_1, $x & " test", 0) GUICtrlSetData($LB_2, $x & " Test", 0) Next While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $BL_1 $a = Listbox_ItemMoveUD($LB_1, -1) If $a > -1 Then WinSetTitle($hForm1, "", "Moved items: " & $a) Case $BL_2 $a = Listbox_ItemMoveUD($LB_1, 1) If $a > -1 Then WinSetTitle($hForm1, "", "Moved items: " & $a) Case $BR_1 Listbox_ItemMoveUD($LB_2, -1) Case $BR_2 Listbox_ItemMoveUD($LB_2, 1) Case $BR_3 Listbox_ReverseSelection($LB_2) Case $BR_4 Listbox_ClearSelection($LB_2) Case $BR_5 Listbox_DeleteSelectedItems($LB_2) Case $BR_6 ;Populate GUICtrlSetData($LB_2, "") ; Clears the listbox For $x = 0 To 50 GUICtrlSetData($LB_2, $x & " Test", 0) Next EndSwitch WEnd ;note $hLB_ID - is the Listbox id Func Listbox_DeleteSelectedItems($hLB_ID) Local $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) ;Get selected items Local $i, $slb = 0, $y, $x If $aSel[0] = 0 Then ;If the array is empty, there is no selection, or it is a single selection listbox For $x = 0 To _GUICtrlListBox_GetCount($hLB_ID) - 1 $y = _GUICtrlListBox_GetSel($hLB_ID, $x) If $y = True Then $slb = 1 _GUICtrlListBox_DeleteString($hLB_ID, $x) ;Perform a delete on single sel. LB ExitLoop EndIf Next EndIf If $slb = 0 Then _GUICtrlListBox_BeginUpdate($hLB_ID) For $i = $aSel[0] To 1 Step -1 ;Loop backwards and delete the selected items _GUICtrlListBox_DeleteString($hLB_ID, $aSel[$i]) Next _GUICtrlListBox_EndUpdate($hLB_ID) EndIf EndFunc ;==>Listbox_DeleteSelectedItems Func Listbox_ClearSelection($hLB_ID) ;Removes the selection from multi and single selection ListBox Local $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) ;Code from Melba23 - Autoit Forum Local $slb, $x, $y If $aSel[0] = 0 Then _GUICtrlListBox_SetCurSel($hLB_ID, -1) $slb = 1 EndIf If $slb = 0 Then _GUICtrlListBox_BeginUpdate($hLB_ID) For $i = 1 To $aSel[0] _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i], False) Next _GUICtrlListBox_EndUpdate($hLB_ID) EndIf EndFunc ;==>Listbox_ClearSelection Func Listbox_ReverseSelection($hLB_ID) ;Logically, this function works only on multi-selection listboxes Local $i Local $aCou = _GUICtrlListBox_GetCount($hLB_ID) Local $cSel = _GUICtrlListBox_GetCaretIndex($hLB_ID) ;Save the caret _GUICtrlListBox_BeginUpdate($hLB_ID) For $i = 0 To $aCou _GUICtrlListBox_SetSel($hLB_ID, $i, Not (_GUICtrlListBox_GetSel($hLB_ID, $i))) Next _GUICtrlListBox_SetCaretIndex($hLB_ID, $cSel) ;Restore the caret _GUICtrlListBox_EndUpdate($hLB_ID) EndFunc ;==>Listbox_ReverseSelection Func Listbox_ItemMoveUD($hLB_ID, $iDir = -1) ;Listbox_ItemMoveUD - Up/Down Move Multi/Single item in a ListBox ;$iDir: -1 up, 1 down ;Return values -1 nothing to do, 0 nothing moved, >0 performed moves Local $iCur, $iNxt, $aCou, $aSel, $i, $m = 0, $y, $slb = 0 ;Current, next, Count, Selection, loop , movecount $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) ;Put selected items in an array $aCou = _GUICtrlListBox_GetCount($hLB_ID) ;Get total item count of the listbox If $aSel[0] = 0 Then $y = _GUICtrlListBox_GetCurSel($hLB_ID) If $y > -1 Then _ArrayAdd($aSel, $y) $aSel[0] = 1 $slb = 1 EndIf EndIf ;WinSetTitle($hGUI, "", $aSel[0]) ;Debugging info Select Case $iDir = -1 ;Move Up For $i = 1 To $aSel[0] If $aSel[$i] > 0 Then $iNxt = _GUICtrlListBox_GetText($hLB_ID, $aSel[$i] - 1) ;Save the selection index - 1 text _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i] - 1, _GUICtrlListBox_GetText($hLB_ID, $aSel[$i])) ;Replace the index-1 text with the index text _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i], $iNxt) ;Replace the selection with the saved var $m = $m + 1 EndIf Next For $i = 1 To $aSel[0] ;Restore the selections after moving If $aSel[$i] > 0 Then If $slb = 0 Then _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i] - 1, 1) Else _GUICtrlListBox_SetCurSel($hLB_ID, $aSel[$i] - 1) EndIf EndIf Next Return $m Case $iDir = 1 ;Move Down If $aSel[0] > 0 Then For $i = $aSel[0] To 1 Step -1 If $aSel[$i] < $aCou - 1 Then $iNxt = _GUICtrlListBox_GetText($hLB_ID, $aSel[$i] + 1) _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i] + 1, _GUICtrlListBox_GetText($hLB_ID, $aSel[$i])) _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i], $iNxt) $m = $m + 1 EndIf Next EndIf For $i = $aSel[0] To 1 Step -1 ;Restore the selections after moving If $aSel[$i] < $aCou - 1 Then If $slb = 0 Then _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i] + 1, 1) Else _GUICtrlListBox_SetCurSel($hLB_ID, $aSel[$i] + 1) EndIf EndIf Next Return $m EndSelect Return -1 EndFunc ;==>Listbox_ItemMoveUD  
    • By Colduction
      Hi dear friends!, i'm sorry for creating a new thread (a new problem), i have over than 9 lists that i want to combine them to be this (in this example, there are 3 test files):


      I've written a little code for splitting main information, but i really confused how to make results as "Output.txt", here is that code:
       
      $sRegex_1 = StringRegExp(FileRead("1.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) $sRegex_2 = StringRegExp(FileRead("2.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) $sRegex_3 = StringRegExp(FileRead("3.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) For $i = 0 To UBound($sRegex_1) - 1 ConsoleWrite($sRegex_1[$i] & @CRLF) For $j = 0 To UBound($sRegex_2) - 1 ConsoleWrite($sRegex_2[$j] & @CRLF) For $k = 0 To UBound($sRegex_3) - 1 ConsoleWrite($sRegex_3[$k] & @CRLF) Next Next Next  
    • By nacerbaaziz
      hello evrybody
      here is an example about how to split your texts using a delimiter with the ability to select how much of delimiters shows in each colum  with $i_number
      e.g
      you have a long text and you want to split it in an array
      that evry colum have a number (n) of lines
      i made a function that do that for you
      just call it with a three params
      $s_text
      your text
      $i_number
      the number that you want to put in each col
      $s_siparator
      the siparator
      default is "|"
      here is the function with example
      i hope that it will be useful for you
       
      ****
       
      #include <Array.au3> $s_txt = "some text1some text2|some text3|some text4|some text5|some text6" $array = splitText($s_txt, 2) _ArrayDisplay($array) Func splitText($s_text, $i_number, $s_siparator = "|") Local $a_TXT = StringSplit($s_text, $s_siparator) Local $a_Return[$a_TXT[0] + 1] If ($a_TXT[0] <= $i_number) Or ($i_number <= 0) Then ReDim $a_Return[2] $a_Return[0] = 1 $a_Return[1] = $s_text Return $a_Return EndIf Local $i_Processed = 1, $i_arrayProcessed = 1 Do For $i = $i_Processed To ($i_Processed + $i_number) - 1 If ($a_TXT[0] < $i) Then ExitLoop If Not ($a_Return[$i_arrayProcessed]) Then $a_Return[$i_arrayProcessed] = $a_TXT[$i] Else $a_Return[$i_arrayProcessed] &= $s_siparator & $a_TXT[$i] EndIf $i_Processed += 1 Next $i_arrayProcessed += 1 Until ($a_TXT[0] < $i_Processed) ReDim $a_Return[$i_arrayProcessed] $a_Return[0] = $i_arrayProcessed - 1 Return $a_Return EndFunc ;==>splitText
      accept my greetings
      thanks to
      @Dan_555
      for his notes
       
×
×
  • Create New...