Sign in to follow this  
Followers 0
Flum

Need help to update a dialog list

6 posts in this topic

Could anyone tell me the best way to sort my champion list as soon as i move one from the right list to the left list. At this point i tried to work with the array.au3 without succes. Here is my code.

Global $sbselectform, $sbtargetlist, $sbtemplist1, $sbtemplist2 = "", $sbtemplist3, $sbtemplist2r, $sbaddbtn, $sbrembtn, $sbresetbtn, $sbokbtn, $sbmsg, $sbsourcelist, $sbsourcelistr, $sbchamplabel, $sbbanlabel

$sbsourcelist = 'Aatrox|Ahri|Akali|Alistar|Amumu|Anivia|Annie|Ashe|Blitzcrank|Brand|Caitlyn|Cassiopeia|Cho''Gath|Corki|Darius|Diana|Dr. Mundo|Draven|Elise|Evelynn|Ezreal|Fiddlesticks|Fiora|Fizz|Galio|Gangplank|Garen|Gragas|Graves|Hecarim|Heimerdinger|Irelia|Janna|Jarvan IV|Jax|Jayce|Jinx|Karma|Karthus|Kassadin|Katarina|Kayle|Kennen|Kha''Zix|Kog''Maw|LeBlanc|Lee Sin|Leona|Lissandra|Lucian|Lulu|Lux|Malphite|Malzahar|Maokai|Master Yi|Miss Fortune|Mordekaiser|Morgana|Nami|Nasus|Nautilus|Nidalee|Nocturne|Nunu|Olaf|Orianna|Pantheon|Poppy|Quinn|Rammus|Renekton|Rengar|Riven|Rumble|Ryze|Sejuani|Shaco|Shen|Shyvana|Singed|Sion|Sivir|Skarner|Sona|Soraka|Swain|Syndra|Talon|Taric|Teemo|Thresh|Tristana|Trundle|Tryndamere|Twisted Fate|Twitch|Udyr|Urgot|Varus|Vayne|Veigar|Vi|Viktor|Vladimir|Volibear|Warwick|Wukong|Xerath|Xin Zhao|Yasuo|Yorick|Zac|Zed|Ziggs|Zilean|Zyra|'
$sbtemplist2 = IniRead("banlist.ini", "Settings", "banlist", "")
If $sbtemplist2 <> "" Then
;~  dump($sbtemplist2)
    $sbtemplist3 = StringTrimRight($sbtemplist2, 1)
    Local $sbremlist = StringSplit($sbtemplist3, '|')
    For $iCount = 1 To UBound($sbremlist) - 1
        $sbsourcelist = StringReplace($sbsourcelist, $sbremlist[$iCount] & "|", "")
;~      dump($sbremlist[$iCount])
    Next
EndIf
$sbsourcelistr = $sbsourcelist
$sbtemplist2r = $sbtemplist2

$sbselectform = GUICreate("Ban list for Draft/Ranked mode", 335, 275, 227, 154)
$sbchamplabel = GUICtrlCreateLabel("Champion List", 15, 15, 129, 15)
$sbtemplist1 = GUICtrlCreateList("", 15, 32, 129, 227, 0x00200001)
GUICtrlSetData($sbtemplist1, $sbsourcelist)
$sbaddbtn = GUICtrlCreateButton(">>", 152, 40, 25, 25, 0)
$sbrembtn = GUICtrlCreateButton("<<", 152, 70, 25, 25, 0)
;~ $sbresetbtn = GUICtrlCreateButton("C", 152, 189, 25, 25, 0)
$sbokbtn = GUICtrlCreateButton("Ok", 152, 219, 25, 25, 0)
$sbbanlabel = GUICtrlCreateLabel("Ban List", 185, 15, 129, 15)
$sbtargetlist = GUICtrlCreateList("", 185, 32, 129, 227, 0x00200001)
GUICtrlSetData($sbtargetlist, $sbtemplist2)
GUICtrlSetState($sbokbtn, 256)
GUISetState(@SW_SHOW)
While 1
    $sbmsg = GUIGetMsg()
    Select
        Case $sbmsg = $sbaddbtn
            If GUICtrlRead($sbtemplist1) == "" Then
                MsgBox(0, "", "select from left list before adding...")
            Else
                If (UBound(StringSplit($sbtemplist2, '|')) - 1) <= 9 Then
                    $sbtemplist2 &= GUICtrlRead($sbtemplist1) & "|"
                    $sbsourcelist = sbmove($sbtemplist1, $sbtargetlist, $sbsourcelist, GUICtrlRead($sbtemplist1))
                Else
                    MsgBox(0, "", "max 9")
                EndIf
            EndIf
        Case $sbmsg = $sbrembtn
            If GUICtrlRead($sbtargetlist) == "" Then
                MsgBox(0, "", "select from right list before removing...")
            Else
                $sbsourcelist = $sbsourcelist & GUICtrlRead($sbtargetlist) & "|"
;~              Local $sbremlist = StringSplit($sbsourcelist, '|')
;~              _ArraySort($sbremlist)
;~              $sbsourcelist = ""
;~              For $iCount = 1 To UBound($sbremlist) - 1
;~                  $sbsourcelist &= $sbremlist[$iCount] & "|"
;~              Next



                $sbtemplist2 = sbmove($sbtargetlist, $sbtemplist1, $sbtemplist2, GUICtrlRead($sbtargetlist))
            EndIf
;~      Case $sbmsg = $sbresetbtn
;~          GUICtrlDelete($sbtemplist1)
;~          GUICtrlDelete($sbtargetlist)
;~          $sbtemplist1 = GUICtrlCreateList("", 15, 32, 129, 227, 0x00200001)
;~          GUICtrlSetData($sbtemplist1, $sbsourcelistr)
;~          $sbtargetlist = GUICtrlCreateList("", 185, 32, 129, 227, 0x00200001)
;~          GUICtrlSetData($sbtargetlist, $sbtemplist2r)
        Case $sbmsg = $sbokbtn
            IniWrite("banlist.ini", "Settings", "banlist", $sbtemplist2)


;~          MsgBox(64, "boob", $sbtargetlist)
            ExitLoop
        Case $sbmsg = -3
            ExitLoop
        Case Else
    EndSelect
WEnd

Func sbmove($sbmove1, $sbmove2, $sbmove3, $sbmove4)
    Local $sbmove5 = StringSplit($sbmove3, '|'), $sbmove6 = ''
    For $iCount = 1 To UBound($sbmove5) - 1
        If $sbmove5[$iCount] <> $sbmove4 And $sbmove5[$iCount] <> '' Then
            $sbmove6 &= $sbmove5[$iCount] & '|'
        EndIf
    Next
    GUICtrlSetData($sbmove1, '')
    GUICtrlSetData($sbmove1, $sbmove6)
    GUICtrlSetData($sbmove2, $sbmove4)
    Return $sbmove6
EndFunc   ;==>sbmove

Func dump($a)
    MsgBox(0, "", $a)
EndFunc   ;==>dump


Func _ArraySort(ByRef $avArray, $iDescending = 0, $iStart = 0, $iEnd = 0, $iSubItem = 0)
    If Not IsArray($avArray) Then Return SetError(1, 0, 0)
    Local $iUBound = UBound($avArray) - 1
    If $iEnd < 1 Or $iEnd > $iUBound Then $iEnd = $iUBound
    If $iStart < 0 Then $iStart = 0
    If $iStart > $iEnd Then Return SetError(2, 0, 0)
    Switch UBound($avArray, 0)
        Case 1
            __ArrayQuickSort1D($avArray, $iStart, $iEnd)
            If $iDescending Then _ArrayReverse($avArray, $iStart, $iEnd)
        Case 2
            Local $iSubMax = UBound($avArray, 2) - 1
            If $iSubItem > $iSubMax Then Return SetError(3, 0, 0)
            If $iDescending Then
                $iDescending = -1
            Else
                $iDescending = 1
            EndIf
            __ArrayQuickSort2D($avArray, $iDescending, $iStart, $iEnd, $iSubItem, $iSubMax)
        Case Else
            Return SetError(4, 0, 0)
    EndSwitch
    Return 1
EndFunc   ;==>_ArraySort

Func _ArrayReverse(ByRef $avArray, $iStart = 0, $iEnd = 0)
    If Not IsArray($avArray) Then Return SetError(1, 0, 0)
    If UBound($avArray, 0) <> 1 Then Return SetError(3, 0, 0)
    Local $vTmp, $iUBound = UBound($avArray) - 1
    If $iEnd < 1 Or $iEnd > $iUBound Then $iEnd = $iUBound
    If $iStart < 0 Then $iStart = 0
    If $iStart > $iEnd Then Return SetError(2, 0, 0)
    For $i = $iStart To Int(($iStart + $iEnd - 1) / 2)
        $vTmp = $avArray[$i]
        $avArray[$i] = $avArray[$iEnd]
        $avArray[$iEnd] = $vTmp
        $iEnd -= 1
    Next
    Return 1
EndFunc   ;==>_ArrayReverse

Func __ArrayQuickSort1D(ByRef $avArray, ByRef $iStart, ByRef $iEnd)
    If $iEnd <= $iStart Then Return
    Local $vTmp
    If ($iEnd - $iStart) < 15 Then
        Local $vCur
        For $i = $iStart + 1 To $iEnd
            $vTmp = $avArray[$i]
            If IsNumber($vTmp) Then
                For $j = $i - 1 To $iStart Step -1
                    $vCur = $avArray[$j]
                    If ($vTmp >= $vCur And IsNumber($vCur)) Or (Not IsNumber($vCur) And StringCompare($vTmp, $vCur) >= 0) Then ExitLoop
                    $avArray[$j + 1] = $vCur
                Next
            Else
                For $j = $i - 1 To $iStart Step -1
                    If (StringCompare($vTmp, $avArray[$j]) >= 0) Then ExitLoop
                    $avArray[$j + 1] = $avArray[$j]
                Next
            EndIf
            $avArray[$j + 1] = $vTmp
        Next
        Return
    EndIf
    Local $L = $iStart, $R = $iEnd, $vPivot = $avArray[Int(($iStart + $iEnd) / 2)], $fNum = IsNumber($vPivot)
    Do
        If $fNum Then
            While ($avArray[$L] < $vPivot And IsNumber($avArray[$L])) Or (Not IsNumber($avArray[$L]) And StringCompare($avArray[$L], $vPivot) < 0)
                $L += 1
            WEnd
            While ($avArray[$R] > $vPivot And IsNumber($avArray[$R])) Or (Not IsNumber($avArray[$R]) And StringCompare($avArray[$R], $vPivot) > 0)
                $R -= 1
            WEnd
        Else
            While (StringCompare($avArray[$L], $vPivot) < 0)
                $L += 1
            WEnd
            While (StringCompare($avArray[$R], $vPivot) > 0)
                $R -= 1
            WEnd
        EndIf
        If $L <= $R Then
            $vTmp = $avArray[$L]
            $avArray[$L] = $avArray[$R]
            $avArray[$R] = $vTmp
            $L += 1
            $R -= 1
        EndIf
    Until $L > $R
    __ArrayQuickSort1D($avArray, $iStart, $R)
    __ArrayQuickSort1D($avArray, $L, $iEnd)
EndFunc   ;==>__ArrayQuickSort1D

Func __ArrayQuickSort2D(ByRef $avArray, ByRef $iStep, ByRef $iStart, ByRef $iEnd, ByRef $iSubItem, ByRef $iSubMax)
    If $iEnd <= $iStart Then Return
    Local $vTmp, $L = $iStart, $R = $iEnd, $vPivot = $avArray[Int(($iStart + $iEnd) / 2)][$iSubItem], $fNum = IsNumber($vPivot)
    Do
        If $fNum Then
            While ($iStep * ($avArray[$L][$iSubItem] - $vPivot) < 0 And IsNumber($avArray[$L][$iSubItem])) Or (Not IsNumber($avArray[$L][$iSubItem]) And $iStep * StringCompare($avArray[$L][$iSubItem], $vPivot) < 0)
                $L += 1
            WEnd
            While ($iStep * ($avArray[$R][$iSubItem] - $vPivot) > 0 And IsNumber($avArray[$R][$iSubItem])) Or (Not IsNumber($avArray[$R][$iSubItem]) And $iStep * StringCompare($avArray[$R][$iSubItem], $vPivot) > 0)
                $R -= 1
            WEnd
        Else
            While ($iStep * StringCompare($avArray[$L][$iSubItem], $vPivot) < 0)
                $L += 1
            WEnd
            While ($iStep * StringCompare($avArray[$R][$iSubItem], $vPivot) > 0)
                $R -= 1
            WEnd
        EndIf
        If $L <= $R Then
            For $i = 0 To $iSubMax
                $vTmp = $avArray[$L][$i]
                $avArray[$L][$i] = $avArray[$R][$i]
                $avArray[$R][$i] = $vTmp
            Next
            $L += 1
            $R -= 1
        EndIf
    Until $L > $R
    __ArrayQuickSort2D($avArray, $iStep, $iStart, $R, $iSubItem, $iSubMax)
    __ArrayQuickSort2D($avArray, $iStep, $L, $iEnd, $iSubItem, $iSubMax)
EndFunc   ;==>__ArrayQuickSort2D

Share this post


Link to post
Share on other sites



Add this to your List creation function: $LBS_SORT, it sorts the list automatically


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

Add this to your List creation function: $LBS_SORT, it sorts the list automatically

 

I did try out the 0x0002 ($LBS_SORT) when creating the list. But i just found out i added it as extended style. Facepalm

Cheers

Share this post


Link to post
Share on other sites

 I wish to add 2 more buttons on it, so people can move one items from the right list up and down in the list itself. What would be the best way to do such a thing?

Share this post


Link to post
Share on other sites

a tiny advice, any script that have a connection with game doesnt allowed here. No offense, just saying before Melba comes here :D

Share this post


Link to post
Share on other sites

Hoping to see a red billed streamertail bird here. Your tiny advice is valuable.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • dascondor
      By dascondor
      So I having issues with this GUI/Listview. My main GUI works like it needs to but the ListView GUIs don't. The exit buttons do not work on them and om have a hard time getting them to work. And I'm trying to make the  listview GUI resizeable. But I'm not sure how to fix either of these issues any thoughts.
      #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <File.au3> #include <ScreenCapture.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <GuiListView.au3> #include <GuiImageList.au3> #include <ListviewConstants.au3> #include 'MultiPing.au3' Opt("GUIOnEventMode", 1) #Region ;Declares ; Reads text file for the base list of IP's Global $aBase_IPlist = _FileReadToArray_mod(".\IP_List.txt") Global $replace2 = "Second" Global $replace3 = "Thrid" ;Global $userdata1 = GUICtrlRead($data1) ;Global $userdata2 = GUICtrlRead($data2) Global $savefolder = "C:\Users\" Global $paths = "\Desktop\PingChecks" Global $1stpaths = "\~~~Store" Global $2ndpaths = "~~~" Global $results = FileExists($savefolder & @UserName & $paths) ;Global $foldercheck = FileExists($savefolder & @UserName & $paths & $1stpaths & $userdata1 & $userdata2 & $2ndpaths) ;Global $savefile = "C:\Users\" & @UserName & "\Desktop\PingChecks\~~~Store" & $userdata1 & $userdata2 & "~~~\" #EndRegion ;Declares #Region ### START Koda GUI section ### Form= $IPMonkey = GUICreate("IP Monkey", 573, 254, -1, -1) GUISetIcon("C:\Users\Dlex\Pictures\monkeyicon.ico", -1) GUISetFont(16, 800, 0, "Arial") GUISetBkColor(0xFFFFFF) GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_MINIMIZE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_MAXIMIZE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_RESTORE, "SpecialEvents") $data1 = GUICtrlCreateInput("1", 184, 120, 89, 32, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER)) GUICtrlSetColor(-1, 0x000000) $data2 = GUICtrlCreateInput("23", 280, 120, 89, 32, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER)) GUICtrlSetColor(-1, 0x000000) $GOButton = GUICtrlCreateButton("GO", 80, 192, 75, 25) GUICtrlSetFont(-1, 10, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0x00FF00) GUICtrlSetTip(-1, "Runs A Live Continuous Ping" & @CRLF & _ "Until Told Other Wise") GUICtrlSetOnEvent(-1, "GOButtonClick") $quickscan = GUICtrlCreateButton("Quick Scan", 224, 192, 107, 25) GUICtrlSetFont(-1, 12, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFFFF00) GUICtrlSetOnEvent(-1, "quickscanClick") GUICtrlSetTip(-1, "Quickly Scans, Then Saves" & @CRLF & _ "Results In Your 'PingChecks' " & @CRLF & _ "Folder Under Your Store Number Folder") Global $exitbutton = GUICtrlCreateButton("Exit", 416, 192, 75, 25) GUICtrlSetFont(-1, 12, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetTip(-1, "What Do You Think This Button Does?") GUICtrlSetOnEvent(-1, "exitbuttonClick") $titlebar = GUICtrlCreateLabel("IP Monkey", 16, 120, 107, 28) GUICtrlSetColor(-1, 0x000000) $Pic1 = GUICtrlCreatePic("C:\Users\Dlex\Pictures\monkeyicon-0.jpg", 16, 16, 100, 100) GUICtrlSetOnEvent(-1, "Pic1Click") $infobutton = GUICtrlCreateButton("?", 536, 8, 27, 25) GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFF8000) GUICtrlSetTip(-1, "Unsure what to do?" & @CRLF & _ "This will get give you " & @CRLF & _ "the help for IP Monkey") GUICtrlSetOnEvent(-1, "infobuttonClick") $Whatstorelabel = GUICtrlCreateLabel("What Store?", 208, 56, 130, 28) GUICtrlSetColor(-1, 0x000000) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### #Region ;ping gui ; ------ pinger GUI ------------------- Global $StopPing = 0 Local $Win_X = 1200, $Win_Y = 880 ; dimension of window Global $PingGui = GUICreate("IP Monkey", $Win_X, $Win_Y, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents") Global $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40) GUICtrlSetFont(-1, 8) $button1 = GUICtrlCreateLabel("Hit Exit To Quit", 10, $Win_Y - 25, $Win_X - 20, 20, -1,$ES_CENTER) GUICtrlSetFont(-1, 10, 800) GUICtrlSetTip(-1, "exit") GUICtrlSetOnEvent(-1, 'SpecialEvents') GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP) GUISetState(@SW_HIDE) ; hidden at startup ; --------- end of pinger gui ------------- #EndRegion ;ping gui ; Generate colored square images $hImage = _GUIImageList_Create(30, 30) _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green _GUICtrlListView_SetImageList($listview, $hImage, 0) While 1 Sleep(100) WEnd Func exitbuttonClick() MsgBox(0,'0','0') Exit EndFunc ;==>exitbuttonClick Func GOButtonClick() $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) ; pass the wanted new octet replace_And_Go($userdata1, $userdata2) ; generate a list of new IP and Go EndFunc ;==>GOButtonClick Func infobuttonClick() EndFunc ;==>infobuttonClick Func Pic1Click() EndFunc ;==>Pic1Click Func quickscanClick() $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) replace_And_Go2($userdata1, $userdata2) EndFunc ;==>quickscanClick Func SpecialEvents() Select Case @GUI_CtrlId = $GUI_EVENT_CLOSE _button1() Case @GUI_CtrlId = $GUI_EVENT_MINIMIZE Case @GUI_CtrlId = $GUI_EVENT_RESTORE Case @GUI_CtrlId = $GUI_EVENT_MAXIMIZE EndSelect EndFunc ;==>SpecialEvents #Region ; Main_GO/Replace_and_GO #cs ############################## second script ############################################# ; this is to ping continuously a list of IP addresses, get and display ping result "live" ; it simulates the dos "ping -t" command but performed simultaneously on many IP ; presenting the results in a ListView highlighting not responding devices with a red box #ce Func replace_And_Go($s_2, $s_3) ; Create a new array wit a new list of IP according to passed second and third octet Local $aNew_IPlist = $aBase_IPlist For $i = 0 To UBound($aNew_IPlist) - 1 $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3) Next GUISetState(@SW_HIDE, $IPMonkey) GUISetState(@SW_SHOW, $PingGui) ; pass the new list to the pinger Main_GO($aNew_IPlist) GUISetState(@SW_HIDE, $PingGui) GUISetState(@SW_SHOW, $IPMonkey) EndFunc ;==>replace_And_Go Func Main_GO($IPlist) HotKeySet("{esc}", "exitbuttonClick") $StopPing = 0 ; $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's ; ; the above command, it loads in the $IPlist array the values contained in the file IP_List.txt ; values in the file should be separated by a semicolon, something like in the following example: ; ; hostname1;192.168.0.1 ; hostname2;192.168.0.5 ; hostnameX;10.59.7.200 ; etc.... ; ; if values in the file are not separated by a semicolon, but another char is used, for example a comma, ; then just pass it as second parameter of the function: $IPlist = _FileReadToArray_mod(".\IP_List.txt", ",") ; _GUICtrlListView_BeginUpdate($listview) _GUICtrlListView_DeleteAllItems($listview) _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView _GUICtrlListView_EndUpdate($listview) While Not $StopPing ; 1 ; continuously ping addresses of the previously loaded file (IP_List.txt) Sleep(10) ; ; $IPlist is the array loaded with all the IP to be pinged (a 2d array in this case) ; | ; | 1 means the IP are in the second column of the $IPlist array (first colun is nr. 0) ; | | ; | | +--> 0 means return back an array loaded with results from all pinged addresses (responding and not responding) ; | | | if you use 1 then only responding addresses are loaded in the returned array [default] ; | | | if you use 2 then only NOT responding addresses are loaded in the returned array ; | | | In this case we do not need an array to be returned, we only need to perform all pings and pass results ; | | | directly (on the fly) to the "_refresh" callback function that will refresh the listview ; | | | ; | | | 0 means NO lookup name resolution must be performed ; | | | | ; | | | | +--> this is the callback function to be called for each pinged address each time the ping has finished ; | | | | | (see the MultiPing.au3 file for info on all passed params) ; | | | | | 6 parameters are passed to this function, but only 2 are used by the called function in this case: ; | | | | | [4] roundtrip of the responding ping or -1 if IP is down ; | | | | | [5] Index (position) of this IP within the caller's passed array ; | | | | | ; v v v v v _nPing($IPlist, 1, 0, 0, "_refresh") WEnd EndFunc ;==>Main_GO #EndRegion ; Main_GO/Replace_and_GO #Region ; QuickScan/Replace_and_GO2 Func replace_And_Go2($s_2, $s_3) ; Create a new array wit a new list of IP according to passed second and third octet Local $aNew_IPlist = $aBase_IPlist For $i = 0 To UBound($aNew_IPlist) - 1 $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3) Next GUISetState(@SW_HIDE, $IPMonkey) GUISetState(@SW_SHOW, $PingGui) ; pass the new list to the pinger QuickRun($aNew_IPlist) GUISetState(@SW_HIDE, $PingGui) GUISetState(@SW_SHOW, $IPMonkey) EndFunc ;==>replace_And_Go2 Func QuickRun($IPlist) $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) HotKeySet("{esc}", "_button1") Local $Win_X = 1200, $Win_Y = 880 ; dimension of window $PingGui = GUICreate("IP Monkey" & "~~~" & @UserName & "~~~" & "Store" & $userdata1 & $userdata2 & "~~~" & @MON & "." & @MDAY & "." & @YEAR & "~~~" & @HOUR & "." & @MIN, $Win_X, $Win_Y, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui) $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40) GUICtrlSetFont(-1, 8) GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP) ; Generate colored square images $hImage = _GUIImageList_Create(30, 30) _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green _GUICtrlListView_SetImageList($listview, $hImage, 0) $button1 = GUICtrlCreateButton("Exit", 10, $Win_Y - 25, $Win_X - 20, 20) GUICtrlSetTip(-1, "End of program") GUICtrlSetOnEvent(-1, "exitbuttonClick") GUISetState(@SW_SHOW) ;~ $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's _GUICtrlListView_BeginUpdate($listview) _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView _GUICtrlListView_EndUpdate($listview) ;While 1 ; perform Pings and update ListView by the "_refresh" callback function $aFinalResult = _nPing($IPlist, 1, 0, 0, "_refresh") ;~ _ArrayDisplay($aFinalResult) ;DirCheck() EndFunc ;==>QuickRun #EndRegion ; QuickScan/Replace_and_GO2 #Region ; Misc Funcs (network) Func _refresh($Params) ; this receive ping results and displays them in the ListView _GUICtrlListView_SetItemImage($listview, $Params[5], 0) ; set colour to Yellow Sleep(50) ; a little wait If $Params[4] = -1 Then ; Device not responding to ping _GUICtrlListView_SetItemImage($listview, $Params[5], 1) ; set colour to RED _GUICtrlListView_EnsureVisible($listview, $Params[5]) ; Position view to this item Else ; Device responds to ping _GUICtrlListView_SetItemImage($listview, $Params[5], 2) ; set colour to GREEN EndIf EndFunc ;==>_refresh Func _button1() ; Button 1 clicked ;~ $StopPing = 1 Exit EndFunc ;==>_button1 #EndRegion ; Misc Funcs (network)  
      MultiPing.au3
      IP_List.txt
    • Simpel
      By Simpel
      Hi, I created a gui with date field but formatted as time in HH:mm. It always shows "now-time". Even if I try to set it with GUICtrlSetData.
      #include <DateTimeConstants.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> Example() Func Example() GUICreate("My GUI get date", 200, 200, 800, 200) Local $idDate = GUICtrlCreateDate("", 20, 20, 100, 20, $DTS_TIMEFORMAT) ; to select a specific default format Local $sStyle = "HH:mm" ; Just display hours and minutes <<<<<<<<<<<<<<<<<<<<<<<<<<<< GUICtrlSendMsg($idDate, $DTM_SETFORMATW, 0, $sStyle) ConsoleWrite(GUICtrlRead($idDate) & @CRLF) GUICtrlSetData($idDate, "00:00") ConsoleWrite(GUICtrlRead($idDate) & @CRLF) GUISetState(@SW_SHOW) ; Loop until the user exits. While GUIGetMsg() <> $GUI_EVENT_CLOSE WEnd MsgBox($MB_SYSTEMMODAL, "Time", GUICtrlRead($idDate)) EndFunc ;==>Example How can I set the time field with another time and how can this field be set blank?
      Regards, Conrad
    • hcI
      By hcI
      Hello everyone !
      I was looking for a parameter to set a List. Not a ComboList in ReadOnly.
      I've already found a topic about The readonly on a ComboList :
      But nothing on List
      Does someone know how to ?..
    • nss
      By nss
      Hi all. I am creating an app that runs a program with the admin privileges using the shellexecute's run as verb, but what my problem is, that no matter what I use to launch the program, it doesn't quite work like the run dialog would (certain programs don't get found, etc.). I've tried using the explorer.exe and passing the program to it, that is unreliable and opens documents folder sometimes instead, I've tried using the @comspec /c and that works better, but still some of the programs aren't being found that would be with the run dialog e.g., if I do @comspec /c diskpart it won't find it, I've even tried setting the working dir, but still no luck. I also tried passing commandline params to C:\WINDOWS\system32\rundll32.exe shell32.dll,#61, but no luck. can anyone help me what way to go in order to be able to launch programs in the run dialog style? is there a function in winapi that run dialog uses that I could use as well? Or what would be the best way to go about this? Any help much appreciated.
    • Vivaed
      By Vivaed
      I am trying to read all the files in a folder, then whatever file is newest, keep only that one and delete the rest.
      Example files:  (these all have version numbers embedded in them, I dont want to rely on the file name)
      Faint.exe
      Faint-v2.0.exe
      Faint-v3.0.exe
      Faint-v4.0.exe
       
      What I have so far:
      #include <File.au3> RemoveOldFiles() ConsoleWrite(FileGetVersion("C:\WB Resources\FAINT_DONT_LINK_THESE\Faint-v4.0.0.exe") &@CRLF) Func RemoveOldFiles() Local $aFileList = _FileListToArray("C:\WB Resources\FAINT_DONT_LINK_THESE\", "*.exe",$FLTA_FILES) For $i = 0 To UBound($aFileList) - 1 $aFileVersion = FileGetVersion($aFileList[$i]) ConsoleWrite($aFileList[$i] & @CRLF) ConsoleWrite($aFileVersion & @CRLF) Next EndFunc OUTPUT: >Running:(3.3.14.2):C:\Program Files (x86)\AutoIt3\autoit3_x64.exe "C:\Users\bot\ownCloud\WellBeats\Delete Old Files\delete-test.au3" --> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop 3 0.0.0.0 a.exe 0.0.0.0 b.exe 0.0.0.0 Faint-v4.0.0.exe 0.0.0.0 4.0.0.18 <-- This is the correct file version.... +>07:34:26 AutoIt3.exe ended.rc:0 +>07:34:26 AutoIt3Wrapper Finished. >Exit code: 0 Time: 0.6647 Not sure what I am missing here?
      Thanks!