Jump to content
Sign in to follow this  
grimmlock

Array pipe character used for next line

Recommended Posts

I am making an app that will allow the migration of users from one server to another (while changing permissions) easier for anyone and everyone. Below is my code, what I can't seem to figure out is what I am missing in my code so that the _uArray() reads the folder names in the destination folder and then uses them to set some of the permissions settings.

Right now the array pulls the data just fine, but either puts a "|" between the names (which I understand is "normal") or it removes the "|" and puts the folder names together in one long string, which is why I used StringSplit() only now it does not display anything at all.

If anyone has time, would it be possible for someone to look at this and help me solve this issue. I think it would a great app that anyone can use that, like me, needs to migrate users across domains or servers. Thank you in advance.

 
#include <GUIConstantsEx.au3>
#include <AutoItConstants.au3>
#include <WindowsConstants.au3>
#include <EditConstants.au3>
#include <MsgBoxConstants.au3>
#include <Constants.au3>
#include <FileConstants.au3>
#include <ButtonConstants.au3>
#include <File.au3>
#include <Array.au3>
#include <StringConstants.au3>

Global $set = 3

;==========================Main GUI===========================
$hGUI = GUICreate("Complex-Permissions", 250, 350)
;=============================================================

;==========================Inputs=============================
$hOld = GUICtrlCreateInput("", 95, 25, 130)
$hNew = GUICtrlCreateInput("", 95, 50, 130)
$hOldSvr1 = GUICtrlCreateInput("", 95, 75, 25)
GUICtrlSetLimit(-1, $set)
$hOldSvr2 = GUICtrlCreateInput("", 130, 75, 25)
GUICtrlSetLimit(-1, $set)
$hOldSvr3 = GUICtrlCreateInput("", 165, 75, 25)
GUICtrlSetLimit(-1, $set)
$hOldSvr4 = GUICtrlCreateInput("", 200, 75, 25)
GUICtrlSetLimit(-1, $set)
$hNewSvr1 = GUICtrlCreateInput("", 95, 100, 25)
GUICtrlSetLimit(-1, $set)
$hNewSvr2 = GUICtrlCreateInput("", 130, 100, 25)
GUICtrlSetLimit(-1, $set)
$hNewSvr3 = GUICtrlCreateInput("", 165, 100, 25)
GUICtrlSetLimit(-1, $set)
$hNewSvr4 = GUICtrlCreateInput("", 200, 100, 25)
GUICtrlSetLimit(-1, $set)
$hLetter = GUICtrlCreateInput("", 95, 125, 130)
$hShare = GUICtrlCreateInput("", 95, 150, 130)
$hLocal = GUICtrlCreateInput("", 95, 175, 130)
$hFolder = GUICtrlCreateInput("", 95, 200, 130)
$hUID = GUICtrlCreateInput("", 95, 225, 130)
$hExclude = GUICtrlCreateInput("", 95, 250, 130)
;=============================================================

;==========================Buttons============================
$hButton1 = GUICtrlCreateButton("Test", 25, 285, 50)
;~ GUICtrlSetState(-1, $GUI_HIDE)
$hButton2 = GUICtrlCreateButton("Migrate Data / " & @CRLF & "Change Permissions", 100, 285, 120, 50, $BS_MULTILINE)
;=============================================================

;==========================Labels=============================
$hLabel1 = GUICtrlCreateLabel("Old Domain", 10, 28)
$hLabel2 = GUICtrlCreateLabel("New Domain", 10, 53)
$hLabel3 = GUICtrlCreateLabel("Old Server (IP)", 10, 78)
$hLabel4 = GUICtrlCreateLabel("New Server (IP)", 10, 103)
$hLabel5 = GUICtrlCreateLabel("Drive Letter", 10, 128)
$hLabel5 = GUICtrlCreateLabel("Share Folder", 10, 153)
$hLabel6 = GUICtrlCreateLabel("Local Folder", 10, 178)
$hLabel7 = GUICtrlCreateLabel("Folder Name", 10, 203)
$hLabel8 = GUICtrlCreateLabel("User Name", 10, 228)
$hLabel9 = GUICtrlCreateLabel("Exclusions", 10, 253)
;=============================================================

GUISetState(@SW_SHOW, $hGUI)

While 1
    Switch GUIGetMSG()
        Case $GUI_EVENT_CLOSE
            ExitLoop


        Case $hButton1
            _uArray()

        Case $hButton2
;~             _NetUse()
;~             _RoboCopy()
            _Perm()

    EndSwitch

WEnd



;=============================================================
;~                     Functions
;=============================================================

Func _NetUse()
    RunWait(@ComSpec & " /c " & "net use \\" & GUICtrlRead($hOldSvr1) & "." & GUICtrlRead($hOldSvr2) & "." & GUICtrlRead($hOldSvr3) & "." & GUICtrlRead($hOldSvr4) & "\c$ /user:" & GUICtrlRead($hOld) & "\axeontech", "", @SW_HIDE)
    RunWait(@ComSpec & " /c " & "net use \\" & GUICtrlRead($hOldSvr1) & "." & GUICtrlRead($hOldSvr2) & "." & GUICtrlRead($hOldSvr3) & "." & GUICtrlRead($hOldSvr4) & "\Admin$ /user:" & GUICtrlRead($hOld) & "\axeontech", "", @SW_HIDE)
    Sleep(2000)
EndFunc    ;= _NetUse


Func _RoboCopy()
    If GUICtrlRead($hExclude) <> "" then
        RunWait(@ComSpec & " /k " & "robocopy /B \\" & GUICtrlRead($hOldSvr1) & "." & GUICtrlRead($hOldSvr2) & "." & GUICtrlRead($hOldSvr3) & "." & GUICtrlRead($hOldSvr4) & "\" & GUICtrlRead($hShare) & "\" & GUICtrlRead($hFolder) & " \\" & GUICtrlRead($hNewSvr1) & "." & GUICtrlRead($hNewSvr2) & "." & GUICtrlRead($hNewSvr3) & "." & GUICtrlRead($hNewSvr4) & "\" & GUICtrlRead($hShare) & "\" & GUICtrlRead($hFolder) & " /E /mir /XD " & GUICtrlRead($hFolder) & "\" & GUICtrlRead($hExclude) & "/w:0 /r:0 /log:c:\users\" & @UserName & "\desktop\migrate_profiles.txt", "", @SW_SHOW)
        MsgBox(0, "", "RoboCopy w/ Exceptions: Complete")
    Else
        RunWait(@ComSpec & " /k " & "robocopy /B \\" & GUICtrlRead($hOldSvr1) & "." & GUICtrlRead($hOldSvr2) & "." & GUICtrlRead($hOldSvr3) & "." & GUICtrlRead($hOldSvr4) & "\" & GUICtrlRead($hShare) & "\" & GUICtrlRead($hFolder) & " \\" & GUICtrlRead($hNewSvr1) & "." & GUICtrlRead($hNewSvr2) & "." & GUICtrlRead($hNewSvr3) & "." & GUICtrlRead($hNewSvr4) & "\" & GUICtrlRead($hShare) & "\" & GUICtrlRead($hFolder) & " /E /mir /w:0 /r:0 /log:c:\users\" & @UserName & "\desktop\migrate_profiles.txt", "", @SW_SHOW)
        MsgBox(0, "", "RoboCopy w/o Exceptions: Complete")
    EndIf

;~     Sleep(2000)
EndFunc    ;= _RoboCopy


Func _Perm()
;~     If GUICtrlRead($hLocal) = "" then
;~         GUICtrlSetData($hLocal, GUICtrlRead($hShare))
;~     EndIf

    Local $hFileOpen = FileOpen("c:\users\" & @UserName & "\desktop\log.txt", $FO_APPEND)

        Local $iPID = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&TAKEOWN /f " & GUICtrlRead($hFolder) & " /r /d y", "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID)
            Local $sOutput = StdoutRead($iPID)
            FileWrite($hFileOpen, $sOutput)
;~         Sleep(1000)
        Local $iPID1 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & " /reset /T", "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID1)
            Local $sOutput = StdoutRead($iPID1)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID2 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & "\*.* /inheritance:d /c /t", "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID2)
            Local $sOutput = StdoutRead($iPID2)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID3 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & " /grant " & '"' & 'system":(OI)(CI)F /c /t', "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID3)
            Local $sOutput = StdoutRead($iPID3)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID4 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & " /grant " & '"' &  @ComputerName & '\administrator":(OI)(CI)F /c /t', "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID4)
            Local $sOutput = StdoutRead($iPID4)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID5 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & " /grant " & '"' &  @ComputerName & '\administrators":(OI)(CI)F /c /t', "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID5)
            Local $sOutput = StdoutRead($iPID5)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID6 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & " /grant " & '"' & GUICtrlRead($hNew) & '\domain admins":(OI)(CI)F /c /t', "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID6)
            Local $sOutput = StdoutRead($iPID6)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID7 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & " /grant " & '"' & GUICtrlRead($hNew) & '\' & GUICtrlRead($hUID) & '":(OI)(CI)F /c /t', "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID7)
            Local $sOutput = StdoutRead($iPID7)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID8 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & " /setowner " & '"' & GUICtrlRead($hNew) & '\' & GUICtrlRead($hUID) & '" /c /t', "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID8)
            Local $sOutput = StdoutRead($iPID8)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID9 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & "\*.* /remove:g " & '"' & 'everyone" /c /t', "", @SW_HIDE, $STDERR_MERGED)
            ProcessWaitClose($iPID9)
            Local $sOutput = StdoutRead($iPID9)
            FileWrite($hFileOpen, $sOutput)
        Local $iPID10 = Run(@ComSpec & " /c " & GUICtrlRead($hLetter) & ":&&cd\" & GUICtrlRead($hLocal) & "&&icacls " & GUICtrlRead($hFolder) & "\*.* /remove:g " & '"' & GUICtrlRead($hNew) & '\axeontech" /c /t', "", @SW_HIDE, $STDERR_MERGED) ;
            ProcessWaitClose($iPID10)
            Local $sOutput = StdoutRead($iPID10)
            FileWrite($hFileOpen, $sOutput)

    FileClose($hFileOpen)
    MsgBox(0, "", "Permissions Change: Complete")

EndFunc    ;= _Perm


Func _uArray()

    $fFileList = _FileListToArray(GUICtrlRead($hLetter) & ":\" & GUICtrlRead($hLocal), "*", 2)
;~     _ArrayDisplay($fFileList, "$fFileList")
    $fFolder = _ArrayToString($fFileList, "|")
    $fSplit = StringSplit($fFolder, "|", $STR_ENTIRESPLIT)
    Run("Notepad")
    Sleep(1000)

For    $i = 1 To $fSplit[0]
    Send($fSplit[$i])

Next

EndFunc
 

Thanks

Grimm

Share this post


Link to post
Share on other sites

grimmlock,

As you do not specify precisely, I presume it is this section that is causing you problems:

$fFileList = _FileListToArray(GUICtrlRead($hLetter) & ":\" & GUICtrlRead($hLocal), "*", 2)
;~     _ArrayDisplay($fFileList, "$fFileList")
    $fFolder = _ArrayToString($fFileList, "|")
    $fSplit = StringSplit($fFolder, "|", $STR_ENTIRESPLIT)
    Run("Notepad")
    Sleep(1000)

For    $i = 1 To $fSplit[0]
    Send($fSplit[$i])

Next
Firstly, the code is working exactly as the Help file describes. If you want to Send the result to Notepad as separate lines then you need to add a line delimiter like this: :)

Send($fSplit[$i] & @CR)
But better still would be to convert the array directly into a string containing the line delimiter and then send it in one: ;)

$fFolder = _ArrayToString($fFileList, @CR)
Run("Notepad")
Sleep(1000)
Send($fFolder)
All clear? :)

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Very clear thank you for the help and explination, as always I am humbled :bye:

But now the hard part for me, I need to somehow take the data from the array and use it set some of the variables :sweating:.


Thanks

Grimm

Share this post


Link to post
Share on other sites

grimmlock,

As always, glad I could help. :)

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By TXTechie
      Hello Everyone,
      I've developed my own GUI using AutoIt and I'm allowing users to minimize the GUI, but I also want to include some kind of timer so that it will automatically restore the GUI after something like 30 minutes or an hour. However, I also want them to be able to manually restore the GUI by clicking the application's icon in the taskbar.
      I've searched through the forums, but I'm not sure how to get started.
      Any ideas or functions to research are appreciated!
      Regards,
      TX Techie
    • By Jangal
      Hello friends
      This app is slow
      How to increase its speed?
       
      #include <Array.au3> #include <StringConstants.au3> #include <File.au3> #include <String.au3> Global $aWord[][2]  = [[1, "google"],[2,"hello"]]


        Global $sFileName = @ScriptDir & "\1.txt" ; 2MB Text File Local $sFileRead = FileRead($sFileName) Local $res = StringRegExp($sFileRead, "(*UCP)\b[\pL\d]{2,}", 3) _ArrayDisplay($res)   for $sWord in $res     $iIndex = _ArraySearch($aWord, $sWord, 0, 0, 0, 0, 1, 2)     ;MsgBox(0,0,$iIndex)     if $iIndex == -1 Then         Local $aFill = [[0,$sWord]]         _ArrayAdd($aWord,$aFill)        ;      Else         $aWord[$iIndex][0] +=1     EndIf   Next _ArrayDisplay($aWord)

      1.txt
    • By Rskm
      Hi, recently i created a GUI for some calculations in AutoIT.  The GUI has 2 tabs and on the first tab, it has few inputboxes where i use to click with mouse and start entering the inputs. i recently made some changes in the position of these textboxes. I made this by changing the autoit code file instead of making changes in KODA. Now i cannot click inside these textboxes with mouse. However, i can use TAB key to cycle through/enter input in these input boxes. what could have made the inputboxes not responding to mouseclicks. thanks
    • By TheDcoder
      Hi everyone,
      I am bit stumped as to why I am not able to set the time in the Date control
      #include <DateTimeConstants.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> Example() Func Example() GUICreate("My GUI get date", 200, 200, 800, 200) Local $idDate = GUICtrlCreateDate("1953/04/25", 10, 10, 185, 20, $DTS_TIMEFORMAT) ; to select a specific default format Local $sStyle = "HH:mm:ss" GUICtrlSendMsg($idDate, $DTM_SETFORMATW, 0, $sStyle) ; Set time Local $iRet = GUICtrlSetData($idDate, '13:33:37') ConsoleWrite('GUICtrlSetData returned ' & ($iRet = 1 ? 'success' : 'failure') & @CRLF) GUISetState(@SW_SHOW) ; Loop until the user exits. While GUIGetMsg() <> $GUI_EVENT_CLOSE WEnd MsgBox($MB_SYSTEMMODAL, "Time", GUICtrlRead($idDate)) EndFunc ;==>Example The documentation for GUICtrlSetData clearly mentions that it uses the same format as GUICtrlRead:
      But I get failure
      What gives?
      Thanks for the help in advance!
    • By thedemons
      Introduction
      ImGui is a popular library written by ocornut, it can make awesome user interface based on directx. It is being used by many big apps/games.  The UI is nice and flexible, easy to use because of frame-by-frame drawing. So I decided to convert the entire ImGui library to AutoIt
      At first it's just an experiment, i converted some basic draw functions of imgui, compile to a dll, then using DllCall in autoit to call the functions. I was testing to see how much FPS i can get in autoit, and i was expected a low FPS, since autoit is slow. Suprisingly, the FPS turned out to be so high, it works really fast, even when drawing 1000 buttons at the same time. Features
      More than +270 functions converted from ImGui (compiled dll). Has 90% of the capability of what you can do in C++; Usable ImGuiIO and ImGuiStyle, so you can set whatever configurations you like. Preview
          
      Usage
      #include <WinAPI.au3> #include "ImGui.au3" ; Create a window Local $hwnd = _ImGui_GUICreate("AutoIt ImGui", 1024, 768) _WinAPI_ShowWindow($hwnd) ; Set style color _ImGui_StyleColorsLight() ;~ _ImGui_StyleColorsDark() Local $f_value = 5 While 1 ; when the user click close button on the window, this will return false if Not _ImGui_PeekMsg() Then Exit ; must call _ImGui_BeginFrame() _ImGui_Begin("Another window") _ImGui_Text("Hello there..") If _ImGui_Button("click me") Then $f_value = 5 _ImGui_SliderFloat("slider", $f_value, 2, 20) If _ImGui_IsItemHovered() Then _ImGui_ToolTip("what r u doing?") _ImGui_End() ; must call _ImGui_EndFrame() Wend  
      Remark
      Most of the functions were converted automatically. I haven't tested all of them yet, if some function doesn't work for you, please tell me. Still missing some features of ImGui, please tell me if you needed any. Run \tools\imgui-au3-setup.au3 to add _ImGui functions to SciTE auto-complete. Source Code
      Require: DirectX GitHub: imgui-autoit
×
×
  • Create New...