Jump to content
antonioj84

Passing value then compare in function

Recommended Posts

antonioj84

#include <MsgBoxConstants.au3>
#include <StringConstants.au3>
#include <string.au3>

Opt("WinTitleMatchMode", 4)

Local $title, $cstate, $valueEvaluate, $valueFound, $value

$test2 = "Question"

$text1 = "Are you sure you want day?"

$value = _TitleCheck($valueFound)

Func _TitleCheck($pass1)

    $title = WinGetTitle($test2)

    If WinExists($title, "") Then WinActivate($title, "")

    $Question = WinGetHandle($title, "")

    ;$cstate = StringInStr(WinGetText($valueFound), $text1 ) ;this code by itself work
    ;however instead I want to create a list to evaluate as below and return a match

    $cstate = WinGetText($valueFound) ; the value is there how

    Local $newcstate = listvalue($cstate)

    If $newcstate Then

        ConsoleWrite($newcstate & @CRLF & @CRLF)

        Run("notepad.exe")

    Else

        ConsoleWrite($newcstate & @CRLF & @CRLF)

        MsgBox(0, "", "")

    EndIf

EndFunc   ;==>_TitleCheck

;I want to compare in func listvalue a retun a match as  1 no match 0

Func listvalue($text1)

    $text1 = "Are you sure you want y?"

    $text2 = "what day it is"

    $text3 = " what month is today"

    Return ()

EndFunc   ;==>listvalue

 

Edited by antonioj84
Added code tags

Share this post


Link to post
Share on other sites
Melba23

antonioj84,

You have been here long enough to know that when you post code you shoulde use Code tags - see here how to do it.  Then you get a scrolling box and syntax colouring as you can see above now I have added the tags.

M23

 


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
jguinch

You can use an array and use _Array functions (or a standard loop) :

#Include <Array.au3>

Global $aText[3] = ["Are you sure you want y?", "what day it is", "what month is today"]

If _ArraySearch($aText, "what day it is") <> -1 Then
    ConsoleWrite("text found")
Else
    ConsoleWrite("text not found")
EndIf

 

Share this post


Link to post
Share on other sites
antonioj84

Thanks that was pretty quick resolved Thanks  Jguing hats downdown.

 

 Melba sorry dude

Share this post


Link to post
Share on other sites
antonioj84

k

 
Edited by antonioj84
must be be deleted

Share this post


Link to post
Share on other sites
antonioj84

;Credit to Jguinch

;This is my final code that work for me, if it can help someone
;the window title is "Question" there will be various messages on window pop up that
;will be captures with "wingettext", and stored in  "$valuefound" which is the text
;read from the windows  and "$text1" is the array containing the text to compare
;with.

 
 
#include <MsgBoxConstants.au3>
#include <StringConstants.au3>
#include <string.au3>
Opt("WinTitleMatchMode", 4)
 
Global $title, $cstate, $valueEvaluate,$valueFound, $value
Local $test2 ="Question"
 
Global $text1[6]
$text1[0]= "I am home now1"
$text1[1]= "I am home now2"
$text1[2]= "I am home now3"
$text1[3]= "I am home now4"
$text1[4] ="Are you sure you want to Close the Store and start end of Day?"
$text1[5]= "I am home now5"
 
$value= _TitleCheck($valueFound)
 
 
Func _TitleCheck($pass1)
$title = WinGetTitle($test2)
If WinExists($title,"") Then WinActivate($title,"")
$Question = WinGetHandle($title,"")
 
for $i = 0 to UBound($text1) - 1
 
if  StringInStr(WinGetText($valueFound), $text1[$i] ) Then
 
  ConsoleWrite($text1[$i] & " :found" & @CRLF)
 
  Else
 
ConsoleWrite($text1[$i] &" :Not found" & @CRLF)
EndIf
 
next
 
EndFunc

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Emmhor1
      By Emmhor1
      Hi All,

      MAIN QUESTION:
      Is it possible to Call specific function within a GUI

      So I have a script with multiple functions although I don't want to use every function every time.
      My Idea is to create a simple GUI which allows me to select what functions I want to use then run the funtions by clicking a button.
      I have already made a GUI which allows me to select specific .exe's I would like to run after selection it runs the .exe one by one.
      This script is on my work laptops and cannot access it right now.
       
      Who can help me with this?
      GUIcreate
      Func1 
      Func2
      Func3
      Then have a boxes which allows me to select the specif Func.(I used GUIChecked and Unchecked in my other script)
      Then a button which executes/calls the selected functions
    • FrancescoDiMuro
      By FrancescoDiMuro
      Good evening everyone
      I was trying to insert function header to the functions of my script, but, in the SciTE console, this appears:
      Function or struct definition not found, unable to insert header. @Jos Any suggestion?
      Thanks in advance.

      Best Regards.
    • Amixg
      By Amixg
      Hi! I have another problem with AutoIT.  You see, I'm still the one who's just starting out with this great programming language. I have a problem with AutoIT, it seems not to recognize the "StringReplace" function even when it is by default. The code was made half in KODA and half of my own. It is a software programmed for the Italian language (I am Italian) and translate the SMS language into Italian correct. Would you help me? Thanks in advance.
       
      #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> $hull = "hello" StringReplace($hull, "hello", "hellx") $Form1 = GUICreate("Linguaggio SMS A Italiano", 507, 498, 192, 124) $Edit1 = GUICtrlCreateEdit("", 24, 40, 465, 177) GUICtrlSetData(-1, "") $Label1 = GUICtrlCreateLabel("Inserisci qui il testo che non riesci a capire:", 24, 8, 205, 17) $Label2 = GUICtrlCreateLabel("Ecco il testo tradotto(non toccare questo campo):", 27, 237, 237, 17) $Edit2 = GUICtrlCreateEdit("", 24, 264, 465, 137) GUICtrlSetData(-1, "") $Button1 = GUICtrlCreateButton("Traduci", 104, 424, 249, 49) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 StringReplace(GUICtrlGetData($Label1), "qlc", "qualcuno") StringReplace(GUICtrlGetData($Label1), "qls", "qualcosa") StringReplace(GUICtrlGetData($Label1), "ke", "che") StringReplace(GUICtrlGetData($Label1), "x", "per") StringReplace(GUICtrlGetData($Label1), "pls", "per favore") StringReplace(GUICtrlGetData($Label1), "tu6", "tu sei") StringReplace(GUICtrlGetData($Label1), "zzz", "mi fai dormire") StringReplace(GUICtrlGetData($Label1), "hagn", "Buonanotte") StringReplace(GUICtrlGetData($Label1), "tvtb", "Ti voglio tanto bene") StringReplace(GUICtrlGetData($Label1), "tat", "Ti amo tanto") StringReplace(GUICtrlGetData($Label1), "lafs", "Amore a prima vista") StringReplace(GUICtrlGetData($Label1), "fli?", "Flirtiamo?") StringReplace(GUICtrlGetData($Label1), "msidt", "Mi sono innamorato di te") StringReplace(GUICtrlGetData($Label1), "ba", "Bacio") StringReplace(GUICtrlGetData($Label1), "midi", "Mi dispiace.") StringReplace(GUICtrlGetData($Label1), "ntm", "Non ti merito") StringReplace(GUICtrlGetData($Label1), "tdp", "Togliti dai piedi.") StringReplace(GUICtrlGetData($Label1), "amò", "Amore") StringReplace(GUICtrlGetData($Label1), "ap", "A presto!") StringReplace(GUICtrlGetData($Label1), "cmq", "comunque") StringReplace(GUICtrlGetData($Label1), "cvd", "Ci vediamo dopo") StringReplace(GUICtrlGetData($Label1), "Tvb", "Ti voglio bene") StringReplace(GUICtrlGetData($Label1), "nn", "non") StringReplace(GUICtrlGetData($Label1), "risp", "rispondimi") StringReplace(GUICtrlGetData($Label1), "cel", "cellulare") StringReplace(GUICtrlGetData($Label1), "dom", "qualcosa") StringReplace(GUICtrlGetData($Label1), "nm", "numero") StringReplace(GUICtrlGetData($Label1), "fv", "favore") StringReplace(GUICtrlGetData($Label1), "-male", "meno male") StringReplace(GUICtrlGetData($Label1), "disc", "discoteca") StringReplace(GUICtrlGetData($Label1), "se#", "settimana") StringReplace(GUICtrlGetData($Label1), "+ o -", "più o meno") StringReplace(GUICtrlGetData($Label1), "ts", "torno subito") StringReplace(GUICtrlGetData($Label1), "tvtbcoa", "Ti voglio tanto bene come amica") EndSwitch WEnd  
    • Karnalsyn
      By Karnalsyn
      As with a lot of programming, the less manual repetition done to achieve the same outcome...the better.
      I package programs for network deployment at the organization I work for. Sometimes these applications require verbose messaging to the user, and sometimes by special request we have to turn that off and deploy silently.
      The way I currently handle these 2 scenarios is this.
      I have a function that builds the splashwin display screen to variable size depending on message length, and displays the desired message to the end user.
      Then at each point throughout my script as I need to make the user aware of what is currently happening, I inject a splashwin function call with the unique message pertaining to that specific event. ie. "Installing Microsoft Office, please wait..."
      In effort to build a more universal script to handle any type of request submitted. I've incorporated a switch command of '/silent'
      If cmdlineraw detects the usage of that switch when the script is triggered it sets a variable flag, ie. $silent = "on"
      Then at every splashwin call I make, I'm prefixing it with an IF statement that checks for the flag, and then does NOT display the message if that flag is "on". Or does display it if its not. Has worked for me just fine. But while I grow my programming skills and look for more streamlined ways of handling areas I find myself creating repetition. I'm curious if I can relocate that flag check. Taking it out of every single splashwin call, and injecting it into the function itself.
      Example of how I currently display or hide the splashwin based on command line...
      If StringInStr($cmdlineraw, "/silent", 0) Then
          $SilentSwitch = "ON"
      EndIf
      If $SilentSwitch = "OFF" Then SplashWin($Uninstalling & $ProductInfo[1][0])
      Some scripts have dozens of those splashwin calls littered throughout, so Is this the best approach I can take already? Or as stated earlier, can I pull the IF statement away from the splashwin call. And left the function as a whole either activate or deactivate as a result of the command line check.
    • wakillon
      By wakillon
      SciTE Hopper : Jump to Any line by one click and many other helpfull functions !


      As Ashalshaikh suggested me after leaving me the task to continue >SciTE Hopper, i open a new Topic about it.
      It will be more easy for futures updates.

      Many helpfull functions in contextual menu.
      SciTE Hopper is now multipurpose.
      • Color Catcher added
      • BinaryToAu3Kompressor added
      • TinyAu3Search replaced by StringFinder
      • RegJumper added
      • Edit With SciTE added (available in Options)
      • SpecialCharactersViewer added (available in Tray menu)
      New Contextual Menu :

      For a right Click on a function :

      • Copy function name
      • Insert a function header
      • Cut function
      • Copy function
      • Delete function
      • Create a variables List
      • Remove usseless Blank lines
      • Remove Debug lines ( all lines starting with ConsoleWrite or _ArrayDisplay )
      • Set AutoIt Code Layout
      • Remove Comments

      For entire script :

      • Create a functions List
      • Create a variables List
      • Remove usseless Blank lines
      • Remove Debug lines ( all lines starting with ConsoleWrite or _ArrayDisplay )
      • Set AutoIt Code Layout
      • Remove Comments
      • ( Open in SciTE a ) Duplicate of current Script in Temp Dir
      • ( Open in SciTE a ) Duplicate of current Script in Same Dir
      • Explore Parent Script Folder
      • Copy Script name
      • Copy Script path
      • Find Unused Functions
      • Find Unused Variables
      • Set all functions in alphabetic order.( func headers and regions ( in fact, all lines between functions ) are not supported.)

      SciTE Editor New Contextual Menu if SciTE Hopper is added ( in Options ) to SciTE Editor :
      when you made a selection in SciTE Editor you can :

      • Open a Reg Key in Regedit using RegJumper
      • Open a Url in your default Browser
      • Search on google in your default Browser
      • Search on AutoIt Website in your default Browser
      Now Can be added to windows start (minimized)
      Options are available by Tray Menu.
      A double click on tray icon will open clipboard content to SciTE Editor ( Handy when you have copied some code from your browser )

      How to proceed for add SciTE Hopper to SciTE Editor :
      Run Scite Editor, run Scite Hopper ( compiled! ) go to Options and select Add/Remove to SciTE Tab. then click on Add button and it's done !
      Right click on SciTE Editor and choose SciTE Hopper in Contextual Menu for run it when you need it !
      Update of 07 Dec 2017
      TinyAu3Search is replaced by StringFinder

      Previous downloads : 1287
      Script and compiled version are available in the download section
       
      Thanks to Ashalshaikh, Melba23, Th3 MMA, Alzri2, taitel, Manadar, taz742, Yashield, Authenticity, Xenobiologist for their help
      and asdf8 for his >Includes Helper and azjio for his >FileSearch.

      Hope it help you and happy Scripting !

       
×