Jump to content
Nahnilaruka

Command Line Parameters

Recommended Posts

Hi, I have a small problem with typing parametr in command line

My working code is:

Run(@comspec & ' /c "C:\Users\G514204\Desktop\Capture2Text\Capture2Text.exe " '  & $x11  & " " &  $y11 & " " & $x21 & " " & $y21 & " " & ' output.txt', "",@SW_MINIMIZE )


But I need instead output.txt to set different path like :"C:\Users\G514204\Desktop\Results\output.txt". Double quotes are necessary, $x11, $y11... are coordinates. In shorcut on desktop in field Target is written: C:\Users\G514204\Desktop\Capture2Text\Capture2Text.exe 369 510 715 558 "C:\Users\G514204\Desktop\AutoIt Results\output.txt"

Can anyone give me some advice? I will be very grateful.

Share this post


Link to post
Share on other sites

Nahnilaruka,

Welcome to the AutoIt forums.

But in future, please do not hijack non-related threads - just start a new one as I have now done for you.

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

?

@comspec & ' /c "C:\Users\G514204\Desktop\Capture2Text\Capture2Text.exe" ' & $x11 & ' ' & $y11 & ' ' & $x21 & ' ' & $y21 & ' "C:\Users\G514204\Desktop\AutoIt Results\output.txt"'

 

Share this post


Link to post
Share on other sites

I tried this, it didnt work. Output file is not created, nowhere. when I use  only folder, not fullpath like below, it is working

somefolder\output.txt

but when i use C:\some path\output.txt" it didnt work..

Share this post


Link to post
Share on other sites

Try this.

Run(@comspec & ' /c "C:\Users\G514204\Desktop\Capture2Text\Capture2Text.exe" '  & $x11  & " " &  $y11 & " " & $x21 & " " & $y21 & " " & ' "C:\Users\G514204\Desktop\AutoIt Results\output.txt"', "" , @SW_MINIMIZE)

This gives you a command line like this:

C:\Windows\system32\cmd.exe /c "C:\Users\G514204\Desktop\Capture2Text\Capture2Text.exe" 1 1 1 1  "C:\Users\G514204\Desktop\AutoIt Results\output.txt"


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

With some DOS (Console programs) you need to provide a working directory, so I often have to do something like the following.

Run(@comspec & ' /c Capture2Text.exe '  & $x11  & " " &  $y11 & " " & $x21 & " " & $y21 & " " & ' "C:\Users\G514204\Desktop\AutoIt Results\output.txt"', "C:\Users\G514204\Desktop\Capture2Text" , @SW_MINIMIZE)

 


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Make sure brain is in gear before opening mouth!
Remember, what is not said, can be just as important as what is said.

Spoiler

What is the Secret Key? Life is like a Donut

If I put effort into communication, I expect you to read properly & fully, or just not comment.
Ignoring those who try to divert conversation with irrelevancies.
If I'm intent on insulting you or being rude, I will be obvious, not ambiguous about it.
I'm only big and bad, to those who have an over-active imagination.

I may have the Artistic Liesense ;) to disagree with you. TheSaint's Toolbox (be advised many downloads are not working due to ISP screwup with my storage)

userbar.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Burgs
      Greetings,
        I would like to be able to write a script to send commands to the console for creation of Gstreamer pipelines.  I was thinking of something similar to this:
      Local $iPID = Run("C:\Windows\System32\cmd", "", @SW_MAXIMIZE) ;THIS OPENS THE CONSOLE...!!! if $iPID == 0 Then ConsoleWrite(@CRLF & "I DID NOT OPEN CMD...error: " & @error & @CRLF) if $iPID <> 0 Then ConsoleWrite(@CRLF & "I OPENED CMD...!!!" & @CRLF) $hCmd = WinGetHandle("C:\WINDOWS\system32\cmd.exe") if $hCmd <> 0 Then WinActivate($hCmd) ;ensure command console is active... $sOutput = Send("cd C:\gstreamer\1.0\x86_64\bin" & @CRLF, $SEND_RAW) $sOutput = Send("gst-launch-1.0 videotestsrc ! autovideosink" & @CRLF, $SEND_RAW) Sleep(3000) ControlSend($hCmd, "", "", "exit" & @CR) EndIf ;$hCmd NOT "0"... I don't really know if this is the best way to open the console and send commands into it.  I'm also not sure about how to best catch any errors that may occur...likely this needs to be accomplished with the STDOUTREAD command however I've not had experience using it before and therefore would appreciate some advice that anybody may offer. 
      Basically I'm seeking guidance on how to best automate the opening of the console, sending lines of commands to be executed, and handling any potential errors in the execution of those commands...I thank you in advance.  Regards.
    • By MadhaN
      Hi all,
      I have a csv file as below, I wand to find srno from csv and send corresponding ip and pass to commend cmd prompt. 
      Please guide me to create script .
      srno,name,ip,pass
      1,name1,ip1,pass1
      2,name2,ip2,pass2
       
       
       
       
    • By nacerbaaziz
      Hi dear
      With this script you can print Unicode text in the CMD screen
      the script is  easy to use
      just you  write the text that contains Unicode in the first input
      and the script automatically reflect the code in the second input
       you can copy the text to the clipboard
      or you can try printing the text in the CMD window
      I apologize to everyone for colors and shape if not appropriate
      I'm a blind man and I do not see
      Thank you for your understanding
      Greetings to all of youCmdUtM.au3
    • By Simpel
      Hi.
      Thanks to this post (https://www.autoitscript.com/forum/topic/189553-writing-to-cmd/?do=findComment&comment=1361142) I can now write a helpfile to the cmd when for instance passing parameter -h or -help at cmd. But then cmd is blocked by the script (I had to free it with CTRL+BREAK):
      #include <WinAPI.au3> _WinAPI_AttachConsole() $hConsole = _WinAPI_GetStdHandle(1) _WinAPI_WriteConsole($hConsole, "Print helpfile................" & @CRLF) Inside MSDN Library then I found this sentence: A process can use the FreeConsole function to detach itself from its console.
      But I don't find something like _WinAPI_FreeConsole(). How can I do it in another way?
      Regards, Conrad
    • By TheAutomator
      A fullscreen console with custom commands!

      Introduction:
      Hi everyone!
      This funny project started as a question in the help section:
      https://www.autoitscript.com/forum/topic/174404-edit-detect-key-before-updating-content/
      I'd like to share this script with everyone that is interested. 
       
      Why would I want it?
      You like the old style fullscreen console (like in the old day's), You can add custom commands, You can customize the font a lot more compared to cmd.exe, You can share ideas or add tweaks to the script.  
      Still to do:
      Write a simple custom programming language to implement this tool. Writing a little help file / pdf to describe my little programming language. Add little sound effects like a beep if there is a syntax error (optional). Clean up and modify Console.Au3 content. Add an option to have to type a login password (optional). Make an optional installer that also gives scripts for this tool a custom icon and open with command. ...Call Neo?  
      Thanks to:
      xxaviarxx: debugging, some ideas. jguinch: debugging, adding a bunch of tweaks and ideas. kylomas: debugging, new ideas.  
      Edits and updates:
      Added usage of tab key in edit control Edit has focus now on startup I'm currently rewriting a simple custom programming language to implement this tool.  
      UDF download: Console.au3
       
      Regards
      TheAutomator
×
×
  • Create New...