Jump to content

IE DOM usage for SVG files


Recommended Posts

Is it somehow possible to use SVGPathElement DOM interface to convert a SVG file to polygons within AutoIt?

  • load a SVG file with AutoIt
  • convert the SVG vectors to polygons using this interface
  • export the polygons to a file

I don't know whether it works also for multi vectorized objects.

An example is here: http://phrogz.net/svg/convert_path_to_polygon.xhtml / http://stackoverflow.com/questions/8091983/convert-path-to-polygon / https://www.w3.org/TR/SVG/paths.html#InterfaceSVGPathElement

 

I've absolutely no experiences with this kind of stuff (you know it is not GDI+ ;-))

 

THANKS.

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Link to post
Share on other sites

That bot picked you up quick.  You should make it repeat something like a giant ascii middle finger.

https://twitter.com/fmuaddib/status/719951296707608576

,-. .--. ________ .-. .-. ,---. ,-. .-. .-. .-.
|(| / /\ \ |\ /| |__ __||| | | || .-' | |/ / \ \_/ )/
(_) / /__\ \ |(\ / | )| | | `-' | | `-. | | / __ \ (_)
| | | __ | (_)\/ | (_) | | .-. | | .-' | | \ |__| ) (
| | | | |)| | \ / | | | | | |)| | `--. | |) \ | |
`-' |_| (_) | |\/| | `-' /( (_)/( __.' |((_)-' /(_|
'-' '-' (__) (__) (_) (__)

Link to post
Share on other sites
4 hours ago, iamtheky said:

That bot picked you up quick.  You should make it repeat something like a giant ascii middle finger.

https://twitter.com/fmuaddib/status/719951296707608576

Bad robot:

....................../´¯) 
....................,/¯../ 
.................../..../ 
............./´¯/'...'/´¯¯`·¸ 
........../'/.../..../......./¨¯\ 
........('(...´...´.... ¯~/'...') 
.........\.................'...../ 
..........''...\.......... _.·´ 
............\..............( 
..............\.............\... 

 

Well, I started to write a very simple SVG to GDI+ path converter but then I discovered that there are plenty of SVG formats and commands :o -> I gave it up.

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Link to post
Share on other sites
  • 5 years later...

Is this project idea dead or on sabbatical?

As I learn more about SVG files I can't help but wish I could use them (converted to GDI+ or text copied into my scripts)

The draw here (for me) is to be able to make complex graphics without including a bunch of PNGs  / BMPs (or any)

The scale of this is beyond my skill but I am hopeful.

To share : I do have a shadow of a workaround - if you make simple SVGs one color (0x000000) and import them into Fontello and use them (with the Fontello font) like Wingdings in GDI+. The glyphs are completely scalable and I've gotten good results for some simple designs. You can make different parts of your image separately and merge them together as shapes (with different color fill / stroke) else each glyph is all the same color(s).

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Pured
      I am looking to create a script which refreshes/reads a webpage every few seconds. My goal is to see if the page has changed, then I will send myself a notification that the webpage has been updated.
       
      However, rather than downloading the entire webpage every single time, is there a way to check when the webpage last updated?
       
      If not, is there away to partially download/read html source until a specific tag is hit?
       
      Goal: I would like to increase my poll rate and not excessively waste data.
    • By mLipok
      In the past there was many questions about how to: "Automatic file upload using without user interaction"

      https://www.autoitscript.com/forum/topic/92907-ie-8-input-namenomfic-typefile-idnomfic/
      https://www.autoitscript.com/forum/topic/116899-cant-automate-input-typefile-tag-in-ie/?tab=comments#comment-815478
      https://www.autoitscript.com/forum/topic/14883-input-typefile/
      https://www.autoitscript.com/forum/topic/188708-how-to-set-the-value-of-an-input-typefile-element/
      https://www.autoitscript.com/forum/topic/91513-how-can-i-auto-set-file-path-for-input-file-in-ie/
      https://www.autoitscript.com/forum/topic/116899-cant-automate-input-typefile-tag-in-ie/
      https://www.autoitscript.com/forum/topic/169190-how-to-script-file-upload-button/
      https://www.autoitscript.com/forum/topic/145327-how-to-deal-with-ie-window-for-upload-a-fileinput-typefile/
      https://www.autoitscript.com/forum/topic/140482-internet-explorer-input-file-problem/
       
      I found solution here: 
      https://stackoverflow.com/questions/33253517/upload-a-file-via-input-input-in-html-form-with-vba
      and:
      https://www.motobit.com/tips/detpg_uploadvbsie/
      And I translate this code to AutoIt3 code:
      ; Upload file using http protocol And multipart/form-data ; v1.01 ; 2001 Antonin Foller, PSTRUH Software Global $oErrorHandler = ObjEvent("AutoIt.Error", _ErrFunc) do_vbsUpload() Func do_vbsUpload() #cs ; We need at least two arguments (File & URL) ConsoleWrite('- ' & @ScriptLineNumber & @CRLF) If $CmdLine[0] < 2 Then InfoEcho() ConsoleWrite('- ' & @ScriptLineNumber & @CRLF) ; Are some required objects missing? If StringInStr(CheckRequirements(), "Error") > 0 Then InfoEcho() ConsoleWrite('- ' & @ScriptLineNumber & @CRLF) Local $s_FileName, $s_DestURL, $s_FieldName $s_FieldName = "FileField" ; Default field name For $i_argCounter = 1 To $CmdLine[0] ConsoleWrite('+ '& $i_argCounter& ' >> ' & $CmdLine[$i_argCounter] & @CRLF) Select Case $i_argCounter = 1 ;~ $s_FileName = $CmdLine[$i_argCounter] $s_FileName = @ScriptFullPath Case $i_argCounter = 2 $s_DestURL = $CmdLine[$i_argCounter] Case $i_argCounter = 3 $s_FieldName = $CmdLine[$i_argCounter] EndSelect Next UploadFile($s_DestURL, $s_FileName, $s_FieldName) #ce UploadFile('http://www.dobeash.com/test.html', @ScriptFullPath, 'fileExample') EndFunc ;==>do_vbsUpload ; ******************* upload - begin ; Upload file using input type=file Func UploadFile($s_DestURL, $s_FileName, $s_FieldName) ; Boundary of fields. ; Be sure this string is Not In the source file Const $Boundary = "---------------------------0123456789012" ; Get source file As a binary data. Local $d_FileContents = GetFile($s_FileName) ; Build multipart/form-data document Local $s_FormData = BuildFormData($d_FileContents, $Boundary, $s_FileName, $s_FieldName) ; Post the data To the destination URL IEPostBinaryRequest($s_DestURL, $s_FormData, $Boundary) EndFunc ;==>UploadFile ; Build multipart/form-data document with file contents And header info Func BuildFormData($d_FileContents, $Boundary, $s_FileName, $s_FieldName) Const $s_ContentType = "application/upload" ; The two parts around file contents In the multipart-form data. Local $s_Pre = "--" & $Boundary & @CRLF & mpFields($s_FieldName, $s_FileName, $s_ContentType) Local $s_Po = @CRLF & "--" & $Boundary & "--" & @CRLF ; Build form data using recordset binary field Const $i_adLongVarBinary = 205 Local $oRS = ObjCreate("ADODB.Recordset") ; https://docs.microsoft.com/en-us/sql/ado/reference/ado-api/append-method-ado?view=sql-server-ver15 $oRS.Fields.Append("b", $i_adLongVarBinary, StringLen($s_Pre) + BinaryLen($d_FileContents) + StringLen($s_Po)) $oRS.Open() $oRS.AddNew() ; Convert Pre string value To a binary data Local $i_LenData = StringLen($s_Pre) $oRS("b").AppendChunk(StringToMB($s_Pre) & StringToBinary(Chr(0))) $s_Pre = $oRS("b").GetChunk($i_LenData) $oRS("b") = "" ; Convert Po string value To a binary data $i_LenData = StringLen($s_Po) $oRS("b").AppendChunk(StringToMB($s_Po) & StringToBinary(Chr(0))) $s_Po = $oRS("b").GetChunk($i_LenData) $oRS("b") = "" ; Join Pre & $d_FileContents & Po binary data $oRS("b").AppendChunk($s_Pre) $oRS("b").AppendChunk($d_FileContents) $oRS("b").AppendChunk($s_Po) $oRS.Update() Local $s_FormData = $oRS("b") $oRS.Close() Return $s_FormData EndFunc ;==>BuildFormData ; sends multipart/form-data To the URL using IE Func IEPostBinaryRequest($s_URL, $s_FormData, $Boundary) ; Create InternetExplorer Local $oIE = ObjCreate("InternetExplorer.Application") ; You can uncoment Next line To see form results $oIE.Visible = True ; Send the form data To $s_URL As POST multipart/form-data request $oIE.Navigate($s_URL, '', '', $s_FormData, _ "Content-Type: multipart/form-data; boundary=" & $Boundary & @CRLF) While $oIE.Busy Wait(1, "Upload To " & $s_URL) WEnd ; Get a result of the script which has received upload ;~ On Error Resume Next Local $s_IE_InnerHTML = $oIE.Document.body.innerHTML MsgBox(0, 'TEST #' & @CRLF & @ScriptLineNumber, $s_IE_InnerHTML) $oIE.Quit() Return $s_IE_InnerHTML EndFunc ;==>IEPostBinaryRequest ; Infrormations In form field header. Func mpFields($s_FieldName, $s_FileName, $s_ContentType) Local $s_MPTemplate = _ ; template For multipart header 'Content-Disposition: form-data; name="{field}";' & _ 'FileName="{file}"' & @CRLF & _ 'Content-Type: {ct}' & @CRLF & @CRLF & _ '' Local $s_Out $s_Out = StringReplace($s_MPTemplate, "{field}", $s_FieldName) $s_Out = StringReplace($s_Out, "{file}", $s_FileName) $s_Out = StringReplace($s_Out, "{ct}", $s_ContentType) Return $s_Out EndFunc ;==>mpFields Func Wait($i_Seconds, $s_Message) MsgBox(64, '', $s_Message, $i_Seconds) EndFunc ;==>Wait ; Returns file contents As a binary data Func GetFile($s_FileName) Local $oStream = ObjCreate("ADODB.Stream") $oStream.Type = 1 ; Binary $oStream.Open() $oStream.LoadFromFile($s_FileName) Local $d_GetFile = $oStream.Read() $oStream.Close() Return $d_GetFile EndFunc ;==>GetFile ; Converts OLE string To multibyte string Func StringToMB($S) Local $I, $B For $I = 1 To StringLen($S) $B &= StringToBinary(Asc(StringMid($S, $I, 1))) Next Return $B EndFunc ;==>StringToMB ; ******************* upload - end ; ******************* Support ; Basic script info Func InfoEcho() Local $sMsg = _ "Upload file using http And multipart/form-data" & @CRLF & _ "Copyright (C) 2001 Antonin Foller, PSTRUH Software" & @CRLF & _ "use" & @CRLF & _ "[cscript|wscript] fupload.vbs file $s_URL [fieldname]" & @CRLF & _ " file ... Local file To upload" & @CRLF & _ " $s_URL ... $s_URL which can accept uploaded data" & @CRLF & _ " fieldname ... Name of the source form field." & @CRLF & _ @CRLF & CheckRequirements() & @CRLF & _ "" ConsoleWrite('! ' & $sMsg & @CRLF) EndFunc ;==>InfoEcho ; Checks If all of required objects are installed Func CheckRequirements() Local $sMsg = _ "This script requires some objects installed To run properly." & @CRLF & _ CheckOneObject("ADODB.Recordset") & @CRLF & _ CheckOneObject("ADODB.Stream") & @CRLF & _ CheckOneObject("InternetExplorer.Application") & @CRLF & _ "" Return $sMsg ; $sMsgBox $sMsg EndFunc ;==>CheckRequirements ; Checks If the one object is installed. Func CheckOneObject($sClassName) Local $sMsg ObjCreate($sClassName) If @error = 0 Then $sMsg = "OK" Else $sMsg = "Error:" & @error EndIf Return $sClassName & " - " & $sMsg EndFunc ;==>CheckOneObject ; ******************* Support - end ; User's COM error function. Will be called if COM error occurs Func _ErrFunc(ByRef $oError) ; Do anything here. ConsoleWrite(@ScriptName & " (" & $oError.scriptline & ") : ==> COM Error intercepted !" & @CRLF & _ @TAB & "err.number is: " & @TAB & @TAB & "0x" & Hex($oError.number) & @CRLF & _ @TAB & "err.windescription:" & @TAB & $oError.windescription & @CRLF & _ @TAB & "err.description is: " & @TAB & $oError.description & @CRLF & _ @TAB & "err.source is: " & @TAB & @TAB & $oError.source & @CRLF & _ @TAB & "err.helpfile is: " & @TAB & $oError.helpfile & @CRLF & _ @TAB & "err.helpcontext is: " & @TAB & $oError.helpcontext & @CRLF & _ @TAB & "err.lastdllerror is: " & @TAB & $oError.lastdllerror & @CRLF & _ @TAB & "err.scriptline is: " & @TAB & $oError.scriptline & @CRLF & _ @TAB & "err.retcode is: " & @TAB & "0x" & Hex($oError.retcode) & @CRLF & @CRLF) EndFunc ;==>_ErrFunc  
      But I miss something and the code not works as intendend.
      Please join and contribute, in solving this issue, as this will be handy for entire community.
      @mLipok
       
      btw.
      I think that this may be realated to ChrB() which I simply translate to StringToBinary()
      Especialy this :
      StringToBinary(Chr(0))) could be the main issue.
      But for now I'm tired and going to sleep.
      Hope maybe tomorrow somebody solve this issue.
       
    • By Deshanur
      Am trying to automate injecting credential on the login form for all kind of Web application for IE. I know how to identify the form name by viewing the source code and using the method - _IEFormGetObjByName($ie, $form_Name).
      I would like to know how to identify or get the form object for the web app where there is no form name tag for example below, for the is I have used - _IEFormGetCollection($ie, 0) to get the form object.
      My Question is does it work for all kind of application "_IEFormGetCollection($ie, 0)" how to identify Index value? is it always 0? is there any better solution?
      The final solution am looking for is find out form object, get the username, password field and inject credential and submit the form.
      How to find out index value? for the forms which does not have form name field.
      $login_form = _IEFormGetCollection($ie, 0) $email_field = _IEFormElementGetObjByName($login_form, $form_UserName) $pass_field = _IEFormElementGetObjByName($login_form, $form_password) $login_button = _IEFormElementGetObjByName($login_form, $form_submitbutton) _IEFormElementSetValue($email_field, $CmdLine[2]) _IEFormElementSetValue($pass_field, $CmdLine[3]) ControlSend($hwnd, "", "[CLASS:Internet Explorer_Server; INSTANCE:1]","{Enter}") OR This works fine if the form has form name. $login_form = _IEFormGetObjByName($ie, $form_Name) $email_field = _IEFormElementGetObjByName($login_form, $form_UserName) $pass_field = _IEFormElementGetObjByName($login_form, $form_password) $login_button = _IEFormElementGetObjByName($login_form, $form_submitbutton) _IEFormElementSetValue($email_field, $CmdLine[2]) _IEFormElementSetValue($pass_field, $CmdLine[3]) ControlSend($hwnd, "", "[CLASS:Internet Explorer_Server; INSTANCE:1]","{Enter}")
    • By devilspride
      The following code creates a IE blank window
      Local $oIE = _IECreate()  
      But when i use Navigate to the URL, it open the URL in Microsoft Edge instead if IE.
      _IENavigate($oIE,$url)  
      What should i do to navigate in IE.
      Complete code :
      #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <IE.au3> #Region TESTING Local $url = 'https://www.youtube.com' Local $oIE = _IECreate() _IENavigate($oIE,$url) #EndRegion Console Output
      IE.au3 T3.0-2 Error from function _IELoadWait, $_IESTATUS_ClientDisconnected (-2147023174, Browser has been deleted prior to operation.)  
      I have searched the forums but did not find such kind of post.
      Other posts were describing How to use Edge using Web driver selenium.
       
      Edit: I am working in Windows10. Recently many changes have been done by Microsoft to IE and Microsoft Edge. (2020)
      Earlier in 2019 this was working fine.
    • By Zaoka
      I'm trying to create script that would login on my SAP WEBI "web page" and replace some uploaded excel files. But i'm having problem on even the log in.
      These are user fill elements with Firefox Inspector
      <input type="text" id="_id0:logon:CMS" name="_id0:logon:CMS"> <input type="text" id="_id0:logon:USERNAME" name="_id0:logon:USERNAME"> <input type="password" id="_id0:logon:PASSWORD" name="_id0:logon:PASSWORD"> LogOnButton
      <input type="submit" id="_id0:logon:logonButton" value="Log On" class="logonButtonNoHover logon_button_no_hover" onmouseover="this.className = 'logonButtonHover logon_button_hover';" onmouseout="this.className = 'logonButtonNoHover logon_button_no_hover';">  
       
      My example, I tried _IEGetObjByName and _IEGetObjById but the script only open page but will not even fill out the form
        #include <IE.au3> Call("signIn") Func signIn() Global $oIE = _IECreate("http://192.xxx.xxx.xx:xxx/BOE/BI") Sleep (5000) Local $server = _IEGetObjByName($oIE, "_id0:logon:CMS") Local $username = _IEGetObjByName($oIE, "_id0:logon:USERNAME") Local $password = _IEGetObjByName($oIE, "_id0:logon:PASSWORD") Local $button = _IEGetObjById($oIE, "_id0:logon:logonButton") _IEFormElementSetValue($server, "TestServer:1000") _IEFormElementSetValue($username, "MyUserName") _IEFormElementSetValue($password, "MyPass") ; THIS PART ABOUT BUTTON CLICK I DONT UNDERSTAND AT ALL $sSelector = "body > div:nth-of-type(2) > div > div:nth-of-type(3) > div > table > tbody > tr > td > table > tbody > tr > td > table > tbody > tr:nth-of-type(1) > td > div > div:nth-of-type(1) > form > div:nth-of-type(5) > button" $signInUC = $oIE.document.QuerySelector($sSelector) _IEAction($signInUC, "click") EndFunc ;==>signIn  
      I would be very grateful for any help
×
×
  • Create New...