Trolleule

Detect ListView Item delay click

6 posts in this topic

Hi,

i try to simulate the $LVS_EDITLABELS behaviour so by clicking twice the item can be edited but the second mouse click has to be a little bit delayed to trigger the editing. The editing has to be done in other columns too, so i can't use $LVS_EDITLABELS.

So

- one click selects an item

- double click performs a specific function

- one click + another 800ms delayed click performs an editing

Does someone have an idea?

#AutoIt3Wrapper_au3check_parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6
#include <GuiConstantsEx.au3>
#include <GuiListView.au3>
#include <GuiImageList.au3>
#include <WindowsConstants.au3>

Opt('MustDeclareVars', 1)

Global $Debug_LV = False ; Check ClassName being passed to ListView functions, set to True and use a handle to another control to see it work

Global $aClick_Info[2]
Global $hListView, $hTmp_Edit
Global $GUI, $hImage
$GUI = GUICreate("(UDF Created) ListView Create", 400, 300)

$hListView = _GUICtrlListView_Create($GUI, "", 2, 2, 394, 268)
_GUICtrlListView_SetExtendedListViewStyle($hListView, BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT, $LVS_EX_SUBITEMIMAGES))
GUISetState()

GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

; Load images
$hImage = _GUIImageList_Create()
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($hListView, 0xFF0000, 16, 16))
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($hListView, 0x00FF00, 16, 16))
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($hListView, 0x0000FF, 16, 16))
_GUICtrlListView_SetImageList($hListView, $hImage, 1)

; Add columns
_GUICtrlListView_InsertColumn($hListView, 0, "Column 1", 100)
_GUICtrlListView_InsertColumn($hListView, 1, "Column 2", 100)
_GUICtrlListView_InsertColumn($hListView, 2, "Column 3", 100)

; Add items
_GUICtrlListView_AddItem($hListView, "Row 1: Col 1", 0)
_GUICtrlListView_AddSubItem($hListView, 0, "Row 1: Col 2", 1)
_GUICtrlListView_AddSubItem($hListView, 0, "Row 1: Col 3", 2)
_GUICtrlListView_AddItem($hListView, "Row 2: Col 1", 1)
_GUICtrlListView_AddSubItem($hListView, 1, "Row 2: Col 2", 1)
_GUICtrlListView_AddItem($hListView, "Row 3: Col 1", 2)

; Loop until user exits
Do
Until GUIGetMsg() = $GUI_EVENT_CLOSE
GUIDelete()

Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)
    #forceref $hWnd, $iMsg, $iwParam
    Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $tInfo
    $hWndListView = $hListView
    If Not IsHWnd($hListView) Then $hWndListView = GUICtrlGetHandle($hListView)

    $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iIDFrom = DllStructGetData($tNMHDR, "IDFrom")
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $hWndFrom
        Case $hWndListView
            Switch $iCode
                Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    Local $iIndex, $iSubItem, $sTmp_Text, $aRect, $aPos
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    $iIndex = DllStructGetData($tInfo, "Index")
                    $iSubItem = DllStructGetData($tInfo, "SubItem")
                    _DebugPrint("$NM_CLICK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode & @LF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @LF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @LF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))

                    ; make sure user clicks on the listview & only the activate
                    If $iIndex <> -1 Then
                        GUICtrlDelete($hTmp_Edit)

                        $aClick_Info[0] = $iIndex
                        $aClick_Info[1] = $iSubItem

;~                      GUISetAccelerators($aAccelKeys)

                        $sTmp_Text = _GUICtrlListView_GetItemText($hWndListView, $iIndex, $iSubItem)
                        ConsoleWrite("item: " & $iIndex & " subitem: " & $iSubItem & " text: " & $sTmp_Text & @CRLF)

                        If $iSubItem = 0 Then
                            $aRect = _GUICtrlListView_GetItemRect($hWndListView, $iIndex, 2)
                        Else
                            $aRect = _GUICtrlListView_GetSubItemRect($hWndListView, $iIndex, $iSubItem)
                        EndIf

                        $aPos = ControlGetPos("", "", $hWndListView)
                        ConsoleWrite("Information :" & StringFormat("Item 2 Rectangle : [%d, %d, %d, %d]", $aRect[0]+ $aPos[0], $aRect[1]+ $aPos[1], $aRect[2], $aRect[3]) & @CRLF)


                        $hTmp_Edit = GUICtrlCreateEdit($sTmp_Text, $aRect[0] + $aPos[0], $aRect[1] + $aPos[1], $aRect[2] - $aRect[0], $aRect[3] - $aRect[1], 0)
                        GUICtrlSetState($hTmp_Edit, $GUI_FOCUS)
                    EndIf


                Case $NM_DBLCLK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_DBLCLK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode & @LF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @LF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @LF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RCLICK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode & @LF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @LF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @LF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    Return 0 ; allow the default processing
                Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key
                    _DebugPrint("$NM_RETURN" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode)
            EndSwitch
    EndSwitch
    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY

Func _DebugPrint($s_text, $line = @ScriptLineNumber)
    ConsoleWrite( _
            "!===========================================================" & @LF & _
            "+======================================================" & @LF & _
            "-->Line(" & StringFormat("%04d", $line) & "):" & @TAB & $s_text & @LF & _
            "+======================================================" & @LF)
EndFunc   ;==>_DebugPrint

 

Share this post


Link to post
Share on other sites



Trolleule,

Why not just use a modifier key to distinguish between a "normal" and "delayed" doubleclick cases? That way you can use the same handler to detect the doubleclick and then use _IsPressed to look for the modifier key and adjust the resulting action accordlingly.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Sure, but i got it. Now i try to select/mark the text in the edit control, but it seems impossible. I will open a new thread.

Thanks for your thoughts!

Share this post


Link to post
Share on other sites

#4 ·  Posted (edited)

I think you will building a UDF for editing each Item in a LV. Why not using a already writen UDF, @Melba23 and @Kanashius have oublished one on autoitscript @BugFix and @Kanashius have published one on autoit.de. This 3 UDF's are surely not the only one, but i think the top 3. In https://autoit.de/index.php/Thread/12137-Perle-f%C3%BCr-alle-LV-Benutzer-gefunden-muss-aber-noch-poliert-werden/  i introduce a UDF (from Gary Frost) which integrats also DateTimePicker, ComboBox and ProgressBar by using callback. 

Edited by AutoBert

Share this post


Link to post
Share on other sites

hey AutoBert,

thanks for this inspiration. This example helds some really nice tricks, I grant, but sorry...the code is a piece of shit! The code has made me angry, the implementation is horrifically, but i have learned by watching.

Share this post


Link to post
Share on other sites
1 hour ago, Trolleule said:

...the code is a piece of shit!

The sub-title i give the thread is not correct: "must be polished first" => "must be rewriten" would be better. I used this 4. udf in a project with several LVs i full acknodledge.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • Luigi
      By Luigi
      Greetings forum,
      Hi develop this script, to use context menu with listview.
      It's work fine, run and click with left or right mouse button, you see on Console the id from item.
      If you click none, the id is -1, like this:
      $NM_RCLICK[-1] $NM_RCLICK[-1] $NM_RCLICK[2] $NM_RCLICK[1] $NM_RCLICK[0] $NM_RCLICK[1] That is correct.
      But if you uncoment the line:
      GUIRegisterMsg($WM_CONTEXTMENU, "WM_CONTEXTMENU")
      You have to click with left button (over item or none) and after click with right button.
      LeftButton is to update $HOSTS_INDEX.
      RightButton is to open ContextMenu.
       
      Exist another way to update $HOSTS_INDEX?
      Example:
      Call WM_NOTIFY every time WM_CONTEXTMENU is called?
      I ask this, becouse i cant understanding why $HOSTS_INDEX is not updated when WM_CONTEXTMENU is uncomented.
      Someone can explain or help me?
       
      Best regards.
      ;~ #AutoIt3Wrapper_AU3Check_Parameters= -q -d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7 ;~ #Tidy_Parameters=/sf #include-once #include-once #include <Array.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <GuiMenu.au3> #include <WindowsConstants.au3> #include <WinAPI.au3> #include <SendMessage.au3> #include <Timers.au3> #include <AutoItConstants.au3> #include <EditConstants.au3> #include <File.au3> #include <FontConstants.au3> #include <GuiComboBoxEx.au3> #include <GuiImageList.au3> #include <GuiTreeView.au3> #include <ListViewConstants.au3> #include <StaticConstants.au3> #include <TreeViewConstants.au3> #include <String.au3> OnAutoItExitRegister("OnExit") Opt("GUIOnEventMode", 1) Opt("GUIEventOptions", 1) Opt("MustDeclareVars", 1) Global Enum $eCREATE = 1000, $eUPDATE, $eDELETE, $eICON_TABLE, $eDEFAULT, $eEXPORT_HTML Global Const $EMPTY = -1 Global $HOSTS_INDEX = -1 Global $HOST_Host Global $aGuiSize[2] = [800, 600] Global $sGuiTitle = "GuiTitle" Global $hGui Global $iList, $hList $hGui = GUICreate($sGuiTitle, $aGuiSize[0], $aGuiSize[1]) GUISetOnEvent($GUI_EVENT_CLOSE, "Quit") $iList = GUICtrlCreateListView("nome", 20, 50, 240, 490) $hList = GUICtrlGetHandle($iList) _GUICtrlListView_SetColumnWidth($hList, 0, 236) Populate() GUISetState(@SW_SHOW, $hGui) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") ;~ GUIRegisterMsg($WM_CONTEXTMENU, "WM_CONTEXTMENU") While Sleep(25) WEnd Func OnExit() GUISetState($hGui, @SW_HIDE) GUIDelete($hGui) EndFunc ;==>OnExit Func Quit() Exit EndFunc ;==>Quit Func Populate() Local $arr[4] = [3, "nome 1", "nome 2", "nome 3"] _GUICtrlListView_BeginUpdate($hList) _GUICtrlListView_DeleteAllItems($hList) For $ii = 1 To $arr[0] _GUICtrlListView_AddItem($hList, $arr[$ii]) Next _GUICtrlListView_SetItemSelected($hList, 0, True, True) _GUICtrlListView_EndUpdate($hList) EndFunc ;==>Populate Func WM_CONTEXTMENU($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam, $lParam ConsoleWrite("WM_CONTEXTMENU..( $hWnd=" & $hWnd & ", $iMsg=" & $iMsg & ", $wParam=" & $wParam & ", $lParam=" & $lParam & " )" & @LF) Local $exec = 0 Local $hMenu Switch $wParam Case $hList Local $TRY_ID = _GUICtrlListView_GetHotItem($hList) If Not ($TRY_ID = $HOSTS_INDEX) Then $HOSTS_INDEX = $TRY_ID Local $aOrigin = _GUICtrlListView_GetOrigin($hList) ConsoleWrite("WM_CONTEXTMENU $HOSTS_INDEX[" & $HOSTS_INDEX & "] $aOrigin[" & _GUICtrlListView_GetOriginX($iList) & "]" & @LF) $hMenu = _GUICtrlMenu_CreatePopup() If $HOSTS_INDEX = $EMPTY Then _GUICtrlMenu_InsertMenuItem($hMenu, 0, "Add", $eCREATE) Else _GUICtrlMenu_InsertMenuItem($hMenu, 0, "Rename", $eUPDATE) _GUICtrlMenu_InsertMenuItem($hMenu, 1, "Del", $eDELETE) EndIf _GUICtrlMenu_SetMenu($hGui, $hMenu) $exec = _GUICtrlMenu_TrackPopupMenu($hMenu, $wParam, -1, -1, 1, 1, 2, 1) _GUICtrlMenu_DestroyMenu($hMenu) EndSwitch Return True EndFunc ;==>WM_CONTEXTMENU Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam, $lParam Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $tInfo $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iIDFrom = DllStructGetData($tNMHDR, "IDFrom") $iCode = DllStructGetData($tNMHDR, "Code") Local $TRY_ID Switch $hWndFrom Case $hList $TRY_ID = _GUICtrlListView_GetHotItem($hList) If Not ($TRY_ID = $HOSTS_INDEX) Then $HOSTS_INDEX = $TRY_ID Switch $iCode Case $NM_CLICK ConsoleWrite("$NM_CLICK[" & $TRY_ID & "]" & @LF) If $HOSTS_INDEX = $EMPTY Or $HOST_Host Then ;~ HOSTS_Clear() ;~ HOSTS_ListView_ItemCancel() ;~ GUICtrlSetState($HOSTS_ITEM_DEL, $GUI_DISABLE) ;~ GUICtrlSetState($HOSTS_ITEM_UPD, $GUI_DISABLE) Else Local $name = _GUICtrlListView_GetItemText($hList, $HOSTS_INDEX) ;~ HOSTS_FieldLoad($name) ;~ GUICtrlSetState($HOSTS_ITEM_DEL, $GUI_ENABLE) ;~ GUICtrlSetState($HOSTS_ITEM_UPD, $GUI_ENABLE) EndIf Return 0 ; allow the default processing Case $NM_RCLICK ConsoleWrite("$NM_RCLICK[" & $TRY_ID & "]" & @LF) Return 0 ; allow the default processing EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY  
    • amphoric
      By amphoric
      Hi,
      I am struggling converting my 1D array to a 2D array and then showing that in my List View. Below is my current code, where I would like to take the array from the input box, and have that displayed as a list within the list view this is a list of computer names, and then update the 2nd column of each line once I have ran a ping and a registry change on each computer name, with either 'Completed' and 'Failed'
      I have checked out the AutoIt Arrays page here: https://www.autoitscript.com/wiki/Arrays , but unfortunately I cannot get my head around it. Any help would be greatly appreciated.
      I hope this makes sense.
      Thanks
       
      #include <Date.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Array.au3> #include <MsgBoxConstants.au3> #include <GUIListBox.au3> #include <GuiListView.au3> #Region ### $Form1 = GUICreate("Title", 515, 533, -1, -1) GUISetBkColor(0xFFFFFF) $Pic2 = GUICtrlCreatePic("Images\pic.jpg", 16, 16, 212, 28) $Label1 = GUICtrlCreateLabel("Label", 240, 16, 271, 33, $SS_CENTER) GUICtrlSetFont(-1, 17, 800, 0, "") $Combo1 = GUICtrlCreateCombo("", 256, 406, 241, 25, BitOR($GUI_SS_DEFAULT_COMBO,$CBS_SIMPLE)) $Label2 = GUICtrlCreateLabel("Please select the location", 45, 401, 210, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $ChangeButton = GUICtrlCreateButton("Change", 286, 487, 75, 25) $RePromptButton = GUICtrlCreateButton("Re-prompt User", 366, 487, 139, 25) $Checkbox1 = GUICtrlCreateCheckbox("I have ensured that my selection is correct.", 10, 487, 273, 25) GUICtrlSetFont(-1, 10, 400, 0, "") $ManLocation = GUICtrlCreateLabel("Please enter the location:", 59, 448, 189, 20, $SS_RIGHT) GUICtrlSetFont(-1, 10, 800, 0, "") GUICtrlSetState(-1, $GUI_HIDE) $ManLocInput = GUICtrlCreateInput("", 256, 445, 241, 24) GUICtrlSetState(-1, $GUI_HIDE) $Label5 = GUICtrlCreateLabel("for this device:", 138, 418, 109, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Label3 = GUICtrlCreateLabel("Asset Number:", 98, 72, 107, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Input1 = GUICtrlCreateInput("", 215, 69, 241, 24) $AddMulti = GUICtrlCreateLabel("Add Multiple Assets", 356, 55, 98, 13, $SS_RIGHT) GUICtrlSetFont(-1, 8, 400, 6, "") GUICtrlSetColor(-1, 0x808080) GUICtrlSetCursor (-1, 0) $List1 = GUICtrlCreateListView("", 16, 104, 481, 278) $Add = GUICtrlCreateButton("Add", 461, 68, 35, 25) GUISetState(@SW_SHOW) #EndRegion ### ;### StartForm ### $FormaMultiple = GUICreate("Title", 277, 418, -1, -1) GUISetBkColor(0xFFFFFF) $Label1 = GUICtrlCreateLabel("Please add 1 asset number per line.", 8, 11, 253, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif") $OK = GUICtrlCreateButton("OK", 56, 375, 75, 25) $Edit1 = GUICtrlCreateEdit("", 20, 40, 233, 329) $Cancel = GUICtrlCreateButton("Cancel", 136, 375, 75, 25) GUISetState(@SW_HIDE) ;### EndForm ### ;### Add List View Columns START ### ;### Add List View Columns END ### ;### Read Locations START ### ;Read the LOCAL ini file SECTIONS Global $aSections = IniReadSectionNames("Locations.ini") ;If the above succeeded, convert the array to a string with each item separated by a | (pipe) and set the default selected item to $aSections[1] If(Not @Error) Then GUICtrlSetData($Combo1, _ArraytoString($aSections, "|", 1), $aSections[1]) ;### Read Locations END ### ;### Require Admin START ### ;#RequireAdmin ;### Require Admin END ### While 1 $nMsg = GUIGetMsg() ;### Data Validation START ### ;Set Checkbox = ENABLE/DISABLE if not GUICtrlRead($Combo1) = "" AND GUICtrlRead($Combo1) = "Not In List" then if not GUICtrlRead($ManLocInput) = "" Then If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) Else If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) EndIf Else if GUICtrlRead($Combo1) = "" Then If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) Else If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) EndIf EndIf ;Set Button = ENABLE/DISABLE If GUICtrlRead($Checkbox1) = 1 Then If Not ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_ENABLE) Else If ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_DISABLE) EndIf ;### Data Validation END ### Switch $nMsg Case $GUI_EVENT_CLOSE Exit case $Add Case $AddMulti GUISetState(@SW_SHOW, $FormaMultiple) Case $Cancel GUISetState(@SW_HIDE, $FormaMultiple) Case $OK $sText = GUICtrlRead($Edit1) $aText = StringSplit($sText, @CRLF, 1) $bText = _ArrayToString($aText, ";", 1, -1) $cText = StringStripWS($bText, $STR_STRIPALL ) $dText = StringReplace($cText,";;",";") GUICtrlSetData($Input1, $dText) GUICtrlSetData($Edit1, "") GUISetState(@SW_HIDE, $FormaMultiple) For $i = 1 To $aText[0] Next Case $Combo1 ; If the combo is actioned Switch GUICtrlRead($Combo1) Case "Not In List" ; Show the manual input controls GUICtrlSetState($ManLocation, $GUI_SHOW) GUICtrlSetState($ManLocInput, $GUI_SHOW) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") Case Else ; Hide them GUICtrlSetState($ManLocation, $GUI_HIDE) GUICtrlSetState($ManLocInput, $GUI_HIDE) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") EndSwitch Case $ChangeButton ChangeReg() Case $RePromptButton RemoveReg() EndSwitch WEnd Func ChangeReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & " Changed to: " & GUICtrlRead($Combo1)) Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg Func RemoveReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & "CLEARED") Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg1  
    • Monica
      By Monica
      Hi guys!! I'm going crazy... please help me -.-
      First, open the attached screenshot. Second: I'd like to grab info from external window. The program is "Metatrader4", a tool for trading and charts analysis.
      The function _GUICtrlListView_GetItemText() return an empty string! I tried to change the index $index (the second parameter) into Number($index), as recommended by other similar posts in this forum, but this did not solve my problem 
      Well, why I'm going mad? Because in my mind an UDF approach works great or it does not work at all; instead, in my code something works and something else does not. I really don't understand why... and you?
      THXX!!!!  
      $handle=ControlGetHandle("Expert - "&$expertname,"",1383);List: Variable|Value For $i=0 To _GUICtrlListView_GetItemCount($handle)-1;WORKS!!! $temp=_GUICtrlListView_GetItemText($handle,0+$i);RETURN EMPTY STRING :-( MsgBox(0, "", $temp) $temp = _GUICtrlListView_GetItemSelected($handle,$i);WORKS!!! MsgBox(0, "", $temp) Next  

    • islandspapand
      By islandspapand
      Hi all
      i am currently trying to click on an element in a HTML Table, but just can get it to work.
      i am able to click the top of the table so it changes to sort  but just can't click on the element in the table.
      an i need to click on element to continue in the site.
      i have attached the code so far and pictures of the table  element want to click plus the source of the table.
      i am able to get data in the table with $oTable = _IETableGetCollection($oIE, 2) but not able to click on them.
       
      Help is very much appreciated
       
      #cs ---------------------------------------------------------------------------- AutoIt Version: 3.3.14.2 Author: myName Script Function: Template AutoIt script. #ce ---------------------------------------------------------------------------- ; Script Start - Add your code below here #include <IE.au3> #include "DOM.au3" #include <Array.au3> #include <MsgBoxConstants.au3> Global $oIE = _IECreate("*") _IELoadWait($oIE) Sleep(2000) _PageLogin($oIE) _PageLoadWait() _PageNewReq($oIE) _PageLoadWait() _InputModelInf($oIE) _PageLoadWait() Sleep(1000) $aTableLink = BGe_IEGetDOMObjByXPathWithAttributes($oIE, "//table/tbody/tr/td[.='Name Of user']", 2000) ;~ $aTableLink = BGe_IEGetDOMObjByXPathWithAttributes($oIE, "//table/tbody/tr", 2000) ;~ _ArrayDisplay($aTableLink,"$aTableLink") If IsArray($aTableLink) Then ConsoleWrite("Able to BGe_IEGetDOMObjByXPathWithAttributes($oIE, //table/tbody/tr/td[.='Name Of user'])" & @CRLF) For $i = 0 To UBound($aTableLink)-1 ConsoleWrite(" OuterHTML : " & $aTableLink[$i].outerHTML & @CRLF) ConsoleWrite(" Parentnode : " & $aTableLink[$i].parentnode & @CRLF) ConsoleWrite(" Parentnode.click : " & $aTableLink[$i].parentnode.fireEvent("onclick","click") & @CRLF) $objClick = $aTableLink[$i].parentnode ;~ _IEAction($aTableLink[$i] , "focus") _IEAction($objClick , "focus") ;~ If _IEAction($aTableLink[$i], "click") Then If _IEAction($objClick, "click") Then ConsoleWrite("Able to _IEAction($aForumLink[0], 'click')" & @CRLF) _IELoadWait($oIE) Else ConsoleWrite("UNable to _IEAction($aForumLink[0], 'click')" & @CRLF) Exit 3 EndIf Next Else ConsoleWrite("Unable to BGe_IEGetDOMObjByXPathWithAttributes($oIE, //table/tbody/tr/td[.='Name Of user'])" & @CRLF) Exit 2 EndIf _PageLoadWait() Func _InputModelInf($oTmpIE) ; Add Var for Model & Serial in Func $oModelInput = _IEGetObjById($oTmpIE,"model") _IEAction($oModelInput,"focus") _IEDocInsertText($oModelInput, "*") $oSerialInput = _IEGetObjById($oTmpIE,"serial") _IEAction($oModelInput,"focus") _IEDocInsertText($oSerialInput, "*") $links = $oTmpIE.document.getElementsByClassName("btn btn-primary ng-scope") For $link In $links If $link.innertext = "Søg" Or $link.innertext = "Search" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageNewReq($oTmpIE) $links = $oTmpIE.document.getElementsByClassName("ng-scope k-link") For $link In $links If $link.innertext = "Send ny fejlmelding" Or $link.innertext = "Submit a New Service Request" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageLogin($oTmpIE) $oUserInput = _IEGetObjById($oTmpIE,"loginid") _IEDocInsertText($oUserInput, "*") $oPasswordInput = _IEGetObjById($oTmpIE,"password") _IEDocInsertText($oPasswordInput, "*") $links = $oTmpIE.document.getElementsByClassName("btn btn-primary login ng-scope") For $link In $links If $link.innertext = "Sign in" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageLoadWait() Local $PageLoadWait = False ;~ nav navbar-nav navbar-right ng-hide ;~ nav navbar-nav navbar-right $tags = $oIE.document.GetElementsByTagName("ul") For $tag in $tags $class_value = $tag.GetAttribute("class") If $class_value = "nav navbar-nav navbar-right" Then ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : Webpage loading :) ' & @CRLF) ;### Debug Console $PageLoadWait = True ExitLoop EndIf Next Do sleep(250) For $tag in $tags $class_value = $tag.GetAttribute("class") If $class_value = "nav navbar-nav navbar-right ng-hide" Then ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : Webpage load finished :)'& @CRLF) ;### Debug Console $PageLoadWait = False ExitLoop EndIf Next Until $PageLoadWait = False EndFunc  
      Thanks in advance
       
       


    • mLipok
      By mLipok
      I was not lucky to find the right function so I created it by my self:
      _GUICtrlListView_GetColumnID_ByName()
      Example:
       
      #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <MsgBoxConstants.au3> Example() Func Example() GUICreate("ListView Get Column ID", 400, 300) Local $idListview = GUICtrlCreateListView("Alfa|Beta|Gama", 2, 2, 394, 268) GUISetState(@SW_SHOW) _GUICtrlListView_SetColumnOrder($idListview, "2|0|1") MsgBox($MB_SYSTEMMODAL, "Information", "Column ID: " & _GUICtrlListView_GetColumnID_ByName($idListview, 'Gama')) ; Loop until the user exits. Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() EndFunc ;==>Example Func _GUICtrlListView_GetColumnID_ByName($hListView, $sColumnToFind) Local $iColumn_Count = _GUICtrlListView_GetColumnCount($hListView) Local $aColumns For $iColumn_idx = 0 To $iColumn_Count - 1 $aColumns = _GUICtrlListView_GetColumn($hListView, $iColumn_idx) If $aColumns[5] = $sColumnToFind Then Return $iColumn_idx EndIf Next Return SetError(1, 0, -1) EndFunc ;==>_GUICtrlListView_GetColumnID_ByName