Jump to content
fatpig

GUICtrlCreatePic beyond 32767 pixels vertical?

Recommended Posts

fatpig

Dear AutoIT Community.

I am currently working on a program that will display lots of images in a scroll down GUI.
I create the GUI based on the number of images, which works fine.
But all images I place using GuiCtrlCreatePic above a threshold of around 32000 pixels (cant say exactly) are placed at negative locations and finally will reach 0 again
and will then populate on top of the images placed there before.

For $i = 1 To $Images[0]
                ; Get picture dimensions
                $hImage = _GDIPlus_ImageLoadFromFile($ImgRep & $Images[$i])
                $iX = _GDIPlus_ImageGetWidth($hImage)
                $iY = _GDIPlus_ImageGetHeight($hImage)
                _GDIPlus_ImageDispose($hImage)
                ; Resize & place images in GUI
                $Pic[$i] = GUICtrlCreatePic($ImgRep & $Images[$i], $Spacer, Round($yPos, 0), $MaxImgWidth, $MaxImgWidth * ($iY / $iX))
                $yPos = $yPos + $MaxImgWidth * ($iY / $iX) + $Spacer
                $log = $log & "|" & $yPos
                $currentlut = $Images[1]
            Next

I have found a limit at 32767 pixels for some GUI elements when googling around.
Can someone tell me how to circumvent that?

thanks!

cheers

Felix

Edited by fatpig

Share this post


Link to post
Share on other sites
Melba23

fatpig,

AutoIt stores the coordinates for controls as an integer with a max size of 32767 - as you have discovered you cannot use coordinates above that value and I cannot think of a simple workaround. Perhaps using tabs so that you can spread the images over several of them?

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______Open Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
fatpig

maybe someone has a good quick way to automatically populate in 2 or more columns?
I currently am not sure on how to achieve that.

Edited by fatpig

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • UEZ
      By UEZ
      Following script shows a parent GUI with a child GUI initialized as MDICHILD.
      #include <Constants.au3> #include <GUIConstantsEx.au3> #include <GuiReBar.au3> #include <GuiScrollBars.au3> #include <GuiToolbar.au3> #include <ScreenCapture.au3> #include <ScrollBarConstants.au3> #include <WindowsConstants.au3> _GDIPlus_Startup() Global Enum $idNew = 1000, $idOpen, $idSave, $idHelper Global Const $iImageW = @DesktopWidth, $iImageH = @DesktopHeight Global Const $hBMP_ScreenCapture = _ScreenCapture_Capture("", 0, 0, $iImageW, $iImageH, False) Global Const $hBitmap = _GDIPlus_BitmapCreateFromHBITMAP($hBMP_ScreenCapture) Sleep(50) Global Const $iW = 1500, $iH = 700, $SC_DRAGMOVE = 0xF012 Global Const $hGUI = GUICreate("Move child GUI within GUI", $iW, $iH) Global Const $hToolbar = _GUICtrlToolbar_Create($hGUI) Global Const $hReBar = _GUICtrlRebar_Create($hGUI, BitOR($CCS_TOP, $RBS_VARHEIGHT, $RBS_AUTOSIZE, $RBS_BANDBORDERS)) Global Const $height_delta = 37 Global Const $idPic = GUICtrlCreatePic("", 0, $height_delta + 2, $iW, $iH) Global $hBitmap_tmp, $hHBitmap_tmp $hBitmap_tmp = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Global $hGfx_Context = _GDIPlus_ImageGetGraphicsContext($hBitmap_tmp) _GUICtrlToolbar_AddBitmap($hToolbar, 1, -1, $IDB_STD_LARGE_COLOR) _GUICtrlToolbar_AddButton($hToolbar, $idNew, $STD_FILENEW) _GUICtrlToolbar_AddButton($hToolbar, $idOpen, $STD_FILEOPEN) _GUICtrlToolbar_AddButton($hToolbar, $idSave, $STD_FILESAVE) _GUICtrlToolbar_AddButtonSep($hToolbar) _GUICtrlToolbar_AddButton($hToolbar, $idHelper, $STD_HELP) _GUICtrlRebar_AddToolBarBand($hReBar, $hToolbar, "", 0) Global Const $iVSscroll = _WinAPI_GetSystemMetrics(2) Global Const $iHSscroll = _WinAPI_GetSystemMetrics(3) Global Const $iYCaption = _WinAPI_GetSystemMetrics(4) Global Const $iYFixedFrame = _WinAPI_GetSystemMetrics(8) Global Const $iXFixedFrame = _WinAPI_GetSystemMetrics(7) Global Const $iMetricsSumX = $iVSscroll + $iXFixedFrame * 2 Global Const $iMetricsSumY = $iHSscroll + $iYCaption + $iYFixedFrame _GUIScrollBars_Init($hGUI) _GUIScrollBars_SetScrollInfoMin($hGUI, $SB_HORZ, 0) _GUIScrollBars_SetScrollInfoMax($hGUI, $SB_HORZ, $iImageW - $iW + 61 + $iMetricsSumX) _GUIScrollBars_SetScrollInfoMin($hGUI, $SB_VERT, 0) _GUIScrollBars_SetScrollInfoMax($hGUI, $SB_VERT, $iImageH - $iH + $iMetricsSumY + $height_delta - 1) GUISetState(@SW_SHOW, $hGUI) Global Const $STM_SETIMAGE = 0x0172 _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hBMP_ScreenCapture)) Global $IE_offset_x = 0, $IE_offset_y = 0 DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) GUIRegisterMsg($WM_HSCROLL, "WM_HSCROLL_IE") GUIRegisterMsg($WM_VSCROLL, "WM_VSCROLL_IE") Global $iPosX_Crop = 0, $iPosY_Crop = 0, $iW_crop = 200, $iH_crop = 200, $bMove_Crop = True Global $hGUI_IE_Crop = GUICreate("", $iW_crop, $iH_crop, $iPosX_Crop, $iPosY_Crop) GUISetStyle(BitOR($WS_BORDER, $WS_POPUP), $WS_EX_MDICHILD) _WinAPI_SetParent($hGUI_IE_Crop, $hGUI) WinSetTrans($hGUI_IE_Crop, "", 0xA0) Global $iLable_CropMove = GUICtrlCreateLabel("", 0, 0, $iW_crop, $iH_crop, -1, $GUI_WS_EX_PARENTDRAG) GUISetState(@SW_SHOW, $hGUI_IE_Crop) GUIRegisterMsg($WM_MOVE, "WM_MOVE_IE_GUI_Crop") ;~ GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN") Do Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch Until False GUIRegisterMsg($WM_HSCROLL, "") GUIRegisterMsg($WM_VSCROLL, "") GUIRegisterMsg($WM_MOVE, "") GUIRegisterMsg($WM_LBUTTONDOWN, "") _WinAPI_DeleteObject($hBMP_ScreenCapture) _GDIPlus_BitmapDispose($hBitmap_tmp) _GDIPlus_BitmapDispose($hBitmap) _GDIPlus_GraphicsDispose($hGfx_Context) _GDIPlus_Shutdown() Exit Func WM_HSCROLL_IE($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $Min, $Max, $Page, $TrackPos ; Get all the horizontal scroll bar information Local $tSCROLLINFO_X = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_HORZ) $Min = DllStructGetData($tSCROLLINFO_X, "nMin") $Max = DllStructGetData($tSCROLLINFO_X, "nMax") $Page = DllStructGetData($tSCROLLINFO_X, "nPage") ; Save the position for comparison later on $IE_offset_x = DllStructGetData($tSCROLLINFO_X, "nPos") $TrackPos = DllStructGetData($tSCROLLINFO_X, "nTrackPos") #forceref $Min, $Max Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Switch $nScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x - $Page) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $IE_offset_x + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO_X, "nPos", $TrackPos) EndSwitch DllStructSetData($tSCROLLINFO_X, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO_X) $IE_offset_x = DllStructGetData($tSCROLLINFO_X, "nPos") DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) $hHBitmap_tmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap_tmp) _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap_tmp)) _WinAPI_DeleteObject($hHBitmap_tmp) $bMove_Crop = False ConsoleWrite($iPosX_Crop & ", " & $iPosY_Crop & " / " & $IE_offset_x & ", " & $IE_offset_y & @CRLF) WinMove($hGUI_IE_Crop, "", -$IE_offset_x + $iPosX_Crop, -$IE_offset_y + $iPosY_Crop) ;~ DllCall("user32.dll", "bool", "MoveWindow", "hwnd", $hGUI_IE_Crop, "int", -$IE_offset_x + $iPosX_Crop, "int", -$IE_offset_y + $iPosY_Crop, "int", $iW_crop, "int", $iH_crop, "bool", True) $bMove_Crop = True Return "GUI_RUNDEFMSG" EndFunc ;==>WM_HSCROLL_IE Func WM_VSCROLL_IE($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $Min, $Max, $Page, $TrackPos ;~ ; Get all the horizontal scroll bar information Local $tSCROLLINFO_Y = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO_Y, "nMin") $Max = DllStructGetData($tSCROLLINFO_Y, "nMax") $Page = DllStructGetData($tSCROLLINFO_Y, "nPage") ; Save the position for comparison later on $IE_offset_y = DllStructGetData($tSCROLLINFO_Y, "nPos") $TrackPos = DllStructGetData($tSCROLLINFO_Y, "nTrackPos") #forceref $Min, $Max Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Switch $nScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y - $Page) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $IE_offset_y + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO_Y, "nPos", $TrackPos) EndSwitch DllStructSetData($tSCROLLINFO_Y, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO_Y) $IE_offset_y = DllStructGetData($tSCROLLINFO_Y, "nPos") DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) $bMove_Crop = False ConsoleWrite($iPosX_Crop & ", " & $iPosY_Crop & " / " & $IE_offset_x & ", " & $IE_offset_y & @CRLF) WinMove($hGUI_IE_Crop, "", -$IE_offset_x + $iPosX_Crop, -$IE_offset_y + $iPosY_Crop) ;~ DllCall("user32.dll", "bool", "MoveWindow", "hwnd", $hGUI_IE_Crop, "int", -$IE_offset_x + $iPosX_Crop, "int", -$IE_offset_y + $iPosY_Crop, "int", $iW_crop, "int", $iH_crop, "bool", True) $bMove_Crop = True Return "GUI_RUNDEFMSG" EndFunc ;==>WM_VSCROLL_IE Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam) _SendMessage($hGUI_IE_Crop, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndFunc ;==>_WM_LBUTTONDOWN Func WM_MOVE_IE_GUI_Crop($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam If $hWnd = $hGUI_IE_Crop And $bMove_Crop Then $iPosX_Crop = _WinAPI_LoWord($lParam) $iPosY_Crop = _WinAPI_HiWord($lParam) EndIf Return "GUI_RUNDEFMSG" EndFunc ;==>WM_MOVE_IE_GUI_Crop Func WM_SIZE_IE_GUI_Crop($hWnd, $iMsg, $wParam, $lParam) Return $GUI_RUNDEFMSG EndFunc ;==>WM_SIZE_IE_GUI_Crop Func DrawImage($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH) _GDIPlus_GraphicsDrawImageRectRect($hGfx_Context, $hBitmap, $IE_offset_x, $IE_offset_y, $iW, $iH, 0, 0, $iW, $iH) $hHBitmap_tmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap_tmp) _WinAPI_DeleteObject(GUICtrlSendMsg($idPic, $STM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap_tmp)) _WinAPI_DeleteObject($hHBitmap_tmp) EndFunc  
      My problem: if you move the child window at left upper corner to another place and move either H or V scrollbar the child GUI will be moved properly. BUT if you have scrolled the scrollbars to the right bottom of the image and move the child GUI to that corner, too then the child GUI jumps if you click on one of the scrollbars.
      Is there something that I didn't consider?
    • Emmhor1
      By Emmhor1
      Hi All,

      MAIN QUESTION:
      Is it possible to Call specific function within a GUI

      So I have a script with multiple functions although I don't want to use every function every time.
      My Idea is to create a simple GUI which allows me to select what functions I want to use then run the funtions by clicking a button.
      I have already made a GUI which allows me to select specific .exe's I would like to run after selection it runs the .exe one by one.
      This script is on my work laptops and cannot access it right now.
       
      Who can help me with this?
      GUIcreate
      Func1 
      Func2
      Func3
      Then have a boxes which allows me to select the specif Func.(I used GUIChecked and Unchecked in my other script)
      Then a button which executes/calls the selected functions
    • Xandy
      By Xandy
      Special thanks: AdmiralAlkex, Melba23, MrCrearoR, Dragon Warrior 3, SDL
      MapIt is a tile world editor.  MapIt was built around the concept of reversing Dragon Warrior map images.  MapIt can take image input and produce a tile and world array.  
      Changing and replacing tile / world data is easy.  B/c tile world editor.

      CTRL+R in image above to signal replace tile action and I use "G" to Get the tile under mouse.
      A full list of hotkeys can be assigned in the: Help Menu\Hotkeys
       
      MapParser is a C++ project that scans images for unique tiles. 
      MapIt can be downloaded without MapParser. MapParser can be toggled off in the Scan_Image dialog. Without MapParser, MapIt will use the Scan_Tiles() function written in AutoIt ; which is 100 * slower Idk. If MapParser.exe will not run for you:      Installing Visual C++ Redistributable for Visual Studio 2015 should fix it: https://www.microsoft.com/en-us/download/details.aspx?id=48145   
      You can start with example world and tiles.
      Example world was made following these steps:
      Started with a tile map image of DragonWarrior3 town of: Reeve From MapIt World Menu \ New \ Scan_Image dialog, I set the area to exclude the key legend to the far right of image. After scanning the map image to world and tile array.  I removed a few of the map artifacts.  More work could be done on this world; removing unwanted tiles, but it is fine for now. I saved my world to disk.  This creates folder: Worldname: Containing folder of Tiles and a Worldname.txt. Using The Gimp, I edited some tiles to have a transparent color: Stairs, Trees, Desk Tables, Chest-of-drawers, Chairs, Signs, Doors, Beds. I changed the world layers to 2: World Menu \ Properties. F9 Finds all selected tile on current layer and changes to a new selected tile on new layer. I used F9 to change all Trees on layer: 0 to Trees on layer: 1. Then I used F9 to change all Trees on layer: 0 to Grass on layer: 0  
      In this video you can see how I used the Tile Menu \ Replace From Disk option to remap tile images to my custom tiles.  Conveniently my tiles already have a transparent pixel.
      See video for how that was done:
      To use the example world:
      First unzip the world save file: http://songersoft.com/programming/mapit/worlds/Reeve_Swapped.zip From the World Menu: choose \Load Navigate to the Reeve_Swapped.txt located in the extracted zip. Or you can scan any image.
      The map images I used are here: http://www.realmofdarkness.net/dq/games/nes/dw3/maps/world
      For download, videos, and example of created world file data; please visit the MapIt webpage: http://songersoft.com/programming/mapit/mapit_about.phtml
    • Blois
      By Blois
      Hi Guis,
       
      I need to create keyboard shortcut to navigate the tabs and activate them, but I could not use the code below:
      #include <TabConstants.au3> #include <WindowsConstants.au3> #include <GuiTab.au3> #include <GUIConstantsEx.au3> HotKeySet("^{TAB}", "_TabRight") HotKeySet("^+{TAB}", "_TabLeft") $gui = GUICreate("test",450, 300) $Tab1 = GUICtrlCreateTab(20, 24, 425, 201) $TabSheet1 = GUICtrlCreateTabItem("Tabsheet 1") $lbContagemGrupos2 = GUICtrlCreateLabel("aaaa", 50, 50) GUICtrlSetColor(-1, 0x0000FF) GUICtrlCreateTabItem("") $TabSheet2 = GUICtrlCreateTabItem(" ") $TabSheet3 = GUICtrlCreateTabItem(" ") GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd Func _TabRight() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos + 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Func _TabLeft() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos - 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Exit  
      can you help me?
    • Pricehacker
      By Pricehacker
      Hello again!
      I have tried searching for quite some time now but couldn´t find a single working way to change the class of your GUI that doesn´t include changing it manually after its compilation.
      First or "AutoIt v3 GUI" is a pretty boring name tbh and i would like to spice it up a bit, also, and more importantly, I would like to identify my windows by something other than its title as it will change depending on some factors and im using two different programs independently as multi threading isn't supported.
      Any help is appreciated! Thank you!
×