Jump to content

API http get request problem - curl/winhttp

Recommended Posts


Hello friends, i have a working curl command that show informations about my account on binance.com, but_it dont work with autoit code without curl.exe.
I want to do it without curl, because the whole process much Slower_ with StdoutRead (I want get the response in variable.)

My Curl command in Autoit:
This 2 are works, but_ i would like to do it without curl.exe

sCommand = @ScriptDir & '\curl.exe -k -H "X-MBX-APIKEY: ' & $apikey & '" -X GET "https://api.binance.com/api/v3/account?' &  $request

the same in .bat  file

curl.exe -k -H "X-MBX-APIKEY: XYZ" -X GET "https://api.binance.com/api/v3/account?timestamp=1514917812000&signature=85bdee77e53cd521e1d5229fbfb459d53799c42b3fa4596d73f1520fad5f965a"

(I use curl with -k option which allows curl to make insecure connections, because there is problem with the sites certificate, (cURL error 60))


I tried many variations, this is the latest... I cant get the same response.
curl $error message (I changed ): {"code":-2015,"msg":"Invalid API-key, IP, or permissions for action."}
autoit version $error message (Response code:400): Mandatory parameter 'timestamp' was not sent, was empty/null, or malformed.


$request = $query & '&signature=' & $signature
$oHTTP = ObjCreate("winhttp.winhttprequest.5.1")
$oHTTP.Open("GET", "https://api.binance.com/api/v3/account", False)
$oHTTP.SetRequestHeader("X-MBX-APIKEY", $apikey)
$oReceived = $oHTTP.ResponseText
$oStatusCode = $oHTTP.Status
If $oStatusCode <> 200 then
 MsgBox(4096, "Response code", $oStatusCode)



Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Ascer
      By Ascer
      Opertation Sys: Win7 x64
      Problem: Connecting to webs using TLS 1.1 +
      Description: WinHttp.WinHttpRequest.5.1 using TLS 1.0 by default, i need higher version to connect into some webs.
      Dim $oHttp = ObjCreate("WinHTTP.WinHTTPRequest.5.1") $oHttp.open ("GET", "https://howsmyssl.com/a/check", False) $oHttp.Option(9) = 128 ; 128 - TLS 1.0, 512 - TLS 1.1, 2048 - TLS 1.2, 2056 - TLS 1.1 & TLS 1.2 $oHttp.Send ConsoleWrite($oHttp.responseText & @CRLF) ; at end of the respond you can check your TLS version. Mine is: {"tls_version":"TLS 1.0","rating":"Bad"} Error: $oHttp.Option works only with parameter 128 (TLS 1.0) other values make error {Bad parameter}
      Additional: I've done this tutorial about enabling TLS in registry: <link>
      Thanks for support.
    • Ascer
      By Ascer
      1. Description.
      oAuth 2.0 is security system implemented by Google a few years ago. You are able to connect into your Google accounts and manage documents. In this UDF i show you how to pass first authorization process., this allow you to automate most of functions using API interface. 2. Requirements.
      Google account. oAuth.au3 Download 3. Possibilities
      ;============================================================================================================ ; Date: 2018-02-10, 14:21 ; ; Description: UDF for authorize your app with oAuth 2.0 Google. ; ; Function(s): ; oAuth2GetAuthorizationCode() -> Get Code for "grant". ; oAuth2GetAccessToken() -> Get "access_token" and "refresh_token" first time. ; oAuth2RefreshAccessToken() -> Get current "access_token" using "refresh_token". ; ; Author(s): Ascer ;============================================================================================================ 4. Enable your Google API.
          4.1. Video Tutorial not mine!
       YouTube     4.2 Screenshots from authorization process (Polish language) 
      Go to https://console.developers.google.com/apis/dashboard and accept current rules.  

      Next create an new project  

      Enter name of you new project and click Create  

      Google will working now, please wait until finish. Next go to enable your API interface, we make if for Google  

      Take "Gmail" in search input and after click in found result.  

      Click Enable interface, Google will working now.  

      Create your login credentials  

      Select Windows Interface (combobox), User credentials (radio) and click button what is need bla bla  

      Type name of a new client id for oAuth 2.0 and click Create a new Client ID.  

      Next configure screen aplication, type some name and click Next. Google will working now.  

      Last step on this website is download source with your credentials in *Json format.  

      Now you received a file named client_id.json, it's how it look in Sublime Text:  

      5. Coding.
      Now we need to call a some function to get access code.  
      #include <oAuth.au3> Local $sClientId = "167204758184-vpeues0uk6b0g4jrnv0ipq5fapoig2v8.apps.googleusercontent.com" Local $sRedirectUri = "http://localhost" oAuth2GetAuthorizationCode($sClientId, $sRedirectUri)  
      Function will execute default browser for ask you to permission.  

      Next Google ask you to permission for access to your personal details by application Autoit   

      Now you can thing is something wrong but all is ok, you need to copy all after  code= . It your access code.  

      Let's now ask Google about our Access Token and Refresh Token  
      #include <oAuth.au3> Local $sClientId = "167204758184-vpeues0uk6b0g4jrnv0ipq5fapoig2v8.apps.googleusercontent.com" Local $sClientSecret = "cWalvFr3WxiE6cjUkdmKEPo8" Local $sAuthorizationCode = "4/AAAPXJOZ-Tz0s6mrx7JbV6nthXSfcxaszFh_aH0azVqHkSHkfiwE8uamcabn4eMbEWg1eAuUw7AU0PQ0XeWUFRo#" Local $sRedirectUri = "http://localhost" Local $aRet = oAuth2GetAccessToken($sClientId, $sClientSecret, $sAuthorizationCode, $sRedirectUri) If Ubound($aRet) <> 4 then ConsoleWrite("+++ Something wrong with reading ResponseText." & @CRLF) Exit EndIf ConsoleWrite("Successfully received data from Google." & @CRLF) ConsoleWrite("access_token: " & $aRet[0] & @CRLF) ConsoleWrite("expires_in: " & $aRet[1] & @CRLF) ConsoleWrite("refresh_token: " & $aRet[2] & @CRLF) ConsoleWrite("token_type: " & $aRet[3] & @CRLF)  
      Important! When you received error 400 and output says: Invalid grant it means that your previous generated access_code lost validity and you need to generate new calling previus code. When everything is fine you should received a 4 informations about your: access_token, expires_in, refresh_token and token_type. Access_Token time is a little short so you need to know fuction possible to refresh it (tell Google that he should generate a new Token for you)  
      #include <oAuth.au3> Local $sRefreshToken = "1/ba8JpW7TjQH3-UI1BvPaXhSf-oTQ4BmZAbBfhcKgKfY" Local $sClientId = "167204758184-vpeues0uk6b0g4jrnv0ipq5fapoig2v8.apps.googleusercontent.com" Local $sClientSecret = "cWalvFr3WxiE6cjUkdmKEPo8" Local $sRedirectUri = "http://localhost" Local $aRet = oAuth2RefreshAccessToken($sRefreshToken, $sClientId, $sClientSecret) If Ubound($aRet) <> 3 then ConsoleWrite("+++ Something wrong with reading ResponseText." & @CRLF) Exit EndIf ConsoleWrite("Successfully received data from Google." & @CRLF) ConsoleWrite("access_token: " & $aRet[0] & @CRLF) ConsoleWrite("expires_in: " & $aRet[1] & @CRLF) ConsoleWrite("token_type: " & $aRet[2] & @CRLF)  
      6. Finish words
      If you followed all this above steps im sure that you received all informations required for coding your Google API (Gmail, Dropbox, YouTube, Calender etc. See next thread: [UDF] Gmail API - Email automation with AutoIt!
    • Ascer
      By Ascer
      1. Description.
      Automate communication with Gmail API using oAuth 2.0 security. 2. Requirements.
      Google Gmail account. Finished Authorization process. Look here 3. Possibilities.
      ;======================================================================================================================== ; Date: 2018-02-12, 11:46 ; ; Bug Fixs: 2018-02-17, 7:31 -> Fixed problems with adding items to array and minor bugs. ; ; Description: UDF for using Gmail API interface. This UDF requires oAuth.au3 and Gmail account. ; ; Function(s): ; gmailUsersGetProfile() -> Information about your account. ; gmailUsersLabelsList() -> Get all available labels ids. ex. "INBOX", "UNREAD" ; gmailUsersLabelsGet() -> Get information about specific label id. ; gmailUsersMessagesBatchDelete() -> Delete many messages emails by id. ; gmailUsersMessagesBatchModify() -> Set status for many messages ex. "INBOX", "UNREAD" ; gmailUsersMessagesDelete() -> Totaly delete email from ur account. ; gmailUsersMessagesGet() -> Get all information about specific email. ; gmailUsersMessagesList() -> Get list of last ~100 emails. ; gmailUsersMessagesModify() -> Modify single message. ; gmailUsersMessagesTrash() -> Put email in trash. ; gmailUsersMessagesUntrash() -> Restore email from trash. ; gmailUsersMessagesSend() -> Send email to single or group recipients. ; gmailUsersMessagesAttachmentsGet() -> Download attachment by id. ; ; Author(s): Ascer ;======================================================================================================================== 4. Downloads.
      oAuth.au3 Gmail API.au3 5. Examples.
      Sending emails
    • islandspapand
      By islandspapand
      Hi All
      i am currently trying to add a function to my project that can send SMS, i have gone with Twilio for the sms service that use a REST API.
      I have never worked with an API before, and could use some help.
      I can get my function working with using cURL.exe and copy past command from the website with the following code. And thats great unfortunately i am have issue with character like æøå when sending a SMS appears like a box or ?. this does not happen if i do it from the website so it looks like a Unicode issue in curl.exe.
      I have done some searching on the forum and understand that i should be able to implement this curl command with the WinHTTP UDF from @trancexx so i don't need a third part exe and it might fix my charater issue.
      Unfortunately i really don't understand how i am to change curl commands to the WinHTTP and i was hoping some good maybe give me an example i could learn from.
      Thanks in advanced
      i have removed the AuthToken number from the script.
      _SendSMS("00000000","SomeOne","SMS body info") Func _SendSMS($SendTo,$SendFrom,$Msgtxt) $AccountSID = "ACbb765b3180d5938229eff8b8f63ed1bc" $AuthToken = "Auth Token number" $Data = '"https://api.twilio.com/2010-04-01/Accounts/'&$AccountSID&'/Messages.json"'& _ '-X POST \ --data-urlencode "To=+45'&$SendTo&'" \ --data-urlencode "From='&$SendFrom&'" \ --data-urlencode "Body='&$Msgtxt&'" \ -u '&$AccountSID&':'&$AuthToken&'' ShellExecute(@ScriptDir&"\curl.exe","-k "&$Data) ;~ curl 'https://api.twilio.com/2010-04-01/Accounts/ACbb765b3180d5938229eff8b8f63ed1bc/Messages.json' -X POST \ ;~ --data-urlencode 'To=+4500000000' \ ;~ --data-urlencode 'From=Reception' \ ;~ --data-urlencode 'Body=Test Body' \ ;~ -u ACbb765b3180d5938229eff8b8f63ed1bc:[AuthToken] EndFunc  

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.