any suggestion to track down, why a script is freezing after a longer run time?
This is a general question, I've checked the common mistakes, I've made so far (inside a loop doing fileopen() without fileclose(), runwait() for progs, that don't terminate, infinite recursive loops etc.)
This script stops just after several days of running...
Is there a direct way to "count" the amount of MEM and handles, a autoit script is using itself, or by child processes?
#include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <TabConstants.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("MyCommands", 406, 236, 610, 129) $Main = GUICtrlCreateTab(8, 8, 385, 217) $TabSheet1 = GUICtrlCreateTabItem("Main") $StopFunc = GUICtrlCreateButton("STOP", 17, 43, 150, 50) GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif") $StartFunc = GUICtrlCreateButton("Start", 17, 98, 150, 50) GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif") $Input0 = GUICtrlCreateInput("Input0", 267, 43, 75, 24, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER)) $Input1 = GUICtrlCreateInput("Input1"", 267, 73, 75, 24, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER)) $Input2 = GUICtrlCreateInput("Input2", 267, 103, 75, 24, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER)) $Input3 = GUICtrlCreateInput("Input3", 267, 133, 75, 24, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER)) $Input4 = GUICtrlCreateInput("Input4", 267, 163, 75, 24, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER)) $Input5 = GUICtrlCreateInput("Input5", 267, 195, 75, 24, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER)) $Label1 = GUICtrlCreateLabel("Label1", 215, 43, 50, 20, $SS_RIGHT) GUICtrlSetFont(-1, 9, 800, 0, "MS Sans Serif") $Label2 = GUICtrlCreateLabel("Label2", 215, 73, 50, 20, $SS_RIGHT) GUICtrlSetFont(-1, 9, 800, 0, "MS Sans Serif") $Label3 = GUICtrlCreateLabel("Label3", 215, 103, 50, 20, $SS_RIGHT) GUICtrlSetFont(-1, 9, 800, 0, "MS Sans Serif") $Label4 = GUICtrlCreateLabel("Label4", 215, 133, 50, 20, $SS_RIGHT) GUICtrlSetFont(-1, 9, 800, 0, "MS Sans Serif") $Label5 = GUICtrlCreateLabel("Label5", 215, 163, 50, 20, $SS_RIGHT) GUICtrlSetFont(-1, 9, 800, 0, "MS Sans Serif") $Label6 = GUICtrlCreateLabel("Label6", 191, 195, 74, 20, $SS_RIGHT) GUICtrlSetFont(-1, 9, 800, 0, "MS Sans Serif") $TabSheet2 = GUICtrlCreateTabItem("Individuals") $Button1 = GUICtrlCreateButton("Button1", 17, 43, 75, 25) GUICtrlCreateTabItem("") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit case $StartBOT letsdothis() Case $StopBOT END_This() EndSwitch WEnd func letsdothis() While 1 ;doing stuff ;doing more stuff if $StopFunc Then END_This() ;how do i detect if the button has been pressed if $Button1 Then Sleepy_Time() ;doing things ;doing more things WEnd EndFunc Func Sleepy_Time() while 1 sleep(10) if $Button1 Then ExitLoop ; detect button press and return to previous state Wend EndFunc Func END_This() Exit EndFunc For the LIFE of me I can't figure out, HOW ON EARTH to detect that a button has been pressed while a function is running?
Can someone PLEASE point me in the right direction???
I have created a form in Koda.
When I want to see a form preview, I choose "Tools", "Run Form".
But in place of a form preview I see a file opened in Notepad (test.au3) with code.
What do I wrong?
I need to has Opt(GUISetOnEvent,-1) available in my script, but since I'm using koda designer it uses GUIgetmessage is there any work around for this. I'm pretty new to this stuff so any help is great appreciated.
As many of you may not be aware, of much about AutoIt's humble beginnings, and aspects related to the first GUI version of AutoIt, I thought it might be nice to create a historical reference here for all the many GUI creators that have been created by various people over the years.
NOTE - While one could argue, that this topic might be better placed in one of the Chat forums, I would argue, that it links to heaps of good code. While much may be redundant in that code, it is still interesting and forms a great perspective. Many are bound to find useful elements at the very least.
Koda, is no doubt the most well-known GUI creator now, but there was a time, when CyberSlug's legendary GUIBuilder (first known as AutoBuilder) ruled the roost, and AutoIt coder's saw it as a Godsend. AutoIt coding was much simpler back then of course.
Below, will be a timeline, of any AutoIt GUI creators listed in forum pages. It will be added to by myself as I find them or as others here find them and place a link in a subsequent post ... PLEASE HELP! Comments welcome too.
(Also note, that this is also intended to include updates, branches etc by others)
Apr 20 2004 - AutoBuilder by CyberSlug.
Sep 27 2004 - An interesting topic, where CyberSlug talks about the future of AutoBuilder (etc) and renaming to GUIBuilder and you see the first mentions and links to updates by others (including myself & livewire).
Nov 05 2004 - A topic where lookfar is working on a SciTE replacement, talks about starting a Form Designer.
Aug 10 2005 - GuiBuilder first update by TheSaint.
Sep 26 2005 - GUIBuilder updates by livewire (he also talks about transferring his efforts to Koda).
Nov 02 2005 - KODA FormDesigner v1.3 by lookfar
Nov 03 2005 - Seemingly interesting topic about forms by tonedeaf
Dec 26 2005 - AutoIt Studio(beta) by BillLuvsU
Jan 09 2006 - AutoBuilder update (or branch) by _^__darkbytez (livewire also posts).
Feb 19 2006 - Koda v1.5 by lookfar
Sep 07 2006 - Koda v184.108.40.206 by Lazycat
Jan 07 2007 - Form/GUI Builder by FlintBrenick
Jun 10 2007 - Gorganizer by _Kurt (more of an assister than actual GUI maker)
Jun 27 2007 - Basic GUI Designer by Mast3rpyr0
May 03 2008 - Autoit Programmer's Desktop (APD) by Ealric
Jul 11 2008 - Gui Designer by Alek
Aug 11 2008 - Gorganizer update by _Kurt
Jun 19 2009 - Easy GUI by Mat
Aug 13 2009 - GUI Script Creator by Pandemic (not sure this qualifies, but it made me think of templates)
Aug 16 2010 - Creation Gui by AZJIO
Jan 22 2012 - ISN AutoIt Studio by ISI360 (includes ISN Form Studio 2, a GUI editor)
Mar 19 2012 - Arduino GUI Programmer by nikosliapis (creates a specific type of GUI)
Aug 01 2012 - GuiBuilder Resurrected update/branch to GUIBuilder by baroquebob
Dec 01 2012 - Form Builder beta (v1.0.6) by BuckMaster
Jan 12 2015 - GUIBuilderNxt update by jaberwacky of GUIBuilder v0.8 (as a new prototype, modified to work with latest AutoIt) (not a update to the Resurrected version)
Aug 12 2016 - The GuiBuilder Return by DFerrato as an update to GUIBuilder,
Jan 17 2017 - GUIBuilder Project by TheSaint (a work in progress based on CyberSlug's original ... and later versions, updated by Roy, TheSaint & others).
There are a significant number of creators/designers that have been started and never completed.
+++++ STILL UNDER CONSTRUCTION +++++
P.S. Well that's it from me tonight. I know of at least one other major creator, but cannot recall it's name or the name of the coder, though I think it starts with 'L'. Bound to be a few I've missed, and some I cannot seem to find their first appearance here (Koda, Form Builder, etc), but there may be an obvious reason for that. Will probably rely on feedback from others now that I've got the ball rolling.
NOTE - If anyone wants to discuss any of these programs above or give some background history, then by all means do so. I will cross-reference (link to) any important comments.