-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By mLipok
I try to download some file with winhttp.au3
I use code from here:
My code looks like:
#include <FileConstants.au3> #include "WinHttp.au3" #AutoIt3Wrapper_Run_AU3Check=N _Example() Func _Example() ; Initialize and get session handle Local $hOpen = _WinHttpOpen() ; Get connection handle Local $hConnect = _WinHttpConnect($hOpen, "https://MY_URL") Local $CurrentOption = _WinHttpQueryOption($hConnect, $WINHTTP_OPTION_SECURITY_FLAGS) Local $Options = BitOR($CurrentOption, _ $SECURITY_FLAG_IGNORE_UNKNOWN_CA, _ $SECURITY_FLAG_IGNORE_CERT_CN_INVALID, _ $SECURITY_FLAG_IGNORE_CERT_DATE_INVALID) _WinHttpSetOption($hConnect, $WINHTTP_OPTION_SECURITY_FLAGS, $Options) If @error Then ConsoleWrite("! ---> @error=" & @error & " @extended=" & @extended & _ " : _WinHttpSetOption" & @CRLF) ; Specify the reguest Local $hRequest = _WinHttpOpenRequest($hConnect, Default, "MY_FILE") ; Send request _WinHttpSendRequest($hRequest) ; Wait for the response _WinHttpReceiveResponse($hRequest) ProgressOn("Downloading", "In Progress...") Progress(_WinHttpQueryHeaders($hRequest, $WINHTTP_QUERY_CONTENT_LENGTH)) Local $sData ; Check if there is data available... If _WinHttpQueryDataAvailable($hRequest) Then While 1 $sChunk = _WinHttpReadData_Ex($hRequest, Default, Default, Default, Progress) If @error Then ExitLoop $sData &= $sChunk Sleep(20) WEnd Else MsgBox(48, "Error", "Site is experiencing problems (or you).") EndIf Sleep(1000) ProgressOff() ; Close handles _WinHttpCloseHandle($hRequest) _WinHttpCloseHandle($hConnect) _WinHttpCloseHandle($hOpen) Local $hFile = FileOpen(@ScriptDir & "\MY_FILE", $FO_OVERWRITE + $FO_CREATEPATH + $FO_BINARY) FileWrite($hFile, $sData) FileClose($hFile) EndFunc ;==>_Example Func Progress($iSizeAll, $iSizeChunk = 0) Local Static $iMax, $iCurrentSize If $iSizeAll Then $iMax = $iSizeAll $iCurrentSize += $iSizeChunk Local $iPercent = Round($iCurrentSize / $iMax * 100, 0) ProgressSet($iPercent, $iPercent & " %") EndFunc ;==>Progress Func _WinHttpReadData_Ex($hRequest, $iMode = Default, $iNumberOfBytesToRead = Default, $pBuffer = Default, $vFunc = Default) __WinHttpDefault($iMode, 0) __WinHttpDefault($iNumberOfBytesToRead, 8192) __WinHttpDefault($vFunc, 0) Local $tBuffer, $vOutOnError = "" If $iMode = 2 Then $vOutOnError = Binary($vOutOnError) Switch $iMode Case 1, 2 If $pBuffer And $pBuffer <> Default Then $tBuffer = DllStructCreate("byte[" & $iNumberOfBytesToRead & "]", $pBuffer) Else $tBuffer = DllStructCreate("byte[" & $iNumberOfBytesToRead & "]") EndIf Case Else $iMode = 0 If $pBuffer And $pBuffer <> Default Then $tBuffer = DllStructCreate("char[" & $iNumberOfBytesToRead & "]", $pBuffer) Else $tBuffer = DllStructCreate("char[" & $iNumberOfBytesToRead & "]") EndIf EndSwitch Local $sReadType = "dword*" If BitAND(_WinHttpQueryOption(_WinHttpQueryOption(_WinHttpQueryOption($hRequest, $WINHTTP_OPTION_PARENT_HANDLE), $WINHTTP_OPTION_PARENT_HANDLE), $WINHTTP_OPTION_CONTEXT_VALUE), $WINHTTP_FLAG_ASYNC) Then $sReadType = "ptr" Local $aCall = DllCall($hWINHTTPDLL__WINHTTP, "bool", "WinHttpReadData", _ "handle", $hRequest, _ "struct*", $tBuffer, _ "dword", $iNumberOfBytesToRead, _ $sReadType, 0) If @error Or Not $aCall[0] Then Return SetError(1, 0, "") If Not $aCall[4] Then Return SetError(-1, 0, $vOutOnError) If IsFunc($vFunc) Then $vFunc(0, $aCall[4]) If $aCall[4] < $iNumberOfBytesToRead Then Switch $iMode Case 0 Return SetExtended($aCall[4], StringLeft(DllStructGetData($tBuffer, 1), $aCall[4])) Case 1 Return SetExtended($aCall[4], BinaryToString(BinaryMid(DllStructGetData($tBuffer, 1), 1, $aCall[4]), 4)) Case 2 Return SetExtended($aCall[4], BinaryMid(DllStructGetData($tBuffer, 1), 1, $aCall[4])) EndSwitch Else Switch $iMode Case 0, 2 Return SetExtended($aCall[4], DllStructGetData($tBuffer, 1)) Case 1 Return SetExtended($aCall[4], BinaryToString(DllStructGetData($tBuffer, 1), 4)) EndSwitch EndIf EndFunc ;==>_WinHttpReadData_Ex
As a result I get file with this contents:
As so far I found this:
So I even with added:
Local $CurrentOption = _WinHttpQueryOption($hConnect, $WINHTTP_OPTION_SECURITY_FLAGS) Local $Options = BitOR($CurrentOption, _ $SECURITY_FLAG_IGNORE_UNKNOWN_CA, _ $SECURITY_FLAG_IGNORE_CERT_CN_INVALID, _ $SECURITY_FLAG_IGNORE_CERT_DATE_INVALID) _WinHttpSetOption($hConnect, $WINHTTP_OPTION_SECURITY_FLAGS, $Options) If @error Then ConsoleWrite("! ---> @error=" & @error & " @extended=" & @extended & _ " : _WinHttpSetOption" & @CRLF)
I still get the same errors.
Anyone know a way how to fix this problem?
Regards,
mLipok
-
By adityaparakh
Hello ,
I am trying to use Websockets in AutoIt.
It is to fetch live stock market prices , API is provided and documentation available for python language.
The link for the code snippet is :
https://symphonyfintech.com/xts-market-data-front-end-api-v2/#tag/Introduction
https://symphonyfintech.com/xts-market-data-front-end-api-v2/#tag/Instruments/paths/~1instruments~1subscription/post
https://github.com/symphonyfintech/xts-pythonclient-api-sdk
Second Link is to subscribe to a list of ExchangeInstruments.
Now I would like to get live stock ltp (LastTradedPrice) for a few stocks whose "ExchangeInstrumentID" I know.
I am able to use the WinHttp object to perform actions using simple codes like below :
I have the secretKey and appkey and can generate the needed token. And get the unique ExchangeInstrumentID.
Below code is just for example of how I am using WinHttp. Unrelated to socket part.
Global $InteractiveAPItoken = IniRead(@ScriptDir & "\Config.ini", "token", "InteractiveAPItoken", "NA") $baseurl = "https://brokerlink.com/interactive/" $functionurl = "orders" $oHTTP = ObjCreate("winhttp.winhttprequest.5.1") $oHTTP.Open("POST", $baseurl & $functionurl, False) $oHTTP.SetRequestHeader("Content-Type", "application/json;charset=UTF-8") $oHTTP.SetRequestHeader("authorization", $InteractiveAPItoken) $pD = '{ "exchangeSegment": "NSEFO", "exchangeInstrumentID": ' & $exchangeInstrumentID & ', "productType": "' & $producttype & '", "orderType": "MARKET", "orderSide": "' & $orderside & '", "timeInForce": "DAY", "disclosedQuantity": 0, "orderQuantity": ' & $qty & ', "limitPrice": 0, "stopPrice": 0, "orderUniqueIdentifier": "' & $orderidentifier & '"}' $oHTTP.Send($pD) $oReceived = $oHTTP.ResponseText $oStatusCode = $oHTTP.Status
But am struggling to understand and use socket.
Would be of great help if you can have a look at the link mentioned above and help with the code sample for AutoIt.
To connect and listen to a socket.
Thanks a lot
-
By Mr_Microphone
Alright, I may be an idiot.
Three years ago, I wrote a program that pushed component information to a secure site via their API. I went back to add some attributes and (here's the idiot part) ended up losing the source code and my modified code does not quite work. I have the compiled version that works minus the new attributes, so I know that their system has not changed. I stripped the larger program down from 3,000 lines to the part that is broken, but I am stumped. This was one of my first scripts, so it heavily leverages examples and isn't as pretty as I'd like it to be.
Be gentle.
The program / script creates a new records as expected, but for some reason, I cannot access information in the response, which I need for a later step.
I use Charles, a web debugging proxy tool so I can see the request and the response and both are as expected. Also, when I write to log file, the JSON reply is exactly what I expect and need, but when I try to do anything with the http body, it seems to be blank.
Here is the script minus the URL and token:
#include <Array.au3> #include <Curl.au3> #include <MsgBoxConstants.au3> #include <json.au3> ; this was added as an alternate way to read the data Global $WM_serial_number = "WM20745001" Global $wm_component_status_id = "10" Global $wm_manufacturer ="Multi-Tech" Global $wm_model = "MTR-LAT1-B07" Global $cellular_carrier_id = "3" Global $iccid_esn = "89010303300012345678" Global $ip_address = "192.168.2.11" Global $NewIDNumber Local $Curl = Curl_Easy_Init() Local $Html = $Curl ; any number as identify Local $Header = $Curl + 1 ; any number as identify Local $HtmlFile = "cURL_Request.html" Local $File = FileOpen($HtmlFile, 2 + 16) Local $Slist = Curl_Slist_Append(0, "content-type: multipart/form-data; boundary=---011000010111000001101001") $Slist = Curl_Slist_Append($Slist, "authorization: Token token=" & $Token) Curl_Easy_Setopt($Curl, $CURLOPT_PROXY, "127.0.0.1") ; needed to use Charles web debugging proxy Curl_Easy_Setopt($Curl, $CURLOPT_PROXYPORT, 8888) ; needed to use Charles Curl_Easy_Setopt($Curl, $CURLOPT_HTTPHEADER, $Slist) ; Curl_Easy_Setopt($Curl, $CURLOPT_URL, $Server & "wireless_module" & "s") Curl_Easy_Setopt($Curl, $CURLOPT_SSL_VERIFYPEER, 0) Curl_Easy_Setopt($Curl, $CURLOPT_TIMEOUT, 30) Curl_Easy_Setopt($Curl, $CURLOPT_WRITEDATA, $Html) Curl_Easy_Setopt($Curl, $CURLOPT_WRITEFUNCTION, Curl_FileWriteCallback()) Curl_Easy_Setopt($Curl, $CURLOPT_WRITEDATA, $File) Local $HttpPost = "" Local $LastItem = "" Curl_FormAdd($HttpPost, $LastItem, $CURLFORM_COPYNAME, "wireless_module" & "[serial_number]", $CURLFORM_COPYCONTENTS, $WM_serial_number, $CURLFORM_END) Curl_FormAdd($HttpPost, $LastItem, $CURLFORM_COPYNAME, "wireless_module" & "[component_status_id]", $CURLFORM_COPYCONTENTS, $wm_component_status_id, $CURLFORM_END) Curl_FormAdd($HttpPost, $LastItem, $CURLFORM_COPYNAME, "wireless_module" & "[manufacturer]", $CURLFORM_COPYCONTENTS, $wm_manufacturer, $CURLFORM_END) Curl_FormAdd($HttpPost, $LastItem, $CURLFORM_COPYNAME, "wireless_module" & "[model]", $CURLFORM_COPYCONTENTS, $wm_model, $CURLFORM_END) Curl_FormAdd($HttpPost, $LastItem, $CURLFORM_COPYNAME, "wireless_module" & "[cellular_carrier_id]", $CURLFORM_COPYCONTENTS, $cellular_carrier_id, $CURLFORM_END) Curl_FormAdd($HttpPost, $LastItem, $CURLFORM_COPYNAME, "wireless_module" & "[iccid_esn]", $CURLFORM_COPYCONTENTS, $iccid_esn, $CURLFORM_END) Curl_FormAdd($HttpPost, $LastItem, $CURLFORM_COPYNAME, "wireless_module" & "[ip_address]", $CURLFORM_COPYCONTENTS, $ip_address, $CURLFORM_END) ; submit Curl_Easy_Setopt($Curl, $CURLOPT_HTTPPOST, $HttpPost) Local $Code = Curl_Easy_Perform($Curl) If $Code = $CURLE_OK Then ConsoleWrite("Content Type: " & Curl_Easy_GetInfo($Curl, $CURLINFO_CONTENT_TYPE) & @LF) ConsoleWrite("Download Size: " & Curl_Easy_GetInfo($Curl, $CURLINFO_SIZE_DOWNLOAD) & @LF) MsgBox(0, 'Html', BinaryToString(Curl_Data_Get($Html))) ; this is something I threw in for debugging, expecting to see SOMETHING. Returns nothing MsgBox(0, 'Header', BinaryToString(Curl_Data_Get($Header))) ; this is something I threw in for debugging, expecting to see SOMETHING. Returns nothing Local $response = Curl_Easy_GetInfo($Curl, $CURLINFO_RESPONSE_CODE) If $response = "409" Then $response = "Failed due to a conflict." If $response = "200" Then $response = "Was NOT created." If $response = "201" Then $response = "Was created." ; read the ID that was assigned and store it $NewIDNumber = StringRight(StringLeft(BinaryToString(Curl_Data_Get($Html)), 10), 4) ; this DID work, but now it doesn't. An old compiled version still works ;~ Global $JsonObject = json_decode($Html); another debugging attempt. Did not use json functions previously and the program worked without it. ;~ Global $NewIDNumber = json_get($JsonObject, '.id') ConsoleWrite(@CRLF &'! id:' & $NewIDNumber & @CRLF & @CRLF) ; debugging feedback MsgBox(0, $response, $wm_serial_number & " new ID = " & $NewIDNumber); debugging feedback If $Code <> $CURLE_OK Then ConsoleWrite(Curl_Easy_StrError($Code) & @LF) Local $Data = BinaryToString(Curl_Data_Get($Curl)) Curl_Easy_Cleanup($Curl) Curl_Data_Cleanup($Curl) Curl_Data_Cleanup($Header) Curl_Data_Cleanup($Html) Curl_FormFree($HttpPost) Curl_slist_free_all($Slist) curl_easy_reset($Curl) FileClose($File) ConsoleWrite(@LF) EndIf This is the captured request (minus the host and token)
POST /api/v2/wireless_modules HTTP/1.1 Host: api. Accept: */* authorization: Token token= Content-Length: 942 Expect: 100-continue content-type: multipart/form-data; boundary=---011000010111000001101001; boundary=------------------------9adb0d87c7ea5061 --------------------------9adb0d87c7ea5061 Content-Disposition: form-data; name="wireless_module[serial_number]" WM20745001 --------------------------9adb0d87c7ea5061 Content-Disposition: form-data; name="wireless_module[component_status_id]" 10 --------------------------9adb0d87c7ea5061 Content-Disposition: form-data; name="wireless_module[manufacturer]" Multi-Tech --------------------------9adb0d87c7ea5061 Content-Disposition: form-data; name="wireless_module[model]" MTR-LAT1-B07 --------------------------9adb0d87c7ea5061 Content-Disposition: form-data; name="wireless_module[cellular_carrier_id]" 3 --------------------------9adb0d87c7ea5061 Content-Disposition: form-data; name="wireless_module[iccid_esn]" 89010303300012345678 --------------------------9adb0d87c7ea5061 Content-Disposition: form-data; name="wireless_module[ip_address]" 192.168.2.11 --------------------------9adb0d87c7ea5061-- and the captured response
HTTP/1.1 201 Created Date: Sun, 04 Apr 2021 00:12:18 GMT Server: Apache Cache-Control: max-age=0, private, must-revalidate Access-Control-Allow-Origin: not-allowed Vary: Accept-Encoding Access-Control-Max-Age: 1728000 X-XSS-Protection: 1; mode=block X-Request-Id: 71cfcf36-6020-48a6-a822-d2b393a27b69 Access-Control-Allow-Credentials: true Access-Control-Allow-Methods: PUT, OPTIONS, GET, POST ETag: W/"25d97fe8a9387cb4b9029a9e62b0bfa2" X-Frame-Options: SAMEORIGIN, SAMEORIGIN X-Runtime: 0.344005 X-Content-Type-Options: nosniff Access-Control-Request-Method: * X-Powered-By: Phusion Passenger 5.2.1 Strict-Transport-Security: max-age=63072000; includeSubDomains; preload Location: /wireless_modules/3195 Status: 201 Created Connection: close Transfer-Encoding: chunked Content-Type: application/json; charset=utf-8 X-Charles-Received-Continue: HTTP/1.1 100 Continue {"id":3195,"model":"MTR-LAT1-B07","serial_number":"WM20745001","manufacturer":"Multi-Tech","mfg_date":null,"iccid_esn":"89010303300012345678","ip_address":"192.168.2.11","purchase_order":null,"supplier":null,"cellular_carrier_id":3,"component_status_id":10,"component_status":{"id":10,"name":"Hold","description":"Available- Held for specific use"},"custom_attributes":[{"name":"Deactivated","type":"Boolean","value":false},{"name":"Port 3001","type":"Boolean","value":false}],"comments":[]}
Also attached is the log file. I need to read the id value. Clearly, it is arriving back to cURL, since it is being written out to the log, but I cannot seem to get to it within the code.
It is established that I may be an idiot, but this idiot has wasted days in non-billable hours trying to figure out what should be a simple glitch.
Help???
cURL_Request.html
-
By Colduction
Hi AutoIt Members and Programmers, i have a problem with Telegram UDF that does not work on some of my servers, Telegram is not restricted in these machines, here is console output in Windows 7 (Server):
>"C:\Program Files (x86)\AutoIt3\SciTE\..\AutoIt3.exe" "C:\Program Files (x86)\AutoIt3\SciTE\AutoIt3Wrapper\AutoIt3Wrapper.au3" /run /prod /ErrorStdOut /in "C:\Users\.NetFramework\Desktop\telegram-udf-autoit-master\tests\Test.au3" /UserParams +>20:20:40 Starting AutoIt3Wrapper (19.1127.1402.0} from:SciTE.exe (4.2.0.0) Keyboard:00000429 OS:WIN_7/Service Pack 1 CPU:X64 OS:X64 Environment(Language:0409) CodePage:0 utf8.auto.check:4 +> SciTEDir => C:\Program Files (x86)\AutoIt3\SciTE UserDir => C:\Users\.NetFramework\AppData\Local\AutoIt v3\SciTE\AutoIt3Wrapper SCITE_USERHOME => C:\Users\.NetFramework\AppData\Local\AutoIt v3\SciTE >Running AU3Check (3.3.14.5) from:C:\Program Files (x86)\AutoIt3 input:C:\Users\.NetFramework\Desktop\telegram-udf-autoit-master\tests\Test.au3 +>20:20:40 AU3Check ended.rc:0 >Running:(3.3.14.5):C:\Program Files (x86)\AutoIt3\autoit3.exe "C:\Users\.NetFramework\Desktop\telegram-udf-autoit-master\tests\Test.au3" +>Setting Hotkeys...--> Press Ctrl+Alt+Break to Restart or Ctrl+BREAK to Stop. Test file for Telegram UDF (https://github.com/xLinkOut/telegram-udf-autoit). This file need a valid ChatID of a Telegram user who has already sent at least a message to the bot, and a valid token given by @BotFather. Insert this data in the source code. "C:\Users\.NetFramework\Desktop\telegram-udf-autoit-master\src\Telegram.au3" (1098) : ==> The requested action with this object has failed.: $oHTTP.Send() $oHTTP^ ERROR ->20:20:41 AutoIt3.exe ended.rc:1 +>20:20:41 AutoIt3Wrapper Finished. >Exit code: 1 Time: 1.56 It's really annoying problem in WinHTTP
-
By nacerbaaziz
goodmorning autoit team
today am comming with some winhttp problems, i hope that you can help me to solve them.
the first problem
is when opening a request
my forums api allow me to delete any post using the api key
all functions work, i mean post / get
but when i tried to use the delete verb it's gave me an html 404 error
here is what am tried
#include "WinHttp.au3" ; Open needed handles Global $hOpen = _WinHttpOpen() Global $hConnect = _WinHttpConnect($hOpen, "xxxxxxxx.com") ; Specify the reguest: Global $hRequest = _WinHttpOpenRequest($hConnect, "Delete", "/vb/Api/posts/10447/?hard_delete=true", default, default) _WinHttpAddRequestHeaders($hRequest, "XF-Api-Key:xxxxx") _WinHttpAddRequestHeaders($hRequest, "XF-Api-User:xxxxx") ; Send request _WinHttpSendRequest($hRequest) ; Wait for the response _WinHttpReceiveResponse($hRequest) Global $sHeader = 0, $sReturned = 0 ; If there is data available... If _WinHttpQueryDataAvailable($hRequest) Then $sHeader = _WinHttpQueryHeaders($hRequest, $WINHTTP_QUERY_CONTENT_DISPOSITION) ;Or maybe: ; $sHeader = _WinHttpQueryHeaders($hRequest, BitOR($WINHTTP_QUERY_RAW_HEADERS_CRLF, $WINHTTP_QUERY_CUSTOM), "Content-Disposition") Do $sReturned &= _WinHttpReadData($hRequest) Until @error msgBox(64, "", $sReturned) endIf ; Close handles _WinHttpCloseHandle($hRequest) _WinHttpCloseHandle($hConnect) _WinHttpCloseHandle($hOpen)
and here is the error message
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>403 Forbidden</title> </head><body> <h1>Forbidden</h1> <p>You don't have permission to access /vb/Api/posts/10447/ on this server.<br /> </p> </body></html>
i hope you can help me
thanks in advance
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now