Jump to content

Need Help..... Trying to Click the box once but if ran again box will not be clicked


Recommended Posts

Here is my script... btw.. I'm VERY new to this and have been trying to get this to work FOREVER... 3 days.... It seems to go through everything alright but clicks the Limited Output no matter what... I'm confused and have run out of ideas... Am I close???

Thanks,..

;-----Configuration-----

Opt("TrayIconHide", 1)

;The title of the sound config window.

Dim $ConfigWindowTitle = "Sounds"

Dim $ConfigWindowTitle2 = "Advanced"

Dim $ConfigWindowTitle3 = "Master"

Global $hGUI

;-----End of configuration----

Run("control mmsys.cpl") ;Run the sound control applet and hide it.

Opt("WinWaitDelay", 500)

WinWaitActive($ConfigWindowTitle)

ControlClick($ConfigWindowTitle, "Ad&vanced...", "Button4", "Sounds")

WinWaitActive($ConfigWindowTitle3)

ControlClick($ConfigWindowTitle3, "&Advanced", "Button3", "Sounds")

WinWaitActive($ConfigWindowTitle2)

ControlClick($ConfigWindowTitle2, "&1 Limited Output", "Button3", "Advanced")

If ControlCommand("$ConfigWindowTitle2", "", "Button3", "IsChecked", "") == 1 Then

ControlClick("$ConfigWindowTitle2","Close","button3","left",1)

ElseIf ControlCommand("$ConfigWindowTitle2", "", "Button3", "IsChecked", "") == 0 Then

ControlClick("$ConfigWindowTitle2","Close","button5","left",1)

Endif

WinClose($ConfigWindowTitle2)

WinClose($ConfigWindowTitle3)

WinClose($ConfigWindowTitle)

;Maximum System Sound Volume

;send("{VOLUME_UP 30}")

;SoundSetWaveVolume(100)

Link to post
Share on other sites

Which Windows version do you use?

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-06-05 - Version 1.5.4.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (NEW 2021-06-14 - Version 1.6.5.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (NEW 2021-07-28 - Version 1.1.0.0) - Download - General Help & Support - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

Remove the quotes around $ConfigWindowTitle2 in all of your Controlxxx function lines. You're looking for a window with the title $ConfigWindowTitle2 instead of looking for the window titled Advanced because you turned your variable into a string.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to post
Share on other sites

Tried to change it and no go... it still checks it off and on....

;-----Configuration-----

Opt("TrayIconHide", 1)

;The title of the sound config window.

Dim $ConfigWindowTitle = "Sounds"

Dim $ConfigWindowTitle2 = "Advanced"

Dim $ConfigWindowTitle3 = "Master"

Global $hGUI

;-----End of configuration----

Run("control mmsys.cpl") ;Run the sound control applet and hide it.

Opt("WinWaitDelay", 500)

WinWaitActive($ConfigWindowTitle)

ControlClick($ConfigWindowTitle, "Ad&vanced...", "Button4", "Sounds")

WinWaitActive($ConfigWindowTitle3)

ControlClick($ConfigWindowTitle3, "&Advanced", "Button3", "Sounds")

WinWaitActive($ConfigWindowTitle2)

ControlClick($ConfigWindowTitle2, "&1 Limited Output", "Button3", "Advanced")

If ControlCommand($ConfigWindowTitle2, "", "Button3", "IsChecked", "") = 1 Then

ControlClick($ConfigWindowTitle2,"Close","button3","left",1)

ElseIf ControlCommand($ConfigWindowTitle2, "", "Button3", "IsChecked", "") = 0 Then

ControlClick($ConfigWindowTitle2,"Close","button5","left",1)

Endif

WinClose($ConfigWindowTitle2)

WinClose($ConfigWindowTitle3)

WinClose($ConfigWindowTitle)

;Maximum System Sound Volume

;send("{VOLUME_UP 30}")

;SoundSetWaveVolume(100)

Link to post
Share on other sites

This script won't run as is, how are you able to test it? The ControlClick commands are written wrong and cause errors when trying to run the script.

C:\AutoItScripts\test.au3(16,67) : ERROR: ControlClick() called with illegal argument 4: "Sounds"

ControlClick($ConfigWindowTitle3, "&Advanced", "Button3", "Sounds")

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^

C:\AutoItScripts\test.au3 - 3 error(s), 0 warning(s)

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...