Jump to content
Sign in to follow this  
Queener

Need help in replacing string

Recommended Posts

Queener

I'm pretty sure that I have this file except it doesn't have an extension. This code returns an error:

 

$Dummies = @ScriptDir & "\Dummies"
$sFind = "109.99.99.99"
$sReplace = "No Longer Use"
    if FileExists($Dummies) Then
        _ReplaceStringInFile($Dummies,$sFind ,$sReplace)
    Else
        MsgBox(0, "Error", "Make sure Dummies file exist before you proceed to compile this project.")
        Return
    EndIf

 

If it has an extension then it's ok, but if it doesn't have an extension then it returns an error msgbox that I created. Any help is appreciated.

 

EDIT: I figured... I didn't show the extension. So it was Dummies.txt all along.

Edited by asianqueen

Msgbox(0, "Hate", "Just hate it when I post a question and find my own answer after a couple tries. But if I don't post the question, I can't seem to resolve it at all.")

Share this post


Link to post
Share on other sites
iamtheky

works just fine.  Are you sure it is there, and it does not have an extension?

 

and to clean up the above, which again works fine.

#include<file.au3>

$Dummies = @ScriptDir & "\Dummies"
$sFind = "109.99.99.99"
$sReplace = "No Longer Use"
    If FileExists($Dummies) Then
        _ReplaceStringInFile($Dummies,$sFind ,$sReplace)
    Else
        MsgBox(0, "Error", "Make sure Dummies file exist before you proceed to compile this project.")
    EndIf

 

  • Like 1

,-. .--. ________ .-. .-. ,---. ,-. .-. .-. .-.
|(| / /\ \ |\ /| |__ __||| | | || .-' | |/ / \ \_/ )/
(_) / /__\ \ |(\ / | )| | | `-' | | `-. | | / __ \ (_)
| | | __ | (_)\/ | (_) | | .-. | | .-' | | \ |__| ) (
| | | | |)| | \ / | | | | | |)| | `--. | |) \ | |
`-' |_| (_) | |\/| | `-' /( (_)/( __.' |((_)-' /(_|
'-' '-' (__) (__) (_) (__)

Share this post


Link to post
Share on other sites
Queener

yeah it worked great... I have a new question; it's not an issue this time...

Is it possible to find the string and add additional strings below it? Not replacing it...


Msgbox(0, "Hate", "Just hate it when I post a question and find my own answer after a couple tries. But if I don't post the question, I can't seem to resolve it at all.")

Share this post


Link to post
Share on other sites
iamtheky
_ReplaceStringInFile($Dummies,$sFind ,$sFind & @CRLF & $sReplace)

 

  • Like 1

,-. .--. ________ .-. .-. ,---. ,-. .-. .-. .-.
|(| / /\ \ |\ /| |__ __||| | | || .-' | |/ / \ \_/ )/
(_) / /__\ \ |(\ / | )| | | `-' | | `-. | | / __ \ (_)
| | | __ | (_)\/ | (_) | | .-. | | .-' | | \ |__| ) (
| | | | |)| | \ / | | | | | |)| | `--. | |) \ | |
`-' |_| (_) | |\/| | `-' /( (_)/( __.' |((_)-' /(_|
'-' '-' (__) (__) (_) (__)

Share this post


Link to post
Share on other sites
Queener

exactly what I needed...

Thank you so much for the previous info. It was pretty useful.

Edited by asianqueen

Msgbox(0, "Hate", "Just hate it when I post a question and find my own answer after a couple tries. But if I don't post the question, I can't seem to resolve it at all.")

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • mistersquirrle
      By mistersquirrle
      Hello!
       
      I wrote myself a script to follow Google Maps Polyline encoding steps: https://developers.google.com/maps/documentation/utilities/polylinealgorithm, and that works (although I think that it's a bit janky), but now I'm having issues getting the output.
       
      When I run the script, all the points come out correctly in the console, and even when they're the only things that I log, it displays them fine. However, I'm adding each point into a variable to return all of them at once at the end, fully formatted, and it's only taking the very first point. I can't figure out what I'm doing wrong, as it seems fine.
       
      When run with the default value, it should output this at the end: Custom Polygon: _p~iF~ps|U_ulLnnqC_mqNvxq`@
      But instead I'm just getting this: Custom Polygon: _p~iF
       
      I know that it's reaching the string combination lines because it's logging the data before it (and even if a put log AFTER the $sPolygon &= $aPoints[0], it's logged fine).
       
      Here's my full code (problem is lines ~209 - 234, search "$sPolygon &= $aPoints[1]"):
      #include <Array.au3> #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> _PolyGUI() Func _PolyGUI() #Region ### START Koda GUI section ### Form= $hInputGUI = GUICreate("Lat Long encoder", 403, 301, 192, 124) GUISetFont(8, 400, 0, "Consolas") GUICtrlCreateLabel("Input polygon points here, format as:", 8, 8, 263, 19) GUICtrlSetFont(-1, 10, 800, 0, "Consolas") GUICtrlCreateLabel("Lat Long - Single point", 8, 24, 142, 17) GUICtrlCreateLabel("Lat Long, Lat Long, Lat Long - Multiple points", 8, 40, 280, 17) Local $sPoints = GUICtrlCreateEdit("", 8, 64, 385, 201, BitOR($ES_WANTRETURN, $WS_VSCROLL)) GUICtrlSetData(-1, "38.5 -120.2, 40.7 -120.95, 43.252 -126.453") GUICtrlSetFont(-1, 10, 400, 0, "Consolas") $bOK = GUICtrlCreateButton("bOK", 16, 272, 123, 25) GUICtrlSetFont(-1, 12, 800, 0, "Consolas") $bCancel = GUICtrlCreateButton("bCancel", 304, 272, 75, 25) GUICtrlSetFont(-1, 12, 800, 0, "Consolas") GUISetState(@SW_SHOW, $hInputGUI) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $bCancel Exit Case $bOK $sPoints = GUICtrlRead($sPoints) GUISetState(@SW_HIDE, $hInputGUI) _GetPoly($sPoints, True) ExitLoop EndSwitch Sleep(10) WEnd EndFunc ;==>_PolyGUI ;https://developers.google.com/maps/documentation/utilities/polylinealgorithm ;https://app.dsmobileidx.com/api/DescribeSearchForLinkId?linkId=469787 ; Note that this will only really work inside the US (this side of the World), as it's assuming any negative is the Longitude ;https://gist.github.com/ismaels/6636986 - decoder ;Using: 41.83162 -87.64696 ; Expected: sfi~F np}uO ; Actual: sfi~f np}uo ; If we remove 32 from the last ASCII code, since the last bit chunk is 0, we get the correct case/ characters ; We need to run this logic back through all the indexes though and do this to all that that <= 63 ;LinkId=469787 ; Expected: q{`aHpa_iVi[kp@}`Aa{@e[eCoqBbAyc@iRy{@g_@mz@|gA{eAh~@Vf~Etv@gB~p@gQ`^yg@~p@ekAldA{KfFxIrJ^pO~Mtl@dPrJnUz[nSpo@wf@fc@yw@n@ob@ ; Actual: s{`aHpa_iVg[kp@}`Aa{@g[gCmqBbA{c@iRy{@e_@kz@|gA{eAh~@Td~Evv@gB|p@gQb^wg@|p@ekAndA{KfFvIpJ`@rO~Mrl@dPrJnU|[lSpo@wf@dc@yw@n@mb@ ; I assume that this is because of bad data, the points have repeating 9's and 0's, which looks fishy. The polygon is (very) close, but not quite the same. Func _GetPoly($sPoints, $bLog = False) Local $timer = TimerInit(), $sConsole[11] Local $sPolygon = "" ; Step 1, take the initial signed value: Local $aCoords = StringRegExp($sPoints, "(-*?\d*\.\d*) (-*?\d*\.\d*)", 3), $aPoints[2] ;~ _ArrayDisplay($aCoords) If $bLog Then _Log(_ArrayToString($aCoords)) For $c = 0 To (UBound($aCoords) - 1) Step 2 ;~ If $bLog Then _Log($c) If $c = 0 Then $aPoints[0] = $aCoords[$c] $aPoints[1] = $aCoords[$c + 1] Else $aPoints[0] = $aCoords[$c] - $aCoords[$c - 2] $aPoints[1] = $aCoords[$c + 1] - $aCoords[$c - 1] EndIf If $bLog Then _Log("- Step 1, take the initial signed value:") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf ; Step 2, multiply each by 1e5, and round $aPoints[0] = Round($aPoints[0] * 1e5, 0) $aPoints[1] = Round($aPoints[1] * 1e5, 0) If $bLog Then _Log("- Step 2, multiply each by 1e5, and round") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf ; Step 3, convert Decimal to Binary, using two's complement for negatives. Padded to 32 bits $aPoints[0] = _NumberToBinary($aPoints[0]) $aPoints[1] = _NumberToBinary($aPoints[1]) If $bLog Then _Log("- Step 3, convert Decimal to Binary, using two's complement for negatives. Padded to 32 bits") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf ; Step 4, left-shifted 1 bit $aPoints[0] = StringTrimLeft($aPoints[0], 1) & "0" $aPoints[1] = StringTrimLeft($aPoints[1], 1) & "0" If $bLog Then _Log("- Step 4, left-shifted 1 bit") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf ; Step 5, if negative, invert binary If $c = 0 Then If $aCoords[$c] < 0 Then $aPoints[0] = _InvertBinary($aPoints[0]) If $aCoords[$c + 1] < 0 Then $aPoints[1] = _InvertBinary($aPoints[1]) Else If $aCoords[$c] - $aCoords[$c - 2] < 0 Then $aPoints[0] = _InvertBinary($aPoints[0]) If $aCoords[$c + 1] - $aCoords[$c - 1] < 0 Then $aPoints[1] = _InvertBinary($aPoints[1]) EndIf If $bLog Then _Log("- Step 5, if negative, invert binary") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf Local $aChunks[2][6], $0x20 For $i = 0 To 1 $0x20 = "1" ; This is out BitOR flag, 0x20 BitOR'd onto our 5-bit chunks is always 1*****, except the last chunk $sConsole[5] = "" ; Clearing console variables $sConsole[6] = "" $sConsole[7] = "" $sConsole[8] = "" $sConsole[9] = "" For $j = 0 To 5 ;There will always be 6 chunks ; Step 6 & 7, break into 5-bit chunks, and reverse order $aChunks[$i][$j] = StringTrimLeft($aPoints[$i], StringLen($aPoints[$i]) - 5) ; This splits into 5-bit chunks in reverse order, doing 6 & 7 in one operation ;~ If $bLog Then _Log(" " & $aPoints[$i]) ;~ If $bLog Then _Log(" " & StringLen($aPoints[$i])) ;~ If $bLog Then _Log(" " & StringTrimLeft($aPoints[$i], StringLen($aPoints[$i]) - 5)) ;~ If $bLog Then _Log(" " & $aChunks[$i][$j]) ; Here we consume the original binary string, so the next loop gets the correct next 5-bit chunk $aPoints[$i] = StringTrimRight($aPoints[$i], 5) $sConsole[5] &= $aChunks[$i][$j] & " " ; Once consumed, if the remaining length isn't enough for another bit chunk, switch 0x20 to 0 (no following chunks) If StringLen($aPoints[$i]) <= 5 Then $0x20 = "0" ; Step 8, BitOR 100000 (0x20) to our 5-bit chunks (effectively) $aChunks[$i][$j] = $0x20 & $aChunks[$i][$j] $sConsole[7] &= $aChunks[$i][$j] & " " ; Step 9, converting the chunk from Binary back to Decimal $aChunks[$i][$j] = _BinaryToDec($aChunks[$i][$j]) $sConsole[8] &= $aChunks[$i][$j] & " " ; Step 10, adding 63 to decimal values $aChunks[$i][$j] += 63 $sConsole[9] &= $aChunks[$i][$j] & " " If StringLen($aPoints[$i]) < 5 Then ExitLoop Next If $bLog Then _Log("- Step 6 & 7 (part " & $i & "), break into 5-bit chunks, and reverse order") _Log(" " & $sConsole[5]) _Log("- Step 8 (part " & $i & "), BitOR 100000 (0x20) to our 5-bit chunks (effectively)") _Log(" " & $sConsole[7]) _Log("- Step 9 (part " & $i & "), converting the chunk from Binary back to Decimal") _Log(" " & $sConsole[8]) _Log("- Step 10 (part " & $i & "), adding 63 to decimal values") _Log(" " & $sConsole[9]) EndIf Next Local $aASCII[0] For $i = 0 To 1 Dim $aASCII[0] ; Reset ASCII array For $j = 0 To (UBound($aChunks, 2) - 1) ; For both chunk sets ReDim $aASCII[UBound($aASCII) + 1] ; Add an index for the ASCII array If $aChunks[$i][$j] = "" Or $aChunks[$i][$j] <= 63 Then ; If the chunk is not useful $l = $j For $k = $l To 1 Step -1 If $aChunks[$i][$k] = "" Or $aChunks[$i][$k] <= 63 Or $aASCII[$k] <= 63 Then $aASCII[$k - 1] -= 32 If $aASCII[$k - 1] <= 63 Then _ArrayDelete($aASCII, $k - 1) Else ExitLoop EndIf Next ExitLoop EndIf $aASCII[$j] = Int($aChunks[$i][$j]) Next ;Step 11, convert each value to ASCII equivalent For $k = UBound($aASCII) - 1 To 0 If $aASCII[$k] <= 63 Or $aASCII[$k] = "" Then ReDim $aASCII[UBound($aASCII) - 1] Else ExitLoop EndIf Next $aPoints[$i] = StringFromASCIIArray($aASCII, 0, -1, 0) Next If $bLog Then _Log("- Step 11, convert each value to ASCII equivalent, finished") If $aCoords[$c] <= 0 Then ;@CRLF & " " & If $bLog Then _Log($aPoints[1]) _Log($aPoints[0]) _Log("Next set") EndIf $sPolygon &= $aPoints[1] $sPolygon &= $aPoints[0] Else If $bLog Then _Log($aPoints[0]) _Log($aPoints[1]) _Log("Next set") EndIf $sPolygon &= $aPoints[0] $sPolygon &= $aPoints[1] EndIf Next If $bLog Then _Log("Custom Polygon: " & $sPolygon) _Log(TimerDiff($timer) & @CRLF) EndIf Return $sPolygon EndFunc ;==>_GetPoly Func _NumberToBinary($iNumber) Local $sBinString = "" ; Maximum 32-bit # range is -2147483648 to 2147483647 If $iNumber < -2147483648 Or $iNumber > 2147483647 Then Return SetError(1, 0, "") ; Convert to a 32-bit unsigned integer. We can't work on signed #'s $iUnsignedNumber = BitAND($iNumber, 0x7FFFFFFF) ; Cycle through each bit, shifting to the right until 0 Do $sBinString = BitAND($iUnsignedNumber, 1) & $sBinString $iUnsignedNumber = BitShift($iUnsignedNumber, 1) Until Not $iUnsignedNumber ; Was it a negative #? Put the sign bit on top, and pad the bits that aren't set If $iNumber < 0 Then Return '1' & StringRight("000000000000000000000000000000" & $sBinString, 31) ; Always return 32 bit binaries If StringLen($sBinString) < 32 Then Return StringRight("0000000000000000000000000000000" & $sBinString, 32) Return $sBinString EndFunc ;==>_NumberToBinary Func _BinaryToDec($sBinary) Local Const $aPower[8] = [128, 64, 32, 16, 8, 4, 2, 1] Local $iDec If StringRegExp($sBinary, "[0-1]") Then If StringLen($sBinary) < 8 Then Do $sBinary = "0" & $sBinary Until StringLen($sBinary) = 8 EndIf $aBinary = StringSplit($sBinary, "", 2) For $i = 0 To UBound($aBinary) - 1 ;~ $aBinary[$i] = $aBinary[$i] * $aPower[$i] $iDec += $aBinary[$i] * $aPower[$i] Next Return $iDec Else Return SetError(0, 0, "Not a binary string") EndIf EndFunc ;==>_BinaryToDec Func _InvertBinary($iNumber) ;~ ConsoleWrite(@CRLF & $iNumber) Local $sNumber $aNumber = StringSplit($iNumber, "") For $i = 1 To $aNumber[0] If $aNumber[$i] = 0 Then $aNumber[$i] = 1 ElseIf $aNumber[$i] = 1 Then $aNumber[$i] = 0 Else Return SetError(0, 0, "Not a binary number") EndIf $sNumber &= String($aNumber[$i]) Next Return $sNumber EndFunc ;==>_InvertBinary Func _Log($data) ;~ Local Static $LogEnable = True ConsoleWrite(@CRLF & @HOUR & ":" & @MIN & "." & @SEC & " " & $data) LogData(@HOUR & ":" & @MIN & "." & @SEC & " " & $data, "logs/LOGFILE.txt") EndFunc ;==>_Log Func LogData($text, $File = "logs/LOGFILE.txt") Global $LogFile = "" If $LogFile = "" Then $LogFile = FileOpen($File, 9) OnAutoItExitRegister(CloseLog) EndIf FileWriteLine($LogFile, $text) EndFunc ;==>LogData Func CloseLog() If $LogFile <> "" Then _Log("Closing LoD script" & @CRLF) FileClose($LogFile) EndIf EndFunc ;==>CloseLog  
      I've tried:
      $sPolygon &= $aPoints[0] & $aPoints[1] ;---- $sPolygon = $sPolygon & $aPoints[0] & $aPoints[1] ;---- $sPolygon = $sPolygon & String($aPoints[0] & $aPoints[1]) ;---- $sPolygon = String($sPolygon) & String($aPoints[0]) & String($aPoints[1]) ;---- $sPolygon &= $aPoints[1] $sPolygon &= $aPoints[0] ;----  
      I'm sure it's something basic that I'm overlooking, but I don't understand why it's not combining the strings. 
      Also, unrelated, why doesn't $LogFile = FileOpen($File, 9) create the directory/ file if they don't exist? 9 should be $FO_CREATEPATH (8) + $FO_APPEND (1)?
      Thanks!
    • careca
      By careca
      This is another take on string triggers, triggers on specific strings.
      Able to simple text pasting,
      opening links (as long as there's a www. http:\\ or https:\\ at the beggining)
      and is able to open applications.
      The user selects the modifier key, and then uses a combination of that key with a couple others to perform tasks like
      screenshot the active window, (modkey + prtscr), turn off the screen (modkey + pause / break),
      open clipboard string in registry (modkey + R), change system volume (modkey + arrouw up/dn).
      The following keys pressed at the same time prompt for shutdown: S+D+T
      The following keys pressed at the same time prompt for restart: S+R+T
      Middle mouse button click on titlebar minimizes to tray, or a left mouse button click in the icon in the tray also minimizes.
      Trigger is set off by space or enter, and timeouts after 3 seconds.
      Shows your external, lan, and gateway ip's, can refresh with right mouse click, and opens the default browser if the correspondent button is pressed.
      Able to change system volume by a set percentage, reading from the inputbox the number the user sets, if 0 or empty uses system default.
      I made this because the existing string trigger applications didn't do it for me for a number of reasons.
      I did this for me, but if someone finds it useful all the better.
    • WoodGrain
      By WoodGrain
      Hi All,
      I'd like to replace 'COMMA' with ',' for example:
      $myString = "COMMA" StringRegExpReplace($myString, 'COMMA', ',') Now I've tried escaping the ',' in various ways unsuccessfully, such as:
      '[,]'
      "[,]"
      '\,'
      [,] seems to work in the pattern, I just can't figure out how to use it in the replace, and it seems everyone online is only interested in removing/replacing commas lol.
      I also tried creating and using a variable as the replacement but also didn't work:
      $myComma = "," $myString = "COMMA" StringRegExpReplace($myString, 'COMMA', $myComma) I'm sure it's super simple if someone could point me in the right direction - thanks.
    • kartune
      By kartune
      Hello, I am getting this error message when running my script:
      Case $aButiD[0] To $aButiD[$iTotButtons - 1]
      Case ^ ERROR
      Error:  Array variable has incorrect number of subscripts or subscript dimension range exceeded.
       
      The script's purpose is to read my ini file and create buttons for the sections and section contents.
      The first part of the script creates buttons for the sections of the ini, once you click on the section button it should open another set of buttons of all the contents under the section
      In this case, the section in the .ini file is called "TPA"
      on the Func flavorco()
      It opens the contents of "TPA" into buttons.
      Right now, the section it is reading is determined by $sSection.
      It is only when I try to change $sSection = "TPA"
      to
      $sSection = $flavorco
      that the error starts to appear
       
      Here is the script
      #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <ButtonConstants.au3> $optbar = IniReadSectionNames("test.ini") If Not IsArray($optbar) Then Exit Local $Button[UBound($optbar) - 1] $mGUI = GUICreate('Restock Flavor Ingredients', 10 + (130 * UBound($optbar)), 100) For $x = 1 To UBound($optbar) - 1 $var = IniReadSection("test.ini", $optbar[$x]) If @error Then ContinueLoop $X_Coord = 10 + (($x - 1) * 100) $Button[$x - 1] = GUICtrlCreateButton($optbar[$x], $X_Coord, 30, 70, 30) Next GUISetState() While 1 $mMsg = GUIGetMsg() If $mMsg = $GUI_EVENT_CLOSE Then GUIDelete($mGUI) ExitLoop EndIf For $i = 0 To UBound($Button) - 1 If $mMsg = $Button[$i] Then MsgBox(0, '$Msg = ' & $mMsg, GuiCtrlRead($Button[$i]) & ' Pressed', 2) Global $flavorco = $Button ; sets the flavor company's variable Call('flavorco') EndIf Next WEnd Func flavorco() ;opened flavor company's flavors MsgBox(0, '$Msg = ' & $mMsg, GuiCtrlRead($Button[$i]) & $flavorco, 0) Local $sFilePath = @ScriptDir & "\Test.ini" Local $sSection = $Button Local $aArray = IniReadSection($sFilePath, $sSection) _ArrayDelete($aArray, 0) ;_ArrayDisplay($aArray) Local $iIndex Local $iTotButtons = UBound($aArray) Local $iNumPerRow = 5 Local $iButWidth = 100 Local $iButDepth = 30 Local $aButiD[$iTotButtons] Local $hGUI = GUICreate('Ingredients Stock "' & $sFilePath & '"', 10 + ($iButWidth + 10) * $iNumPerRow, _ 10 + Ceiling($iTotButtons / $iNumPerRow) * ($iButDepth + 10), -1, $WS_EX_TOPMOST) For $i = 0 To $iTotButtons - 1 ; $x = $iXBorder + (($iRectWidth + $iSpacing) * Mod($i, $iNumCols)) $x = 10 + (($iButWidth + 10) * Mod($i, $iNumPerRow)) ; $y = $iYBorder + (($iRectDepth + $iSpacing) * Int($i / $iNumCols)) $y = 10 + (($iButDepth + 10) * Int($i / $iNumPerRow)) $aButiD[$i] = GUICtrlCreateButton($aArray[$i][0], $x, $y, $iButWidth, $iButDepth) ;, $BS_NOTIFY) Next GUISetState(@SW_SHOW) While 1 $msg = GUIGetMsg() Switch $msg Case $GUI_EVENT_CLOSE GUIDelete($hGUI) ExitLoop Case $aButiD[0] To $aButiD[$iTotButtons - 1] ;clicking on a flavor name $iIndex = ($msg - $aButiD[0]) $RSINGRflavor = $aArray[$iIndex][0] ;flavor name $RSINGRml = $aArray[$iIndex][1] ; ml $RSINGRgal = $aArray[$iIndex][1]*0.000264172 ;converts ml to gal Call('openflavor') EndSwitch WEnd EndFunc Func openflavor() #Region ### START Koda GUI section ### Form=F:\Karl\AutoIt\FJ-Stock JP\GUI Forms\RSINGRSUBFORM.kxf ;opens flavor to view stock and restock submit $RSINGRSUBFORM = GUICreate($sSection & " " & $RSINGRflavor, 242, 213, 530, 269) $RSINGRFlavorTitle = GUICtrlCreateLabel($sSection & " " & $RSINGRflavor, 32, 8, 200, 28) GUICtrlSetFont(-1, 16, 800, 0, "MS Sans Serif") $RSINGRstockcaption = GUICtrlCreateLabel("Current Stock in ml:", 16, 48, 96, 17) $RSINGRstockml = GUICtrlCreateLabel($RSINGRml, 120, 48, 114, 25) GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif") $RSINGRInput = GUICtrlCreateInput("ml", 40, 112, 153, 21) $RSINGRSUBMIT = GUICtrlCreateButton("SUBMIT", 16, 152, 81, 33) $RSINGRCLOSE = GUICtrlCreateButton("CLOSE", 145, 151, 81, 33) $RSINGRgalcaption = GUICtrlCreateLabel("Current Stock in gal:", 16, 80, 97, 17) $RSINGRstockgal = GUICtrlCreateLabel($RSINGRGAL, 120, 80, 114, 25) GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### ; $msg = "" While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE GUIDelete($RSINGRSUBFORM) ExitLoop Case $RSINGRCLOSE GUIDelete($RSINGRSUBFORM) ExitLoop EndSwitch WEnd EndFunc  
      Any help is much appreciated!  Thanks.
      My guess is that $Button isn't an actual string??  Whenever I use msgbox it shows up the string exactly, no numbers attached.  So i'm not sure whats going on here.
    • XinYoung
      By XinYoung
      Hello again,
      I'm trying to use the FileMove function to rename a bunch of text files.
      Some of the files have "_1" at the end of their name, for example, "File123_1.txt". I want to remove the "_1" so it would become "File123.txt".
      What I currently have...
              FileMove($sSource & "\*_1.txt", $sDestination & "\*.txt")
      But since I'm using a wildcard, it doesn't appear to be working. I think it's just replacing .txt with .txt. Am I going about this the wrong way? How can I use wildcards and still accomplish this?
      Any help is greatly appreciated ^__^
×