# MouseClick doesn't seem to always be in the right place

## Recommended Posts

I've got a simple little script that is trying to step through data in a datagrid.  I have written and rewritten this thing to try and keep it running, but it just keeps coming up with values I just don't think it can get.  I've played with the timing and it seems to run a little better when slowed down, but setting my $delay higher and higher gets me less and less improvement, but starts to really drag the process to a crawl. Removing the sleeps entirely isn't even that bad. Every time I send a ^C to copy a value, I verify it, and then when I'm done with it, I reset the Clipboard with a known value that will never show in my data and reverify the clipboard. So either my reset/verification is not doing it's job or my mouse double click is not getting the coordinates updated. Neither of these options are great because I'm running out of ideas how to make sure I get what I want. About all I can do at this point is attempt my copy, then validate that the clipboard isn't my reset string, isn't zero length, and THEN match it to a date REGEX to see if it's the data from the correct column. That would be triple checking something that shouldn't need to be checked once. Scrip and output below: $desiredDate = "2/9/2015"
$yCoord = 290$yStep = 15
$recDisplay = 9 ;number of rows to read before starting to scroll$totalRec = 0
$PONList = ""$delay = 250
$dcDelay = 12$count = 0
$clipReset = "chicken"$oCoastal = WinActivate("Find FOC")
WinWaitActive($oCoastal) if @error Then msgBox(1, "winactivate error", @error) Exit endif AutoItSetOption("MouseCoordMode", 0) AutoItSetOption("SendKeyDownDelay", 100) ClipPut("") While 1 ;get date ;MouseMove(284,$yCoord, 1)
MouseClick("left", 284, $yCoord, 2,$dcDelay)
Sleep($delay) while 1 MouseClick("left", 284,$yCoord, 2, $dcDelay) ;Sleep($delay)
Send("^c")
;Sleep($delay)$thisDate = clipGet()

if StringCompare($thisDate,$clipReset) <> 0 and StringLen($thisDate) > 0 Then resetClip($clipReset)
ExitLoop
EndIf
WEnd

ConsoleWrite($count & ": Date: " &$thisDate)

;check date matches what we want
;if not StringCompare($desiredDate,$thisDate) = 0 Then  ;with some date functions, this could be improved to a date range
if StringRegExp($thisDate,$desiredDate) = 0 Then ;just check to see if the desired date exists inside what was copied
;we have reached the end of our records
MsgBox(1, "Found " & $totalRec & " total records",$PONList)
Exit ;or exitloop
endif

;get pon
;MouseMove(81, $yCoord, 1) MouseClick("left", 81,$yCoord, 2, $dcDelay) Sleep($delay)

While 1
MouseClick("left", 81, $yCoord, 2,$dcDelay)
;Sleep($delay) Send("^c") ;Sleep($delay)
$thisPON = clipGet() if StringCompare($thisPON, $clipReset) <> 0 and StringLen($thisPON) > 0 Then
resetClip($clipReset) ExitLoop EndIf WEnd ConsoleWrite(" PON:" &$thisPON & @CRLF)

;Check if we want this record
if StringCompare(StringMid($thisPON, 10, 1), "D") = 0 Then ;We want this record!$totalRec += 1
$PONList =$PONList & ", " & $thisPon EndIf if$recDisplay >= 1 Then
;still in the first 10 records and need to move the mouseclick position down by a record
$yCoord +=$yStep
$recDisplay -= 1 Else ;reached the bottom of the data grid and need to click the down arrow in the bottom right of the grid to advance one record MouseClick("left", 650, 438,1) ;Sleep($delay)
endIf
;consolewrite($recDisplay & @CRLF)$count += 1
Wend

func resetClip($val = "") Do ClipPut($val)
Until StringCompare(ClipGet(), $val) = 0 EndFunc And here's a sample output. Everything looks great until the last row. This was not the last row in the data and should not have stopped here, but you can see the PON is either still on the clipboard, or the mouse click did not update the coordinates and copied the MouseClick commands didn't move to the coordinates: 0: Date: 2/9/2015 PON:173714357INN0001 1: Date: 2/9/2015 PON:173708683DID0001 2: Date: 2/9/2015 PON:173708683DID0003 3: Date: 2/9/2015 PON:173546121INN0001 4: Date: 2/9/2015 PON:173701848INN0001 5: Date: 2/9/2015 PON:173454114INN0001 6: Date: 2/9/2015 PON:173708683DID0002 7: Date: 2/9/2015 PON:173714373DID0001 8: Date: 2/9/2015 PON:173709684INN0001 9: Date: 2/9/2015 PON:173621964INN0001 10: Date: 2/9/2015 PON:173710242CHC0001 11: Date: 2/9/2015 PON:855440C 12: Date: 2/9/2015 PON:173531625INN0001 13: Date: 2/9/2015 PON:173717963DID0001 14: Date: 2/9/2015 PON:173717560DID0001 15: Date: 2/9/2015 PON:173713978DID0001 16: Date: 2/9/2015 PON:173710221INN0001 17: Date: 2/9/2015 PON:173713002INN0001 18: Date: 2/9/2015 PON:173456352RGN0001 19: Date: 2/9/2015 PON:173712598DID0001 20: Date: 2/9/2015 PON:173709807DID0001 21: Date: 2/9/2015 PON:173616984INN0001 22: Date: 2/9/2015 PON:173646606INN0001 23: Date: 2/9/2015 PON:173649988INN0002 24: Date: 2/9/2015 PON:173712524INR0001 25: Date: 2/9/2015 PON:173710904DID0001 26: Date: 2/9/2015 PON:173717004INN0001 27: Date: 2/9/2015 PON:173712871INN0001 28: Date: 2/9/2015 PON:173426776RGN0001 29: Date: 2/9/2015 PON:173418924RGN0001 30: Date: 2/9/2015 PON:173712465INR0001 31: Date: 2/9/2015 PON:173712465INR0002 32: Date: 2/9/2015 PON:173712524INR0002 33: Date: 2/9/2015 PON:173710788INR0001 34: Date: 2/9/2015 PON:173710788INR0002 35: Date: 2/9/2015 PON:173712737DID0001 36: Date: 2/9/2015 PON:173717129INN0001 37: Date: 2/9/2015 PON:173718061DID0001 38: Date: 2/9/2015 PON:173717663INN0001 39: Date: 2/9/2015 PON:173718181DID0001 40: Date: 2/9/2015 PON:173714071DID0001 41: Date: 2/9/2015 PON:173692375INN0002 42: Date: 173692375INN0002 Edited by mitchelwb #### Share this post ##### Link to post ##### Share on other sites If you want any sort of accuracy, you will stay away from the generic functions like MouseClick, or ClipGet. Use, ControlGetText instead...or if you are using a browser, use a browser specific function. As always, specifics help, tell us what you are attempting to do, and on what. Side note...winwaitactive, with no timeout param, will never return an @error value. In fact, it doesn't return any @error. It will also never exit that function until a window matching is active. Make sure to read the help file for each function to see what they do. Anyways, you ControlClick, or if it's a browser, _IeAction with action=click. Edited by jdelaney IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window. #### Share this post ##### Link to post ##### Share on other sites I wish this was a browser. The data grid I'm trying to pull data from is in a custom built proprietary app that I think was built using Power Builder. There are two of us working on this and I'm forced to access the app in Citrix (The other guy has a desktop version of it but isn't having much more success). So if the problem is in using generic version of mouseclick and clipget, what's the alternative? #### Share this post ##### Link to post ##### Share on other sites Use the AutoIt spy tool. Focus on the control you are manipulating, and then go to the summary tab and post that. (delete any sensitive info) IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window. #### Share this post ##### Link to post ##### Share on other sites I'm using Citrix to access the app. I only get the title, handle, and coordinates of the window. the other guy using a desktop version gets a few more values when clicking on the datagrid, but nothing of use. I know that's not a very helpful answer, but we've tried using the spy tool to find any advantage we can and there just isn't anything more than a single control handle. There are no controls or handles inside the data grid. If I can get a copy of the Summary tab, I will, but I've got to find a solution ASAP and it may be sometime tomorrow at best before I can get a copy of what he's getting. I honestly don't think it'll be of any help though. #### Share this post ##### Link to post ##### Share on other sites Do keyboard commands do anything? Can you ControlSend copy commands to grab row data or cell data? Do arrows keys do anything? Edited by jdelaney IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window. #### Share this post ##### Link to post ##### Share on other sites I can navigate up and down the data grid one row at a time with the up and down arrows, but I can't navigate through the data. if I double click to select a value and press down, it moves to the next row, but does not stay focused on the column I was on. So I have to do the double click on every cell that I want to read a value from. That's the only way to get the cell I need selected. Once the cell is selected, double clicking again will highlight a word portion of the value.. In both cases, this is ok. On the date field, there is a time stamp, but I don't need it and the space between the date and timestamp means that when I double click that coordinate, I only highlight the date. On the PON field, that's the only value and it's a solid string, so double clicking it highlights the entire PON. Sending a ^a does not work. I've tried using arrow keys and shiftdown and up to try and collect it, but it runs too much risk of losing focus and highlighting the whole row and causing it to scroll wildly horizontally. I did some more testing and basically came to the conclusion that my mouseclicks aren't always getting done. Even though I send two sets of double clicks (one to select the field, one to highlight the data) I still often don't get a new value. I'm outputting the value of my clipboard before getting the new value and it's definitely getting cleared, so it's a matter of my mouse clicks just aren't getting placed correctly by Autoit, or that the application is not registering them (or not fast enough) This is the most recent version that is running and actually seems fairly bulletproof, but it sure seems like I'm having to do a lot of work just to get it to do what it's supposed to do. You may be able to sense my frustration in the code. Global$desiredDate = "2/9/2015"
Global $yCoord = 290 Global$yStep = 15
Global $recDisplay = 9 ;number of rows to read before starting to scroll Global$totalRec = 0
Global $PONList = "" Global$delay = 250
Global $dcDelay = 12 Global$count = 0
Global $clipReset = "chicken" Global$pattern = "\d+\/\d+\/\d+"

$oCoastal = WinActivate("Find FOC") WinWaitActive($oCoastal)

if @error Then
msgBox(1, "winactivate error", @error)
Exit
endif

AutoItSetOption("MouseCoordMode", 0)
AutoItSetOption("SendKeyDownDelay", 100)

ClipPut("")

While 1
;get date
MouseClick("left", 284, $yCoord, 2,$dcDelay)
sleep($delay)$thisDate = getMouseDCVal(284, $yCoord,$dcDelay, $pattern) ConsoleWrite($count & ": Date: " & $thisDate) ;check date matches what we want if StringRegExp($thisDate, $desiredDate) = 0 Then ;just check to see if the desired date exists inside what was copied ;we have reached the end of our records MsgBox(1, "Found " &$totalRec & " total records", $PONList) Exit ;or exitloop endif ;get pon MouseClick("left", 81,$yCoord, 2, $dcDelay) Sleep($delay)

$thisPON = getMouseDCVal(81,$yCoord, $dcDelay,$pattern, false)

ConsoleWrite(" PON:" & $thisPON & @CRLF) ;Check if we want this record if StringCompare(StringMid($thisPON, 10, 1), "D") = 0 Then
;We want this record!
$totalRec += 1$PONList = $PONList & ", " &$thisPon
EndIf

if $recDisplay >= 1 Then ;still in the first 10 records and need to move the mouseclick position down by a record$yCoord += $yStep$recDisplay -= 1
Else
;reached the bottom of the data grid and need to click the down arrow in the bottom right of the grid to advance one record
MouseClick("left", 650, 438,1)
endIf
$count += 1 Wend func resetClip($val = "")
Do
ClipPut($val) Until StringCompare(ClipGet(),$val) = 0
Do
ClipPut($val) Until StringCompare(ClipGet(),$val) = 0
Do
ClipPut($val) Until StringCompare(ClipGet(),$val) = 0
Local $damnyou = ClipGet() ConsoleWrite(" ~" &$damnyou & "~  ")
EndFunc

Func getMouseDCVal($xPos,$yPos, $mcDelay,$matchPattern, $equalsPattern = true) Local$copyVal = ""

while 1
MouseClick("left", $xPos,$yCoord, 2, $mcDelay) Send("^c")$copyVal = clipGet()

$matchResult = StringRegExp($copyVal, $matchPattern) if not then if$matchResult = 1 Then
$matchResult = 0 Else$matchResult = 1
EndIf

if StringCompare($copyVal,$clipReset) <> 0 and StringLen($copyVal) > 7 and$matchResult The
endifn
resetClip($clipReset) return$copyVal
EndIf
WEnd

EndFunc

##### Share on other sites
func resetClip($val = "") Do ClipPut($val)
Until StringCompare(ClipGet(), $val) = 0 Do ClipPut($val)
Until StringCompare(ClipGet(), $val) = 0 Do ClipPut($val)
Until StringCompare(ClipGet(), $val) = 0 Local$damnyou = ClipGet()
ConsoleWrite("  ~" & $damnyou & "~ ") EndFunc That is just ridiculous. func resetClip($val = "")
Do
ClipPut($val) Sleep(10) Until ClipGet() ==$val
EndFunc

Should suffice.

If you are having trouble with that not doing what it is supposed to then it suggests some other app is using the clipboard

Edited by JohnOne

Monkey's are, like, natures humans.

##### Share on other sites

When you are in a cell, you can do a Control+A to select all the text, right?  If you can do that, then you can fairly accurately grab data.  The less you have to use mouseclicks, the better.  Use the Arrow keys to navigate.

IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window.

##### Share on other sites
func resetClip($val = "") Do ClipPut($val)
Until StringCompare(ClipGet(), $val) = 0 Do ClipPut($val)
Until StringCompare(ClipGet(), $val) = 0 Do ClipPut($val)
Until StringCompare(ClipGet(), $val) = 0 Local$damnyou = ClipGet()
ConsoleWrite("  ~" & $damnyou & "~ ") EndFunc That is just ridiculous. func resetClip($val = "")
Do
ClipPut($val) Sleep(10) Until ClipGet() ==$val
EndFunc

Should suffice.

If you are having trouble with that not doing what it is supposed to then it suggests some other app is using the clipboard

You're darn right it's ridiculous.  But I was at my wits end trying to make it work like I expected.  And I didn't know if it was a clipboard issue or if it was a click issue.  I knew it wasn't something else using the clipboard though because the value that kept coming up was the previous value I had copied.  I knew that block of code was just dumb, but at least I felt it was pretty safe to assume I had reset the clipboard.  And outputting the value to the console proved it.  I was definitely getting the clipboard reset.  I think the problem was with the clicks.

##### Share on other sites

When you are in a cell, you can do a Control+A to select all the text, right?  If you can do that, then you can fairly accurately grab data.  The less you have to use mouseclicks, the better.  Use the Arrow keys to navigate.

that's just it.  Ctrl-A didn't work.  a double click would set focus on the cell, but ctrl-A did not select all.  I could right click on it and Select All was an option, but even on the right click menu, there were no hot keys.  So the option was either to double click a second time to highlight, or to right click and then calculate a second location for another left click to get Select All.

Believe me, we tried absolutely every key combo we could think of to get it to highlight and let us select fields without having to do the mouse clicks but it just wasn't gonna happen.

When I added the regex match to verify that we were pulling the right data, that seemed to finally make it solid.  What I think was happening was that the app UI just wasn't keeping up.  It acted like it had a bad memory leak.  After a fresh reboot, it would run pretty snappy, but within 15 minutes, it would drag.  Popping up the next windows that we needed to go in to when we came across records that needed to be inspected would get slower and slower.  To the point that they sometimes took up to 30 seconds before they would pop up.  And it would take an entire reboot, not just restarting the app to get it flowing again.  And so I think what was happening was that the script we were running was sending the double-click and the UI just wasn't updating.  Even after the second set of double clicks, if the UI still hadn't updated and the copy command was sent, it copied what had previously been highlighted.  That's why I was working so hard to clear the clipboard, I had to prove it was either the clicks or the clipboard, and I couldn't otherwise prove it was the clicks.

##### Share on other sites

If I were you, I'd write a completely new app to do whatever it is that this lousy app is doing.

You are using it so you obviously know what it does.

Edited by JohnOne

Monkey's are, like, natures humans.

##### Share on other sites

If I were you, I'd write a completely new app to do whatever it is that this lousy app is doing.

You are using it so you obviously know what it does.

if only that were an option. I'm working as a consultant for another company and we're trying to extract data using this terrible system because we can't get direct access to the data.  It would be much easier to do this with a SQL query.

##### Share on other sites

Then is it the memory that's leaking? look at it in device manager.

Does it only do this when automated, and not when manually operating?

Monkey's are, like, natures humans.

##### Share on other sites

we watched the task manager, but being under the gun, we only did it briefly.  The app itself didn't grow, but there was one generic process that did seem to keep growing.  It never really seemed like it grew to a critical size though.

There was more to it than just this piece though.  In the script that I've posted, we were just looking for the records.  When we found them there was a whole series of steps that had to be done in this app, one of which included another data grid just like the one we were fighting with here.  the deeper we would get in to that process, the more it slowed down as well.  I only posted asking about this portion because the rest of the process had actual control handles we could work with except for the other data grid, but then it was just the same as this logic.

##### Share on other sites

Well it all sounds like complete madness, consultant or not, I'd consult them that they're being stupid in pursuing this course.

Monkey's are, like, natures humans.

## Create an account

Register a new account

• ### Similar Content

• Can﻿not find example how to locate taskbar icon coordinates or position by window handle.
I want to use PixelChecksum to check only rectangle area over specified taskbar item.
What I already have found and succesfully run for whole taskbar area:
$taskbar = WinGetHandle("[Class﻿:Shell_TrayWnd]")$taskbarPos = WinGetPos($taskbar)$tasklistPos = ControlGetPos($taskbar, "", "[CLASS:﻿MSTaskListWClass; INSTANCE:1]")$iOldCheckSum = PixelChecksum($taskbarPos[0] +$tasklistPos[0], $taskbarPos[1] +$tasklistPos[1], $taskbarPos[0] +$tasklistPos[2], $taskbarPos[1] +$tasklistPos[3]);
I know also that I can pass window handle as parameter to PixelChecksum, but don't know how to do this with taskbar icon.

Also I was able to find something similar but seems outdated: WatchWindows

__

• Hi All,
I am trying to login into our application using AutoIT. When I launch the application a splash screen appears and the login screen goes behind it. At this point the script pauses and I loose control of everything. I have literally tried everything for the past two days but nothing has worked yet. Any suggestions would be appreciated.
RunWait("\\mchsv411.siplaceworld.net\splmshare\int00\conf\start_apps\windows\start_nx110.bat en portal_client int00 tc112", "", @SW_MAXIMIZE)
AutoItSetOption("SendKeyDelay", 200)
MouseClick("left", @DesktopWidth / 2, @DesktopHeight / 2)
The splash screen has title "Teamcenter" and is static.
I tried to click on the center to get control of login window.
I have tried WinActivate, WinSetState, ControlCommand and a lot of other things.
• By lonardd
Hi,
I have a very strange problem concerning MouseClick function.
I need to start Control Panel, navigate it on the Display Section (Adjust screen resolution link), click on it, and from the next Dialog choose Intel Graphic tool tab and navigate into it when it opens.
I wasn't using MouseClick() at first when I tried to use Control IDs, but I was fed up with the Autoit Window Info poor and inaccurate info (It flickers and the moment I click on the control the control ID and class disappear) so I ended up choosing the easiest way.
The code I'm posting worked OK until two weeks ago, the mouse clicks were accurately performed and the Script reached the end with no errors...and I was happy.
All of a sudden, between one try and the other, I noticed the cursor not flying exactly where it was supposed to, namely to the Control Panel ->Display->Adjust screen resolution link   but it clicked some 30 pixels below and some 30 pixels to the left, choosing obviously and undesired function and from that point it screwed the whole thing up. And from that moment onward, it seems I can no longer regain the mouse to click on that sequence.
Could it be because my Control Panel ->Display form moved slightly from one test to another and therefore I got that small offside?
If you believe this is the reason, I should then re position the Control Panel ->Display window to 0,0 and recalculate all the clicks.
do you have a suggestion?

Thanks a lot
Dave

RotateDisplays.au3
• By c1one
Something simple enough, and I am sure it's an oversight, but I have not been able to track this down. The entire script is attached, but here is the point of failure.
Note: I am getting the "Error: subscript used on non-accessible variable" but I thought the initial line of:
AutoItSetOption('MouseCoordMode', 0)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
; Install updates (minimized and updating for many minutes)
; Wait for updates to complete
WinWait("ProSeries Update")
; Wait just over 9 minutes to ensure popup is ready (test alternative to WinWait)
Sleep(550000)
; Set focus on Product Licenses window
WinActivate("ProSeries Update")
; Send Mouse Click to Install Now button
MouseClick ( "left" [, 581, 362 [, clicks = 1 [, speed = 10]]] )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Thanks for any insights!
c1one
ProSeries2017_No_Customer_Info.au3
Hi!
I have a button where I need to close it!
I was doing through  clicking same position in screen but there are some id's that have different sizes.
What are the possible ways to click this closable button?
Is there a way to close it through id? Is there a way to get it's position through it's ID?

×

• Wiki

• Back

• #### Beta

• Git
• FAQ
• Our Picks
×
• Create New...