Jump to content
Sign in to follow this  
UEZ

GDI+ Rotating Earth build 2017-03-17

Recommended Posts

1 minute ago, JohnOne said:

the pacific ocean looks just a tad too big.

That's what Magellan said too!:lol:

Share this post


Link to post
Share on other sites

Added v1.5: cloud layer for a slightly better 3D look.

Added v1.6: moon orbiting earth without rotation animation 

 

Runs at ~9-10 fps on my system. 

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Wonderful script UEZ, would look nice with a spaceship and/or meteors floating by.

Would it be too difficult to add these?

Thanks again

Mehomic

Share this post


Link to post
Share on other sites
12 minutes ago, Mehomic said:

Wonderful script UEZ, would look nice with a spaceship and/or meteors floating by.

Would it be too difficult to add these?

Thanks again

Mehomic

Well, the script runs at lower FPS, for me around 10 FPS, and thus it makes no sense to add more fx. To fasten up the script I've to change to DirectX or OpenGL - GDI+ is too slow. :(

 


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites
1 hour ago, Lakes said:

A Freebasic version? :)

Yes, but same speed because of slow GDI+ calls. Currently working on adding additional FX which doesn't cost too much FPS...


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites
13 hours ago, UEZ said:

----Well, the script runs at lower FPS, for me around 10 FPS.....

the moon takes about a little more than 27 days (see orbital period) to make a tour around the earth, then, 10 fps, should be more than enough .... :P


small minds discuss people average minds discuss events great minds discuss ideas.... and use AutoIt....

Share this post


Link to post
Share on other sites
8 minutes ago, Chimp said:

the moon takes about a little more than 27 days (see orbital period) to make a tour around the earth, then, 10 fps, should be more than enough .... :P

Further more a rotation of earth takes also approx. 24h... :D


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

@Mehomic I added two little fx - more is not possible without decreasing earth display quality and FPS rate.

 

Btw, this is the last update.


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By UEZ
      Here a little script to load a TGA image file and create a GDI+ bitmap. Currently supported TGA formats are  1/8/15/16/24 and 32-bit but no support for RLA compressed images.
      As it is written completely in AutoIt, it might take some time to convert larger 8/24-bit images. ☕
       
      _GDIPlus_TGAImageLoadFromFile:
      ;Coded by UEZ #AutoIt3Wrapper_UseX64=n #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <WinAPIFiles.au3> ; #FUNCTION# ==================================================================================================================== ; Name ..........: _GDIPlus_TGAImageLoadFromFile ; Description ...: Loads an uncompressed TGA image file (1/8/15/16/24/32-bit) and converts it to a GDI+ bitmap format. ; Syntax ........: _GDIPlus_TGAImageLoadFromFile($sFile[, $bPrintInfo = False.]) ; Parameters ....: $sFile - TGA file name to load from disk. ; $bPrintInfo - [optional] Prints some information about the TGA image to console. Default is False. ; Return values .: Success: GDI+ bitmap handle ; Failure: error 1 - file cannot be opened ; error 2 - TGA image is not in one of these formats: 1/8/15/16/24/32-bit ; error 3 - unsupported TGA image type ; error 4 - unable to read file to struct ; error 5 - unknown TGA pixel depth ; error 6 - return bitmap cannot be created ; Version .......: v0.70 build 2019-10-07 beta ; Author ........: UEZ ; Remarks .......: No RLE compressed TGA image support yet! 8/24-bit images might be slow on converting ^^ ; Related .......: _GDIPlus_BitmapCreateFromScan0, _GDIPlus_ImageRotateFlip, DllStructCreate, _WinAPI_CreateFile, _WinAPI_SetFilePointer ; Link ..........: https://www.loc.gov/preservation/digital/formats/fdd/fdd000180.shtml, http://www.fileformat.info/format/tga/egff.htm ; Example .......: Yes ; =============================================================================================================================== Func _GDIPlus_TGAImageLoadFromFile($sFile, $bPrintInfo = False) Local Const $hFile = _WinAPI_CreateFile($sFile, 2, 2) If Not $hFile Then Return SetError(1, 0, 0) Local Const $tagTGAHeader = "align 1;byte idLength;byte colormapType;byte imageType;word firstEntryIndex;word colormapLength;byte colormapEntrySize;word xOrigin;word yOrigin;word width;word height;byte pixelDepth;byte imageDescriptor" Local Const $tagTGAFooter = "dword extAreaOffset;dword devDirOffset;byte imageID[18]" Local Const $tagTGAExtention = "align 1;word extSize;byte authorName[41];byte authorComments[324];word timeM;word timeD;word timeY;word timeHr;word timeMin;word timeSec;byte jobName[41];word jobTimeHr;word jobTimeMin;word jobTimeSec;byte swID[41];word swVersionNr;byte swVersionLetter;long keyColor;word pxAspectRatioNum;word pxAspectRatioDom;word gammaNum;word gammaDom;dword colCorrOffset;dword postStampOffset;dword scanLineOffset;byte attribType" Local Const $tTGAHeader = DllStructCreate($tagTGAHeader) Local Const $tTGAFooter = DllStructCreate($tagTGAFooter) Local Const $tTGAExtention = DllStructCreate($tagTGAExtention) Local $dwBytesRead, $tTGAImageID, $tagTGAImageID _WinAPI_ReadFile($hFile, $tTGAHeader, DllStructGetSize($tTGAHeader), $dwBytesRead) If $tTGAHeader.idLength > 0 Then $tagTGAImageID = "byte imageID[" & $tTGAHeader.idLength & "]" $tTGAImageID = DllStructCreate($tagTGAImageID) _WinAPI_ReadFile($hFile, $tTGAImageID, $tTGAHeader.idLength, $dwBytesRead) EndIf Local Const $iPxDepth = $tTGAHeader.pixelDepth If Not BitOR($iPxDepth = 32, $iPxDepth = 24, $iPxDepth = 16, $iPxDepth = 15, $iPxDepth = 8, $iPxDepth = 1) Then _WinAPI_CloseHandle($hFile) Return SetError(2, 0, 0) EndIf #cs ImageType Image Data Type Colormap Encoding 0 No image data included in file No No 1 Colormapped image data Yes No 2 Truecolor image data No No 3 Monochrome image data No No 9 Colormapped image data Yes Yes 10 Truecolor image data No Yes 11 Monochrome image data No Yes #ce If Not BitOR($tTGAHeader.imageType = 0x01, $tTGAHeader.imageType = 0x02, $tTGAHeader.imageType = 0x03) Then _WinAPI_CloseHandle($hFile) Return SetError(3, 0, 0) EndIf Local $iW = $tTGAHeader.width, $iH = $tTGAHeader.height, $bytesPerPixel = $iPxDepth / 8, $colorwidth = $tTGAHeader.colormapEntrySize / 8, _ $pitch = $tTGAHeader.colormapLength * $colorwidth If $tTGAHeader.colormapEntrySize < 24 Then $bytesPerPixel = 4 Local Const $dwBufferSize = Ceiling($iW * $iH * $bytesPerPixel) Local $tSrcBmp = DllStructCreate("byte color[" & $dwBufferSize + $pitch & "]") _WinAPI_ReadFile($hFile, $tSrcBmp, $dwBufferSize + $pitch, $dwBytesRead) _WinAPI_SetFilePointer($hFile, -26, $FILE_END) _WinAPI_ReadFile($hFile, $tTGAFooter, 26, $dwBytesRead) Local $sFooter = StringTrimRight(BinaryToString($tTGAFooter.imageID), 1), $iOffset = 0, $iOffset2 If Not StringCompare($sFooter, "TRUEVISION-XFILE.") Then ;read extension information to struct if available $iOffset = $tTGAFooter.extAreaOffset _WinAPI_SetFilePointer($hFile, $iOffset, $FILE_BEGIN) _WinAPI_ReadFile($hFile, $tTGAExtention, 0x01EF, $dwBytesRead) EndIf _WinAPI_CloseHandle($hFile) If $dwBytesRead = 0 Then Return SetError(4, _WinAPI_GetLastError(), 0) If $bPrintInfo Then ConsoleWrite("idLength: " & $tTGAHeader.idLength & @CRLF) ConsoleWrite("colormapType: " & $tTGAHeader.colormapType & @CRLF) ConsoleWrite("imageType: " & $tTGAHeader.imageType & @CRLF) ConsoleWrite("firstEntryIndex: " & $tTGAHeader.firstEntryIndex & @CRLF) ConsoleWrite("colormapLength: " & $tTGAHeader.colormapLength & @CRLF) ConsoleWrite("colormapEntrySize: " & $tTGAHeader.colormapEntrySize & @CRLF) ConsoleWrite("xOrigin: " & $tTGAHeader.xOrigin & @CRLF) ConsoleWrite("yOrigin: " & $tTGAHeader.yOrigin & @CRLF) ConsoleWrite("width: " & $tTGAHeader.width & @CRLF) ConsoleWrite("height: " & $tTGAHeader.height & @CRLF) ConsoleWrite("pixelDepth: " & $iPxDepth & @CRLF) ConsoleWrite("imageDescriptor: " & $tTGAHeader.imageDescriptor & @CRLF) If $tTGAHeader.idLength > 0 Then ConsoleWrite("ImageID: " & RemoveNullChars($tTGAImageID.imageID) & @CRLF) If $iOffset Then ConsoleWrite("authorName: " & RemoveNullChars($tTGAExtention.authorName) & @CRLF) ConsoleWrite("authorComments: " & RemoveNullChars($tTGAExtention.authorComments) & @CRLF) ConsoleWrite("jobName: " & RemoveNullChars($tTGAExtention.jobName) & @CRLF) ConsoleWrite("swID: " & RemoveNullChars($tTGAExtention.swID) & @CRLF) EndIf EndIf Local Static $tDestBmp ;must be static otherwise bitmap data might get corrupted or in worst case script will crash Local $stride, $iPixelFormat Switch $iPxDepth Case 1 ;1-bit $iPixelFormat = $GDIP_PXF01INDEXED $stride = BitAND(($iW * 1) + 1, BitNOT(1)) $tDestBmp = DllStructCreate("byte color[" & $stride * $iH & "];") Case 8, 24 $iPixelFormat = $GDIP_PXF24RGB $stride = BitAND(($iW * 3) + 3, BitNOT(3)) $tDestBmp = DllStructCreate("byte color[" & $stride * $iH & "];") Case 15, 16 $iPixelFormat = $GDIP_PXF16RGB555 $stride = BitAND(($iW * 2) + 2, BitNOT(2)) $tDestBmp = DllStructCreate("byte color[" & $stride * $iH & "];") Case 32 $iPixelFormat = $GDIP_PXF32ARGB $stride = $iW * 4 $tDestBmp = DllStructCreate("byte color[" & $stride * $iH & "];") Case Else Return SetError(5, 0, 0) EndSwitch If Mod($stride, 4) <> 0 Then $stride += 4 - Mod($stride, 4) Local Const $hBitmap = _GDIPlus_BitmapCreateFromScan0($iW, $iH, $iPixelFormat, $stride, $tDestBmp) If @error Or Not $hBitmap Then Return SetError(6, @error, 0) Local $x, $x1, $y, $r, $g, $b, $a, $t1, $t2, $t3, $t4, $col, $red, $green, $blue Local Const $hDLL = DllOpen("msvcrt.dll") Switch $iPxDepth Case 1 ;1-bit For $y = 0 To $iH - 1 $t1 = $y * $stride DllCall($hDLL, "ptr:cdecl", "memcpy", "ptr", DllStructGetPtr($tDestBmp) + $t1, "ptr", DllStructGetPtr($tSrcBmp) + BitShift($t1, 3), "uint", $stride) Next Case 8 ;8-bit ;if a color table is available, just use it If $tTGAHeader.colormapType = 1 Then Local $tMapColorTbl = DllStructCreate("byte bgr[" & $pitch & "]", DllStructGetPtr($tSrcBmp, "color") + $tTGAHeader.firstEntryIndex) For $y = 0 To ($iH - 1) $iOffset = $y * $iW $iOffset2 = $y * $stride For $x = 0 To ($iW - 1) $t1 = $iOffset2 + $x * 3 $t2 = $tSrcBmp.color($iOffset + $x + $pitch + 1) * $colorwidth Switch $colorwidth Case 3, 4 $tDestBmp.color($t1 + 1) = $tMapColorTbl.bgr($t2 + 1) $tDestBmp.color($t1 + 2) = $tMapColorTbl.bgr($t2 + 2) $tDestBmp.color($t1 + 3) = $tMapColorTbl.bgr($t2 + 3) Case 2 ;convert from RGB555 to RGB $col = BitOR(BitShift($tMapColorTbl.bgr($t2 + 2), -8), $tMapColorTbl.bgr($t2 + 1)) ;RGB555 $tDestBmp.color($t1 + 1) = BitShift(BitAND($col, 0x001F), -3) ;B $tDestBmp.color($t1 + 2) = BitShift(BitShift(BitAND($col, 0x03E0), 5), -3) ;G $tDestBmp.color($t1 + 3) = BitShift(BitShift(BitAND($col, 0x7C00), 10), -3) ;R ;RGB565 ;~ $tDestBmp.color($t1 + 1) = BitShift(BitAND($col, 0x1F), -3) ;B ;~ $tDestBmp.color($t1 + 2) = BitShift(BitShift(BitAND($col, 0x07E0), 5), -2) ;G ;~ $tDestBmp.color($t1 + 3) = BitShift(BitShift(BitAND($col, 0xF800), 11), -3) ;R EndSwitch Next Next Else ;convert it to grayscale with luminosity calculation For $y = 0 To $iH - 1 $iOffset = $y * $iW $iOffset2 = $y * $stride For $x = 0 To $iW - 1 $t1 = $iOffset + $x + $pitch - 2 $t2 = $iOffset2 + $x * 3 $blue = $tSrcBmp.color($t1 + 1) $green = $tSrcBmp.color($t1 + 2) $red = $tSrcBmp.color($t1 + 3) ;~ $col = ($red + $green + $blue) / 3 $col = Int(($red * 0.30 + 0.59 * $green + 0.11 * $blue)) $col = $col < 0 ? 0 : $col > 255 ? 255 : $col $tDestBmp.color($t2 + 1) = $col $tDestBmp.color($t2 + 2) = $col $tDestBmp.color($t2 + 3) = $col Next Next EndIf Case 15, 16, 24, 32 ;15/16/24/32-bit, as the bitmap format is the same we can use memcpy to copy the pixel data directly to the memory. ;Exeptions are 15/16/24-bit images whose width is not a divider of 4! If BitOR($iPxDepth = 15, $iPxDepth = 16, $iPxDepth = 24) And Mod($iW, 4) Then Switch $iPxDepth Case 15, 16 $t4 = $iW * 2 For $y = 0 To ($iH - 1) $iOffset = $y * $t4 $iOffset2 = $y * $stride For $x = 0 To ($iW - 1) $t3 = $x * 2 $t1 = $iOffset + $t3 $t2 = $iOffset2 + $t3 ;RGB555 $tDestBmp.color($t2 + 1) = $tSrcBmp.color($t1 + $pitch + 1) $tDestBmp.color($t2 + 2) = $tSrcBmp.color($t1 + $pitch + 2) Next Next Case 24 $t4 = $iW * 3 For $y = 0 To $iH - 1 $iOffset = $y * $t4 $iOffset2 = $y * $stride For $x = 0 To ($iW - 1) $t1 = $iOffset + $x * 3 $blue = $tSrcBmp.color($t1 + 1) $green = $tSrcBmp.color($t1 + 2) $red = $tSrcBmp.color($t1 + 3) $t2 = $iOffset2 + $x * 3 $tDestBmp.color($t2 + 1) = $blue $tDestBmp.color($t2 + 2) = $green $tDestBmp.color($t2 + 3) = $red Next Next EndSwitch Else For $y = 0 To $iH - 1 $t1 = $y * $stride DllCall($hDLL, "ptr:cdecl", "memcpy", "ptr", DllStructGetPtr($tDestBmp) + $t1, "ptr", DllStructGetPtr($tSrcBmp) + $t1, "uint", $stride) Next EndIf EndSwitch DllClose($hDLL) ;TGA image is stored bottom up in file. Need to flip it. If BitAND($tTGAHeader.imageDescriptor, 0x30) <> 0x20 Then _GDIPlus_ImageRotateFlip($hBitmap, $GDIP_Rotate180FlipX) $tSrcBmp = 0 Return $hBitmap EndFunc ;==>_GDIPlus_TGAImageLoadFromFile ; #INTERNAL_USE_ONLY# =========================================================================================================== ; Name ..........: RemoveNullChars ; Description ...: Converts a null terminated binary string to a string ; Author ........: UEZ ; =============================================================================================================================== Func RemoveNullChars($bin) Local $a = StringRegExp($bin, "[[:xdigit:]+]{2}", 3), $s, $i If @error Then Return $s For $i = 0 To UBound($a) - 1 If $a[$i] = "00" Then ExitLoop $s &= Chr(Dec($a[$i])) Next Return $s EndFunc ;==>RemoveNullChars Global $sFile = FileOpenDialog("Select a TGA file", "", "TGA image(*.tga)") If @error Then Exit _GDIPlus_Startup() Global $timer = TimerInit() Global $hImage = _GDIPlus_TGAImageLoadFromFile($sFile, True) If @error Then ConsoleWrite(@error & " / " & @extended & @CRLF) _GDIPlus_Shutdown() Exit EndIf $endtime = TimerDiff($timer) ;~ _GDIPlus_ImageSaveToFile($hImage, @ScriptDir & "\Converted.png") ;~ ShellExecute(@ScriptDir & "\Converted.png") Global $iW = _GDIPlus_ImageGetWidth($hImage), $iH = _GDIPlus_ImageGetHeight($hImage) Global $hGui = GUICreate("TGA Image Loader by UEZ", $iW, $iH) GUISetState() Global $hGraphics = _GDIPlus_GraphicsCreateFromHWND($hGui) _GDIPlus_GraphicsDrawImageRect($hGraphics, $hImage, 0, 0, $iW, $iH) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE _GDIPlus_BitmapDispose($hImage) _GDIPlus_GraphicsDispose($hGraphics) _GDIPlus_Shutdown() Exit Case $GUI_EVENT_RESTORE _GDIPlus_GraphicsDrawImageRect($hGraphics, $hImage, 0, 0, $iW, $iH) EndSwitch WEnd  
      If you find a TGA image which is in scope of this script but doesn't convert it properly, please report it here.
       
      Thanks.
    • By UEZ
      AutoIt Windows Screenshooter
      Key Features:
      takes easily a screenshot from any visible window capture any region of the desktop incl. freehand capturing capture GUI controls and GUI menus separately capture a marked area every x seconds for a duration of y seconds create a GIF animation from saved frames (Vista or higher os required) capture to AVI file (without audio!) takes a screenshot from web sites (available only on Win7+ os and when Aero is enabled) put images to clipboard to paste to other applications easily color picker save image in different formats and also to PDF! add timestamp to saved images simple image editing options: greyscale, b&w, invert, rotate +-90° send image to printer and default email client preview of captured screens incl. zoom option multi monitor support display pixel color under mouse ruler basic image editor (paint, highlight, ellipse, rectangle, text and some graphic FX) watermark captured image no 3rd party tools or DLLs used - pure AutoIt! fully portable - no installation is needed multi language feature (Eng, Ger, Tur, Fra and Rus only) drag'n'drop an image to the app for editing To do:
      capture content of scrollable window/control capture cascaded menus Due to DllCall("User32.dll", "int", "PrintWindow", "hwnd", $hWnd, "handle", $hMemDC, "int", 0) limitation some windows cannot be captured properly (GDI+, ProgDVB, etc.) but can take screenshots of hidden windows. One workaround is to use full screen capturing (F11/F12) or "Grab Screen" function! Or try double click with rmb on listview items (beta).
      Download source code (9460 downloads previously): AutoIt Windows Screenshooter v1.84 Build 2019-08-18.7z (version 3.3.12.0+ needed!)
      You are not allowed to sell this code or just parts of it in a commercial project or modify it and distribute it with a different name!
      Download compiled Exe only: 4shared / Media Fire  / Softpedia (1.58mb)
      Distributing copies of the program in compiled format (exe) must be free of any fee!
      -----> click here to Donate!  
      (Current donators: 1. Cuong N.) 
       
       
      It is designed for Win7+ operating systems with AERO enabled! E.g. on WinXP machines some functions are not working properly and might crash the application!
      AV scanners may have a negative impact the execution of compiled exe and might report any malware. I guarantee that there is no malicious code in the source code / exe!!! 
      Main GUI:

       
       
      About Intro:

       
       
      Basic Image Editor:

       
       
      Watermark:

       
       
      Click link for an enhanced version of Watermark Image.
      Credits:
      main code by UEZ additional code (alphabetical order) by Authenticity, AutoItObject Team, Eemuli, Eukalyptus, funkey, _Kurt, martin, monoceres, ProgAndy, taietel, trancexx, Ward, wolf9228 and Yashied! mesale0077 for turkish translation wakillon for french translation AZJIO for russian translation Keys:
      Main GUI:
      User your mouse to scroll preview window or
      Numpad 8: Scroll preview window up
      Numpad 2: Scroll preview window down
      Numpad 4: Scroll preview window left
      Numpad 6: Scroll preview window right
      Numpad +: zoom in preview window or mouse wheel down
      Numpad -: zoom out preview window or mouse wheel up
      F1: capture again on last position
      F5: refresh Windows Name list
      PRINTSCREEN: take screenshot from whole screen
      ALT+PRINTSCR: take a screenshot from active window
      F10: Undo made changes with Image Editing function
      F11: take screenshot from whole screen incl mouse cursor
      F12: take screenshot from whole screen
      Ctrl+Alt+F9 start "Grab Screen" mode
      Ctrl+Alt+F12: take a screenshot from active window using alternative screenshot functionality (beta)!
      Ctrl+r: call ruler
      Ctrl+s: save current displayed image
      Ctrl+x: exit program
      ctrl+w: call web grab input field (available only when Aero is enabled)
      Ctrl+i: call image editor
      Ctrl+m: call watermark editor
      Ctrl+z: undo
      Only available on Vista+ os: double click with rmb on list items to use alternative screenshot functionality (beta)!
      When 'Grab Screen' is clicked you can hold down the ctrl key to switch to 'grab controls' mode. Control under mouse will be framed red.
      ctrl + shift will take the screenshot of appropriate control. To capture GUI menus you can press rmb which simulates the lmb. When a menu is opened press shift additionally to capture it.
      Press and hold only the shift key to capture any region on the desktop using freehand capturing - release it so capture marked regions!
      Or just mark resize able area which you want to grab. Press CTRL key to grab marked area or right mouse button to capture the marked area every x seconds for a duration of y seconds.
      When saving the image just enter the extension you wish to use (*.jpg;*.png;*.bmp;*.gif;*.tif;*.pdf). Big thanks to taietel for his PDF UDF!
      Image Editor:
      s: save
      c: copy
      n: send
      h: highlighter
      p: pen
      r: rectangle
      e: ellipse
      a: arrow
      o: color
      t: text
      g: text config
      Ctrl+z: undo
      Watermark editor:
      Ctrl+z: undo
       
      To start the app minimized just call it "Windows Screenshooter.exe /min"
      Maybe it is useful for someone...
      Any kind of comment is welcome.
      Br,
      UEZ
      Change log:
       


    • By UEZ
      Nothing special - just another analogue clock.  -> Read https://en.wikipedia.org/wiki/Swiss_railway_clock for more information.

       
      Requires Windows7+ OS!
       
       
      Widget style GUI:
      ;The Hilfiker / MobaTime Swiss Railway Clock ;Coded by UEZ build 2019-07-07 ;Thanks to Eukalyptus for the _CreateBrushedAluminum() function! #pragma Compile(Icon, "GDI+ Swiss Railway Clock.ico") #AutoIt3Wrapper_Run_Au3Stripper=y #Au3Stripper_Parameters=/so /pe /rm #AutoIt3Wrapper_Run_After=del /f /q "%scriptdir%\%scriptfile%_stripped.au3" #AutoIt3Wrapper_UseX64=n Break(0) #include <GDIPlus.au3> #include <GuiConstantsEx.au3> #include <WindowsConstants.au3> #include <WinAPISysWin.au3> ProcessSetPriority(@AutoItPID, $PROCESS_LOW) _GDIPlus_Startup() Global $hGUI, $iFPS = 0, $iShowFPS = 0, $bExit Global $iW, $iH, $iX, $iY, $sTitle = "GDI+ Swiss Railway Clock v1.16" $iW = IniRead(@ScriptDir & "\GDI+ Swiss Railway Clock.ini", "Settings", "GUI_Size", 200) $iW = $iW < 100 ? 100 : $iW > 800 ? 800 : $iW $iH = $iW $iX = IniRead(@ScriptDir & "\GDI+ Swiss Railway Clock.ini", "Settings", "GUI_PosX", -1) $iY = IniRead(@ScriptDir & "\GDI+ Swiss Railway Clock.ini", "Settings", "GUI_PosY", -1) Global Const $fRad = ACos(-1) / 180, $fDeg = 180 / ACos(-1), $iTimer = 30, $ULW_ALPHA = 2, $SC_DRAGMOVE = 0xF012, $fDeltaShadow = 20 Global $hBitmap, $hHBitmap, $hCanvas, $hBitmap_Clock, $hBrush_Shadow, $hBrush_Update, $hPen_Update, $fDiameter = $iW, $fShadowAngle, $fMin_next, _ $fRadius = $fDiameter / 2, $fSec, $fMin, $fHr, $fAmplitude = 3, $fSize, $hOld Global $tSize = DllStructCreate($tagSIZE), $tSource = DllStructCreate($tagPOINT), $tBlend = DllStructCreate($tagBLENDFUNCTION) $tSize.X = $iW $tSize.Y = $iH $tBlend.Alpha = 255 $tBlend.Format = 1 Global Const $hScrDC = _WinAPI_GetDC($hGUI), $hMemDC = _WinAPI_CreateCompatibleDC($hScrDC) AutoItSetOption("GUIOnEventMode", 1) GDIPlus_SwissRailwayClockWidget() AutoItSetOption("GUIOnEventMode", 0) _GDIPlus_Shutdown() Func GDIPlus_SwissRailwayClockWidget() $bExit = False $hGUI = GUICreate($sTitle, $iW, $iH, $iX, $iY, $WS_POPUP, BitOR($WS_EX_TOPMOST, $WS_EX_LAYERED)) GUISetState(@SW_SHOW, $hGUI) ;create canvas elements $hBitmap = _GDIPlus_BitmapCreateFromScan0($iW + $fDeltaShadow, $iH + $fDeltaShadow) $hCanvas = _GDIPlus_ImageGetGraphicsContext($hBitmap) Local Const $iAlpha = 0x0D / $iW * 200 $hBrush_Shadow = _GDIPlus_BrushCreateSolid(BitShift(0x0D + $iAlpha, -24) + 0x202020) $hPen_Update = _GDIPlus_PenCreate(0xFFA02020) $hBrush_Update = _GDIPlus_BrushCreateSolid(0) _GDIPlus_GraphicsSetSmoothingMode($hCanvas, $GDIP_SMOOTHINGMODE_HIGHQUALITY) _GDIPlus_GraphicsSetPixelOffsetMode($hCanvas, $GDIP_PIXELOFFSETMODE_HIGHQUALITY) $hBitmap_Clock = GenerateClockBg($fDiameter) GUISetOnEvent($GUI_EVENT_CLOSE, "_Exit_About") $fMin_next = @MIN GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN") GUIRegisterMsg($WM_TIMER, "Draw") ;$WM_TIMER = 0x0113 Local $iID = DllCall("User32.dll", "uint_ptr", "SetTimer", "hwnd", $hGUI, "uint_ptr", 1, "uint", $iTimer, "ptr", 0)[0] Do If $bExit Then ExitLoop Until Not Sleep(100) ;release resources GUIRegisterMsg($WM_TIMER, "") DllCall("user32.dll", "bool", "KillTimer", "hwnd", $hGUI, "uint_ptr", $iID) GUIRegisterMsg($WM_LBUTTONDOWN, "") _GDIPlus_PenDispose($hPen_Update) _GDIPlus_BrushDispose($hBrush_Shadow) _GDIPlus_BrushDispose($hBrush_Update) _GDIPlus_GraphicsDispose($hCanvas) _GDIPlus_ImageDispose($hCanvas) _WinAPI_ReleaseDC(0, $hScrDC) _WinAPI_DeleteDC($hMemDC) IniWrite(@ScriptDir & "\GDI+ Swiss Railway Clock.ini", "Settings", "GUI_Size", WinGetPos($hGUI)[2]) IniWrite(@ScriptDir & "\GDI+ Swiss Railway Clock.ini", "Settings", "GUI_PosX", WinGetPos($hGUI)[0]) IniWrite(@ScriptDir & "\GDI+ Swiss Railway Clock.ini", "Settings", "GUI_PosY", WinGetPos($hGUI)[1]) GUIDelete($hGUI) EndFunc ;==>GDIPlus_SwissRailwayClockWidget Func Draw($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam, $lParam _GDIPlus_GraphicsClear($hCanvas, 0x00000000) _GDIPlus_GraphicsDrawImageRect($hCanvas, $hBitmap_Clock, 0, 0, $fDiameter + $fDeltaShadow, $fDiameter + $fDeltaShadow) UpdateClock($hCanvas, $fDiameter) $hHBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap) $hOld = _WinAPI_SelectObject($hMemDC, $hHBitmap) _WinAPI_UpdateLayeredWindow($hGUI, $hScrDC, 0, DllStructGetPtr($tSize), $hMemDC, DllStructGetPtr($tSource), 0, DllStructGetPtr($tBlend), $ULW_ALPHA) _WinAPI_SelectObject($hMemDC, $hOld) _WinAPI_DeleteObject($hHBitmap) EndFunc ;==>Draw Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam) Switch $hWnd Case $hGUI _SendMessage($hWnd, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndSwitch EndFunc ;==>_WM_LBUTTONDOWN Func _Exit_About() $bExit = True EndFunc ;==>_Exit_About Func UpdateClock($hGfx, $fDiameter) Static $bBounce = 0, $f = 0 Local $m1 = $fDiameter * 0.015 ;hour $fHr = 30 * (@HOUR + @MIN / 60) _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, $fHr) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) Local $iWidth1 = $fDiameter * 0.0375, _ $iHeight1 = $fDiameter / 2.5, _ $iWidth12 = $iWidth1 / 2, _ $fPosY = $fDiameter * 0.2, $iWidth2, $iWidth22, $fPosY2 _GDIPlus_BrushSetSolidColor($hBrush_Update, 0xFF101010) DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Shadow, _ "float", $fRadius - $iWidth12 + Cos(($fShadowAngle - $fHr) * $fRad) * $m1, _ "float", $fPosY + Sin(($fShadowAngle - $fHr) * $fRad) * $m1, _ "float", $iWidth1, "float", $iHeight1) ;~ DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Update, _ ;~ "float", $fRadius - $iWidth12, _ ;~ "float", $fPosY, _ ;~ "float", $iWidth1, "float", $iHeight1) Local $tPoints = DllStructCreate("float p[8]"), $factor = $iW / 160 ; 1----2 ; | | ; 4----3 ;1 $tPoints.p(1) = $fRadius - $iWidth12 $tPoints.p(2) = $fPosY ;2 $tPoints.p(3) = $tPoints.p(1) + $iWidth1 $tPoints.p(4) = $fPosY ;3 $tPoints.p(5) = $tPoints.p(3) + $factor $tPoints.p(6) = $fPosY + $iHeight1 ;4 $tPoints.p(7) = $tPoints.p(1) - $factor $tPoints.p(8) = $tPoints.p(6) DllCall($__g_hGDIPDll, "int", "GdipFillPolygon", "handle", $hGfx, "handle", $hBrush_Update, _ "struct*", $tPoints, "int", 4, "int", "FillModeAlternate") _GDIPlus_GraphicsResetTransform($hGfx) ;min If $fMin_next <> @MIN Then $bBounce = 1 Switch $bBounce Case 1 $fMin = (6 * Mod(($fMin_next + 1), 60)) + Sin($f * 1.9) * $fAmplitude If $fAmplitude = 0 Then $fMin_next = @MIN $f = 0 $fAmplitude = 3 $bBounce = 0 Else $fAmplitude -= 0.5 $fAmplitude = $fAmplitude <= 0 ? 0 : $fAmplitude $f += 1 EndIf Case Else $fMin = (6 * @MIN) EndSwitch _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, $fMin) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) $iWidth1 = $fDiameter * 0.03 $iHeight1 = $fRadius $iWidth12 = $iWidth1 / 2 $fPosY = $fDiameter * 0.1 DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Shadow, _ "float", $fRadius - $iWidth12 + Cos(($fShadowAngle - $fMin) * $fRad) * $m1, _ "float", $fPosY + Sin(($fShadowAngle - $fMin) * $fRad) * $m1, _ "float", $iWidth1, "float", $iHeight1) ;~ DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Update, _ ;~ "float", $fRadius - $iWidth12, _ ;~ "float", $fPosY, _ ;~ "float", $iWidth1, "float", $iHeight1) ;1 $tPoints.p(1) = $fRadius - $iWidth12 $tPoints.p(2) = $fPosY ;2 $tPoints.p(3) = $tPoints.p(1) + $iWidth1 $tPoints.p(4) = $fPosY ;3 $tPoints.p(5) = $tPoints.p(3) + $factor $tPoints.p(6) = $fPosY + $iHeight1 ;4 $tPoints.p(7) = $tPoints.p(1) - $factor $tPoints.p(8) = $tPoints.p(6) DllCall($__g_hGDIPDll, "int", "GdipFillPolygon", "handle", $hGfx, "handle", $hBrush_Update, _ "struct*", $tPoints, "int", 4, "int", "FillModeAlternate") _GDIPlus_GraphicsResetTransform($hGfx) ;sec $fSec = 6 * (@SEC * 1.02564 + @MSEC / 1000) If $fSec >= 360 Then $fSec = 0 _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, $fSec) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) $fPosY = $fDiameter * 0.27 $fPosY2 = $fDiameter * 0.19 $iWidth1 = $fDiameter * 0.0095 $iHeight1 = $fRadius * 1.3 - $fPosY $iWidth12 = $iWidth1 / 2 $iWidth2 = $fDiameter * 0.083333 $iWidth22 = $iWidth2 / 2 ;shadow seconds DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Shadow, _ "float", $fRadius + Cos(($fShadowAngle - $fSec) * $fRad) * $m1, _ "float", $fPosY + Sin(($fShadowAngle - $fSec) * $fRad) * $m1, _ "float", $iWidth1 + $fDiameter * 0.006667, "float", $iHeight1 + $fDiameter * 0.006667) DllCall($__g_hGDIPDll, "int", "GdipFillEllipse", "handle", $hGfx, "handle", $hBrush_Shadow, _ "float", $fRadius - $iWidth22 + Cos(($fShadowAngle - $fSec) * $fRad) * $m1, _ "float", $fPosY2 + Sin(($fShadowAngle - $fSec) * $fRad) * $m1, _ "float", $iWidth2, "float", $iWidth2) ;seconds _GDIPlus_BrushSetSolidColor($hBrush_Update, 0xFFC01010) DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Update, _ "float", $fRadius - $iWidth12, _ "float", $fPosY, _ "float", $iWidth1, "float", $iHeight1) DllCall($__g_hGDIPDll, "int", "GdipFillEllipse", "handle", $hGfx, "handle", $hBrush_Update, _ "float", $fRadius - $iWidth22, _ "float", $fPosY2, _ "float", $iWidth2, "float", $iWidth2) _GDIPlus_GraphicsResetTransform($hGfx) ;button in the center DllCall($__g_hGDIPDll, "int", "GdipFillEllipse", "handle", $hGfx, "handle", $hBrush_Update, _ "float", $fRadius - $iWidth1, _ "float", $fRadius - $iWidth1, _ "float", 2 * $iWidth1, "float", 2 * $iWidth1) DllCall($__g_hGDIPDll, "int", "GdipDrawEllipse", "handle", $hGfx, "handle", $hPen_Update, _ "float", $fRadius - $iWidth1, _ "float", $fRadius - $iWidth1, _ "float", 2 * $iWidth1, "float", 2 * $iWidth1) EndFunc ;==>UpdateClock Func GenerateClockBg($fDiameter, $iBGColor = 0xF8FFFFFF) Local Const $hBitmap = _GDIPlus_BitmapCreateFromScan0($fDiameter + $fDeltaShadow, $fDiameter + $fDeltaShadow), $hGfx = _GDIPlus_ImageGetGraphicsContext($hBitmap), _ $hBrush = _GDIPlus_BrushCreateSolid($iBGColor), $fBorderSize = $fDiameter * 0.03333, _ $hEffect = _GDIPlus_EffectCreateBlur($fDiameter / 50, 1), $hPen = _GDIPlus_PenCreate(0xA0000000, $fBorderSize) _GDIPlus_GraphicsSetSmoothingMode($hGfx, 4) _GDIPlus_GraphicsSetPixelOffsetMode($hGfx, 4) _GDIPlus_GraphicsSetTextRenderingHint($hGfx, 4) Local Const $fSize = $fDiameter * 0.942 - $fBorderSize / 2 Local Const $hLBrush = _GDIPlus_LineBrushCreate($fBorderSize, $fBorderSize, $fSize, $fSize, 0xFCFFFFFF, 0xF8F0F0F0, 3) _GDIPlus_LineBrushSetSigmaBlend($hLBrush, 0.33333) _GDIPlus_LineBrushSetGammaCorrection($hLBrush) Local Const $hMatrix = _GDIPlus_MatrixCreate() _GDIPlus_MatrixTranslate($hMatrix, -$fSize, -$fSize, True) _GDIPlus_MatrixRotate($hMatrix, 90, True) _GDIPlus_MatrixTranslate($hMatrix, $fSize, $fSize, True) _GDIPlus_LineBrushMultiplyTransform($hLBrush, $hMatrix, True) _GDIPlus_MatrixDispose($hMatrix) _GDIPlus_GraphicsFillEllipse($hGfx, $fBorderSize, $fBorderSize, $fSize, $fSize, $hLBrush) ;~ Local Const $hPath = _GDIPlus_PathCreate() ;~ _GDIPlus_PathAddEllipse($hPath, $fBorderSize, $fBorderSize, $fSize, $fSize) ;~ Local $hLBrush = _GDIPlus_PathBrushCreateFromPath($hPath) ;~ _GDIPlus_PathBrushSetCenterColor($hLBrush, 0xF8F0F0FF) ;~ _GDIPlus_PathBrushSetCenterPoint($hLBrush, $fSize * 0.70, $fSize * 0.70) ;~ _GDIPlus_PathBrushSetSurroundColor($hLBrush, 0xFBFFFFFF) ;~ _GDIPlus_PathBrushSetGammaCorrection($hLBrush, True) ;~ _GDIPlus_GraphicsFillPath($hGfx, $hPath, $hLBrush) ;~ _GDIPlus_PathDispose($hPath) Local $fShadow_vx = $fDiameter * 0.0095, $fShadow_vy = $fDiameter * 0.01 $fShadowAngle = ATan($fShadow_vy / $fShadow_vx) * $fDeg If $fShadow_vx < 0 And $fShadow_vy >= 0 Then $fShadowAngle += 180 If $fShadow_vx < 0 And $fShadow_vy < 0 Then $fShadowAngle -= 180 _GDIPlus_GraphicsDrawEllipse($hGfx, $fBorderSize + $fShadow_vx, $fBorderSize + $fShadow_vy, $fSize, $fSize, $hPen) _GDIPlus_BitmapApplyEffect($hBitmap, $hEffect) _GDIPlus_BrushSetSolidColor($hBrush) _GDIPlus_PenSetColor($hPen, 0xF0000000) Local Const $hBitmap_Texture = _CreateBrushedAluminum($fDiameter, $fDiameter, $fShadowAngle) Local Const $hTexture = _GDIPlus_TextureCreate($hBitmap_Texture) DllCall($__g_hGDIPDll, "int", "GdipSetPenBrushFill", "ptr", $hPen, "ptr", $hTexture) _GDIPlus_GraphicsDrawEllipse($hGfx, $fBorderSize, $fBorderSize, $fSize, $fSize, $hPen) _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, -6) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) Local $iWidth1 = $fDiameter * 0.026667, $iHeight1 = $fDiameter / 10, $iWidth12 = $iWidth1 / 2, $fPosY = $fDiameter * 0.083333, _ $iWidth2 = $fDiameter * 0.013333, $iHeight2 = $fDiameter * 0.0416667, $iWidth22 = $iWidth2 / 2 For $i = 0 To 59 _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, 6) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) Switch Mod($i, 5) Case 0 _GDIPlus_GraphicsFillRect($hGfx, $fRadius - $iWidth12, $fPosY, $iWidth1, $iHeight1, $hBrush) Case Else _GDIPlus_GraphicsFillRect($hGfx, $fRadius - $iWidth22, $fPosY, $iWidth2, $iHeight2, $hBrush) EndSwitch Next _GDIPlus_GraphicsResetTransform($hGfx) Local Const $hBitmap_Logo = _GDIPlus_BitmapCreateFromMemory(_Au3_Icon()) Local Const $hBitmap_Logo_Scaled = _GDIPlus_ImageResize($hBitmap_Logo, $fDiameter * 0.125, $fDiameter * 0.125) Local $aDim = _GDIPlus_ImageGetDimension($hBitmap_Logo_Scaled) _GDIPlus_GraphicsDrawImageRect($hGfx, $hBitmap_Logo_Scaled, $fRadius - $aDim[0] / 2, $fRadius / 2, $aDim[0], $aDim[1]) _GDIPlus_ImageDispose($hBitmap_Logo) _GDIPlus_ImageDispose($hBitmap_Logo_Scaled) Local Const $hFamily = _GDIPlus_FontFamilyCreate("Segoe Script"), $hFont = _GDIPlus_FontCreate($hFamily, $fDiameter * 0.025), $hFormat = _GDIPlus_StringFormatCreate() _GDIPlus_StringFormatSetAlign($hFormat, 1) _GDIPlus_StringFormatSetLineAlign($hFormat, 1) _GDIPlus_BrushSetSolidColor($hBrush, 0xE0000000) _GDIPlus_GraphicsDrawStringEx($hGfx, "Clock coded by" & @CRLF & "UEZ", $hFont, _GDIPlus_RectFCreate($fRadius - $fRadius * 0.2, $fRadius + $fRadius * 0.2, $fRadius * 0.4, $fRadius * 0.4), $hFormat, $hBrush) _GDIPlus_ImageDispose($hBitmap_Texture) _GDIPlus_BrushDispose($hTexture) _GDIPlus_FontDispose($hFont) _GDIPlus_FontFamilyDispose($hFamily) _GDIPlus_StringFormatDispose($hFormat) _GDIPlus_EffectDispose($hEffect) _GDIPlus_PenDispose($hPen) _GDIPlus_BrushDispose($hBrush) _GDIPlus_BrushDispose($hLBrush) _GDIPlus_GraphicsDispose($hGfx) Return $hBitmap EndFunc ;==>GenerateClockBg Func _CreateBrushedAluminum($iW, $iH, $fLightAngle = 40, $iBlurDist = 12, $fBlurTrans = 0.6666, $fRed = 0.8, $fGreen = 0.9, $fBlue = 1, $iLightColor = 0xF0FFFFFF, $fLightSigma = 0.5, $fLightScale = 0.83) ;coded by Eukalyptus! $iBlurDist = Ceiling($iBlurDist) $iBlurDist += 1 - Mod($iBlurDist, 2) Local $iOverSize = 0 For $i = 1 To $iBlurDist Step 2 $iOverSize += $i + $i + 1 Next Local $iWO = $iW + $iOverSize ;========================================= ; Add Noise ;========================================= Local $iNoiseSize = 40 Local $hBmp_Noise = _GDIPlus_BitmapCreateFromScan0($iNoiseSize, $iNoiseSize) Local $hGfx_Noise = _GDIPlus_ImageGetGraphicsContext($hBmp_Noise) Local $tData = _GDIPlus_BitmapLockBits($hBmp_Noise, 0, 0, $iNoiseSize, $iNoiseSize, BitOR($GDIP_ILMREAD, $GDIP_ILMWRITE), $GDIP_PXF32ARGB) Local $iStride = DllStructGetData($tData, "Stride") Local $iWidth = DllStructGetData($tData, "Width") Local $iHeight = DllStructGetData($tData, "Height") Local $pScan0 = DllStructGetData($tData, "Scan0") Local $tPixel = DllStructCreate("dword[" & $iWidth * $iHeight & "];", $pScan0) Local $iAmp For $row = 0 To $iHeight - 1 For $col = 0 To $iWidth - 1 $iAmp = Random(0, 0xFF, 1) DllStructSetData($tPixel, 1, BitOR(0xFF000000, BitShift($iAmp, -16), BitShift($iAmp, -8), $iAmp), $row * $iWidth + $col + 1) Next Next _GDIPlus_BitmapUnlockBits($hBmp_Noise, $tData) ;========================================= ; Create Full NoiseBitmap ;========================================= Local $hBmp_Full = _GDIPlus_BitmapCreateFromScan0($iWO, $iH) Local $hGfx_Full = _GDIPlus_ImageGetGraphicsContext($hBmp_Full) _GDIPlus_GraphicsSetSmoothingMode($hGfx_Full, 4) _GDIPlus_GraphicsSetInterpolationMode($hGfx_Full, 3) Local $iXOff, $iYOff, $iSizeX, $iSizeY For $y = 0 To $iH Step $iNoiseSize / 2 For $x = 0 To $iWO Step $iNoiseSize / 2 $iXOff = Random(0, $iNoiseSize / 2, 1) $iYOff = Random(0, $iNoiseSize / 2, 1) $iSizeX = $iNoiseSize - $iXOff $iSizeY = $iNoiseSize - $iYOff _GDIPlus_GraphicsDrawImageRectRect($hGfx_Full, $hBmp_Noise, $iXOff, $iYOff, $iSizeX, $iSizeY, $x, $y, $iSizeX, $iSizeY) Next Next _GDIPlus_GraphicsDispose($hGfx_Noise) _GDIPlus_BitmapDispose($hBmp_Noise) ;========================================= ; MotionBlur ;========================================= Local $hBmp_Full2 = _GDIPlus_BitmapCreateFromScan0($iWO, $iH) Local $hGfx_Full2 = _GDIPlus_ImageGetGraphicsContext($hBmp_Full2) _GDIPlus_GraphicsSetSmoothingMode($hGfx_Full2, 4) _GDIPlus_GraphicsSetInterpolationMode($hGfx_Full, 3) Local $tColorMatrix = DllStructCreate("float[5]; float[5]; float[5]; float[5]; float[5];") DllStructSetData($tColorMatrix, 1, 1, 1) DllStructSetData($tColorMatrix, 2, 1, 2) DllStructSetData($tColorMatrix, 3, 1, 3) DllStructSetData($tColorMatrix, 4, $fBlurTrans, 4) DllStructSetData($tColorMatrix, 5, 1, 5) Local $hImgAttrib = _GDIPlus_ImageAttributesCreate() DllCall($__g_hGDIPDll, "int", "GdipSetImageAttributesColorMatrix", "ptr", $hImgAttrib, "int", 1, "int", 1, "struct*", $tColorMatrix, "struct*", 0, "int", 0) For $i = 1 To $iBlurDist Step 2 DllCall($__g_hGDIPDll, "int", "GdipDrawImageRectRect", "ptr", $hGfx_Full2, "ptr", $hBmp_Full, _ "float", $i, "float", 0, "float", $iWO, "float", $iH, _ "float", 0, "float", 0, "float", $iWO, "float", $iH, _ "int", 2, "ptr", $hImgAttrib, "ptr", 0, "ptr", 0) If $i >= $iBlurDist Then DllStructSetData($tColorMatrix, 1, $fRed, 1) DllStructSetData($tColorMatrix, 2, $fGreen, 2) DllStructSetData($tColorMatrix, 3, $fBlue, 3) DllStructSetData($tColorMatrix, 4, 1, 4) DllCall($__g_hGDIPDll, "int", "GdipSetImageAttributesColorMatrix", "ptr", $hImgAttrib, "int", 1, "int", 1, "struct*", $tColorMatrix, "struct*", 0, "int", 0) EndIf DllCall($__g_hGDIPDll, "int", "GdipDrawImageRectRect", "ptr", $hGfx_Full, "ptr", $hBmp_Full2, _ "float", $i + 1, "float", 0, "float", $iWO, "float", $iH, _ "float", 0, "float", 0, "float", $iWO, "float", $iH, _ "int", 2, "ptr", $hImgAttrib, "ptr", 0, "ptr", 0) Next _GDIPlus_ImageAttributesDispose($hImgAttrib) _GDIPlus_GraphicsDispose($hGfx_Full2) _GDIPlus_BitmapDispose($hBmp_Full2) _GDIPlus_GraphicsDispose($hGfx_Full) ;========================================= ; Add Light ;========================================= Local $hBmp_Alu = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Local $hGfx_Alu = _GDIPlus_ImageGetGraphicsContext($hBmp_Alu) _GDIPlus_GraphicsSetSmoothingMode($hGfx_Alu, 4) _GDIPlus_GraphicsSetInterpolationMode($hGfx_Alu, 3) _GDIPlus_GraphicsDrawImage($hGfx_Alu, $hBmp_Full, -$iOverSize, 0) _GDIPlus_BitmapDispose($hBmp_Full) Local $tPointF1 = DllStructCreate("float; float;") Local $tPointF2 = DllStructCreate("float; float;") DllStructSetData($tPointF2, 2, $iH * $fLightScale) $aResult = DllCall($__g_hGDIPDll, "int", "GdipCreateLineBrush", "struct*", $tPointF1, "struct*", $tPointF2, "uint", 0, "uint", $iLightColor, "int", 0, "handle*", 0) If @error Or Not IsArray($aResult) Then Return SetError(1, 4, False) Local $hBrush = $aResult[6] _GDIPlus_LineBrushSetSigmaBlend($hBrush, $fLightSigma) _GDIPlus_LineBrushSetGammaCorrection($hBrush) DllCall($__g_hGDIPDll, "int", "GdipRotateLineTransform", "ptr", $hBrush, "float", $fLightAngle, "int", 0) _GDIPlus_GraphicsFillRect($hGfx_Alu, 0, 0, $iW, $iH, $hBrush) _GDIPlus_BrushDispose($hBrush) _GDIPlus_GraphicsDispose($hGfx_Alu) Return $hBmp_Alu EndFunc ;==>_CreateBrushedAluminum ;Code below was generated by: 'File to Base64 String' Code Generator v1.20 Build 2018-02-02 Func _Au3_Icon($bSaveBinary = False, $sSavePath = @ScriptDir) Local $Au3_Icon $Au3_Icon &= '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' $Au3_Icon &= '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' $Au3_Icon &= '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' $Au3_Icon &= 'pX1ld+/Ah6zonxYhFCsXGumqqk2fDDspCkanIVxbKRkHh6l+X09XNcoQKEolmKAnwgUDzO7fyKZKVgTwMYh7gEFsQtNw697BC6HIR4ic0oUEESQKqkFEHCYmjpMe5zAudCLGFoHp97dDQEQwZmbKchqPYZ9B/4DxoIdqeSJezQhlwTAvwaecQDiBiMwe8cvtxS0fpxfAWoB7QIQoQlm8/NIrNz9z7fLZ94vzSeycZaWJYDzxSB1MmW2q+0TrieAReZ6RF4FRHhgXSqEQJkl0PLadkiR+ZkIIoWCUGdRjmB/rJxQRvBfMQIwESEGSmQG930AY7+HS5/N8fCXPy6KeuiSNnR2Pc1mqJ5ONOywU78BsLjwfjRj0e5NO0s+UIH5aUV+HKJlm21fUkkwhwVAzBCiLgmCAiwG7n6b4yIub6VcsA7uO6Q4QHjRKFGg5rObzs/VasmiqZZr4qJrd7bGtBcnyAifzHIeg9LoH7B70GWoEyRIsLEzFu1nnMuaVRRjmBUupYgrihLIsURyIZ155nVIDjSRR50Sq9tx7+ZXrf46Gf8TKm4CdMguJz4uil+fFKIp80lxo2NZ6g+oZVQXmq9w9OuDmzhFaW4HFzrTSGNicU9hJsPMAmAIOwyjLAM7PzOr9xGgvpZhBvz/aE/HerMiA0WldSIGeqXZFJC6Dulq9ThmChBAwM0wVMxgOj7m730NrHVhYB+fAwikjtIAACGqAKjp7V1AD8QD3VZ5Q4H1kywux5EXQ732Ra7eab0I1AO40AyCupxpe2T/qf9P7yMTUiqKwk9YnMhnWDg+PyKUOjc682gg/EMJ8jzKFqoG4k8xjYUot6LQagikGriyDdnv9zyNyBJSnG9C8b0X2D3mpN9MkcveJB1SV7tE+B4MwFY8ADxEv833pBEwAM8bjMaNxBshcvJYQcpyPbKtTpyjNIufk7l73q1qMvoiVuwCnGRAgixvNKxe21t+VZVlpZq6izA4pBsd9dg5HkDZn' $Au3_Icon &= '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' $Au3_Icon &= 'gMTEOQcCqIo4RlkpVRu2Uk129w8DneWxeO9v3N79l+pCnuVfxvRfCdkLwIDXAPnSf33tU+fOnvktEXNFUUi1af3e3sHXNRQfA746P0+p4eJlxJ9D5I3OR09fPnfml6vD5m6rubCdRC4FAUDNdDTOe977ej2NUjOjdzxgNBwVh73h3/ooGXrvk2w8esE0PI9Nus11oM9rhHzhi//xtpXV1c+msW92uz0ODw6fA/1t4Es8GDEu3kDcFRclP6Ua2nGcbMdxvI4hzossLdQvAeRFeS/Liv00jddUtej2Bs9pKP4TDYdgOdBD3C4h2wcCrx1M/8kn7j2Y/gxwM03Tz2RZdouHo4GLOuA2EGliNBGpY3qM8+uAoeV3MBvjXBucTJ5dfIcwGgIGlIDxOjAx8DrhgQioEdUjxCmmEQDlaDATGTPF+JRKv24Dbp71GX9M8L84Jo46QVTs6gAAAABJRU5ErkJggg==' Local $bString = _WinAPI_Base64Decode($Au3_Icon) If @error Then Return SetError(1, 0, 0) $bString = Binary($bString) If $bSaveBinary Then Local Const $hFile = FileOpen($sSavePath & "\au3-icon2.png", 18) If @error Then Return SetError(2, 0, $bString) FileWrite($hFile, $bString) FileClose($hFile) EndIf Return $bString EndFunc ;==>_Au3_Icon Func _WinAPI_Base64Decode($sB64String) Local $aCrypt = DllCall("Crypt32.dll", "bool", "CryptStringToBinaryA", "str", $sB64String, "dword", 0, "dword", 1, "ptr", 0, "dword*", 0, "ptr", 0, "ptr", 0) If @error Or Not $aCrypt[0] Then Return SetError(1, 0, "") Local $bBuffer = DllStructCreate("byte[" & $aCrypt[5] & "]") $aCrypt = DllCall("Crypt32.dll", "bool", "CryptStringToBinaryA", "str", $sB64String, "dword", 0, "dword", 1, "struct*", $bBuffer, "dword*", $aCrypt[5], "ptr", 0, "ptr", 0) If @error Or Not $aCrypt[0] Then Return SetError(2, 0, "") Return DllStructGetData($bBuffer, 1) EndFunc ;==>_WinAPI_Base64Decode  
      Download: GDI+ Swiss Railway Clock v1.16 (Widget).au3
       
       
      GUI version (discontinued):
      ;the Hilfiker / MobaTime Swiss Railway Clock ;coded by UEZ build 2018-03-01 ;thanks to Eukalyptus for the _CreateBrushedAluminum() function! #Pragma Compile(Icon, "GDI+ Swiss Railway Clock.ico") #AutoIt3Wrapper_Run_Au3Stripper=y #Au3Stripper_Parameters=/so /pe /rm #AutoIt3Wrapper_Run_After=del /f /q "%scriptdir%\%scriptfile%_stripped.au3" #AutoIt3Wrapper_UseX64=n Break(0) #include <GDIPlus.au3> #include <GuiConstantsEx.au3> #include <WindowsConstants.au3> ProcessSetPriority(@AutoItPID, $PROCESS_LOW) _GDIPlus_Startup() Global $hGUI, $iFPS = 0, $iShowFPS = 0, $bExit Global Const $iW = 512, $iH = $iW, $iWh = $iW / 2, $iHh = $iH / 2, $sTitle = "GDI+ Swiss Railway Clock v1.1" Global Const $fRad = ACos(-1) / 180, $fDeg = 180 / ACos(-1), $iTimer = 30, $fDeltaShadow = $iW * 0.020 Global $hDC, $hCanvas, $hBitmap_Clock, $hBrush_Shadow, $hBrush_Update, $hPen_Update, $fDiameter = $iW, $hDC_backbuffer, $fShadowAngle, $fMin_next, _ $fRadius = $fDiameter / 2, $fSec, $fMin, $fHr, $fAmplitude = 3 AutoItSetOption("GUIOnEventMode", 1) GDIPlus_SwissRailwayClock() AutoItSetOption("GUIOnEventMode", 0) _GDIPlus_Shutdown() Func GDIPlus_SwissRailwayClock() $bExit = False $hGUI = GUICreate($sTitle, $iW + $fDeltaShadow, $iH + $fDeltaShadow, -1, -1, -1, $WS_EX_TOPMOST) GUISetBkColor(0xFFFFFF, $hGUI) GUISetState(@SW_SHOW, $hGUI) ;~ GUISetCursor(16, 1) ;create canvas elements $hDC = _WinAPI_GetDC($hGUI) Local Const $hHBitmap = _WinAPI_CreateCompatibleBitmap($hDC, $iW + $fDeltaShadow, $iH + $fDeltaShadow) $hDC_backbuffer = _WinAPI_CreateCompatibleDC($hDC) Local Const $DC_obj = _WinAPI_SelectObject($hDC_backbuffer, $hHBitmap) $hCanvas = _GDIPlus_GraphicsCreateFromHDC($hDC_backbuffer) $hBrush_Shadow = _GDIPlus_BrushCreateSolid(0x14A0A0A0) $hPen_Update = _GDIPlus_PenCreate(0xFFA02020) $hBrush_Update = _GDIPlus_BrushCreateSolid(0) _GDIPlus_GraphicsSetSmoothingMode($hCanvas, $GDIP_SMOOTHINGMODE_HIGHQUALITY) _GDIPlus_GraphicsSetPixelOffsetMode($hCanvas, $GDIP_PIXELOFFSETMODE_HIGHQUALITY) $fDiameter = $fDiameter < 128 ? 128 : $fDiameter > 1024 ? 1024 : $fDiameter $hBitmap_Clock = GenerateClockBg($fDiameter) GUISetOnEvent($GUI_EVENT_CLOSE, "_Exit_About") $fMin_next = @MIN GUIRegisterMsg($WM_TIMER, "Draw") ;$WM_TIMER = 0x0113 Local $iID = DllCall("User32.dll", "uint_ptr", "SetTimer", "hwnd", $hGUI, "uint_ptr", 1, "uint", $iTimer, "ptr", 0)[0] Do If $bExit Then ExitLoop Until Not Sleep(100) ;release resources GUIRegisterMsg($WM_TIMER, "") DllCall("user32.dll", "bool", "KillTimer", "hwnd", $hGUI, "uint_ptr", $iID) _GDIPlus_PenDispose($hPen_Update) _GDIPlus_BrushDispose($hBrush_Shadow) _GDIPlus_BrushDispose($hBrush_Update) _GDIPlus_GraphicsDispose($hCanvas) _WinAPI_SelectObject($hDC_backbuffer, $DC_obj) _WinAPI_DeleteDC($hDC_backbuffer) _WinAPI_DeleteObject($hHBitmap) _WinAPI_ReleaseDC($hGUI, $hDC) GUIDelete($hGUI) EndFunc ;==>GDIPlus_SwissRailwayClock Func Draw($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam, $lParam _GDIPlus_GraphicsDrawImageRect($hCanvas, $hBitmap_Clock, 0, 0, $fDiameter + $fDeltaShadow, $fDiameter + $fDeltaShadow) UpdateClock($hCanvas, $fDiameter) _WinAPI_BitBlt($hDC, 0, 0, $iW + $fDeltaShadow, $iH + $fDeltaShadow, $hDC_backbuffer, 0, 0, $SRCCOPY) EndFunc Func _Exit_About() $bExit = True EndFunc ;==>_Exit_About Func UpdateClock($hGfx, $fDiameter) Static $bBounce = 0, $f = 0 Local $m1 = $fDiameter * 0.015 ;hour $fHr = 30 * (@HOUR + @MIN / 60) _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, $fHr) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) Local $iWidth1 = $fDiameter * 0.0375, _ $iHeight1 = $fDiameter / 2.5, _ $iWidth12 = $iWidth1 / 2, _ $fPosY = $fDiameter * 0.2, $iWidth2, $iWidth22, $fPosY2 _GDIPlus_BrushSetSolidColor($hBrush_Update, 0xFF101010) DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Shadow, _ "float", $fRadius - $iWidth12 + Cos(($fShadowAngle - $fHr) * $fRad) * $m1, _ "float", $fPosY + Sin(($fShadowAngle - $fHr) * $fRad) * $m1, _ "float", $iWidth1, "float", $iHeight1) DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Update, _ "float", $fRadius - $iWidth12, _ "float", $fPosY, _ "float", $iWidth1, "float", $iHeight1) _GDIPlus_GraphicsResetTransform($hGfx) ;min If $fMin_next <> @MIN Then $bBounce = 1 Switch $bBounce Case 1 $fMin = (6 * Mod(($fMin_next + 1), 60)) + Sin($f * 1.9) * $fAmplitude If $fAmplitude = 0 Then $fMin_next = @MIN $f = 0 $fAmplitude = 3 $bBounce = 0 Else $fAmplitude -= 0.5 $fAmplitude = $fAmplitude <= 0 ? 0 : $fAmplitude $f += 1 EndIf Case Else $fMin = (6 * @MIN) EndSwitch _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, $fMin) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) $iWidth1 = $fDiameter * 0.03 $iHeight1 = $fRadius $iWidth12 = $iWidth1 / 2 $fPosY = $fDiameter * 0.1 DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Shadow, _ "float", $fRadius - $iWidth12 + Cos(($fShadowAngle - $fMin) * $fRad) * $m1, _ "float", $fPosY + Sin(($fShadowAngle - $fMin) * $fRad) * $m1, _ "float", $iWidth1, "float", $iHeight1) DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Update, _ "float", $fRadius - $iWidth12, _ "float", $fPosY, _ "float", $iWidth1, "float", $iHeight1) _GDIPlus_GraphicsResetTransform($hGfx) ;sec $fSec = 6 * (@SEC * 1.02564 + @MSEC / 1000) If $fSec >= 360 Then $fSec = 0 _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, $fSec) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) $fPosY = $fDiameter * 0.27 $fPosY2 = $fDiameter * 0.19 $iWidth1 = $fDiameter * 0.0095 $iHeight1 = $fRadius * 1.3 - $fPosY $iWidth12 = $iWidth1 / 2 $iWidth2 = $fDiameter * 0.083333 $iWidth22 = $iWidth2 / 2 ;shadow seconds DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Shadow, _ "float", $fRadius + Cos(($fShadowAngle - $fSec) * $fRad) * $m1, _ "float", $fPosY + Sin(($fShadowAngle - $fSec) * $fRad) * $m1, _ "float", $iWidth1 + $fDiameter * 0.006667, "float", $iHeight1 + $fDiameter * 0.006667) DllCall($__g_hGDIPDll, "int", "GdipFillEllipse", "handle", $hGfx, "handle", $hBrush_Shadow, _ "float", $fRadius - $iWidth22 + Cos(($fShadowAngle - $fSec) * $fRad) * $m1, _ "float", $fPosY2 + Sin(($fShadowAngle - $fSec) * $fRad) * $m1, _ "float", $iWidth2, "float", $iWidth2) ;seconds _GDIPlus_BrushSetSolidColor($hBrush_Update, 0xFFC01010) DllCall($__g_hGDIPDll, "int", "GdipFillRectangle", "handle", $hGfx, "handle", $hBrush_Update, _ "float", $fRadius - $iWidth12, _ "float", $fPosY, _ "float", $iWidth1, "float", $iHeight1) DllCall($__g_hGDIPDll, "int", "GdipFillEllipse", "handle", $hGfx, "handle", $hBrush_Update, _ "float", $fRadius - $iWidth22, _ "float", $fPosY2, _ "float", $iWidth2, "float", $iWidth2) _GDIPlus_GraphicsResetTransform($hGfx) ;button in the center DllCall($__g_hGDIPDll, "int", "GdipFillEllipse", "handle", $hGfx, "handle", $hBrush_Update, _ "float", $fRadius - $iWidth1, _ "float", $fRadius - $iWidth1, _ "float", 2 * $iWidth1, "float", 2 * $iWidth1) DllCall($__g_hGDIPDll, "int", "GdipDrawEllipse", "handle", $hGfx, "handle", $hPen_Update, _ "float", $fRadius - $iWidth1, _ "float", $fRadius - $iWidth1, _ "float", 2 * $iWidth1, "float", 2 * $iWidth1) EndFunc Func GenerateClockBg($fDiameter) Local Const $hBitmap = _GDIPlus_BitmapCreateFromScan0($fDiameter + $fDeltaShadow, $fDiameter + $fDeltaShadow), $hGfx = _GDIPlus_ImageGetGraphicsContext($hBitmap), _ $hBrush = _GDIPlus_BrushCreateSolid(0xFF000000), $fBorderSize = $fDiameter * 0.03333, _ $hEffect = _GDIPlus_EffectCreateBlur($fDiameter / 50, 0), $hPen = _GDIPlus_PenCreate(0xA0000000, $fBorderSize) _GDIPlus_GraphicsSetSmoothingMode($hGfx, 4) _GDIPlus_GraphicsSetPixelOffsetMode($hGfx, 4) _GDIPlus_GraphicsSetTextRenderingHint($hGfx, 4) _GDIPlus_GraphicsClear($hGfx, 0xFFFFFFFF) Local Const $fSize = $fDiameter * 0.95 - $fBorderSize / 2 Local $fShadow_vx = $fDiameter * 0.0095, $fShadow_vy = $fDiameter * 0.01 $fShadowAngle = ATan($fShadow_vy / $fShadow_vx) * $fDeg If $fShadow_vx < 0 And $fShadow_vy >= 0 Then $fShadowAngle += 180 If $fShadow_vx < 0 And $fShadow_vy < 0 Then $fShadowAngle -= 180 _GDIPlus_GraphicsDrawEllipse($hGfx, $fBorderSize + $fShadow_vx, $fBorderSize + $fShadow_vy, $fSize, $fSize, $hPen) _GDIPlus_BitmapApplyEffect($hBitmap, $hEffect) _GDIPlus_PenSetColor($hPen, 0xF0000000) Local Const $hBitmap_Texture = _CreateBrushedAluminum($fDiameter, $fDiameter, $fShadowAngle) Local Const $hTexture = _GDIPlus_TextureCreate($hBitmap_Texture) DllCall($__g_hGDIPDll, "int", "GdipSetPenBrushFill", "ptr", $hPen, "ptr", $hTexture) _GDIPlus_GraphicsDrawEllipse($hGfx, $fBorderSize, $fBorderSize, $fSize, $fSize, $hPen) _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, -6) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) Local $iWidth1 = $fDiameter * 0.026667, $iHeight1 = $fDiameter / 10, $iWidth12 = $iWidth1 / 2, $fPosY = $fDiameter * 0.083333, _ $iWidth2 = $fDiameter * 0.013333, $iHeight2 = $fDiameter * 0.0416667, $iWidth22 = $iWidth2 / 2 For $i = 0 to 59 _GDIPlus_GraphicsTranslateTransform($hGfx, $fRadius, $fRadius) _GDIPlus_GraphicsRotateTransform($hGfx, 6) _GDIPlus_GraphicsTranslateTransform($hGfx, -$fRadius, -$fRadius) Switch Mod($i, 5) Case 0 _GDIPlus_GraphicsFillRect($hGfx, $fRadius - $iWidth12, $fPosY, $iWidth1, $iHeight1, $hBrush) Case Else _GDIPlus_GraphicsFillRect($hGfx, $fRadius - $iWidth22, $fPosY, $iWidth2, $iHeight2, $hBrush) EndSwitch Next _GDIPlus_GraphicsResetTransform($hGfx) Local Const $hBitmap_Logo = _GDIPlus_BitmapCreateFromMemory(_Au3_Icon()) Local Const $hBitmap_Logo_Scaled = _GDIPlus_ImageResize($hBitmap_Logo, $fDiameter * 0.08, $fDiameter * 0.08) Local $aDim = _GDIPlus_ImageGetDimension($hBitmap_Logo_Scaled) _GDIPlus_GraphicsDrawImageRect($hGfx, $hBitmap_Logo_Scaled, $fRadius - $aDim[0] / 2, $fRadius / 1.75, $aDim[0], $aDim[1]) _GDIPlus_ImageDispose($hBitmap_Logo) _GDIPlus_ImageDispose($hBitmap_Logo_Scaled) Local Const $hFamily = _GDIPlus_FontFamilyCreate("Segoe Script"), $hFont = _GDIPlus_FontCreate($hFamily, $fDiameter * 0.025), $hFormat = _GDIPlus_StringFormatCreate() _GDIPlus_StringFormatSetAlign($hFormat, 1) _GDIPlus_StringFormatSetLineAlign($hFormat, 1) ;~ _GDIPlus_BrushSetSolidColor($hBrush, 0xFF400000) _GDIPlus_GraphicsDrawStringEx($hGfx, "Clock by" & @CRLF & "UEZ", $hFont, _GDIPlus_RectFCreate($fRadius - $fRadius * 0.2, $fRadius + $fRadius * 0.2, $fRadius * 0.4, $fRadius * 0.4), $hFormat, $hBrush) _GDIPlus_ImageDispose($hBitmap_Texture) _GDIPlus_BrushDispose($hTexture) _GDIPlus_FontDispose($hFont) _GDIPlus_FontFamilyDispose($hFamily) _GDIPlus_StringFormatDispose($hFormat) _GDIPlus_EffectDispose($hEffect) _GDIPlus_PenDispose($hPen) _GDIPlus_BrushDispose($hBrush) _GDIPlus_GraphicsDispose($hGfx) Return $hBitmap EndFunc Func _CreateBrushedAluminum($iW, $iH, $fLightAngle = 40, $iBlurDist = 12, $fBlurTrans = 0.6666, $fRed = 0.8, $fGreen = 0.9, $fBlue = 1, $iLightColor = 0xF0FFFFFF, $fLightSigma = 0.5, $fLightScale = 0.83) ;coded by Eukalyptus! $iBlurDist = Ceiling($iBlurDist) $iBlurDist += 1 - Mod($iBlurDist, 2) Local $iOverSize = 0 For $i = 1 To $iBlurDist Step 2 $iOverSize += $i + $i + 1 Next Local $iWO = $iW + $iOverSize ;========================================= ; Add Noise ;========================================= Local $iNoiseSize = 40 Local $hBmp_Noise = _GDIPlus_BitmapCreateFromScan0($iNoiseSize, $iNoiseSize) Local $hGfx_Noise = _GDIPlus_ImageGetGraphicsContext($hBmp_Noise) Local $tData = _GDIPlus_BitmapLockBits($hBmp_Noise, 0, 0, $iNoiseSize, $iNoiseSize, BitOR($GDIP_ILMREAD, $GDIP_ILMWRITE), $GDIP_PXF32ARGB) Local $iStride = DllStructGetData($tData, "Stride") Local $iWidth = DllStructGetData($tData, "Width") Local $iHeight = DllStructGetData($tData, "Height") Local $pScan0 = DllStructGetData($tData, "Scan0") Local $tPixel = DllStructCreate("dword[" & $iWidth * $iHeight & "];", $pScan0) Local $iAmp For $row = 0 To $iHeight - 1 For $col = 0 To $iWidth - 1 $iAmp = Random(0, 0xFF, 1) DllStructSetData($tPixel, 1, BitOR(0xFF000000, BitShift($iAmp, -16), BitShift($iAmp, -8), $iAmp), $row * $iWidth + $col + 1) Next Next _GDIPlus_BitmapUnlockBits($hBmp_Noise, $tData) ;========================================= ; Create Full NoiseBitmap ;========================================= Local $hBmp_Full = _GDIPlus_BitmapCreateFromScan0($iWO, $iH) Local $hGfx_Full = _GDIPlus_ImageGetGraphicsContext($hBmp_Full) _GDIPlus_GraphicsSetSmoothingMode($hGfx_Full, 4) _GDIPlus_GraphicsSetInterpolationMode($hGfx_Full, 3) Local $iXOff, $iYOff, $iSizeX, $iSizeY For $y = 0 To $iH Step $iNoiseSize / 2 For $x = 0 To $iWO Step $iNoiseSize / 2 $iXOff = Random(0, $iNoiseSize / 2, 1) $iYOff = Random(0, $iNoiseSize / 2, 1) $iSizeX = $iNoiseSize - $iXOff $iSizeY = $iNoiseSize - $iYOff _GDIPlus_GraphicsDrawImageRectRect($hGfx_Full, $hBmp_Noise, $iXOff, $iYOff, $iSizeX, $iSizeY, $x, $y, $iSizeX, $iSizeY) Next Next _GDIPlus_GraphicsDispose($hGfx_Noise) _GDIPlus_BitmapDispose($hBmp_Noise) ;========================================= ; MotionBlur ;========================================= Local $hBmp_Full2 = _GDIPlus_BitmapCreateFromScan0($iWO, $iH) Local $hGfx_Full2 = _GDIPlus_ImageGetGraphicsContext($hBmp_Full2) _GDIPlus_GraphicsSetSmoothingMode($hGfx_Full2, 4) _GDIPlus_GraphicsSetInterpolationMode($hGfx_Full, 3) Local $tColorMatrix = DllStructCreate("float[5]; float[5]; float[5]; float[5]; float[5];") DllStructSetData($tColorMatrix, 1, 1, 1) DllStructSetData($tColorMatrix, 2, 1, 2) DllStructSetData($tColorMatrix, 3, 1, 3) DllStructSetData($tColorMatrix, 4, $fBlurTrans, 4) DllStructSetData($tColorMatrix, 5, 1, 5) Local $hImgAttrib = _GDIPlus_ImageAttributesCreate() DllCall($__g_hGDIPDll, "int", "GdipSetImageAttributesColorMatrix", "ptr", $hImgAttrib, "int", 1, "int", 1, "struct*", $tColorMatrix, "struct*", 0, "int", 0) For $i = 1 To $iBlurDist Step 2 DllCall($__g_hGDIPDll, "int", "GdipDrawImageRectRect", "ptr", $hGfx_Full2, "ptr", $hBmp_Full, _ "float", $i, "float", 0, "float", $iWO, "float", $iH, _ "float", 0, "float", 0, "float", $iWO, "float", $iH, _ "int", 2, "ptr", $hImgAttrib, "ptr", 0, "ptr", 0) If $i >= $iBlurDist Then DllStructSetData($tColorMatrix, 1, $fRed, 1) DllStructSetData($tColorMatrix, 2, $fGreen, 2) DllStructSetData($tColorMatrix, 3, $fBlue, 3) DllStructSetData($tColorMatrix, 4, 1, 4) DllCall($__g_hGDIPDll, "int", "GdipSetImageAttributesColorMatrix", "ptr", $hImgAttrib, "int", 1, "int", 1, "struct*", $tColorMatrix, "struct*", 0, "int", 0) EndIf DllCall($__g_hGDIPDll, "int", "GdipDrawImageRectRect", "ptr", $hGfx_Full, "ptr", $hBmp_Full2, _ "float", $i + 1, "float", 0, "float", $iWO, "float", $iH, _ "float", 0, "float", 0, "float", $iWO, "float", $iH, _ "int", 2, "ptr", $hImgAttrib, "ptr", 0, "ptr", 0) Next _GDIPlus_ImageAttributesDispose($hImgAttrib) _GDIPlus_GraphicsDispose($hGfx_Full2) _GDIPlus_BitmapDispose($hBmp_Full2) _GDIPlus_GraphicsDispose($hGfx_Full) ;========================================= ; Add Light ;========================================= Local $hBmp_Alu = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Local $hGfx_Alu = _GDIPlus_ImageGetGraphicsContext($hBmp_Alu) _GDIPlus_GraphicsSetSmoothingMode($hGfx_Alu, 4) _GDIPlus_GraphicsSetInterpolationMode($hGfx_Full, 3) _GDIPlus_GraphicsDrawImage($hGfx_Alu, $hBmp_Full, -$iOverSize, 0) _GDIPlus_BitmapDispose($hBmp_Full) Local $tPointF1 = DllStructCreate("float; float;") Local $tPointF2 = DllStructCreate("float; float;") DllStructSetData($tPointF2, 2, $iH * $fLightScale) $aResult = DllCall($__g_hGDIPDll, "int", "GdipCreateLineBrush", "struct*", $tPointF1, "struct*", $tPointF2, "uint", 0, "uint", $iLightColor, "int", 0, "handle*", 0) If @error Or Not IsArray($aResult) Then Return SetError(1, 4, False) Local $hBrush = $aResult[6] _GDIPlus_LineBrushSetSigmaBlend($hBrush, $fLightSigma) _GDIPlus_LineBrushSetGammaCorrection($hBrush) DllCall($__g_hGDIPDll, "int", "GdipRotateLineTransform", "ptr", $hBrush, "float", $fLightAngle, "int", 0) _GDIPlus_GraphicsFillRect($hGfx_Alu, 0, 0, $iW, $iH, $hBrush) _GDIPlus_BrushDispose($hBrush) _GDIPlus_GraphicsDispose($hGfx_Alu) Return $hBmp_Alu EndFunc ;==>_CreateBrushedAluminum ;Code below was generated by: 'File to Base64 String' Code Generator v1.20 Build 2018-02-02 Func _Au3_Icon($bSaveBinary = False, $sSavePath = @ScriptDir) Local $Au3_Icon $Au3_Icon &= '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' $Au3_Icon &= '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' $Au3_Icon &= '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' $Au3_Icon &= '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' $Au3_Icon &= 'J2eYb9RTMPdn1GLBcJhN33WUCcQNCMWEUwMF2+st0RCsAkf94W7/ePAVzO4Ag1MNzNDcPrP+B2aBEALARLzBJDp7B10CHnwCIQct59l/iAlBaUSgBoJRBp2KdxHo7F3FiFaraZ0Fb3kRDCyr/pz8pyIbfRa4B+hpBhLAti9cfmahnjyd53kBRFYBwFSt1+vZOC8hSkHnFZsygCmg87zcvwSIMR2bDcyUrFSAaSFCCeWIWr1hV9YbMspKjSPnrt/e/fdsNPg7TL9xWnyYn2qkYL/ovVPVWVLNBGA4HNLrDzmz1rbVVsMIGRVtugoFWDE3MjMzp4HmRGSIQBXNybfOLC/BbGqgGFq93uCJc21GeaFR5P0oK3pl0Bugz6P57R+U0wgoN7fO/8Zyq/nRooJhEYZUsLIsqDqA1Bs1lpotW9IgiXfcORqJlSNwCfgIxE84H78FYHofCupRCfjJp8K9wz4BD24SQVtpt+XiRsOqTY2A6/aGt1+9c+8vLBSfI4RXgIzTQQSki43axzHVEILI/Eua9fsDd9TtXd/c2Iy9d49kQfP2YhotNWJ5dW/EMJusguBicBMTcwPCFKqYQCgDg1FGXhqIWpQmnD/Tpplig9EYAesNsnu37tz7S9Pw14Tsf4AeD0F0/tLlReekphoEEDAB0SzL5ODoqI/qn+0e9ZezUp9dbjbOJ/W0aRAurNUlK+vubndsw6zAilwQARy4+SqIlZShIGt2LIQgca1h651l1tt1iqKQ42EIceTdzn7v+b39/U+L889j4VtT8Q+HfOUbL3zq7Ob6J800VlWbfR3W3b193z06/EPEfwoXP+ai+BdWO+0PFEXIq/3wBjAwVGazd29U0q+YFYGghjFF7KDmApVGGQ2PbWOtI1WzIC8Vg1Bp94fdwau37+78KdhzaHgFLbpA4OEgwmzNmPR8RCZDVuj2elG3e/S5NIn/KMuLQyR+Ucv80zs7ey+BbVVinIjUVpcXL816O82613Zd' $Au3_Icon &= 'gMTEOQcCqIo4RlkpVRu2Uk129w8DneWxeO9v3N79l+pCnuVfxvRfCdkLwIDXAPnSf33tU+fOnvktEXNFUUi1af3e3sHXNRQfA746P0+p4eJlxJ9D5I3OR09fPnfml6vD5m6rubCdRC4FAUDNdDTOe977ej2NUjOjdzxgNBwVh73h3/ooGXrvk2w8esE0PI9Nus11oM9rhHzhi//xtpXV1c+msW92uz0ODw6fA/1t4Es8GDEu3kDcFRclP6Ua2nGcbMdxvI4hzossLdQvAeRFeS/Liv00jddUtej2Bs9pKP4TDYdgOdBD3C4h2wcCrx1M/8kn7j2Y/gxwM03Tz2RZdouHo4GLOuA2EGliNBGpY3qM8+uAoeV3MBvjXBucTJ5dfIcwGgIGlIDxOjAx8DrhgQioEdUjxCmmEQDlaDATGTPF+JRKv24Dbp71GX9M8L84Jo46QVTs6gAAAABJRU5ErkJggg==' Local $bString = _WinAPI_Base64Decode($Au3_Icon) If @error Then Return SetError(1, 0, 0) $bString = Binary($bString) If $bSaveBinary Then Local Const $hFile = FileOpen($sSavePath & "\au3-icon2.png", 18) If @error Then Return SetError(2, 0, $bString) FileWrite($hFile, $bString) FileClose($hFile) EndIf Return $bString EndFunc ;==>_Au3_Icon Func _WinAPI_Base64Decode($sB64String) Local $aCrypt = DllCall("Crypt32.dll", "bool", "CryptStringToBinaryA", "str", $sB64String, "dword", 0, "dword", 1, "ptr", 0, "dword*", 0, "ptr", 0, "ptr", 0) If @error Or Not $aCrypt[0] Then Return SetError(1, 0, "") Local $bBuffer = DllStructCreate("byte[" & $aCrypt[5] & "]") $aCrypt = DllCall("Crypt32.dll", "bool", "CryptStringToBinaryA", "str", $sB64String, "dword", 0, "dword", 1, "struct*", $bBuffer, "dword*", $aCrypt[5], "ptr", 0, "ptr", 0) If @error Or Not $aCrypt[0] Then Return SetError(2, 0, "") Return DllStructGetData($bBuffer, 1) EndFunc ;==>_WinAPI_Base64Decode  
      If you want to run in x64 mode please use AutoIt version 3.3.14.3 since the bug in function _GDIPlus_EffectCreate() has been fixed!
       
    • By Sidley
      Hello folks, I've been working on a couple of GDI+ gauges, they need a bit of polish here and there I'd appreciate it if you guys/girls could play around and give me some suggestions. Cheers.
       
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Outfile=Gauges With Sliders.exe #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** #include <GUIConstants.au3> #include <GDIplus.au3> #include <ColorConstants.au3> #include <Array.au3> Global Const $width = @DesktopWidth * 3 / 4 Global Const $height = @DesktopHeight Global $title = "GDI+" ; Build your GUI here Opt("GUIOnEventMode", 1) Global $hwnd = GUICreate($title, @DesktopWidth, @DesktopHeight, -1, -1, $WS_SIZEBOX) GUISetOnEvent($GUI_EVENT_CLOSE, "close") GUISetState() #Region Sliders Global $VariableMaxValue = 100 Global $SecondaryMaxValue = 100 Global $VariableMinValue = 0 Global $HexLabel = GUICtrlCreateLabel("Hex Value: ", @DesktopWidth - 300, 50, 150, 20) GUICtrlSetColor($HexLabel, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $idSliderThick = GUICtrlCreateSlider(@DesktopWidth - 300, 100, 250, 20) GUICtrlSetLimit(-1, 240, 0) ; change min/max value GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $ThickLabel = GUICtrlCreateLabel("Thickness Value: " & GUICtrlRead($idSliderThick), @DesktopWidth - 300, 120, 150, 20) GUICtrlSetColor($ThickLabel, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $idSliderVal = GUICtrlCreateSlider(@DesktopWidth - 300, 150, 250, 20) GUICtrlSetLimit(-1, $VariableMaxValue, $VariableMinValue) ; change min/max value GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $ValLabel = GUICtrlCreateLabel("Variable Value: " & GUICtrlRead($idSliderVal), @DesktopWidth - 300, 170, 150, 20) GUICtrlSetColor($ValLabel, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $idSliderScale = GUICtrlCreateSlider(@DesktopWidth - 300, 200, 250, 20) GUICtrlSetLimit(-1, 20, 0) ; change min/max value GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $ScaleLabel = GUICtrlCreateLabel("Scale Value: " & (GUICtrlRead($idSliderScale) * .1), @DesktopWidth - 300, 220, 150, 20) GUICtrlSetColor($ScaleLabel, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $idStartAngleScale = GUICtrlCreateSlider(@DesktopWidth - 300, 250, 250, 20) GUICtrlSetLimit(-1, 360, 0) ; change min/max value GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $StartAngleLabel = GUICtrlCreateLabel("Angle Value: " & GUICtrlRead($idStartAngleScale), @DesktopWidth - 300, 270, 150, 20) GUICtrlSetColor($StartAngleLabel, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $idSweepScale = GUICtrlCreateSlider(@DesktopWidth - 300, 300, 250, 20) GUICtrlSetLimit(-1, 360, 0) ; change min/max value GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $SweepLabel = GUICtrlCreateLabel("Sweep Value: " & GUICtrlRead($idSweepScale), @DesktopWidth - 300, 320, 150, 20) GUICtrlSetColor($SweepLabel, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $idCheckmarksScale = GUICtrlCreateSlider(@DesktopWidth - 300, 350, 250, 20) GUICtrlSetLimit(-1, 20, 0) ; change min/max value GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $CheckmarkLabel = GUICtrlCreateLabel("No. of Checkmarks: " & GUICtrlRead($idCheckmarksScale), @DesktopWidth - 300, 370, 150, 20) GUICtrlSetColor($CheckmarkLabel, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $idVarMin = GUICtrlCreateSlider(@DesktopWidth - 300, 450, 250, 20) GUICtrlSetLimit(-1, 0, -50) ; change min/max value GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $MinLabel = GUICtrlCreateLabel("Min Value: " & GUICtrlRead($idVarMin), @DesktopWidth - 300, 470, 150, 20) GUICtrlSetColor($MinLabel, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $RadioGroup1 = GUICtrlCreateGroup("", @DesktopWidth - 300, 500, 200, 50) Global $clockwiseCtrl = GUICtrlCreateRadio("Clockwise", @DesktopWidth - 280, 520, 80, 20) GUICtrlSetState(-1, $GUI_CHECKED) GUICtrlSetColor(-1, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $antiClockwiseCtrl = GUICtrlCreateRadio("Anti-clockwise", @DesktopWidth - 200, 520, 85, 20) GUICtrlSetColor(-1, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $RadioGroup2 = GUICtrlCreateGroup("", @DesktopWidth - 300, 550, 200, 50) Global $RadialCtrl = GUICtrlCreateRadio("Radial", @DesktopWidth - 280, 570, 80, 20) GUICtrlSetState(-1, $GUI_CHECKED) GUICtrlSetColor(-1, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) Global $SquareCtrl = GUICtrlCreateRadio("Linear", @DesktopWidth - 200, 570, 85, 20) GUICtrlSetColor(-1, $COLOR_WHITE) GUICtrlSetResizing(-1, $GUI_DOCKSIZE + $GUI_DOCKVCENTER) GUICtrlSetData($idSliderThick, 35) GUICtrlSetData($idSliderScale, 10) GUICtrlSetData($idStartAngleScale, 180) GUICtrlSetData($idSweepScale, 180) GUICtrlSetData($idCheckmarksScale, 10) #EndRegion Sliders GUISetBkColor(0x303030) Global $aWindowSize = WinGetClientSize($hwnd) ; Load your GDI+ resources here: _GDIPlus_Startup() Global $graphics = _GDIPlus_GraphicsCreateFromHWND($hwnd) Global $bitmap = _GDIPlus_BitmapCreateFromGraphics($width, $height, $graphics) Global $backbuffer = _GDIPlus_ImageGetGraphicsContext($bitmap) While 1 _GDIPlus_GraphicsClear($backbuffer, 0xFF303030) Sleep(50) #Region Test Variables Global $Thickness = GUICtrlRead($idSliderThick) Global $Variable = GUICtrlRead($idSliderVal) Global $tValue = 0xFF000000 Global $rValue = 0x00FF0000 Global $gValue = BitShift((255 - (($Variable / $VariableMaxValue) * 255)), -8) Global $bValue = 0x00 Global $ScalingFactor = GUICtrlRead($idSliderScale) / 10 GUICtrlSetData($HexLabel, "Hex Value: " & HEX(BitOR($tValue, $rValue, $gValue, $bValue))) Global $PenColour = ("0x" & HEX(BitOR($tValue, $rValue, $gValue, $bValue))) GUICtrlSetData($ValLabel, "Variable Value: " & GUICtrlRead($idSliderVal)) GUICtrlSetData($ThickLabel, "Thickness Value: " & GUICtrlRead($idSliderThick)) GUICtrlSetData($ScaleLabel, "Scale Value: " & (GUICtrlRead($idSliderScale) * .1)) GUICtrlSetData($StartAngleLabel, "Angle Value: " & GUICtrlRead($idStartAngleScale)) GUICtrlSetData($SweepLabel, "Sweep Value: " & GUICtrlRead($idSweepScale)) GUICtrlSetData($CheckmarkLabel, "No. Of Checkmarks: " & GUICtrlRead($idCheckmarksScale)) GUICtrlSetData($MinLabel, "Min Value: " & GUICtrlRead($idVarMin)) GUICtrlSetLimit($idSliderVal, $VariableMaxValue, $VariableMinValue) Local $Radius = 300 If GUICtrlRead($clockwiseCtrl) = $GUI_CHECKED Then Local $Clockwise = True Else Local $Clockwise = False EndIf Local $StartAngle = GUICtrlRead($idStartAngleScale) Local $SweepAngle = GUICtrlRead($idSweepScale) Local $CentrePointX = 500 Local $CentrePointY = 500 Local $NoOfCheckmarks = GUICtrlRead($idCheckmarksScale) Local $CheckLength = 15 Local $AllowedLimit = 75 Local $VariableLimit = True Local $VariableMinValue = GUICtrlRead($idVarMin) #EndRegion Test Variables #Region Function Call If GUICtrlRead($RadialCtrl) = $GUI_CHECKED Then _GDIPlus_GraphicsDrawPath($backbuffer, _Gauges_DrawRadialGauge($backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $Variable, $ScalingFactor, $Clockwise, $StartAngle, $SweepAngle, $VariableMaxValue, $NoOfCheckmarks, $CheckLength, $VariableLimit, $AllowedLimit, $VariableMinValue)) GUICtrlSetState($idSliderThick, $GUI_SHOW) GUICtrlSetState($ThickLabel, $GUI_SHOW) GUICtrlSetState($idStartAngleScale, $GUI_SHOW) GUICtrlSetState($StartAngleLabel, $GUI_SHOW) GUICtrlSetState($idSweepScale, $GUI_SHOW) GUICtrlSetState($SweepLabel, $GUI_SHOW) GUICtrlSetState($RadioGroup1, $GUI_SHOW) GUICtrlSetState($clockwiseCtrl, $GUI_SHOW) GUICtrlSetState($antiClockwiseCtrl, $GUI_SHOW) Else _GDIPlus_GraphicsDrawPath($backbuffer, _Gauges_DrawLinearGauge($backbuffer, $CentrePointX, $CentrePointY, 600, 100, $Variable, $ScalingFactor, $NoOfCheckmarks, $CheckLength, $VariableMaxValue, $VariableLimit, $AllowedLimit, $VariableMinValue)) GUICtrlSetState($idSliderThick, $GUI_HIDE) GUICtrlSetState($ThickLabel, $GUI_HIDE) GUICtrlSetState($idStartAngleScale, $GUI_HIDE) GUICtrlSetState($StartAngleLabel, $GUI_HIDE) GUICtrlSetState($idSweepScale, $GUI_HIDE) GUICtrlSetState($SweepLabel, $GUI_HIDE) GUICtrlSetState($RadioGroup1, $GUI_HIDE) GUICtrlSetState($clockwiseCtrl, $GUI_HIDE) GUICtrlSetState($antiClockwiseCtrl, $GUI_HIDE) EndIf #EndRegion Function Call _GDIPlus_GraphicsDrawImageRect($graphics, $bitmap, 0, 0, $width, $height) WEnd Func close() _GDIPlus_GraphicsDispose($backbuffer) _GDIPlus_BitmapDispose($bitmap) _GDIPlus_GraphicsDispose($graphics) _GDIPlus_Shutdown() Exit EndFunc ;==>close #Region Functions #Region Draw Linear Gauge ; #FUNCTION# ==================================================================================================================== ; Name...........: _Gauges_DrawLinearGauge ; Description ...: Creates a horizontal or vertical gauge in the graphics backbuffer ; Syntax.........: _Gauges_DrawLinearGauge(ByRef $backbuffer, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $Variable, [$ScalingFactor = 1, [$NoOfCheckmarks = 6, [$CheckLength = 20, ; + [$VariableMaxValue = 256, [$VariableLimit = False, [$AllowedLimit = 0, [$VariableMinValue = 0]]]]]]] ) ; Parameters ....: $backbuffer - [byref] The graphics object to draw the gauge to. ; $CentrePointX - The horizontal coordinate of the centre of the gauge. ; $CentrePointY - The vertical coordinate of the centre of the gauge. ; $GaugeWidth - The width of the gauge (Duh). ; $GaugeHeight - The height of the gauge. ; $Variable - The variable used to change the gauge. ; $ScalingFactor - [optional] Scales the gauge by this factor. Default is 1, i.e. no scaling. ; $NoOfCheckmarks - [optional] The number of dashes indicating a scale around the gauge. Default is 6. ; $CheckLength - [optional] The length of the checkmarks in pixels. Default is 20. ; $VariableMaxValue - [optional] The maximum value of the variable. Default is 256. ; $VariableLimit - [optional] Boolean, if TRUE, displays a red limit indicator on the scale. Default is FALSE. ; $AllowedLimit -[optional] The value of the above limit if it is drawn. Default is 0. ; $VariableMinValue -[optional] The minimum value of the variable. Only used if negative numbers are required. Default is 0. ; Author ........: Simon Renardson (Sidley) ; Modified.......: ; Remarks .......: There is a more comprehensive function available, but I deemed it overkill for the majority of people. ; Related .......: _GDIPlus_ ; Example .......: Yes ; =============================================================================================================================== ;Draw a Linear gauge to the screen Func _Gauges_DrawLinearGauge(ByRef $backbuffer, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $Variable, $ScalingFactor = 1, $NoOfCheckmarks = 6, $CheckLength = 20, $VariableMaxValue = 256, $VariableLimit = False, $AllowedLimit = 0, $VariableMinValue = 0) If $Variable >= 0 Then Local $BrushColour = ("0xFF4BF221") Else Local $BrushColour = ("0xFFFF0000") EndIf If $GaugeWidth >= $GaugeHeight Then Local $GaugeBrush = _GDIPlus_HatchBrushCreate(1, 0x00000000, $BrushColour) ;Set to vertical hatch if the gauge is horizontal Else Local $GaugeBrush = _GDIPlus_HatchBrushCreate(0, 0x00000000, $BrushColour) ;Set to horizontal hatch if the gauge is vertical EndIf Local $TextBrush = _GDIPlus_BrushCreateSolid($BrushColour) Local $Path = _GDIPlus_PathCreate() Local $hPen = _GDIPlus_PenCreate("0xFF96A29F", 2 * $ScalingFactor) ; Off-white pen for outlines Local $AllowedPen = _GDIPlus_PenCreate("0xFFFF0000", 8 * $ScalingFactor) ;Red pen for allowed speed indicators If $GaugeWidth >= $GaugeHeight Then ;If the gauge is to be length wise _GDIPlus_PathAddLine($Path, $CentrePointX - ((($GaugeWidth / 2) + $VariableMinValue * ($GaugeWidth / ($VariableMaxValue - $VariableMinValue))) * $ScalingFactor), ($CentrePointY + ($GaugeHeight / 2) * $ScalingFactor), $CentrePointX - ((($GaugeWidth / 2) + $VariableMinValue * ($GaugeWidth / ($VariableMaxValue - $VariableMinValue))) * $ScalingFactor) + ($Variable * ($GaugeWidth / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor), ($CentrePointY + ($GaugeHeight / 2) * $ScalingFactor)) _GDIPlus_PathAddLine($Path, $CentrePointX - ((($GaugeWidth / 2) + $VariableMinValue * ($GaugeWidth / ($VariableMaxValue - $VariableMinValue))) * $ScalingFactor) + ($Variable * ($GaugeWidth / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor), ($CentrePointY - ($GaugeHeight / 2) * $ScalingFactor), $CentrePointX - ((($GaugeWidth / 2) + $VariableMinValue * ($GaugeWidth / ($VariableMaxValue - $VariableMinValue))) * $ScalingFactor), ($CentrePointY - ($GaugeHeight / 2) * $ScalingFactor)) _GDIPlus_PathCloseFigure($Path) Else ;If the gauge is to be height wise _GDIPlus_PathAddLine($Path, ($CentrePointX + ($GaugeWidth / 2) * $ScalingFactor), ($CentrePointY + (($GaugeHeight / 2) * $ScalingFactor)) + ($VariableMinValue * ($GaugeHeight / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor), ($CentrePointX + ($GaugeWidth / 2) * $ScalingFactor), ($CentrePointY + (($GaugeHeight / 2) * $ScalingFactor)) + ($VariableMinValue * ($GaugeHeight / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor) - $Variable * ($GaugeHeight / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor) _GDIPlus_PathAddLine($Path, ($CentrePointX - ($GaugeWidth / 2) * $ScalingFactor), ($CentrePointY + (($GaugeHeight / 2) * $ScalingFactor)) + ($VariableMinValue * ($GaugeHeight / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor) - $Variable * ($GaugeHeight / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor, ($CentrePointX - ($GaugeWidth / 2) * $ScalingFactor), ($CentrePointY + (($GaugeHeight / 2) * $ScalingFactor)) + ($VariableMinValue * ($GaugeHeight / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor)) _GDIPlus_PathCloseFigure($Path) EndIf _GDIPlus_GraphicsFillPath($backbuffer, $Path, $GaugeBrush) ;Draw the gauge _DrawBar($backbuffer, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $VariableMaxValue, $VariableMinValue, $hPen, $ScalingFactor) ;Draw the outline for the gauge _DrawLinearGaugeCheckMarks($backbuffer, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $ScalingFactor, $VariableMaxValue, $NoOfCheckmarks, $CheckLength, $hPen) ;Draw the checkmarks for the gauge If $VariableLimit Then _DrawLinearAllowedSpeed($backbuffer, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $VariableMaxValue, $AllowedLimit, $AllowedPen, $ScalingFactor, $VariableLimit) ;Draw the allowed speed indicator(s) for the gauge EndIf _LinearGaugeText($backbuffer, $Variable, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $ScalingFactor, $TextBrush) ;Put the gauge text above the gauge _GDIPlus_PathDispose($Path) ;Tidy up _GDIPlus_BrushDispose($GaugeBrush) _GDIPlus_PenDispose($hPen) _GDIPlus_PenDispose($AllowedPen) _GDIPlus_BrushDispose($TextBrush) EndFunc ;==>_DrawLinearGauge ;Draw the text for the main gauge Func _LinearGaugeText(ByRef $backbuffer, $Variable, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $ScalingFactor, ByRef $TextBrush) Local $FontSize = 80 * $ScalingFactor ;Linear gauge font size Local $Path = _GDIPlus_PathCreate() Local $Format = _GDIPlus_StringFormatCreate() Local $Family = _GDIPlus_FontFamilyCreate("Agency FB") ;Centre text font Local $Font = _GDIPlus_FontCreate($Family, $FontSize, 2) _GDIPlus_StringFormatSetAlign($Format, 2) ;Right align _GDIPlus_GraphicsSetSmoothingMode($backbuffer, 2) ;Change smoothing mode for text If $GaugeWidth >= $GaugeHeight Then Local $Layout = _GDIPlus_RectFCreate($CentrePointX - ($FontSize * $ScalingFactor / 2), $CentrePointY - ($GaugeHeight / 2 * $ScalingFactor) - $FontSize * 1.5 * $ScalingFactor) ;Set text position for inner text Else Local $Layout = _GDIPlus_RectFCreate($CentrePointX - ($GaugeWidth / 2) * $ScalingFactor - $FontSize * 2, ($CentrePointY - $FontSize * $ScalingFactor / 2)) ;Set text positionfor inner text EndIf _GDIPlus_PathAddString($Path, $Variable, $Layout, $Family, 0, $FontSize * $ScalingFactor) _GDIPlus_GraphicsFillPath($backbuffer, $Path, $TextBrush) $Layout = 0 _GDIPlus_PathDispose($Path) _GDIPlus_FontDispose($Font) _GDIPlus_StringFormatDispose($Format) _GDIPlus_FontFamilyDispose($Family) EndFunc ;==>_LinearGaugeText ;Draw the outline of the gauge Func _DrawBar(ByRef $backbuffer, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $VariableMaxValue, $VariableMinValue, ByRef $hPen, $ScalingFactor = 1) Local $Path = _GDIPlus_PathCreate() _GDIPlus_PathAddLine($Path, $CentrePointX - ($GaugeWidth / 2) * $ScalingFactor, $CentrePointY - ($GaugeHeight / 2) * $ScalingFactor, $CentrePointX + ($GaugeWidth / 2) * $ScalingFactor, $CentrePointY - ($GaugeHeight / 2) * $ScalingFactor) _GDIPlus_PathAddLine($Path, $CentrePointX + ($GaugeWidth / 2) * $ScalingFactor, $CentrePointY + ($GaugeHeight / 2) * $ScalingFactor, $CentrePointX - ($GaugeWidth / 2) * $ScalingFactor, $CentrePointY + ($GaugeHeight / 2) * $ScalingFactor) _GDIPlus_PathCloseFigure($Path) If $GaugeWidth >= $GaugeHeight Then _GDIPlus_GraphicsDrawLine($backbuffer, $CentrePointX - ($GaugeWidth / 2 * $ScalingFactor) - $VariableMinValue * ($GaugeWidth / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor, $CentrePointY - ($GaugeHeight / 2) * $ScalingFactor, $CentrePointX - ($GaugeWidth / 2 * $ScalingFactor) - $VariableMinValue * ($GaugeWidth / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor, $CentrePointY + ($GaugeHeight / 2) * $ScalingFactor, $hPen) Else _GDIPlus_GraphicsDrawLine($backbuffer, $CentrePointX - ($GaugeWidth / 2 * $ScalingFactor), ($CentrePointY + (($GaugeHeight / 2) * $ScalingFactor)) + ($VariableMinValue * ($GaugeHeight / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor), $CentrePointX + ($GaugeWidth / 2 * $ScalingFactor), ($CentrePointY + (($GaugeHeight / 2) * $ScalingFactor)) + ($VariableMinValue * ($GaugeHeight / ($VariableMaxValue - $VariableMinValue)) * $ScalingFactor), $hPen) EndIf _GDIPlus_GraphicsDrawPath($backbuffer, $Path, $hPen) ;Draw the outline _GDIPlus_PathDispose($Path) EndFunc ;==>_DrawBar ;Draw the checkmarks Func _DrawLinearGaugeCheckMarks(ByRef $backbuffer, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $ScalingFactor, $VariableMaxValue, $NoOfCheckmarks, $CheckLength, ByRef $hPen) Local $TextBrush = _GDIPlus_BrushCreateSolid("0xFFFFFFFF") ;Solid white brush for the checkmarks Local $aPoints[$NoOfCheckmarks][2] ;Two cartesian coordinates for each checkmark Local $aMarkText[$NoOfCheckmarks] ; The text for each checkmark ;Create the font for the checkmarks Local $FontSize = 15 * $ScalingFactor ;The font size (Scaled) Local $Format = _GDIPlus_StringFormatCreate() Local $Family = _GDIPlus_FontFamilyCreate("Agency FB") Local $Font = _GDIPlus_FontCreate($Family, $FontSize, 2) For $i = 0 to($NoOfCheckmarks - 1) $aMarkText[$i] = Round($VariableMinValue + (($VariableMaxValue - $VariableMinValue) / ($NoOfCheckmarks - 1)) * $i) Next If $GaugeWidth >= $GaugeHeight Then _GDIPlus_GraphicsDrawLine($backbuffer, $CentrePointX - ($GaugeWidth / 2) * $ScalingFactor, $CentrePointY - ($GaugeHeight / 2 + 10) * $ScalingFactor, $CentrePointX + ($GaugeWidth / 2) * $ScalingFactor, $CentrePointY - ($GaugeHeight / 2 + 10) * $ScalingFactor, $hPen) For $i = 0 to($NoOfCheckmarks - 1) ;Set the coordinates of each checkmark $aPoints[$i][0] = ($CentrePointX - ($GaugeWidth / 2) * $ScalingFactor) + ($GaugeWidth * $ScalingFactor / ($NoOfCheckmarks - 1)) * $i ;Set x position depending on the number of checkmarks and the length of the gauge $aPoints[$i][1] = $CentrePointY - ($GaugeHeight / 2 + 10) * $ScalingFactor ;Height remains uniform Next For $i = 0 to($NoOfCheckmarks - 1) _GDIPlus_GraphicsDrawLine($backbuffer, $aPoints[$i][0], $aPoints[$i][1], $aPoints[$i][0], ($aPoints[$i][1] - $CheckLength * $ScalingFactor), $hPen) ;Draw a line $Checklength long $Layout = _GDIPlus_RectFCreate(($aPoints[$i][0] - $FontSize), ($aPoints[$i][1] - $CheckLength * $ScalingFactor - ($FontSize * 1.5) * $ScalingFactor), 0, 0) _GDIPlus_GraphicsDrawStringEx($backbuffer, $aMarkText[$i], $Font, $Layout, $Format, $TextBrush) ;Draw the sext for the checkmark Next Else _GDIPlus_GraphicsDrawLine($backbuffer, $CentrePointX - ($GaugeWidth / 2 * $ScalingFactor) - 10 * $ScalingFactor, $CentrePointY + ($GaugeHeight / 2) * $ScalingFactor, $CentrePointX - ($GaugeWidth / 2 * $ScalingFactor) - 10 * $ScalingFactor, $CentrePointY - ($GaugeHeight / 2) * $ScalingFactor, $hPen) For $i = 0 to($NoOfCheckmarks - 1) $aPoints[$i][0] = $CentrePointX - ($GaugeWidth / 2 + 10) * $ScalingFactor $aPoints[$i][1] = ($CentrePointY + ($GaugeHeight / 2) * $ScalingFactor) - ($GaugeHeight * $ScalingFactor / ($NoOfCheckmarks - 1)) * $i Next For $i = 0 to($NoOfCheckmarks - 1) _GDIPlus_GraphicsDrawLine($backbuffer, $aPoints[$i][0], $aPoints[$i][1], $aPoints[$i][0] - $CheckLength * $ScalingFactor, $aPoints[$i][1], $hPen) $Layout = _GDIPlus_RectFCreate(($aPoints[$i][0] - $CheckLength * $ScalingFactor - $FontSize * 2.5), $aPoints[$i][1] - $FontSize / 1.5, 0, 0) _GDIPlus_GraphicsDrawStringEx($backbuffer, $aMarkText[$i], $Font, $Layout, $Format, $TextBrush) Next EndIf $Layout = 0 _GDIPlus_BrushDispose($TextBrush) _GDIPlus_FontDispose($Font) _GDIPlus_StringFormatDispose($Format) _GDIPlus_FontFamilyDispose($Family) EndFunc ;==>_DrawLinearGaugeCheckMarks Func _DrawLinearAllowedSpeed(ByRef $backbuffer, $CentrePointX, $CentrePointY, $GaugeWidth, $GaugeHeight, $MaxValue, $AllowedLimit, ByRef $AllowedPen, $ScalingFactor, $PrimaryAllowedSpeed) Local $Path = _GDIPlus_PathCreate() If $PrimaryAllowedSpeed Then If $GaugeWidth >= $GaugeHeight Then _GDIPlus_PathAddLine($Path, $CentrePointX - ($GaugeWidth / 2) * $ScalingFactor, $CentrePointY - ($GaugeHeight / 2 + 15) * $ScalingFactor + 3 * $ScalingFactor, ($CentrePointX - (($GaugeWidth / 2) * $ScalingFactor)) + ($GaugeWidth * $AllowedLimit / 100 * $ScalingFactor), $CentrePointY - ($GaugeHeight / 2 + 15) * $ScalingFactor + 3 * $ScalingFactor) Else _GDIPlus_PathAddLine($Path, $CentrePointX - ($GaugeWidth / 2) * $ScalingFactor - 10 * $ScalingFactor, $CentrePointY + ($GaugeHeight / 2) * $ScalingFactor, $CentrePointX - ($GaugeWidth / 2) * $ScalingFactor - 10 * $ScalingFactor, ($CentrePointY + ($GaugeHeight / 2) * $ScalingFactor) - ($GaugeHeight * $AllowedLimit / 100 * $ScalingFactor)) EndIf EndIf _GDIPlus_GraphicsDrawPath($backbuffer, $Path, $AllowedPen) _GDIPlus_PathDispose($Path) EndFunc ;==>_DrawLinearAllowedSpeed #EndRegion Draw Linear Gauge #Region Draw Radial Gauge ; #FUNCTION# ==================================================================================================================== ; Name...........: _Gauges_DrawRadialGauge ; Description ...: Creates a radial gauge in the graphics backbuffer ; Syntax.........: _Gauges_DrawRadialGauge(ByRef $backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $Variable, $ScalingFactor = 1, $Clockwise = True, $StartAngle = 0, ; + $SweepAngle = 180, $NoOfCheckmarks = 6, $CheckLength = 20, $VariableMaxValue = 256, $VariableLimit = True, $AllowedLimit = 0, $VariableMinValue = 0) ; Parameters ....: $backbuffer - [byref] The graphics object to draw the gauge to. ; $CentrePointX - The horizontal coordinate of the centre of the gauge. ; $CentrePointY - The vertical coordinate of the centre of the gauge. ; $Radius - The radius of the outer edge of the gauge. ; $Thickness - The thickness of the gauge in pixels. ; $Variable - The variable used to change the gauge. ; $ScalingFactor - [optional] Scales the gauge by this factor. Default is 1, i.e. no scaling. ; $Clockwise - [optional] Boolean, determines whether the gauge fills clockwise or anti-clockwise. Default is TRUE, i.e. clockwise. ; $StartAngle - [optional] The starting angle of the gauge. Default is 0 (East). ; $SweepAngle - [optional] The sweep angle of the gauge (How many degrees it rotates through). The default is 180. ; $NoOfCheckmarks - [optional] The number of dashes indicating a scale around the gauge. Default is 6. ; $CheckLength - [optional] The length of the checkmarks in pixels. Default is 20. ; $VariableMaxValue - [optional] The maximum value of the variable. Default is 256. ; $VariableLimit - [optional] Boolean, if TRUE, displays a red limit indicator on the scale. Default is FALSE. ; $AllowedLimit -[optional] The value of the above limit if it is drawn. Default is 0. ; $VariableMinValue -[optional] The minimum value of the variable. Only used if negative numbers are required. Default is 0. ; Author ........: Simon Renardson (Sidley) ; Modified.......: ; Remarks .......: There is a more comprehensive function available, but I deemed it overkill for the majority of people. ; Related .......: _GDIPlus_ ; Example .......: Yes ; =============================================================================================================================== ;Draw Gauge (Speed/Load Level) ;Creates Completed Radial Gauge ;~ _DrawRadialGauge($CentrePointX, $CentrePointY, $Radius, $Thickness, $Variable, [$ScalingFactor = 1, [$Clockwise = True, [$StartAngle = 0, [$SweepAngle = 180, [$MaxValue = 256, [$NoOfCheckmarks = 10, [$CheckLength = 20]]]]]]]) Func _Gauges_DrawRadialGauge(ByRef $backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $Variable, $ScalingFactor = 1, $Clockwise = True, $StartAngle = 0, $SweepAngle = 180, $NoOfCheckmarks = 6, $CheckLength = 20, $VariableMaxValue = 256, $VariableLimit = True, $AllowedLimit = 0, $VariableMinValue = 0) Local $BrushColour = ("0x" & HEX(BitOR(0xFFFF0000, BitShift((255 - (($Variable / $VariableMaxValue) * 255)), -8)))) Local $GaugeBrush = _GDIPlus_HatchBrushCreate(39, 0xFF000000, $BrushColour) Local $TextBrush = _GDIPlus_BrushCreateSolid($BrushColour) Local $Path = _GDIPlus_PathCreate() Local $hPen = _GDIPlus_PenCreate("0xFF96A29F", 2 * $ScalingFactor) ;Pen colour Local $AllowedPen = _GDIPlus_PenCreate("0xFFFF0000", 10 * $ScalingFactor) _GDIPlus_GraphicsSetSmoothingMode($backbuffer, 2) ;TODO may need to be removed If $Clockwise Then ;If clockwise rotation _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle - $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue)), $Variable * $SweepAngle / ($VariableMaxValue - $VariableMinValue)) ;Add outer arc of gauge $Radius -= ($Thickness * $ScalingFactor) ;Reduce radius for inner arc by the thickness of the gauge _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle - $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue)) + ($Variable * $SweepAngle / ($VariableMaxValue - $VariableMinValue)), (-1 * $Variable * $SweepAngle / ($VariableMaxValue - $VariableMinValue))) ;Add inner arc of Gauge Else ;If anti-clockwise rotation _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle + $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue)), (-1 * $Variable * $SweepAngle / ($VariableMaxValue - $VariableMinValue))) ;Add outer arc of gauge $Radius -= ($Thickness * $ScalingFactor) ;Reduce radius for inner arcby the thickness of the gauge _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle + $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue)) - ($Variable * $SweepAngle / ($VariableMaxValue - $VariableMinValue)), $Variable * $SweepAngle / ($VariableMaxValue - $VariableMinValue)) ;Add inner arc of Gauge EndIf $Radius += ($Thickness * $ScalingFactor) ;Return radius to original size _GDIPlus_PathCloseFigure($Path) ;Close the two arcs _GDIPlus_GraphicsFillPath($backbuffer, $Path, $GaugeBrush) ;Fill the gauge and centre text with colour _DrawRadialGaugeText($backbuffer, $Variable, $CentrePointX, $CentrePointY, $Clockwise, $Radius, $ScalingFactor, $TextBrush) ;Draw the centre text _DrawGaugeOutline($backbuffer, $CentrePointX, $CentrePointY, $Radius, $VariableMaxValue, $VariableMinValue, $Thickness, $ScalingFactor, $Clockwise, $StartAngle, $SweepAngle, $hPen) ;Draw the gauge outline _DrawIndicators($backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $Clockwise, $ScalingFactor, $StartAngle, $SweepAngle, $hPen, True) ;Draw scale arc _DrawCheckMarks($backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $ScalingFactor, $VariableMaxValue, $NoOfCheckmarks, $CheckLength, $StartAngle, $SweepAngle, $hPen, True) ;Draw scale checkmarks If $VariableLimit Then _DrawRadialAllowedSpeed($backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $Clockwise, $ScalingFactor, $StartAngle, $SweepAngle, $AllowedLimit, $AllowedPen, True) ;Draw allowed speed limits EndIf _GDIPlus_PathDispose($Path) ;Tidy up _GDIPlus_BrushDispose($GaugeBrush) _GDIPlus_BrushDispose($TextBrush) _GDIPlus_PenDispose($hPen) _GDIPlus_PenDispose($AllowedPen) EndFunc ;==>_DrawRadialGauge ;Draw Variable Value (Text, Load/Speed Value) ;Creates The Centre Text of the Radial Gauge ;~ Func _DrawRadialGaugeText($ValueText, $CentrePointX, $CentrePointY, $Clockwise, $Radius, $ScalingFactor) Func _DrawRadialGaugeText(ByRef $backbuffer, $ValueText, $CentrePointX, $CentrePointY, $Clockwise, $Radius, $ScalingFactor, ByRef $TextBrush) Local $FontSize = 180 * $ScalingFactor ;Default font size (Scaled) Local $Text = _GDIPlus_PathCreate() Local $Format = _GDIPlus_StringFormatCreate() _GDIPlus_StringFormatSetAlign($Format, 2) ;Align right (Doesn't seem to make a difference) Local $Family = _GDIPlus_FontFamilyCreate("Agency FB") ;Centre text font Local $Font = _GDIPlus_FontCreate($Family, $FontSize, 2) Local $Layout = _GDIPlus_RectFCreate($CentrePointX - ($FontSize / 1.3) * $ScalingFactor, $CentrePointY - $FontSize * $ScalingFactor / 2) ;Set position (Top left) _GDIPlus_PathAddString($Text, Round($ValueText, 1), $Layout, $Family, 0, $FontSize * $ScalingFactor) ;Add value to path (To 1 decimal place) _GDIPlus_GraphicsFillPath($backbuffer, $Text, $TextBrush) $Layout = 0 ;Tidy up _GDIPlus_PathDispose($Text) _GDIPlus_FontDispose($Font) _GDIPlus_StringFormatDispose($Format) _GDIPlus_FontFamilyDispose($Family) EndFunc ;==>_DrawRadialGaugeText ;Draw Gauge Outline ;Creates the Outline of the Radial Gauge ;~ Func _DrawGaugeOutline($CentrePointX, $CentrePointY, $Radius, $Thickness, $ScalingFactor, $Clockwise, $StartAngle, $SweepAngle) Func _DrawGaugeOutline(ByRef $backbuffer, $CentrePointX, $CentrePointY, $Radius, $VariableMaxValue, $VariableMinValue, $Thickness, $ScalingFactor, $Clockwise, $StartAngle, $SweepAngle, ByRef $hPen) Local $Path = _GDIPlus_PathCreate() Local Const $PI = 3.141592653589793 $Radius += 2 ;Put the outline 2 px outside the gauge If $Clockwise Then ;If the gauge is to be filled clockwise _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle, $SweepAngle) _GDIPlus_GraphicsDrawLine($backbuffer, $CentrePointX + ($Radius * $ScalingFactor * Cos(($PI / 180) * ($StartAngle - $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue))))), $CentrePointY + ($Radius * $ScalingFactor * Sin(($PI / 180) * ($StartAngle - $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue))))), $CentrePointX + (($Radius - ($Thickness * $ScalingFactor) - (4 * $ScalingFactor)) * Cos(($PI / 180) * ($StartAngle - $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue)))) * $ScalingFactor), $CentrePointY + (($Radius - ($Thickness * $ScalingFactor) - 4) * $ScalingFactor * Sin(($PI / 180) * ($StartAngle - $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue))))), $hPen) $Radius -= ($Thickness * $ScalingFactor) ;Reduce radius for inner arc $Radius -= 4 _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), ($StartAngle + $SweepAngle), -$SweepAngle) Else _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle, -$SweepAngle) _GDIPlus_GraphicsDrawLine($backbuffer, $CentrePointX + ($Radius * $ScalingFactor * Cos(($PI / 180) * ($StartAngle + $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue))))), $CentrePointY + ($Radius * $ScalingFactor * Sin(($PI / 180) * ($StartAngle + $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue))))), $CentrePointX + (($Radius - ($Thickness * $ScalingFactor) - (4 * $ScalingFactor)) * Cos(($PI / 180) * ($StartAngle + $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue)))) * $ScalingFactor), $CentrePointY + (($Radius - ($Thickness * $ScalingFactor) - 4) * $ScalingFactor * Sin(($PI / 180) * ($StartAngle + $VariableMinValue * ($SweepAngle / ($VariableMaxValue - $VariableMinValue))))), $hPen) $Radius -= ($Thickness * $ScalingFactor) ;Reduce radius for inner arc $Radius -= 4 _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle - $SweepAngle, $SweepAngle) EndIf _GDIPlus_PathCloseFigure($Path) ;Close the path _GDIPlus_GraphicsDrawPath($backbuffer, $Path, $hPen) ;Draw the path _GDIPlus_PathDispose($Path) EndFunc ;==>_DrawGaugeOutline ;Draw Scale(s) ;Creates a number of indicative markings around the centre of the radial gauge ;~ Func _DrawIndicators($CentrePointX, $CentrePointY, $Radius, $Thickness, $Clockwise, $ScalingFactor, $StartAngle, $SweepAngle) Func _DrawIndicators(ByRef $backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $Clockwise, $ScalingFactor, $StartAngle, $SweepAngle, ByRef $hPen, $Inside) Local $Path = _GDIPlus_PathCreate() $Radius -= ($Thickness + 20) * $ScalingFactor If $Clockwise Then _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle, $SweepAngle) Else ;Doesn't make much difference, but it will be 180 degrees out _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle, -$SweepAngle) EndIf _GDIPlus_GraphicsDrawPath($backbuffer, $Path, $hPen) _GDIPlus_PathDispose($Path) EndFunc ;==>_DrawIndicators ;Draw the allowed speed marker Func _DrawRadialAllowedSpeed(ByRef $backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $Clockwise, $ScalingFactor, $StartAngle, $SweepAngle, _ $AllowedLimit, ByRef $AllowedPen, $Inside) Local $Path = _GDIPlus_PathCreate() $Radius -= ($Thickness + 24) * $ScalingFactor If $Clockwise Then ;Display in a clockwise direction _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle, $SweepAngle * $AllowedLimit / 100) ElseIf NOT $Clockwise Then ;Display in an anti-clockwise direction _GDIPlus_PathAddArc($Path, ($CentrePointX - ($Radius * $ScalingFactor)), ($CentrePointY - ($Radius * $ScalingFactor)), ($Radius * $ScalingFactor * 2), ($Radius * $ScalingFactor * 2), $StartAngle, -$SweepAngle * $AllowedLimit / 100) EndIf _GDIPlus_GraphicsDrawPath($backbuffer, $Path, $AllowedPen) ;Draw with the red pen ($AllowedPen) _GDIPlus_PathDispose($Path) EndFunc ;==>_DrawRadialAllowedSpeed ;DrawCheckmarks (Checkmarks) ;Creates the checkmarks and text around the indicator gauge ;~ Func _DrawCheckMarks($CentrePointX, $CentrePointY, $Radius, $Thickness, $ScalingFactor, $MaxValue, $NoOfCheckmarks, $CheckLength, $StartAngle, $SweepAngle, $hPen) Func _DrawCheckMarks(ByRef $backbuffer, $CentrePointX, $CentrePointY, $Radius, $Thickness, $ScalingFactor, $VariableMaxValue, $NoOfCheckmarks, $CheckLength, $StartAngle, _ $SweepAngle, ByRef $hPen, $Inside) Local Const $PI = 3.141592653589793 Local $TextBrush = _GDIPlus_BrushCreateSolid("0xFFFFFFFF") Local $aPoints[$NoOfCheckmarks][4] ;Creates an array of four points for each check line Local $aMarkText[$NoOfCheckmarks] ;Creates the text for the checkmarks $Radius -= ($Thickness + 20) * $ScalingFactor For $i = 0 to ($NoOfCheckmarks-1) $aMarkText[$i] = Round((($VariableMaxValue - $VariableMinValue) / ($NoOfCheckmarks - 1)) * $i) + $VariableMinValue ;Round checkmark values to one decimal place Next Local $aAngles[$NoOfCheckmarks] = [] ;Create an array to hold the angles at which the checkmarks should be If $Clockwise Then For $i = 0 to($NoOfCheckmarks - 1) $aAngles[$i] = $StartAngle + (($SweepAngle / ($NoOfCheckmarks - 1)) * $i) ;Spread out checkmarks evenly over the gauge Next Else ;For anticlockwise filling gauge For $i = 0 to($NoOfCheckmarks - 1) $aAngles[$i] = $StartAngle - (($SweepAngle / ($NoOfCheckmarks - 1)) * $i) ;Spread out checkmarks evenly over the gauge Next EndIf For $i = 0 to($NoOfCheckmarks - 1) $aAngles[$i] = $aAngles[$i] * $PI / 180 ;Convert degrees to radians $aPoints[$i][0] = $CentrePointX + ($Radius * Cos($aAngles[$i]) * $ScalingFactor) ;Create cartesian coordinates for the check lines from polar coordinates (Radius, angle) $aPoints[$i][1] = $CentrePointY + ($Radius * Sin($aAngles[$i]) * $ScalingFactor) $aPoints[$i][2] = $CentrePointX + (($Radius - ($CheckLength * $ScalingFactor)) * Cos($aAngles[$i]) * $ScalingFactor) $aPoints[$i][3] = $CentrePointY + (($Radius - ($CheckLength * $ScalingFactor)) * Sin($aAngles[$i]) * $ScalingFactor) Next ;Font data for checkmark text Local $Format = _GDIPlus_StringFormatCreate() Local $Family = _GDIPlus_FontFamilyCreate("Agency FB") Local $FontSize = 15 Local $Font = _GDIPlus_FontCreate($Family, $FontSize * $ScalingFactor, 2) For $i = 0 to($NoOfCheckmarks - 1) ;For each checkmark _GDIPlus_GraphicsDrawLine($backbuffer, $aPoints[$i][0], $aPoints[$i][1], $aPoints[$i][2], $aPoints[$i][3], $hPen) ;Draw the lines $Layout = _GDIPlus_RectFCreate($aPoints[$i][2] - ($FontSize * Cos($aAngles[$i])) - (18 * $ScalingFactor), $aPoints[$i][3] - ($FontSize * Sin($aAngles[$i]) + 10), 0, 0) _GDIPlus_GraphicsDrawStringEx($backbuffer, $aMarkText[$i], $Font, $Layout, $Format, $TextBrush) Next $Layout = 0 _GDIPlus_BrushDispose($TextBrush) _GDIPlus_FontDispose($Font) _GDIPlus_StringFormatDispose($Format) _GDIPlus_FontFamilyDispose($Family) EndFunc ;==>_DrawCheckMarks #EndRegion Draw Radial Gauge #EndRegion Functions  
    • By UEZ
      Here a little tool to display the histogram of an image (inspired by this thread):
      )

      ;#AutoIt3Wrapper_Icon=Histogram1.ico #AutoIt3Wrapper_Compile_Both=y ;#AutoIt3Wrapper_Res_Field=CompanyName|UEZ Software Development ;#AutoIt3Wrapper_Res_Field=ProductName|GDI+ Show Histogram ;#AutoIt3Wrapper_Res_Field=ProductVersion|%AutoItVer% #AutoIt3Wrapper_Res_Fileversion=0.9.8.0 ;#AutoIt3Wrapper_Res_Field=Build|2015-07-10 #AutoIt3Wrapper_Res_LegalCopyright=UEZ Software Development #AutoIt3Wrapper_Res_Language=1033 ;#AutoIt3Wrapper_Res_Field=URL|http://www.autoitscript.com/forum/index.php?showtopic=147777 #AutoIt3Wrapper_Run_Au3Stripper=y #Au3Stripper_Parameters=/so /pe /rm #AutoIt3Wrapper_Run_After=del /f /q "%scriptdir%\%scriptfile%_stripped.au3" #AutoIt3Wrapper_UseUpx=y #AutoIt3Wrapper_UPX_Parameters=--best --lzma #AutoIt3Wrapper_Run_After=upx.exe --best --lzma "GDI+ Show Histogram_x64.exe" #AutoIt3Wrapper_UseX64=n #include <Constants.au3> #include <GUIConstantsEx.au3> #include <GDIPlus.au3> #include <WindowsConstants.au3> Opt("MustDeclareVars", 1) Opt("MouseCoordMode", 2) _GDIPlus_Startup() If @error Then Exit MsgBox(0x40010, "Error", "GDI+ Show Histogram can run on operating systems Vista or newer only!") Global $ghGDIPDll = $__g_hGDIPDll, $aRes Global Const $hFullScreen = WinGetHandle("[TITLE:Program Manager;CLASS:Progman]") Global Const $aFullScreen = WinGetPos($hFullScreen) Global Enum $HistogramFormatARGB, $HistogramFormatPARGB, $HistogramFormatRGB, $HistogramFormatGray, _ ;http://msdn.microsoft.com/en-us/library/windows/desktop/ms534129(v=vs.85).aspx $HistogramFormatB, $HistogramFormatG, $HistogramFormatR, $HistogramFormatA Global $tStructChannel0 = DllStructCreate("uint channel0[256]") Global $pStructChannel0 = DllStructGetPtr($tStructChannel0) Global $tStructChannel1 = DllStructCreate("uint channel1[256]") Global $pStructChannel1 = DllStructGetPtr($tStructChannel1) Global $tStructChannel2 = DllStructCreate("uint channel2[256]") Global $pStructChannel2 = DllStructGetPtr($tStructChannel2) Global $tStructChannel3 = DllStructCreate("uint channel3[256]") Global $pStructChannel3 = DllStructGetPtr($tStructChannel3) Global $s, $sFile, $hImage, $bImgLoaded = False, $aLuminosity[257], $aCRGB[257] Global Const $STM_SETIMAGE = 0x0172, $iLineJoinBevel = 1, $frY = 0.299, $fgY = 0.587, $fbY = 0.114 Global Const $hGUI = GUICreate("GDI+ Show Histogram v0.98 beta by UEZ build 2015-07-13", 468, 310, -1, -1, Default, Default) GUISetBkColor(0xFFFFFF, $hGUI) Global Const $sLabel_Titel_Txt = "GDI+ Show Histogram" Global Const $iPosX_Label = 20, $iPosY_Label = 12 Global Const $iLabel_Titel_Shadow = GUICtrlCreateLabel($sLabel_Titel_Txt, $iPosX_Label, $iPosY_Label, 429, 57) GUICtrlSetFont(-1, 30, 400, 0, "Comic Sans MS", 4) GUICtrlSetColor(-1, 0xC0C0D8) Global Const $iLabel_Titel = GUICtrlCreateLabel($sLabel_Titel_Txt, $iPosX_Label - 4, $iPosY_Label - 4, 429, 57) GUICtrlSetFont(-1, 30, 400, 0, "Comic Sans MS", 4) GUICtrlSetColor(-1, 0x0000C0) GUICtrlSetBkColor(-1, -2) Global Const $iPic_Histogram = GUICtrlCreatePic("", 20, 90, 255, 127, -1, $WS_EX_STATICEDGE) GUICtrlSetCursor(-1, 14) Global Const $iPic_ColorGradient = GUICtrlCreatePic("", 20, 220, 255, 24, -1, $WS_EX_STATICEDGE) Global Const $iGroup = GUICtrlCreateGroup("Channel", 290, 84, 160, 164) Global Const $iRadio_L = GUICtrlCreateRadio("Luminosit&y (gray)", 300, 100, 110, 20) GUICtrlSetTip(-1, $frY & "*R, " & $fgY & "*G, " & $fbY & "*B") GUICtrlSetState($iRadio_L, $GUI_CHECKED) Global Const $iRadio_C = GUICtrlCreateRadio("&cRGB", 300, 130, 60, 20) GUICtrlSetTip(-1, "Combined average of RGB values") Global Const $iRadio_R = GUICtrlCreateRadio("&Red", 300, 160, 60, 20) Global Const $iRadio_G = GUICtrlCreateRadio("&Green", 300, 190, 60, 20) Global Const $iRadio_B = GUICtrlCreateRadio("&Blue", 300, 220, 60, 20) GUICtrlCreateGroup("", -99, -99, 1, 1) Global Const $iButton_Save = GUICtrlCreateButton("&Save", 209, 265, 70, 30) GUICtrlSetTip(-1, "Click button to save all histogram images") GUICtrlSetState(-1, $GUI_DISABLE) Global Const $iButton_Load = GUICtrlCreateButton("&Load", 290, 265, 70, 30) GUICtrlSetTip(-1, "Click button to load an image") Global Const $iButton_Exit = GUICtrlCreateButton("E&xit", 390, 265, 60, 30) Global $sLabelCredit_Txt = "coded by UEZ'13" Global $aLabelCredit_Pos[StringLen($sLabelCredit_Txt)][4], $u, $iFS = 6.5, $iY = 280 For $u = 0 To UBound($aLabelCredit_Pos) - 1 $aLabelCredit_Pos[$u][0] = StringMid($sLabelCredit_Txt, $u + 1, 1) $aLabelCredit_Pos[$u][1] = 20 + $u * ($iFS - 0.25) $aLabelCredit_Pos[$u][2] = $iY $aLabelCredit_Pos[$u][3] = GUICtrlCreateLabel($aLabelCredit_Pos[$u][0], $aLabelCredit_Pos[$u][1], $aLabelCredit_Pos[$u][2], $iFS, $iFS * 1.8) GUICtrlSetFont(-1, $iFS, 400, 0, "Comic Sans MS", 2) GUICtrlSetColor(-1, 0x006000) Next Global $aLabelCredit_AnimPos[300] For $u = 0 To UBound($aLabelCredit_AnimPos) - 1 $aLabelCredit_AnimPos[$u] = $iY Next Global Const $fLimes = 2.2, $fStep = 0.1 Global $iPT = 0, $z = Int((UBound($aLabelCredit_AnimPos) - ($fLimes * $fStep * 100)) / 2) For $u = 0 To $fLimes Step $fStep $aLabelCredit_AnimPos[$z] = $iY + Sin($iPT * 4) * 10 $z += 1 $iPT += 0.075 Next Global $ihGui_PreviewSize = 256, $iBGColor = 0xF0F0F0 Global $hGui_Preview = GUICreate("", $ihGui_PreviewSize, $ihGui_PreviewSize + 58, -1, -1, $WS_POPUP + $WS_BORDER, $WS_EX_TOPMOST, $hGUI) Global $iPic_Preview = GUICtrlCreatePic("", 0, 0, $ihGui_PreviewSize, $ihGui_PreviewSize) Global $idLabel_Info = GUICtrlCreateLabel("", 0, $ihGui_PreviewSize, $ihGui_PreviewSize * 2, 58) GUICtrlSetFont(-1, 8.5, 400, 0, "Arial", 5) GUICtrlSetColor(-1, $iBGColor) GUICtrlSetBkColor(-1, 0x333333) Global Const $hTexture_Checkerboard = _GDIPlus_CreateCheckerboardTexture(8, 0xFFFBFBFB, 0xFFFFFFFF) Global $hHBmp_L = _GDIPlus_CreateColorGradient("L", 256, 24) Global $hHBmp_C = _GDIPlus_CreateColorGradient("C", 256, 24) Global $hHBmp_R = _GDIPlus_CreateColorGradient("R", 256, 24) Global $hHBmp_G = _GDIPlus_CreateColorGradient("G", 256, 24) Global $hHBmp_B = _GDIPlus_CreateColorGradient("B", 256, 24) Global Const $hHBmp_HL = _GDIPlus_BitmapCreateFromScan0(256, 127) Global Const $hCtxt_HL = _GDIPlus_ImageGetGraphicsContext($hHBmp_HL) Global Const $hHBmp_HC = _GDIPlus_BitmapCloneArea($hHBmp_HL, 0, 0, 256, 127, 0x0026200A) Global Const $hCtxt_HC = _GDIPlus_ImageGetGraphicsContext($hHBmp_HC) Global Const $hHBmp_HR = _GDIPlus_BitmapCloneArea($hHBmp_HL, 0, 0, 256, 127, 0x0026200A) Global Const $hCtxt_HR = _GDIPlus_ImageGetGraphicsContext($hHBmp_HR) Global Const $hHBmp_HG = _GDIPlus_BitmapCloneArea($hHBmp_HL, 0, 0, 256, 127, 0x0026200A) Global Const $hCtxt_HG = _GDIPlus_ImageGetGraphicsContext($hHBmp_HG) Global Const $hHBmp_HB = _GDIPlus_BitmapCloneArea($hHBmp_HL, 0, 0, 256, 127, 0x0026200A) Global Const $hCtxt_HB = _GDIPlus_ImageGetGraphicsContext($hHBmp_HB) _GDIPlus_GraphicsClear($hCtxt_HL, 0xFFFFFFFF) _hBmpToPicControl($iPic_ColorGradient, $hHBmp_L) Global $hB_H = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hHBmp_HL) _hBmpToPicControl($iPic_Histogram, $hB_H, 1) GUISetState(@SW_HIDE, $hGui_Preview) GUISetState(@SW_SHOW, $hGUI) ControlFocus($hGUI, "", $iButton_Load) Global $hPen_H = _GDIPlus_PenCreate() $s = "L" Global $iDummyL = GUICtrlCreateDummy(), $iDummyC = GUICtrlCreateDummy(), $iDummyR = GUICtrlCreateDummy(), $iDummyG = GUICtrlCreateDummy(), $iDummyB = GUICtrlCreateDummy() Global $iHistogramFormat, $hHBmp_Preview, $aPosCtrl, $aPosWin, $aMouseInfo, $aPos_hWnd, $imp, $iVal, $iMpos_oldx, $iMpos_oldy, $sType, $iPaletteType, $iPixelFormat Global $fAverage_L, $fAverage_cRGB, $iAverage_R, $iAverage_B, $iAverage_G, $o = 0 Global $bShow = False, $bHide = False, $bIsAlpha = False, $bIsGray = False Global Const $iEntries = 256 Global Const $tagCOLORPALETTE = "uint Flags;" & _ ; Palette flags "uint Count;" & _ ; Number of color entries "uint ARGB[" & $iEntries & "];" ; Palette color AdlibRegister("AnimateLabel", 60) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE, $iButton_Exit AdlibUnRegister("AnimateLabel") GUIDelete($hGui_Preview) GUIDelete($hGUI) _WinAPI_DeleteObject($hHBmp_L) _WinAPI_DeleteObject($hHBmp_C) _WinAPI_DeleteObject($hHBmp_L) _WinAPI_DeleteObject($hHBmp_R) _WinAPI_DeleteObject($hHBmp_G) _WinAPI_DeleteObject($hHBmp_B) If $hHBmp_Preview Then _WinAPI_DeleteObject($hHBmp_Preview) _GDIPlus_PenDispose($hPen_H) _GDIPlus_BrushDispose($hTexture_Checkerboard) _GDIPlus_GraphicsDispose($hCtxt_HL) _GDIPlus_GraphicsDispose($hCtxt_HC) _GDIPlus_GraphicsDispose($hCtxt_HR) _GDIPlus_GraphicsDispose($hCtxt_HG) _GDIPlus_GraphicsDispose($hCtxt_HB) _GDIPlus_BitmapDispose($hHBmp_HL) _GDIPlus_BitmapDispose($hHBmp_HC) _GDIPlus_BitmapDispose($hHBmp_HR) _GDIPlus_BitmapDispose($hHBmp_HG) _GDIPlus_BitmapDispose($hHBmp_HB) _GDIPlus_Shutdown() $tStructChannel0 = 0 $tStructChannel1 = 0 $tStructChannel2 = 0 $tStructChannel3 = 0 Exit Case $iRadio_L, $iDummyL If $s <> "L" Then _hBmpToPicControl($iPic_ColorGradient, $hHBmp_L) If $bImgLoaded Then $hB_H = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hHBmp_HL) _hBmpToPicControl($iPic_Histogram, $hB_H, 1) EndIf $s = "L" EndIf Case $iRadio_C, $iDummyC If $s <> "C" Then _hBmpToPicControl($iPic_ColorGradient, $hHBmp_C) If $bImgLoaded Then $hB_H = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hHBmp_HC) _hBmpToPicControl($iPic_Histogram, $hB_H, 1) EndIf $s = "C" EndIf Case $iRadio_R, $iDummyR If $s <> "R" Then _hBmpToPicControl($iPic_ColorGradient, $hHBmp_R) If $bImgLoaded Then $hB_H = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hHBmp_HR) _hBmpToPicControl($iPic_Histogram, $hB_H, 1) EndIf $s = "R" EndIf Case $iRadio_G, $iDummyG If $s <> "G" Then _hBmpToPicControl($iPic_ColorGradient, $hHBmp_G) If $bImgLoaded Then $hB_H = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hHBmp_HG) _hBmpToPicControl($iPic_Histogram, $hB_H, 1) EndIf $s = "G" EndIf Case $iRadio_B, $iDummyB If $s <> "B" Then _hBmpToPicControl($iPic_ColorGradient, $hHBmp_B) If $bImgLoaded Then $hB_H = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hHBmp_HB) _hBmpToPicControl($iPic_Histogram, $hB_H, 1) EndIf $s = "B" EndIf Case $iButton_Load $sFile = FileOpenDialog("Select an image", "", "Images (*.jpg;*.png;*.bmp;*.gif)", 3) If @error Then ContinueCase If $bImgLoaded Then _GDIPlus_ImageDispose($hImage) $hImage = _GDIPlus_ImageLoadFromFile($sFile) If @error Then MsgBox(0x40010, "Error", "Unable to load image", 30) ContinueCase EndIf GUICtrlSetState($iButton_Save, $GUI_ENABLE) $aRes = _GDIPlus_ImageGetFlags($hImage) If BitAND($aRes[0], $GDIP_IMAGEFLAGS_HASALPHA) Then $bIsAlpha = True Else $bIsAlpha = False EndIf If BitAND($aRes[0], $GDIP_IMAGEFLAGS_COLORSPACE_GRAY) Then $bIsGray = True Else $bIsGray = False EndIf $hHBmp_Preview = _GetImage($sFile, $ihGui_PreviewSize, $iBGColor) _hBmpToPicControl($iPic_Preview, $hHBmp_Preview, 1) If Not $bIsAlpha Then $pStructChannel3 = 0 $iHistogramFormat = $HistogramFormatRGB Else $pStructChannel3 = DllStructGetPtr($tStructChannel3) $iHistogramFormat = $HistogramFormatARGB EndIf _GDIPlus_BitmapGetHistogram($hImage, $iHistogramFormat, _GDIPlus_BitmapGetHistogramSize($iHistogramFormat), $pStructChannel0, $pStructChannel1, $pStructChannel2, $pStructChannel3) _GDIPlus_CreateHistogram() $bImgLoaded = True If BitAND(GUICtrlRead($iRadio_L), $GUI_CHECKED) Then $s = "" GUICtrlSendToDummy($iDummyL) ElseIf BitAND(GUICtrlRead($iRadio_C), $GUI_CHECKED) Then $s = "" GUICtrlSendToDummy($iDummyC) ElseIf BitAND(GUICtrlRead($iRadio_R), $GUI_CHECKED) Then $s = "" GUICtrlSendToDummy($iDummyR) ElseIf BitAND(GUICtrlRead($iRadio_G), $GUI_CHECKED) Then $s = "" GUICtrlSendToDummy($iDummyG) Else $s = "" GUICtrlSendToDummy($iDummyB) EndIf Case $iButton_Save If $sFile = "" Then ContinueLoop $sType = "png" $o += _GDIPlus_ImageSaveToFile($hHBmp_HL, StringRegExpReplace($sFile, "(.*)\..*", "$1") & "_Luminosity." & $sType) $o += _GDIPlus_ImageSaveToFile($hHBmp_HC, StringRegExpReplace($sFile, "(.*)\..*", "$1") & "_cRGB." & $sType) $o += _GDIPlus_ImageSaveToFile($hHBmp_HR, StringRegExpReplace($sFile, "(.*)\..*", "$1") & "_Red." & $sType) $o += _GDIPlus_ImageSaveToFile($hHBmp_HG, StringRegExpReplace($sFile, "(.*)\..*", "$1") & "_Green." & $sType) $o += _GDIPlus_ImageSaveToFile($hHBmp_HB, StringRegExpReplace($sFile, "(.*)\..*", "$1") & "_Blue." & $sType) If $o = 5 Then MsgBox(64 + 262144, "Information", "Images properly saved to " & StringRegExpReplace($sFile, "(.*)\\.*", "$1"), 30, $hGUI) Else MsgBox(16 + 262144, "Error", "One or more images could not saved to " & StringRegExpReplace($sFile, "(.*)\\.*", "$1") & ".", 30, $hGUI) EndIf EndSwitch If WinActive($hGUI) Then $aMouseInfo = GUIGetCursorInfo($hGUI) Switch $aMouseInfo[4] Case $iPic_Histogram If $bImgLoaded Then $aPos_hWnd = WinGetPos($hGUI) $imp = Max(1, Min(256, -19 + $aMouseInfo[0])) Switch $s Case "L" $iVal = $aLuminosity[$imp] Case "C" $iVal = $aCRGB[$imp] Case "R" $iVal = DllStructGetData($tStructChannel0, "channel0", $imp) Case "G" $iVal = DllStructGetData($tStructChannel1, "channel1", $imp) Case "B" $iVal = DllStructGetData($tStructChannel2, "channel2", $imp) EndSwitch If $iMpos_oldx <> $aMouseInfo[0] Or $iMpos_oldy <> $aMouseInfo[1] Then ToolTip("Index: " & $imp & ", Value: " & Round($iVal, 0) & ", Average: " & Round($fAverage_L, 2), $aPos_hWnd[0] + $aMouseInfo[0] - 60, $aMouseInfo[1] + $aPos_hWnd[1] - 20) $iMpos_oldx = $aMouseInfo[0] $iMpos_oldy = $aMouseInfo[1] EndIf ShowPreview($iPic_Histogram) $bShow = True $bHide = False EndIf Case Else If Not $bHide Then GUISetState(@SW_HIDE, $hGui_Preview) $bHide = True ToolTip("") EndIf $bShow = False EndSwitch EndIf WEnd Func AnimateLabel() Local Static $v = Int((UBound($aLabelCredit_AnimPos) - ($fLimes * $fStep * 100)) / 2) Local $u For $u = 0 To UBound($aLabelCredit_Pos) - 1 GUICtrlSetPos($aLabelCredit_Pos[$u][3], $aLabelCredit_Pos[$u][1], $aLabelCredit_AnimPos[$v - $u]) Next If $v - $u < 0 Then $v = UBound($aLabelCredit_AnimPos) - 1 $v -= 1 EndFunc ;==>AnimateLabel Func Min($a, $b) If $a < $b Then Return $a Return $b EndFunc ;==>Min Func Max($a, $b) If $a > $b Then Return $a Return $b EndFunc ;==>Max Func ShowPreview($iCtrl) $aPosWin = WinGetPos($hGUI) $aPosCtrl = ControlGetPos($hGUI, "", $iCtrl) Local $iNewX, $iNewX1 = $aPosWin[0] - $ihGui_PreviewSize + 10, $iNewX2 = $aPosWin[0] + $aPosWin[2] - 10 $iNewX = $iNewX1 If $iNewX1 < $aFullScreen[0] Then $iNewX = $iNewX2 EndIf WinMove($hGui_Preview, "", $iNewX, $aPosWin[1] + 50) GUISetState(@SW_SHOWNOACTIVATE, $hGui_Preview) EndFunc ;==>ShowPreview Func _GetImage($sFile, $iWH, $iBkClr = 0xFFFFFF, $bCheckerboard_Bg = True) Local $hBmp1, $hBitmap, $hGraphic, $hImage, $iW, $iH, $aGS, $hBmp2, $aFTS $aFTS = FileGetTime($sFile) If @error Then Return SetError(1, 0, 0) $hBmp1 = _WinAPI_CreateBitmap($iWH, $iWH, 1, 32) $hBitmap = _GDIPlus_BitmapCreateFromHBITMAP($hBmp1) $hGraphic = _GDIPlus_ImageGetGraphicsContext($hBitmap) _WinAPI_DeleteObject($hBmp1) $hImage = _GDIPlus_ImageLoadFromFile($sFile) $iW = _GDIPlus_ImageGetWidth($hImage) $iH = _GDIPlus_ImageGetHeight($hImage) GUICtrlSetData($idLabel_Info, StringRegExpReplace($sFile, ".*\\(.*)", "$1") & @LF & Round(FileGetSize($sFile) / 1024, 0) & " kb (" & $iW & " x " & $iH & ")" & @LF & $aFTS[0] & "/" & $aFTS[1] & "/" & $aFTS[2] & " " & $aFTS[3] & ":" & $aFTS[4] & ":" & $aFTS[5] & @LF & "Alpha: " & $bIsAlpha & ", Gray: " & $bIsGray) $aGS = _GetScale($iW, $iH, $iWH) Switch $bCheckerboard_Bg Case True ;~ _GDIPlus_GraphicsFillRect($hGraphic, 0, 0, $iWH, $iWH, $hTexture_Checkerboard) _GDIPlus_GraphicsClear($hGraphic, BitOR(0xFF000000, $iBkClr)) _GDIPlus_GraphicsFillRect($hGraphic, $aGS[0], $aGS[1], $aGS[2], $aGS[3], $hTexture_Checkerboard) Case False _GDIPlus_GraphicsClear($hGraphic, BitOR(0xFF000000, $iBkClr)) EndSwitch _GDIPlus_GraphicsDrawImageRect($hGraphic, $hImage, $aGS[0], $aGS[1], $aGS[2], $aGS[3]) _GDIPlus_ImageDispose($hImage) _GDIPlus_GraphicsDispose($hGraphic) $hBmp2 = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap) _GDIPlus_BitmapDispose($hBitmap) Return $hBmp2 EndFunc ;==>_GetImage Func _GetScale($iW, $iH, $iWH) Local $aRet[4] If $iW <= $iWH And $iH <= $iWH Then $aRet[2] = $iW $aRet[3] = $iH $aRet[0] = ($iWH - $aRet[2]) / 2 $aRet[1] = ($iWH - $aRet[3]) / 2 ElseIf $iW > $iH Then $aRet[2] = $iWH $aRet[3] = $iH / ($iW / $iWH) $aRet[0] = 0 $aRet[1] = ($iWH - $aRet[3]) / 2 ElseIf $iW < $iH Then $aRet[2] = $iW / ($iH / $iWH) $aRet[3] = $iWH $aRet[0] = ($iWH - $aRet[2]) / 2 $aRet[1] = 0 ElseIf $iW = $iH Then $aRet[2] = $iWH $aRet[3] = $iWH $aRet[0] = 0 $aRet[1] = 0 EndIf Return $aRet EndFunc ;==>_GetScale Func _hBmpToPicControl($iCID, ByRef $hBmp, $iFlag = 0) Local $hOldBmp $hOldBmp = GUICtrlSendMsg($iCID, $STM_SETIMAGE, $IMAGE_BITMAP, $hBmp) If $hOldBmp Then _WinAPI_DeleteObject($hOldBmp) If $iFlag Then _WinAPI_DeleteObject($hBmp) EndFunc ;==>_hBmpToPicControl Func _GDIPlus_CreateHistogram($sRounding = "Ceiling") Local $iMaxL, $iMaxC, $iMaxR, $iMaxG, $iMaxB, $a, $r, $g, $b, $yR, $yG, $yB, $iRedAv, $iGreenAv, $iBlueAv For $i = 1 + $bIsAlpha To 256 If $bIsAlpha Then ;~ ConsoleWrite("Alpha: " & DllStructGetData($tStructChannel0, "channel0", $i) & @CRLF) $r = DllStructGetData($tStructChannel1, "channel1", $i) $yR = $r * $frY If DllStructGetData($tStructChannel1 , "channel1", $i) > $iMaxR Then $iMaxR = $r $g = DllStructGetData($tStructChannel2, "channel2", $i) $yG = $g * $fgY If DllStructGetData($tStructChannel2 , "channel2", $i) > $iMaxG Then $iMaxG = $g $b = DllStructGetData($tStructChannel3, "channel3", $i) $yB = $b * $fbY If DllStructGetData($tStructChannel3 , "channel3", $i) > $iMaxB Then $iMaxB = $b $fAverage_cRGB += $r + $g + $b $fAverage_L += $yR + $yG + $yB Else $r = DllStructGetData($tStructChannel0, "channel0", $i) $yR = $r * $frY If DllStructGetData($tStructChannel0 , "channel0", $i) > $iMaxR Then $iMaxR = $r $g = DllStructGetData($tStructChannel1, "channel1", $i) $yG = $g * $fgY If DllStructGetData($tStructChannel1 , "channel1", $i) > $iMaxG Then $iMaxG = $g $b = DllStructGetData($tStructChannel2, "channel2", $i) $yB = $b * $fbY If DllStructGetData($tStructChannel2 , "channel2", $i) > $iMaxB Then $iMaxB = $b EndIf $fAverage_cRGB += $r + $g + $b $fAverage_L += $yR + $yG + $yB $aLuminosity[$i] = $yR + $yG + $yB If $aLuminosity[$i] > $iMaxL Then $iMaxL = $aLuminosity[$i] $aCRGB[$i] = ($r + $g + $b) / 3 If $aCRGB[$i] > $iMaxC Then $iMaxC = $aCRGB[$i] Next $fAverage_cRGB /= 256 * 3 $fAverage_L /= 256 _GDIPlus_GraphicsClear($hCtxt_HL, 0xFFFFFFFF) _GDIPlus_GraphicsClear($hCtxt_HC, 0xFFFFFFFF) _GDIPlus_GraphicsClear($hCtxt_HR, 0xFFFFFFFF) _GDIPlus_GraphicsClear($hCtxt_HG, 0xFFFFFFFF) _GDIPlus_GraphicsClear($hCtxt_HB, 0xFFFFFFFF) Local $iDL = 1, $iDC = 1, $iDR = 1, $iDG = 1, $iDB = 1 Local $sRoundings = "Round,Ceiling,Floor," If Not StringInStr($sRoundings, $sRounding) Then $sRounding = "Ceiling" If $iMaxL > 128 Then ;~ $iDL = Ceiling($iMaxL / 128) $iDL = Execute($sRounding & "(" & $iMaxL / 128 & ")") Else $iDL = 1 / (128 / $iMaxL) EndIf If $iMaxC > 128 Then ;~ $iDC = Ceiling($iMaxC / 128) $iDC = Execute($sRounding & "(" & $iMaxC / 128 & ")") Else $iDC = 1 / (128 / $iMaxC) EndIf If $iMaxR > 128 Then ;~ $iDR = Ceiling($iMaxR / 128) $iDR = Execute($sRounding & "(" & $iMaxR / 128 & ")") Else $iDR = 1 / (128 / $iMaxR) EndIf If $iMaxG > 128 Then ;~ $iDG = Ceiling($iMaxG / 128) $iDG = Execute($sRounding & "(" & $iMaxG / 128 & ")") Else $iDG = 1 / (128 / $iMaxG) EndIf If $iMaxB > 128 Then ;~ $iDB = Ceiling($iMaxB / 128) $iDB = Execute($sRounding & "(" & $iMaxB / 128 & ")") Else $iDB = 1 / (128 / $iMaxB) EndIf For $i = 1 To 256 _GDIPlus_PenSetColor($hPen_H, 0xFF000000) _GDIPlus_GraphicsDrawLine($hCtxt_HL, $i - 1, 127, $i - 1, 127 - (Int($aLuminosity[$i] / $iDL)), $hPen_H) _GDIPlus_PenSetColor($hPen_H, 0xFF000000) _GDIPlus_GraphicsDrawLine($hCtxt_HC, $i - 1, 127, $i - 1, 127 - (Int($aCRGB[$i] / $iDC)), $hPen_H) _GDIPlus_PenSetColor($hPen_H, 0xFFB00000) If $bIsAlpha Then _GDIPlus_GraphicsDrawLine($hCtxt_HR, $i - 1, 127, $i - 1, 127 - (Int(DllStructGetData($tStructChannel1, "channel1", $i) / $iDR)), $hPen_H) _GDIPlus_PenSetColor($hPen_H, 0xFF00B000) _GDIPlus_GraphicsDrawLine($hCtxt_HG, $i - 1, 127, $i - 1, 127 - (Int(DllStructGetData($tStructChannel2, "channel2", $i) / $iDG)), $hPen_H) _GDIPlus_PenSetColor($hPen_H, 0xFF0000B0) _GDIPlus_GraphicsDrawLine($hCtxt_HB, $i - 1, 127, $i - 1, 127 - (Int(DllStructGetData($tStructChannel3, "channel3", $i) / $iDB)), $hPen_H) Else _GDIPlus_GraphicsDrawLine($hCtxt_HR, $i - 1, 127, $i - 1, 127 - (Int(DllStructGetData($tStructChannel0, "channel0", $i) / $iDR)), $hPen_H) _GDIPlus_PenSetColor($hPen_H, 0xFF00B000) _GDIPlus_GraphicsDrawLine($hCtxt_HG, $i - 1, 127, $i - 1, 127 - (Int(DllStructGetData($tStructChannel1, "channel1", $i) / $iDG)), $hPen_H) _GDIPlus_PenSetColor($hPen_H, 0xFF0000B0) _GDIPlus_GraphicsDrawLine($hCtxt_HB, $i - 1, 127, $i - 1, 127 - (Int(DllStructGetData($tStructChannel2, "channel2", $i) / $iDB)), $hPen_H) EndIf Next EndFunc ;==>_GDIPlus_CreateHistogram Func _GDIPlus_CreateColorGradient($sColorChannel, $iW, $iH, $bHBitmap = True) Local $hBitmap = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Local $hCtxt = _GDIPlus_ImageGetGraphicsContext($hBitmap) ;~ _GDIPlus_GraphicsSetSmoothingMode($hCtxt, 2) Local $hPen = _GDIPlus_PenCreate() _GDIPlus_PenSetLineJoin($hPen, $iLineJoinBevel) Local $i, $c For $i = 0 To $iW $c = Hex($i, 2) Switch $sColorChannel Case "L" _GDIPlus_PenSetColor($hPen, "0xFF" & $c & $c & $c) Case "C" _GDIPlus_PenSetColor($hPen, "0xFF" & $c & $c & $c) Case "R" _GDIPlus_PenSetColor($hPen, "0xFF" & $c & "0000") Case "G" _GDIPlus_PenSetColor($hPen, "0xFF00" & $c & "00") Case "B" _GDIPlus_PenSetColor($hPen, "0xFF0000" & $c) EndSwitch _GDIPlus_GraphicsDrawLine($hCtxt, $i, 0, $i, $iH, $hPen) Next _GDIPlus_GraphicsDispose($hCtxt) _GDIPlus_PenDispose($hPen) If $bHBitmap Then Local $hHBmp = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap) _GDIPlus_BitmapDispose($hBitmap) Return $hHBmp EndIf Return $hBitmap EndFunc ;==>_GDIPlus_CreateColorGradient Func _GDIPlus_CreateCheckerboardTexture($iSquareSize = 80, $iCol1 = 0xFFECECEC, $iCol2 = 0xFFDFDFDF) Local $hPatternBitmap = _GDIPlus_BitmapCreateFromScan0(2 * $iSquareSize, 2 * $iSquareSize) Local $hCtxt = _GDIPlus_ImageGetGraphicsContext($hPatternBitmap) Local $hBrush0 = _GDIPlus_BrushCreateSolid($iCol1) Local $hBrush1 = _GDIPlus_BrushCreateSolid($iCol2) _GDIPlus_GraphicsFillRect($hCtxt, 0, 0, $iSquareSize, $iSquareSize, $hBrush0) _GDIPlus_GraphicsFillRect($hCtxt, $iSquareSize, 0, $iSquareSize, $iSquareSize, $hBrush1) _GDIPlus_GraphicsFillRect($hCtxt, 0, $iSquareSize, $iSquareSize, $iSquareSize, $hBrush1) _GDIPlus_GraphicsFillRect($hCtxt, $iSquareSize, $iSquareSize, $iSquareSize, $iSquareSize, $hBrush0) Local $hTexture = _GDIPlus_TextureCreate($hPatternBitmap) _GDIPlus_GraphicsDispose($hCtxt) _GDIPlus_BitmapDispose($hPatternBitmap) _GDIPlus_BitmapDispose($hBrush0) _GDIPlus_BitmapDispose($hBrush1) Return $hTexture EndFunc ;==>_CreatePatternTexture  
      GdipBitmapGetHistogram(), GdipBitmapGetHistogramSize() and 2 more GDI+ functions requires GDI+ v1.1 which means this will only run on Vista or higher operating systems.
      I hope the values are correct especially the value for luminosity.
      Br,
      UEZ
×
×
  • Create New...