AutoIT Wrapper error

[Jos]

26 minutes ago, careca said:

Remember i had the exact same error a while back? we even discussed it in PM.

My guess is everything is going to be fine in the files, as mines were.

 

Yes I remember, but we didn't get to the root cause and you removed all files, also the User stuff and reinstalled to get it fixed .....right?

I would like to understand why it is going wrong by digging deeper until we find the real reason, so we can learn from it.

Jos

[DigDeep]

In the AutoIe3Wrapper.au3, Line 14 says #AutoIt3Wrapper_Res_ProductVersion=2.2.

[careca]

Yes i reverted to make it usable again, but if there's anything else i can do to try find the cause, just let me know. At the time you even mentioned remote access, i would be good with that.

[DigDeep]

In the AutoIt3Wrapper.au3, Line 14 says: #AutoIt3Wrapper_Res_ProductVersion=2.2. Are we looking at the correct line?

[Jos]

29 minutes ago, Jos said:

Ok, this is correct. Scroll down to line 14: #include "WinAPIFiles.au3" and do again Alt+I, this should open "WinAPIFiles.au3". Check if it is in the proper directory and whether it contains the Func _WinAPI_GetTempFileName() on line 1321.

Jos

This is in the Win.api include file.

 

Edited August 6, 2018 by Jos

[Jos]

25 minutes ago, careca said:

Yes i reverted to make it usable again, but if there's anything else i can do to try find the cause, just let me know. At the time you even mentioned remote access, i would be good with that.

So you can still replicate the issue in your setup?
It should be relatively easy to debug as you have all sourcecode and it simply complains about a UDF not found.
We probably can also add an #include<WinApiFiles.au3> to AutoIt3Wrapper.au3, but it doesn't make sense as it is included via  WinApi.au3.

Jos

[DigDeep]

Ok, it is at Line 42 in the AutoIt3Wrapper.au3 > #include <WinAPI.au3>.

I did Alt+I and it opened the WinAPi.au3

[Jos]

So now please do the steps I described last from the WinApi.au3!

Jos

 

[DigDeep]

1 minute ago, Jos said:

So now please do the steps I described last from the WinApi.au3!

Jos

 

are you talking about this step?

Ok, this is correct. Scroll down to line 14: #include "WinAPIFiles.au3" and do again Alt+I, this should open "WinAPIFiles.au3". Check if it is in the proper directory and whether it contains the Func _WinAPI_GetTempFileName() on line 1321.

[Jos]

yes

[careca]

I confirm that once i install SciTE4AutoIt3 v18.708.1148.0 i get those 2 errors the OP mentioned, even if the au3 file/script is completely empty without a single line, once i try to run i get the "Line 1368 _winapi-gettempfilename" etc, and right after that the variable without being declared, SciTe_RestoreSession($ScriptFile_In). Once i install back SciTE4AutoIt3 v17.224.935.0 it's all good.

The two outputs:

Spoiler

>"C:\Program Files (x86)\AutoIt3\SciTE\..\AutoIt3.exe" "C:\Program Files (x86)\AutoIt3\SciTE\AutoIt3Wrapper\AutoIt3Wrapper.au3" /run /prod /ErrorStdOut /in "C:\Users\W10\Desktop\New AutoIt3.au3" /UserParams    
+>20:15:08 Starting AutoIt3Wrapper v.18.708.1148.0 SciTE v.4.1.0.0   Keyboard:00000816  OS:WIN_10/  CPU:X64 OS:X64  Environment(Language:0409)  CodePage:0  utf8.auto.check:4
+>         SciTEDir => C:\Program Files (x86)\AutoIt3\SciTE   UserDir => C:\Users\W10\AppData\Local\AutoIt v3\SciTE\AutoIt3Wrapper   SCITE_USERHOME => C:\Users\W10\AppData\Local\AutoIt v3\SciTE
>Exit code: 1    Time: 1.936

Spoiler

>"C:\Program Files (x86)\AutoIt3\SciTE\..\AutoIt3.exe" "C:\Program Files (x86)\AutoIt3\SciTE\AutoIt3Wrapper\AutoIt3Wrapper.au3" /run /prod /ErrorStdOut /in "C:\Users\W10\Desktop\New AutoIt3.au3" /UserParams    
+>20:13:55 Starting AutoIt3Wrapper v.17.224.935.0 SciTE v.3.7.3.0   Keyboard:00000816  OS:WIN_10/  CPU:X64 OS:X64  Environment(Language:0409)  CodePage:0  utf8.auto.check:4
+>         SciTEDir => C:\Program Files (x86)\AutoIt3\SciTE   UserDir => C:\Users\W10\AppData\Local\AutoIt v3\SciTE\AutoIt3Wrapper   SCITE_USERHOME => C:\Users\W10\AppData\Local\AutoIt v3\SciTE
>Running AU3Check (3.3.14.2)  from:C:\Program Files (x86)\AutoIt3  input:C:\Users\W10\Desktop\New AutoIt3.au3
+>20:13:55 AU3Check ended.rc:0
>Running:(3.3.14.2):C:\Program Files (x86)\AutoIt3\autoit3_x64.exe "C:\Users\W10\Desktop\New AutoIt3.au3"    
--> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop
->20:13:55 AutoIt3.exe ended.rc:1
+>20:13:55 AutoIt3Wrapper Finished.
>Exit code: 1    Time: 0.5778

 

 

Edited August 6, 2018 by careca

[Jos]

Could you try adding #include <WinAPIFiles.au3> in autoit3wrapper.au3, below the #include<winapi.au3>  so it looks like: 

#include <Date.au3>
#include <File.au3>
#include <Misc.au3>
#include <GuiTab.au3>
#include <WinAPI.au3>
#include <WinAPIFiles.au3>
#include <Constants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

.. and see if that fixes it?

Jos

[DigDeep]

@Jos, I matched the above list of Includes into my AutoItWrapper.au3 and found #include <WinAPIFiles.au3> missing. I added just that one and saved the au3.

Launched a test code and now I am able to use both CTRL+5 and CTRL+7.

To confirm the solution, I went ahead and commented on the #include <WinAPIFiles.au3> in the wrapper.au3 and saved it and see the same 2 errors.

 

Therefore, it looks like the new version deployed is missing the WinAPFiles.au3 in the Wrapper.

[Jos]

2 minutes ago, DigDeep said:

Therefore, it looks like the new version deployed is missing the WinAPFiles.au3 in the Wrapper.

Thanks for testing....  This is indeed a change made in the current version.... but it doesn't make sense why this is not working for you as I explained before:

#Include<WinAPI.au3>  will include winapi.au3 which in turn has #Include<WinAPIFiles.au3> so it really should be included implicitly without having to specify it.
The strange thing is that it is working fine for me in that way......  I am stumped at the moment and that doesn't happen too often.

Jos 

[DigDeep]

I am pasting here the Includes I have in WinAPI.au3, WinAPIFiles.au3 and Wrapper.au3. So you can match with your version and see if there's any difference.

WinAPI.au3

#include-once

#include "AutoItConstants.au3"
#include "FileConstants.au3"
#include "MsgBoxConstants.au3"
#include "Security.au3"
#include "SendMessage.au3"
#include "StringConstants.au3"
#include "StructureConstants.au3"
#include "WinAPIConstants.au3"
#include "WinAPIError.au3"

WinAPIFiles.au3

#include-once

#include "APIFilesConstants.au3"
#include "FileConstants.au3"
#include "WinAPIMisc.au3"
#include "WinAPIShPath.au3"

AutoItWrapper.au3


#include <Date.au3>
#include <File.au3>
#include <Misc.au3>
#include <GuiTab.au3>
#include <WinAPI.au3>
#include <Constants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

#include <WinAPIFiles.au3> ; I just added this now

 

[Jos]

Your winapi.au3 looks different to mine:

#include-once

#include "AutoItConstants.au3"
#include "FileConstants.au3"
#include "MsgBoxConstants.au3"
#include "Security.au3"
#include "SendMessage.au3"
#include "StringConstants.au3"
#include "StructureConstants.au3"
#include "WinAPIConstants.au3"
#include "WinAPIConv.au3"
#include "WinAPIDlg.au3"
#include "WinAPIError.au3"
#include "WinAPIFiles.au3"
#include "WinAPIGdi.au3"
#include "WinAPIHObj.au3"
#include "WinAPIIcons.au3"
#include "WinAPIMem.au3"
#include "WinAPIMisc.au3"
#include "WinAPIProc.au3"
#include "WinAPIRes.au3"
#include "WinAPIShellEx.au3"
#include "WinAPISys.au3"

That is why I asked to check line 14 in winapi.au3, as that has the required  #include "winapifiles.au3" line.
Which version of AutoIt3 are you running?

Jos

Edited August 6, 2018 by Jos

[DigDeep]

3 minutes ago, Jos said:

Your winapi.au3 looks different to mine:

#include-once

#include "AutoItConstants.au3"
#include "FileConstants.au3"
#include "MsgBoxConstants.au3"
#include "Security.au3"
#include "SendMessage.au3"
#include "StringConstants.au3"
#include "StructureConstants.au3"
#include "WinAPIConstants.au3"
#include "WinAPIConv.au3"
#include "WinAPIDlg.au3"
#include "WinAPIError.au3"
#include "WinAPIFiles.au3"
#include "WinAPIGdi.au3"
#include "WinAPIHObj.au3"
#include "WinAPIIcons.au3"
#include "WinAPIMem.au3"
#include "WinAPIMisc.au3"
#include "WinAPIProc.au3"
#include "WinAPIRes.au3"
#include "WinAPIShellEx.au3"
#include "WinAPISys.au3"

That is why I asked to check line 14 in winapi.au3, as that has the required  #include "winapifiles.au3" line.
Which version of AutoIt3 are you running?

Jos

 

[Jos]

I was asking about AutoIt3, not SciTE, as these include files come with the AutoIt3 installer!
So I am wondering why we have different version of include files.
So tell me the AutoIt3 version and show the full winapi.au3 file in a codebox please.

Jos

[DigDeep]

My Add / Remove Program says AutoIt v3.3.14.5. Attached is the WinAPI.au3.

 

WinAPI.au3

[Jos]

That is strange as the file clearly states: 

; #INDEX# =======================================================================================================================
; Title .........: Windows API
; AutoIt Version : 3.3.14.2

and not mine:

; #INDEX# =======================================================================================================================
; Title .........: Windows API
; AutoIt Version : 3.3.14.5

which is how it should look!
Something is going wrong with installing/upgrading AutoIt3 here that needs investigation

Jos