BigDod 521 Posted June 6, 2006 Share Posted June 6, 2006 expandcollapse popup#include <GUIConstants.au3> Opt("GUICoordMode", 1) $Form1 = GUICreate("AForm1", 400, 400, -1, -1, BitOR($WS_SYSMENU,$WS_POPUPWINDOW,$WS_BORDER), 0) GUISetBkColor(0xC0DCC0) GUICtrlCreateLabel("A Round Tuit !", 50, 40, 300, 50, $SS_CENTER) GUICtrlSetFont(-1, 14, 800, 0, "MS Sans Serif") GUICtrlSetColor(-1,0xff0000) GUICtrlCreateLabel("At Long Last, we have a" & @CRLF & "sufficient quantity for each of you" & @CRLF & "to have your own. Guard it with your life." & @CRLF & "These tuits are hard to come by, especially" & @CRLF & "the round ones. This is an idespensable item." & @CRLF & "It will help you become a more efficient worker." & @CRLF & "For years we have heard people say" & @CRLF & """I'll do it as soon as I get a Round Tuit""" & @CRLF & " Now that you have a round tuit of your" & @CRLF & "very own, many things that have been" & @CRLF & "needing to be accomplished" & @CRLF & "will get done", 50, 100, 300, 250, $SS_CENTER) GUICtrlSetFont(-1, 11, 800, 0, "MS Sans Serif") GUICtrlSetColor(-1,0xff0000) _GuiRoundCorners($Form1, 0, 0, 400, 400) GUISetState(@SW_SHOW) While 1 $msg = GuiGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case Else ;;;;;;; EndSelect WEnd Func _GuiRoundCorners($h_win, $i_x1, $i_y1, $i_x3, $i_y3) Dim $pos, $ret, $ret2 $pos = WinGetPos($h_win) $ret = DllCall("gdi32.dll", "long", "CreateRoundRectRgn", "long", $i_x1, "long", $i_y1, "long", $pos[2], "long", $pos[3], "long", $i_x3, "long", $i_y3) If $ret[0] Then $ret2 = DllCall("user32.dll", "long", "SetWindowRgn", "hwnd", $h_win, "long", $ret[0], "int", 1) If $ret2[0] Then Return 1 Else Return 0 EndIf Else Return 0 EndIf EndFunc;==>_GuiRoundCorners Beware of wrapping. Time you enjoyed wasting is not wasted time ......T.S. Elliot Suspense is worse than disappointment................Robert Burns God help the man who won't help himself, because no-one else will...........My Grandmother Link to post Share on other sites
Moderators SmOke_N 212 Posted June 6, 2006 Moderators Share Posted June 6, 2006 !!! Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to post Share on other sites
RazerM 0 Posted June 6, 2006 Share Posted June 6, 2006 (edited) I like this kind of stuff! I made this a while ago cos i was bored. expandcollapse popup#include <GUIConstants.au3> $GUI = GUICreate("test",300,300,-1,-1,$WS_POPUP) GUISetBkColor(0xff0000) $Exit = GUICtrlCreateButton("Exit",130,30,40,40) GUICtrlCreateLabel("This uses a triangle, rectangle and round rectangle region, combining them with CombineMultiRgn", 60, 155, 230, 80) ;~ $a = CreateTriangleRgn(0, 0, 300, 100) ;~ $b = CreateRectRgn(140, 90, 20, 40) ;~ $c = CreateRectRgn(30, 110, 250, 80) ;~ $d = CreateRoundRectRgn(30, 145, 250, 100, 10, 100) ;~ Dim $a_rgns[4] ;~ $a_rgns[0] = $a ;~ $a_rgns[1] = $b ;~ $a_rgns[2] = $c ;~ $a_rgns[3] = $d ;~ CombineMutliRgn($a_rgns) ;~ SetWindowRgn($GUI,$a) ;~ GUISetState() ;NOTE: The below method I think is better Dim $rgn[5] $rgn[0] = CreateTriangleRgn(0, 0, 300, 100) $rgn[1] = CreateRectRgn(140, 90, 20, 40) $rgn[2] = CreateRectRgn(30, 110, 250, 80) $rgn[3] = CreateRoundRectRgn(30, 145, 250, 100, 10, 100) CombineMultiRgn($rgn) SetWindowRgn($GUI,$rgn[0]) GUISetState() While 1 $msg = GUIGetMsg() If $msg = $Exit Or $msg = $GUI_EVENT_CLOSE Then Exit WEnd ;=============================================================================== ; ; Function Name: SetWindowRgn() ; Description:: Applies a generated region to a window handle returned by GUICreate ; Parameter(s): $h_win - window handle, $rgn - The region returned by any Create..Rgn function ; Requirement(s): AutoIt Beta ; Return Value(s): None ; Author(s): Larry ; ;=============================================================================== ; Func SetWindowRgn($h_win, $rgn) DllCall("user32.dll", "long", "SetWindowRgn", "hwnd", $h_win, "long", $rgn, "int", 1) EndFunc ;=============================================================================== ; ; Function Name: CreateRectRegion() ; Description:: Creates a Rectangular Region ; Parameter(s): left, top, width, height ; Requirement(s): AutoIt Beta ; Return Value(s): Region Handle ; Author(s): RazerM ; ;=============================================================================== ; Func CreateRectRgn($l, $t, $w, $h) $ret = DllCall("gdi32.dll", "long", "CreateRectRgn", "long", $l, "long", $t, "long", $l + $w, "long", $t + $h) Return $ret[0] EndFunc ;=============================================================================== ; ; Function Name: CreateRoundRectRgn() ; Description:: Creates a Rectangular Region with rounded corners ; Parameter(s): left, top, width, height, horizontal rounding, vertical rounding ; Requirement(s): AutoIt Beta ; Return Value(s): Region Handle ; Author(s): Larry ; ;=============================================================================== ; Func CreateRoundRectRgn($l, $t, $w, $h, $e1, $e2) $ret = DllCall("gdi32.dll", "long", "CreateRoundRectRgn", "long", $l, "long", $t, "long", $l + $w, "long", $t + $h, "long", $e1, "long", $e2) Return $ret[0] EndFunc ;=============================================================================== ; ; Function Name: CombineMultiRgn() ; Description:: Combine Mutliple Regions into first variable in array ; Parameter(s): $a_rgns - Array of region variables to be combined Or use an array when creating regions ; Requirement(s): AutoIt Beta ; Return Value(s): None ; Author(s): RazerM ; ;=============================================================================== ; Func CombineMultiRgn(ByRef $a_rgns) For $i = 1 To UBound($a_rgns)-1 DllCall("gdi32.dll", "long", "CombineRgn", "long", $a_rgns[0], "long", $a_rgns[0], "long", $a_rgns[$i], "int", 2) Next EndFunc ;=============================================================================== ; ; Function Name: CombineRgn() ; Description:: Combine 2 Regions into first variable ; Parameter(s): $rgn1, $rgn2 - Two Regions to be combined ; Requirement(s): AutoIt Beta ; Return Value(s): None ; Author(s): Larry ; ;=============================================================================== ; Func CombineRgn(ByRef $rgn1, ByRef $rgn2) DllCall("gdi32.dll", "long", "CombineRgn", "long", $rgn1, "long", $rgn1, "long", $rgn2, "int", 2) EndFunc ;=============================================================================== ; ; Function Name: CreateTriangleRgn() ; Description:: Creates a triangular region ; Parameter(s): left, top, width, height ; Requirement(s): AutoIt Beta ; Return Value(s): Region Handle ; Author(s): RazerM ; ;=============================================================================== ; Func CreateTriangleRgn($l, $t, $w, $h) Return CreatePolyRgn("0,0," & $l+($w/2) & "," & $t & "," & $l+$w & "," & $t+$h & "," & $l & "," & $t+$h & "," & $l+($w/2) & "," & $t & ",0,0") EndFunc ;=============================================================================== ; ; Function Name: CreatePolyRgn() ; Description:: Create a polygon region ; Parameter(s): $pt - co-ordinates separated by a comma ; Syntax: Set of co-ordinates for certain points(must end with the starting point) ; Requirement(s): AutoIt Beta ; Return Value(s): Region handle ; Author(s): Larry, Improved by RazerM ; ;=============================================================================== ; Func CreatePolyRgn($pt) $pt = "0,0," & $pt & ",0,0" Local $ALTERNATE = 1 Local $buffer = "" $pt = StringSplit($pt,",") For $i = 1 to $pt[0] $buffer = $buffer & "int;" Next $buffer = StringTrimRight($buffer,1) $lppt = DllStructCreate($buffer) For $i = 1 to $pt[0] DllStructSetData($lppt,$i,$pt[$i]) Next $ret = DllCall("gdi32.dll","long","CreatePolygonRgn", _ "ptr",DllStructGetPtr($lppt),"int",Int($pt[0] / 2), _ "int",$ALTERNATE) $lppt = 0 Return $ret[0] EndFunc Note: it uses mostly original functions from Larry Edited June 6, 2006 by RazerM My Programs:AInstall - Create a standalone installer for your programUnit Converter - Converts Length, Area, Volume, Weight, Temperature and Pressure to different unitsBinary Clock - Hours, minutes and seconds have 10 columns each to display timeAutoIt Editor - Code Editor with Syntax Highlighting.Laserix Editor & Player - Create, Edit and Play Laserix LevelsLyric Syncer - Create and use Synchronised Lyrics.Connect 4 - 2 Player Connect 4 Game (Local or Online!, Formatted Chat!!)MD5, SHA-1, SHA-256, Tiger and Whirlpool Hash Finder - Dictionary and Brute Force FindCool Text Client - Create Rendered ImageMy UDF's:GUI Enhance - Enhance your GUIs visually.IDEA File Encryption - Encrypt and decrypt files easily! File Rename - Rename files easilyRC4 Text Encryption - Encrypt text using the RC4 AlgorithmPrime Number - Check if a number is primeString Remove - remove lots of strings at onceProgress Bar - made easySound UDF - Play, Pause, Resume, Seek and Stop. Link to post Share on other sites
BigDod 521 Posted June 7, 2006 Author Share Posted June 7, 2006 !!!I am glad someone found it amusing, perhaps it is a language thing. Time you enjoyed wasting is not wasted time ......T.S. Elliot Suspense is worse than disappointment................Robert Burns God help the man who won't help himself, because no-one else will...........My Grandmother Link to post Share on other sites
PezoFaSho 0 Posted June 7, 2006 Share Posted June 7, 2006 those are both very interesting 50% of the time, it works all the time Link to post Share on other sites
codemonkey 0 Posted July 9, 2006 Share Posted July 9, 2006 great im loving the script but i never will get round to it could any one post somthing to make the circle close after say 9 seconds thanks for any help Link to post Share on other sites
gamepin126 0 Posted July 9, 2006 Share Posted July 9, 2006 (edited) I'll get around to it as soon as I get one shaped like a giraffe. Thanks much. Edited July 9, 2006 by gamepin126 Link to post Share on other sites
MHz 80 Posted July 9, 2006 Share Posted July 9, 2006 could any one post somthing to make the circle close after say 9 seconds thanks for any helpHere ya go expandcollapse popup#include <GUIConstants.au3> Opt("GUICoordMode", 1) $Form1 = GUICreate("AForm1", 400, 400, -1, -1, BitOR($WS_SYSMENU,$WS_POPUPWINDOW,$WS_BORDER), 0) GUISetBkColor(0xC0DCC0) GUICtrlCreateLabel("A Round Tuit !", 50, 40, 300, 50, $SS_CENTER) GUICtrlSetFont(-1, 14, 800, 0, "MS Sans Serif") GUICtrlSetColor(-1,0xff0000) GUICtrlCreateLabel("At Long Last, we have a" & @CRLF & "sufficient quantity for each of you" & @CRLF & "to have your own. Guard it with your life." & @CRLF & "These tuits are hard to come by, especially" & @CRLF & "the round ones. This is an idespensable item." & @CRLF & "It will help you become a more efficient worker." & @CRLF & "For years we have heard people say" & @CRLF & """I'll do it as soon as I get a Round Tuit""" & @CRLF & " Now that you have a round tuit of your" & @CRLF & "very own, many things that have been" & @CRLF & "needing to be accomplished" & @CRLF & "will get done", 50, 100, 300, 250, $SS_CENTER) GUICtrlSetFont(-1, 11, 800, 0, "MS Sans Serif") GUICtrlSetColor(-1,0xff0000) _GuiRoundCorners($Form1, 0, 0, 400, 400) GUISetState(@SW_SHOW) $time = TimerInit() $allowed = 9; seconds <--------------- While TimerDiff($time)/1000 < $allowed $msg = GuiGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case Else ;;;;;;; EndSelect WEnd Func _GuiRoundCorners($h_win, $i_x1, $i_y1, $i_x3, $i_y3) Dim $pos, $ret, $ret2 $pos = WinGetPos($h_win) $ret = DllCall("gdi32.dll", "long", "CreateRoundRectRgn", "long", $i_x1, "long", $i_y1, "long", $pos[2], "long", $pos[3], "long", $i_x3, "long", $i_y3) If $ret[0] Then $ret2 = DllCall("user32.dll", "long", "SetWindowRgn", "hwnd", $h_win, "long", $ret[0], "int", 1) If $ret2[0] Then Return 1 Else Return 0 EndIf Else Return 0 EndIf EndFunc;==>_GuiRoundCorners @BigDod, very nice gesture, and almost true. Link to post Share on other sites
Malkey 238 Posted June 27, 2008 Share Posted June 27, 2008 (edited) A bit of useless fun, .... Continued 2 years later Added Color Regions In the spirit of the scripts, of combining regions, I have combined three examples. expandcollapse popup#include <GUIConstants.au3> #include <WindowsConstants.au3> #include <StaticConstants.au3> Global Const $WM_LBUTTONDOWN = 0x0201 ; Drag Window 1 of 3 addin ;http://www.autoitscript.com/forum/index.php?s=&showtopic=27269&view=findpost&p=193061 ;==> First Example - Several different Shaped Regions combined. And Set as Window Region === ; Posted by RazerM $GUI = GUICreate("test", 320, 250, -1, -1, $WS_POPUP) GUISetBkColor(0xff0000) GUIRegisterMsg($WM_LBUTTONDOWN, "_WinMove") ; Drag Window 2 of 3 addin GUICtrlCreateLabel("This uses a triangle, rectangle and round rectangle region, combining " & _ "them with CombineMultiRgn", 60, 155, 230, 80) GUISetState() Dim $rgn[4] $rgn[0] = CreateTriangleRgn(50, 0, 200, 100) ColorRegion($GUI, $rgn[0], 0x0000ff) $rgn[1] = CreateRoundRectRgn(30, 145, 250, 100, 100, 100) ColorRegion($GUI, $rgn[1], 0x00ff00) $rgn[2] = CreateRectRgn(140, 90, 20, 40) $rgn[3] = CreateRectRgn(30, 110, 250, 80) ColorRegion($GUI, $rgn[3], 0x00ffff) CombineMultiRgn($rgn) SetWindowRgn($GUI, $rgn[0]) $Exit = GUICtrlCreateButton("Exit", 125, 33, 40, 30) GUICtrlSetBkColor($Exit, 0x0000ff) GUICtrlSetColor($Exit, 0xffff00) Do $msg = GUIGetMsg() If $msg = $Exit Or $msg = $GUI_EVENT_CLOSE Then GUIDelete($GUI) ExitLoop EndIf Until $msg = $Exit Or $msg = $GUI_EVENT_CLOSE ;=============> End of first Example ===================== ; ; =========> Poly Region Only by Malkey ============ Global $aPoints[20][2] = [[19, 0],[323, 0],[323, 69],[181, 69],[256, 173],[319, 173],[319, 225], _ [173, 225],[173, 173],[230, 173],[147, 69],[89, 152],[120, 152],[120, 204], _ [11, 204],[11, 152],[64, 152],[120, 69],[0, 69],[0, 0]] $GUI = GUICreate("2nd Example using a polygon (19 points)", 320, 250, -1, -1);,$WS_POPUP) GUISetBkColor(0xff0000) GUISetState() Dim $rgn[2] $pts = "" For $x = 1 To $aPoints[0][0] For $y = 0 To 1 $pts &= $aPoints[$x][$y] & "," Next Next $pts = StringTrimRight($pts, 1) GUISetState() $rgn[0] = CreatePolyRgn($pts) ColorRegion($GUI, $rgn[0], 0x00FF00) SetWindowRgn($GUI, $rgn[0]) $Exit = GUICtrlCreateButton("Exit", 125, 33, 40, 30) While 1 $msg = GUIGetMsg() If $msg = $Exit Or $msg = $GUI_EVENT_CLOSE Then GUIDelete($GUI) ExitLoop EndIf WEnd ;=============> End of Second Example ===================== ; ;=====> Round Gui - Closes after 9secs by MHz similiar to Initial post by BigDod ==== Opt("GUICoordMode", 1) $Form1 = GUICreate("AForm1", 400, 400, -1, -1, BitOR($WS_SYSMENU,$WS_POPUPWINDOW,$WS_BORDER), 0) GUISetBkColor(0xC0DCC0) GUICtrlCreateLabel("A Round Tuit !", 50, 40, 300, 50, $SS_CENTER) GUICtrlSetFont(-1, 14, 800, 0, "MS Sans Serif") GUICtrlSetColor(-1,0xff0000) GUICtrlCreateLabel("At Long Last, we have a" & @CRLF & "sufficient quantity for each of you" & @CRLF & _ "to have your own. Guard it with your life." & @CRLF & "These tuits are hard to come by, especially" & _ @CRLF & "the round ones. This is an idespensable item." & @CRLF & "It will help you become a more efficient worker." & _ @CRLF & "For years we have heard people say" & @CRLF & """I'll do it as soon as I get a Round Tuit""" & @CRLF & _ " Now that you have a round tuit of your" & @CRLF & "very own, many things that have been" & @CRLF & _ "needing to be accomplished" & @CRLF & "will get done", 50, 100, 300, 250, $SS_CENTER) GUICtrlSetFont(-1, 11, 800, 0, "MS Sans Serif") GUICtrlSetColor(-1,0xff0000) _GuiRoundCorners($Form1, 0, 0, 400, 400) GUISetState(@SW_SHOW) $time = TimerInit() $allowed = 9; seconds <--------------- While TimerDiff($time)/1000 < $allowed $msg = GuiGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case Else ;;;;;;; EndSelect WEnd Func _GuiRoundCorners($h_win, $i_x1, $i_y1, $i_x3, $i_y3) Dim $pos, $ret, $ret2 $pos = WinGetPos($h_win) $ret = DllCall("gdi32.dll", "long", "CreateRoundRectRgn", "long", $i_x1, "long", $i_y1, "long", $pos[2], _ "long", $pos[3], "long", $i_x3, "long", $i_y3) If $ret[0] Then $ret2 = DllCall("user32.dll", "long", "SetWindowRgn", "hwnd", $h_win, "long", $ret[0], "int", 1) If $ret2[0] Then Return 1 Else Return 0 EndIf Else Return 0 EndIf EndFunc;==>_GuiRoundCorners ;==========> End of third Example ============================== ; ; Function Name: SetWindowRgn() ; Description:: Applies a generated region to a window handle returned by GUICreate ; Parameter(s): $h_win - window handle, $rgn - The region returned by any Create..Rgn function ; Requirement(s): AutoIt Beta ; Return Value(s): None ; Author(s): Larry ; ;=============================================================================== ; Func SetWindowRgn($h_win, $rgn) DllCall("user32.dll", "long", "SetWindowRgn", "hwnd", $h_win, "long", $rgn, "int", 1) EndFunc ;==>SetWindowRgn ;=============================================================================== ; ; Function Name: CreateRectRegion() ; Description:: Creates a Rectangular Region ; Parameter(s): left, top, width, height ; Requirement(s): AutoIt Beta ; Return Value(s): Region Handle ; Author(s): RazerM ; ;=============================================================================== ; Func CreateRectRgn($l, $t, $w, $h) $ret = DllCall("gdi32.dll", "long", "CreateRectRgn", "long", $l, "long", $t, "long", $l + $w, _ "long", $t + $h) Return $ret[0] EndFunc ;==>CreateRectRgn ;=============================================================================== ; ; Function Name: CreateRoundRectRgn() ; Description:: Creates a Rectangular Region with rounded corners ; Parameter(s): left, top, width, height, horizontal rounding, vertical rounding ; Requirement(s): AutoIt Beta ; Return Value(s): Region Handle ; Author(s): Larry ; ;=============================================================================== ; Func CreateRoundRectRgn($l, $t, $w, $h, $e1, $e2) $ret = DllCall("gdi32.dll", "long", "CreateRoundRectRgn", "long", $l, "long", $t, "long", $l + $w, _ "long", $t + $h, "long", $e1, "long", $e2) Return $ret[0] EndFunc ;==>CreateRoundRectRgn ;=============================================================================== ; ; Function Name: CombineMultiRgn() ; Description:: Combine Mutliple Regions into first variable in array ; Parameter(s): $a_rgns - Array of region variables to be combined Or use an array when creating regions ; Requirement(s): AutoIt Beta ; Return Value(s): None ; Author(s): RazerM ; ;=============================================================================== ; Func CombineMultiRgn(ByRef $a_rgns) For $i = 1 To UBound($a_rgns) - 1 DllCall("gdi32.dll", "long", "CombineRgn", "long", $a_rgns[0], "long", $a_rgns[0], "long", _ $a_rgns[$i], "int", 2) Next EndFunc ;==>CombineMultiRgn ;=============================================================================== ; ; Function Name: CombineRgn() ; Description:: Combine 2 Regions into first variable ; Parameter(s): $rgn1, $rgn2 - Two Regions to be combined ; Requirement(s): AutoIt Beta ; Return Value(s): None ; Author(s): Larry ; ;=============================================================================== ; Func CombineRgn(ByRef $rgn1, ByRef $rgn2) DllCall("gdi32.dll", "long", "CombineRgn", "long", $rgn1, "long", $rgn1, "long", $rgn2, "int", 2) EndFunc ;==>CombineRgn ;=============================================================================== ; ; Function Name: CreateTriangleRgn() ; Description:: Creates a triangular region ; Parameter(s): left, top, width, height ; Requirement(s): AutoIt Beta ; Return Value(s): Region Handle ; Author(s): RazerM ; ;=============================================================================== ; Func CreateTriangleRgn($l, $t, $w, $h) Return CreatePolyRgn("0,0," & $l + ($w / 2) & "," & $t & "," & $l + $w & "," & $t + $h & "," & $l & "," _ & $t + $h & "," & $l + ($w / 2) & "," & $t & ",0,0") EndFunc ;==>CreateTriangleRgn ;=============================================================================== ; ; Function Name: CreatePolyRgn() ; Description:: Create a polygon region ; Parameter(s): $pt - co-ordinates separated by a comma ; Syntax: Set of co-ordinates for certain points(must end with the starting point) ; Requirement(s): AutoIt Beta ; Return Value(s): Region handle ; Author(s): Larry, Improved by RazerM ; ;=============================================================================== ; Func CreatePolyRgn($pt) Local $ALTERNATE = 1 Local $buffer = "" $pt = StringSplit($pt, ",") For $i = 1 To $pt[0] $buffer = $buffer & "int;" Next $buffer = StringTrimRight($buffer, 1) $lppt = DllStructCreate($buffer) For $i = 1 To $pt[0] DllStructSetData($lppt, $i, $pt[$i]) Next $ret = DllCall("gdi32.dll", "long", "CreatePolygonRgn", _ "ptr", DllStructGetPtr($lppt), "int", Int($pt[0] / 2), _ "int", $ALTERNATE) $lppt = 0 Return $ret[0] EndFunc ;==>CreatePolyRgn ;=============================================================================== ; ; Function Name: ColorRegion() ; Description:: Add colour to a region ; Parameter(s): $hWnd - Windows handle from GUICreate(); ; $Rgn - The region to be coloured; ; $Color - The RGB colour to be used. ; Requirement(s): AutoIt ; Return Value(s): 1 ; Author(s): Malkey ; ==== and === ;Follow used with GetDCEx ;Declare Function GetDCEx Lib "user32" Alias "GetDCEx" (ByVal hwnd As Long, ByVal hrgnclip As Long, ; ByVal fdwOptions As Long) As Long ; Note :- The GetDC function retrieves a handle to a device context (DC) for the client area of a ; specified window or for the entire screen ; GetDCEx with DCX_WINDOW flag retrieves a handle to a device context (DC) for the entire ; window rectangle. ;hrgnclip :- ;Const DCX_EXCLUDERGN = 0x40 The clipping region identified by hrgnClip is excluded from the visible ; region of the returned DC. ;DCX_INTERSECTRGN = 0x80 The clipping region identified by hrgnClip is intersected with the visible ; region of the returned DC. ; ;flags (creation options):- ;DCX_WINDOW = 0x1 Returns a DC that corresponds to the window rectangle rather than the ; client rectangle. ;DCX_CACHE = 0x2 Returns a DC from the cache, rather than the OWNDC or CLASSDC window. ; Essentially overrides CS_OWNDC and CS_CLASSDC. ;DCX_PARENTCLIP = 0x20 Uses the visible region of the parent window. The parent's ; WS_CLIPCHILDREN and CS_PARENTDC style bits are ignored. The origin ; is set to the upper-left corner of the window identified by hWnd. ;DCX_CLIPSIBLINGS = 0x10 Excludes the visible regions of all sibling windows above the window ; identified by hWnd. ;DCX_CLIPCHILDREN = 0x8 Excludes the visible regions of all child windows below the window ; identified by hWnd. ;DCX_NORESETATTRS = 0x4 Does not reset the attributes of this DC to the default attributes ; when this DC is released. ;DCX_LOCKWINDOWUPDATE = 0x400 Allows drawing even if there is a LockWindowUpdate call in effect that ; would otherwise exclude this window. Used for drawing during tracking. ;DCX_EXCLUDEUPDATE = 0x100 ;DCX_INTERSECTUPDATE = 0x200 Reserved; do not use. ;DCX_NORECOMPUTE = 0x100000 ;DCX_VALIDATE = 0x200000 Reserved; do not use. ;Ref:- http://msdn.microsoft.com/en-us/library/ms533257(VS.85).aspx ; http://www.hpcc.ecs.soton.ac.uk/software/Win32API.Txt ;=============================================================================== Func ColorRegion($hWnd, $rgn, $Color) Local $Flag = 0x1 ; DCX_WINDOW = 0x1 Local $hrgnclip = 0x80 ; DCX_INTERSECTRGN = 0x80 ; DCX_EXCLUDERGN = 0x40 $Color = BitAND(BitShift(String(Binary($Color)), 8), 0xFFFFFF) ; Converts RGB to BGR colour and visa-versa $hDC = DllCall("user32.dll", "int", "GetDCEx", "hwnd", $hWnd, "long", $hrgnclip, "long", $Flag) $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", $Color) DllCall("gdi32.dll", "long", "FillRgn", "long", $hDC[0], "long", $rgn, "long", $hBrush[0]) DllCall("user32.dll", "int", "ReleaseDC", "int", $hDC[0], "hwnd", 0) Return 1 EndFunc ;==>ColorRegion ; ================================================================= ; Drag Window 3 of 3 addin ; ================================================================= Func _WinMove($hWnd, $Command, $wParam, $lParam) If BitAND(WinGetState($hWnd), 32) Then Return $GUI_RUNDEFMSG DllCall("user32.dll", "int", "SendMessage", "hWnd", $hWnd, "int", $WM_NCLBUTTONDOWN, "int", _ $HTCAPTION, "int", 0) EndFunc ;==>_WinMove Point of Interest::- In the ColorRegion() function, I had to use $hDC = DllCall("user32.dll", "int", "GetDCEx", "hwnd", $hWnd, "long", $hrgnclip, "long", $Flag) , using the $Flag parameter of DCX_WINDOW = 0x1 This returns a DC that corresponds to the window rectangle. When the commonly used GetDC command was used which returns a DC to the client rectangle, the FillRgn will appear about a title bar width below where it should appear. This only happens with a non popup style type Gui. Example:- Change Local $Flag = 0x1 about line306, to Local $Flag = 0x0 Run and notice 2nd example of Polygon, the coloured region has dropped. Edited June 27, 2008 by Malkey Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now